This study aims to explore the essential functional requirements associated with controlling the proliferation of microbes in the domain of textiles used in public health areas. Herein, three antimicrobial agents, specifically iodopropylbutylcarbamate (IPBC), 1-hydroxypyridine-2-thioketone zinc (ZPT), and 2-octyl-3-isothiazolinone (OIT), were chosen for fabric finishing based on their notable effectiveness, minimal toxicity, cost-efficiency, and chemical stability. Utilizing Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) as representative bacterial strains, the Minimum Inhibitory Concentration (MIC50) of individual and combined antimicrobial agents was measured, and their antimicrobial effectiveness was rigorously evaluated. Concurrently, the antimicrobial effectiveness, whiteness, and mechanical durability of the fabric following antimicrobial treatment were thoroughly examined. The results demonstrate that some combinations of the three antimicrobial agents elicit additive effects on both S. aureus and E. coli. Notably, at an equivalent ratio of IPBC, ZPT, and OIT and a total concentration of 0.2 wt. %, the inhibition rates against both bacterial strains surpass 99%. Upon application to nylon fabric, the treated material demonstrates significant antimicrobial properties, with minimal reduction observed in the whiteness and tensile strength of the treated nylon. This study provides practicable strategies relevant to the production of textiles endowed with antimicrobial properties.

ZnO nanorod nonwoven fabrics (ZNRN) were developed through hydrothermal synthesis to facilitate the prevention of the transmission of respiratory pathogens. The superhydrophobicity and antibacterial properties of ZNRN were improved through the response surface methodology. The synthesized material exhibited significant water repellency, indicated by a water contact angle of 163.9°, and thus demonstrated antibacterial rates of 91.8% for Escherichia coli (E. coli) and 79.75% for Staphylococcus aureus (S. aureus). This indicated that E. coli with thinner peptidoglycan may be more easily killed than S. aureus. This study identified significant effects of synthesis conditions on the antibacterial effectiveness, with comprehensive multivariate analyses elucidating the underlying correlations. In addition, the ZnO nanorod structure of ZNRN was characterized through SEM and XRD analyses. It endows the properties of superhydrophobicity (thus preventing bacteria from adhering to the ZNRN surface) and antibacterial capacity (thus damaging cells through the puncturing of these nanorods). Consequently, the alignment of two such features is desired to help support the development of personal protective equipment, which assists in avoiding the spread of respiratory infections.

The rapid absorption of water from the blood to concentrate erythrocytes and platelets, thus triggering quick closure, is important for hemostasis. Herein, expansion-clotting chitosan fabrics are designed and fabricated by ring spinning of polylactic acid (PLA) filaments as the core layer and highly hydrophilic carboxyethyl chitosan (CECS) fibers as the sheath layer, and subsequent knitting of obtained PLA@CECS core spun yarns. Due to the unidirectional fast-absorption capacity of CECS fibers, the chitosan fabrics can achieve erythrocytes and platelets aggregate quickly by concentrating blood, thus promoting the formation of blood clots. Furthermore, the loop structure of coils formed in the knitted fabric can help them to expand by absorbing water to close their pores, providing effective sealing for bleeding. Besides, They have enough mechanical properties, anti-penetrating ability, and good tissue-adhesion ability in wet conditions, which can form a physical barrier to resist blood pressure during hemostasis and prevent them from falling off the wound, thus enhancing hemostasis synergistically. Therefore, the fabrics exhibit superior hemostatic performance in the rabbit liver, spleen, and femoral artery puncture injury model compared to the gauze group. This chitosan fabric is a promising hemostatic material for hemorrhage control.

