The strategic integration of low-dimensional InAs-based materials and emerging van der Waals systems is advancing in various scientific fields, including electronics, optics, and magnetics. With their unique properties, these InAs-based van der Waals materials and devices promise further miniaturization of semiconductor devices in line with Moore\'s Law. However, progress in this area lags behind other 2D materials like graphene and boron nitride. Challenges include synthesizing pure crystalline phase InAs nanostructures and single-atomic-layer 2D InAs films, both vital for advanced van der Waals heterostructures. Also, diverse surface state effects on InAs-based van der Waals devices complicate their performance evaluation. This review discusses the experimental advances in the van der Waals epitaxy of InAs-based materials and the working principles of InAs-based van der Waals devices. Theoretical achievements in understanding and guiding the design of InAs-based van der Waals systems are highlighted. Focusing on advancing novel selective area growth and remote epitaxy, exploring multi-functional applications, and incorporating deep learning into first-principles calculations are proposed. These initiatives aim to overcome existing bottlenecks and accelerate transformative advancements in integrating InAs and van der Waals heterostructures.

BACKGROUND: We evaluated the impact of heating conventional cigarettes with a novel heated tobacco product (HTP) device on biomarkers and cigarette use patterns in Chinese adult smokers unwilling to quit smoking.
METHODS: In this pilot randomized controlled trial, 50 eligible participants were allocated to either Control group (smoking conventional cigarettes) or HTP device group (switching to using heated conventional cigarettes by the HTP device). Participants in the HTP device group went through a 2-day run-in period then used heated conventional cigarettes exclusively for 5 days, followed by flexible use for 14 days. Five biomarkers of exposure (BoEs) were measured at baseline and on Day 7. Thirteen biomarkers of biological effect (BoBEs) were measured at baseline and on Day 21. Safety, daily cigarette consumption, craving, withdrawal symptoms, and device acceptability, were assessed.
RESULTS: BoE levels decreased by 26.4 % to 71.4% from baseline in the HTP device group, while BoBE levels did not significantly change in either group. In the HTP group, 56% exclusively used heated conventional cigarettes during the flexible use period, experiencing reduced cravings and withdrawal symptoms, while dual users consumed more cigarettes. Mild to moderate device-related reactions were reported in 36% of users. Satisfaction, taste, and harm reduction belief scores averaged 7.4, 6.6, and 8.7 (out of 10), respectively.
CONCLUSIONS: Switching to heated cigarettes with the HTP device may reduce short-term exposure to smoke toxicants. However, it can lead to increased tobacco use among dual users. Further investigation is needed to confirm these preliminary findings.
CONCLUSIONS: This study is the first to evaluate the impact of heating conventional cigarettes with a novel heated tobacco product (HTP) device on health-related biomarkers and cigarette use patterns among Chinese adult smokers. This novel HTP device can directly heat conventional cigarettes without the necessity for specifically designed tobacco products, avoiding potential additive risks of traditional HTPs. If the results of this study could be further verified by randomized controlled clinical trials with larger sample sizes, this novel HTP device could serve as a short-term harm reduction alternative for smokers unwilling to quit.

An integrated and high-throughput device for pathogen detection is crucial in point-of-care testing (POCT), especially for early diagnosis of infectious diseases and preventing the spread of infection. We developed an on-site testing platform that utilizes a centrifugal microfluidic chip and automated device to achieve high-throughput detection. The low-power (<32 W), portable (220 mm × 220 mm × 170 mm, 4 kg) device can complete bacterial lysis, nucleic acid extraction and purification, loop-mediated isothermal amplification (LAMP) reaction, and real-time fluorescence detection. Magnetic beads for nucleic acid adsorption can be mixed by applying electromagnetic fields and centrifugal forces, and the efficiency of nucleic acid extraction is improved by 60% compared to the no-mixing group. The automated nucleic acid extraction process achieves equivalent nucleic acid extraction efficiency in only 40% of the time consumed using the kit protocol. By designing the valve system and disc layout, the maximum speed required for the centrifugal microfluidic chip is reduced to 1500 rpm, greatly reducing the equipment power consumption and size. In detecting E. coli, our platform achieves a limit of detection (LOD) of 102 CFU/mL in 60 min. In summary, our active centrifugal microfluidic platform provides a solution for the integration of complex biological assays on turntables, with great potential in the application of point-of-care diagnosis.