The abrasion of synthetic textile fibers is a significant factor in the generation of environmental microplastic fibers (MPFs). The extent to which polymer sponges designed specifically for surface cleaning have a tendency to release MPFs during normal use remains unknown. Here, the tribological behaviors of melamine cleaning sponges (also known as \"magic erasers\") with different strut densities against metal surfaces of different roughness were investigated using a reciprocating abrader. The MPFs formed by sponge wear under various conditions were characterized in terms of their morphology, composition, and quantity. They were mainly composed of poly(melamine-formaldehyde) polymer with linear or branched fiber morphologies (10-405 μm in length), which were formed through deformation and fracture of the struts within open cells of the sponges, facilitated by friction-induced polymer decomposition. The rate and capability of MPF production generally increased with increasing roughness of the metal surface and density of the struts, respectively. The sponge wear could release 6.5 million MPFs/g, which could suggest a global overall emission of 4.9 trillion MPFs due to sponge consumption. Our study reveals a hitherto unrecognized source of the environmental MPF contamination and highlights the need to evaluate exposure risks associated with these new forms of MPFs.

Ecofriendly fabrics with antibacterial and anti-adhesion properties have been attracted an increasing attention in recent years. Herein, natural menthol modified polyacrylate (PMCA) antibacterial adhesion agent was synthesized by esterification and polymerisation while natural pterostilbene-grafted-chitosan (PGC) antibacterial agent was prepared through Mannich reaction. The antibacterial and anti-adhesion cotton fabric was fabricated through durable PMCA dip finishing and then layer-by-layer self-assembly of PGC. The results showed that the antibacterial adhesion rates and antibacterial rates of the dual-function cotton fabric against Staphylococcus aureus and Escherichia coli reached up to 99.9 %. Its antibacterial adhesion rates improved by 36.1 % and 40.1 % in comparison with those of cotton fabric treated by menthol alone. Meanwhile against S. aureus, the dual-function cotton fabrics improved the antibacterial rates by 56.7 % and 36.4 %, respectively, from those of chitosan- and pterostilbene-treated fabrics. Against E. coli, the improvements were 89.4 % and 24.8 %, respectively. After 20 household washings, the dual-function cotton fabric maintained >80 % of its original anti-adhesion and antibacterial rates against both species. The dual-function cotton fabric also possessed safe and excellent wearability.

In this study, modified polyamide fibers were used as biocarriers to enrich dense biofilms in a multi-stage biological contact oxidation reactor (MBCOR) in which partitioned wastewater treatment zone (WTZ) and bioaugmentation zone (BAZ) were established to enhance the removal of methyl orange (MO) and its metabolites while minimizing sludge yields. WTZ exhibited high biomass loading capacity (5.75 ± 0.31 g/g filler), achieving MO removal rate ranging from 68 % to 86 % under different aeration condition within 8 h in which the most dominant genus Chlorobium played an important role. In the BAZ, Pseudoxanthomonas was the dominant genus while carbon starvation stimulated the enrichment of chemoheterotrophy and aerobic_chemoheterotrophy genes thereby enhanced the microbial utilization of cell-released substrates, MO as well as its metabolic intermediates. These results revealed the mechanism bioaugmentation on MBCOR in effectively eliminating both MO and its metabolites.

Smart textiles with flame retardant and fire-warning functions have received more and more attention. However, improving the fire-warning response sensitivity and long-term responsiveness of the smart textiles is a top priority. In this research, flame retardant and fire-warning cotton fabrics were prepared by layer-by-layer assembly composite coating consisting of bio-based flame retardants composed of chitosan (CS) and phytic acid (PA) and carbon-based nanomaterials composed of carbon nanotubes (CNTs) and graphene oxide (GO). The PA-GO/CS-CNTs coated cotton fabric showed excellent flame retardancy with a limiting oxygen index (LOI) value of 31 %, and the coated fabrics could self-extinguish rapidly when the flame was removed. The fire hazard of the coated fabric was significantly reduced by reducing the 45.77 % of peak heat release rate, 29.69 % of total heat release and 81.9 % of total smoke production. The PA-GO/CS-CNTs coated cotton fabric showed ultra-fast fire warning response with the response time of 1.0 s. And the fire-warning response time of the coated cotton fabric could last longer than 600 s revealing it possessed the continuous fire warning response property. This research provides a new strategy to prepare the smart fireproof textiles with flame retardant and fire-warning functions to broaden its application in early fire-warning.