Electrochemical CO2 reduction reaction (CO2RR) powered by renewable energy provides a promising route to CO2 conversion and utilization. However, the widely used neutral/alkaline electrolyte consumes a large amount of CO2 to produce (bi)carbonate byproducts, leading to significant challenges at the device level, thereby impeding the further deployment of this reaction. Conducting CO2RR in acidic electrolytes offers a promising solution to address the \"carbonate issue\"; however, it presents inherent difficulties due to the competitive hydrogen evolution reaction, necessitating concerted efforts toward advanced catalyst and electrode designs to achieve high selectivity and activity. This review encompasses recent developments of acidic CO2RR, from mechanism elucidation to catalyst design and device engineering. This review begins by discussing the mechanistic understanding of the reaction pathway, laying the foundation for catalyst design in acidic CO2RR. Subsequently, an in-depth analysis of recent advancements in acidic CO2RR catalysts is provided, highlighting heterogeneous catalysts, surface immobilized molecular catalysts, and catalyst surface enhancement. Furthermore, the progress made in device-level applications is summarized, aiming to develop high-performance acidic CO2RR systems. Finally, the existing challenges and future directions in the design of acidic CO2RR catalysts are outlined, emphasizing the need for improved selectivity, activity, stability, and scalability.

Thermoelectric technology, which enables a direct and pollution-free conversion of heat into electricity, provides a promising path to address the current global energy crisis. Among the broad range of thermoelectric materials, silver copper chalcogenides (AgCuQ, Q = S, Se, Te) have garnered significant attention in thermoelectric community in light of inherently ultralow lattice thermal conductivity, controllable electronic transport properties, excellent thermoelectric performance across various temperature ranges, and a degree of ductility. This review epitomizes the recent progress in AgCuQ-based thermoelectric materials, from the optimization of thermoelectric performance to the rational design of devices, encompassing the fundamental understanding of crystal structures, electronic band structures, mechanical properties, and quasi-liquid behaviors. The correlation between chemical composition, mechanical properties, and thermoelectric performance in this material system is also highlighted. Finally, several key issues and prospects are proposed for further optimizing AgCuQ-based thermoelectric materials.

A brain-computer interface (BCI) serves as a direct communication channel between brain activity and external devices, typically a computer or robotic limb. Advances in technology have led to the increasing use of intracranial electrical recording or stimulation in the treatment of conditions such as epilepsy, depression, and movement disorders. This indicates that BCIs can offer clinical neurological rehabilitation for patients with disabilities and functional impairments. They also provide a means to restore consciousness and functionality for patients with sequelae from major brain diseases. Whether invasive or non-invasive, the collected cortical or deep signals can be decoded and translated for communication. This review aims to provide an overview of the advantages of endovascular BCIs compared with conventional BCIs, along with insights into the specific anatomical regions under study. Given the rapid progress, we also provide updates on ongoing clinical trials and the prospects for current research involving endovascular electrodes.

This study aimed to evaluate the safety and efficacy of the Gekko coil system in treating intracranial aneurysms (IAs) in clinical practice.
A prospective multicenter randomized open-label parallel positive control noninferiority trial was conducted by 11 centers in China. Patients with a target IA were randomized 1:1 to coiling with either Gekko or Axium coils. The primary outcome was successful aneurysm occlusion at 6 months postoperative follow-up, whereas the secondary outcomes included the successful occlusion aneurysm rate in the immediate postoperative period, recanalization rate at the 6 months follow-up, and technical success and security.
Between May 2018 and September 2020, 256 patients were enrolled and randomized. Per-protocol analysis showed that the successful aneurysm occlusion rate at 6 months was 96.08% for the Gekko coil group compared with 96.12% in the Axium coil group, with a difference of -0.04% (P = 0.877). The successful immediate aneurysm occlusion rates were 86.00% and 77.45% in the Gekko coil group and the Axium coil group, respectively, showing no significant difference between the 2 groups (P = 0.116), whereas the recanalization rates during the 6 months follow-up were 2.02% and 1.96% in the Gekko and Axium coil groups, respectively, which was not statistically significant (P = 1.000).
This trial showed that the Gekko coil system was noninferior to the Axium coil system in terms of efficacy and safety for IA embolization. In clinical practice, the Gekko coil system can be considered safe and effective for treating patients with IA.