The study explores the strategic pricing and quality improvement decisions under uncertain demand in a three-layer textile and garment supply chain. According to whether the fabric manufacturer (FM) invests in quality or not and whether the garment manufacturer (GM) or garment retailer (GR) is willing to share the costs or not, five game models are constructed to investigate the impact of different members\' cost sharing on the optimal decisions and profits. By conducting a theoretical and numerical analysis, we find that: (1) The GM\'s or GR\'s cost sharing plays a positive effect on the quality improvement, as for whose cost sharing performs better in improving the quality depending on the proportion of cost sharing, and the quality improvement is highest with both members share the costs simultaneously. (2) The FM receives the highest profit when both members share the costs simultaneously, however, whose cost sharing is more profitable for the FM is also related to the proportion of cost sharing; in short, the FM always benefits from the cost sharing, no matter one member does this or two members do this. (3) The GM (GR) gains the highest profit when only the GR (GM) shares the costs, and the results indicate that if one member has shared the costs, whether the other member engaging in cost sharing could benefit the former depending on their proportions. Specifically, when the GM (GR) chooses to share the costs and the proportion is relatively low, the GR(GM) joining in cost sharing is beneficial to the former; otherwise, is harmful.

Lignocellulose is mainly composed of hydrophobic lignin and hydrophilic polysaccharide polymers, contributing to an indispensable carbon resource for green biorefineries1,2. When chemically treated, lignin is compromised owing to detrimental intra- and intermolecular crosslinking that hampers downstream process3,4. The current valorization paradigms aim to avoid the formation of new C-C bonds, referred to as condensation, by blocking or stabilizing the vulnerable moieties of lignin5-7. Although there have been efforts to enhance biomass utilization through the incorporation of phenolic additives8,9, exploiting lignin\'s proclivity towards condensation remains unproven for valorizing both lignin and carbohydrates to high-value products. Here we leverage the proclivity by directing the C-C bond formation in a catalytic arylation pathway using lignin-derived phenols with high nucleophilicity. The selectively condensed lignin, isolated in near-quantitative yields while preserving its prominent cleavable β-ether units, can be unlocked in a tandem catalytic process involving aryl migration and transfer hydrogenation. Lignin in wood is thereby converted to benign bisphenols (34-48 wt%) that represent performance-advantaged replacements for their fossil-based counterparts. Delignified pulp from cellulose and xylose from xylan are co-produced for textile fibres and renewable chemicals. This condensation-driven strategy represents a key advancement complementary to other promising monophenol-oriented approaches targeting valuable platform chemicals and materials, thereby contributing to holistic biomass valorization.

BACKGROUND: The contact plate method is widely accepted and used in various fields where hygiene and contamination levels are crucial. Evidence regarding the applicability of the contact plate method for sampling fabric microbial contamination levels in real medical environments was limited. This study aimed to assess the applicability of the contact plate method for detecting microbial contamination on medical fabrics in a real healthcare environment, thereby providing a benchmark for fabric microbial sampling methods.
METHODS: In a level three obstetrics ward of a hospital, twenty-four privacy curtains adjacent to patient beds were selected for this study. The contact plate and swab method were used to collect microbial samples from the privacy curtains on the 1st, 7th, 14th, and 28th days after they were hung. The total colony count on each privacy curtain surface was calculated, and microbial identification was performed.
RESULTS: After excluding the effects of time, room type, and curtain location on the detected microbial load, the linear mixed-effects model analysis showed that contact plate method yielded lower colony counts compared to swab method (P < 0.001). However, the contact plate method isolated more microbial species than swab method (P < 0.001). 291 pathogenic strains were isolated using the contact plate method and 133 pathogenic strains were isolated via the swab method. There was no difference between the two sampling methods in the detection of gram-negative bacteria (P = 0.089). Furthermore, the microbial load on curtains in double-occupancy rooms was lower than those in triple-occupancy rooms (P = 0.021), and the microbial load on curtains near windows was lower than that near doors (P = 0.004).
CONCLUSIONS: Contact plate method is superior to swab method in strain isolation. Swab method is more suitable for evaluating the bacterial contamination of fabrics.