UNASSIGNED: Percutaneous pedicle screw fixation is a common minimally invasive treatment for traumatic thoracolumbar and lumbar fractures; however, research on hardware removal after successful healing is limited. We aimed to introduce a rapid, safe, minimally invasive, and cost-effective method for percutaneous pedicle screw removal.
UNASSIGNED: We conducted a retrospective analysis of demographic (age, sex, body mass index, alcohol use, and current smoking), clinical (hypertension and diabetes mellitus), surgical (affected levels, number of screws, time of surgery, and blood loss), and treatment cost characteristics of 92 patients who had undergone percutaneous pedicle screw removal between May 2016 and February 2023. The first 57 patients underwent the conventional method, and the remaining 35 underwent the modified method. Independent-sample t-tests and chi-square tests were used to compare continuous and categorical variables, respectively, between the two groups.
UNASSIGNED: No significant differences were observed in the demographic parameters, complications, or affected levels between the groups. However, the average surgical time (P=0.000) was significantly shorter, and the average blood loss volume (P=0.002) and total cost (P=0.000) were significantly lower in the modified group than in the conventional group.
UNASSIGNED: Compared with the conventional method, our modified method can shorten the surgical time, reduce blood loss, and reduce the total cost of treatment. It is a quick and safe minimally invasive method that does not require additional surgical instruments and is suitable for implementation in primary hospitals.

In order to simulate weight-bearing Computed Tomography (CT) examination, this study designed a simple stress position device. By analyzing the relevant data of stress position footprints and weight-bearing position footprints, the feasibility of the stress position device to simulate standing weight-bearing was verified.
This study randomly selected 25 volunteers for standing weight-bearing and stress position footprints collection, and measured the relevant indicators of stress position footprints and standing weight-bearing position footprints. Two foot and ankle surgeons conducted two measurements respectively on the footprints. Intra-observer and inter-observer reliability were calculated using intra-class correlation coefficients (ICC). Pearson correlation coefficient, ICC, scatter plot analysis, and paired t-test were used to analyze the stress and weight-bearing position data.
The intra-observer and inter-observer measurement values were reliable. There was a certain degree of correlation between the stress position footprints and weight-bearing position footprints in terms of Pearson correlation coefficient, ICC, and scatter plot analysis. Paired t-tests showed significant differences in Clarke angle (t 2.636, p .012), C-S index (t 10.568, p .000), arch indx (t 2.176, p .035), and arch lower angle (t 6.246, p .000).
The stress position device can generate a certain degree of stress, and after further optimization and improvement of the stress position device, it is feasible to apply it to weight-bearing CT examination in clinical settings.

Developing cell cryopreservation methods on chips is not only crucial for biomedical science but also represents an innovative approach for preserving traditional cell samples. This study presents a simple method for direct cell freezing and thawing on chip, allowing for long-term storage of cells. During the freezing process, cells were injected into the microchannel along with a conventional cell cryopreservation solution, and the chip was packed using a self-sealing bag containing isopropyl alcohol and then stored in a -80°C refrigerator until needed. During the thawing process, microcolumn arrays with a spacing of 8 µm were strategically incorporated into the microfluidic chip design to effectively inhibit cells from the channel. The breast cancer cell lines MDA-MB-231 and B47D demonstrated successful thawing and growth after cryopreservation for 1 month to 1 year. These findings offer a direct cell freezing and thawing method on a microfluidic chip for subsequent experiments.