Xylose plants (produce xylose from corncob through dilute acid treatment) generate a large amount of corncob residue (CCR), most of which are burned and lacked of valorization. Herein, to address this issue, CCR was directly used as starting material for high-solid loading enzymatic hydrolysis via a simple strategy by combining PFI homogenization (for sufficient mixing) with batch-feeding. A maximum glucose concentration of 187.1 g/L was achieved after the saccharification with a solid loading of 25 wt% and enzyme dosage of 10 FPU/g-CCR. Furthermore, the residue of enzymatic hydrolysis (REH) was directly used as a bio-adhesive for plywood production with both high dry (1.7 MPa) and wet (1.1 MPa) surface bonding strength (higher than the standard (0.7 MPa)), and the excellent adhesion was due to the interfacial crosslinking between the REH adhesive (containing lignin, free glucose, and nanosized fibers) and cell wall of woods. Compared with traditional reported adhesives, the REH bio-adhesive has advantages of formaldehyde-free, good moisture resistance, green process, relatively low cost and easy realization. This study presents a simple and effective strategy for better utilization of CCR, which also provides beneficial reference for the valorization of other kinds of lignocellulosic biomass.

Sand pear is the main cultivated pear species in China, and brown peel is a unique feature of sand pear. The formation of brown peel is related to the activity of the cork layer, of which lignin is an important component. The formation of brown peel is intimately associated with the biosynthesis and accumulation of lignin; however, the regulatory mechanism of lignin biosynthesis in pear peel remains unclear. In this study, we used a newly bred sand pear cultivar \'Xinyu\' as the material to investigate the biosynthesis and accumulation of lignin at nine developmental stages using metabolomic and transcriptomic methods. Our results showed that the 30 days after flowering (DAF) to 50DAF were the key periods of lignin accumulation according to data analysis from the assays of lignin measurement, scanning electron microscope (SEM) observation, metabolomics, and transcriptomics. Through weighted gene co-expression network analysis (WGCNA), positively correlated modules with lignin were identified. A total of nine difference lignin components were identified and 148 differentially expressed genes (DEGs), including 10 structural genes (PAL1, C4H, two 4CL genes, HCT, CSE, two COMT genes, and two CCR genes) and MYB, NAC, ERF, and TCP transcription factor genes were involved in lignin metabolism. An analysis of RT-qPCR confirmed that these DEGs were involved in the biosynthesis and regulation of lignin. These findings further help us understand the mechanisms of lignin biosynthesis and provide a theoretical basis for peel color control and quality improvement in pear breeding and cultivation.

Schima superba, commonly known as the Chinese guger tree, is highly adaptable and tolerant of poor soil conditions. It is one of the primary species forming the evergreen broad-leaved forests in southern China. Dirigent proteins (DIRs) play crucial roles in the synthesis of plant lignin and lignans, secondary metabolism, and response to adversity stress. However, research on the DIR gene family in S. superba is currently limited. This study identified 24 SsDIR genes, categorizing them into three subfamilies. These genes are unevenly distributed across 13 chromosomes, with 83% being intronless. Collinearity analysis indicated that tandem duplication played a more significant role in the expansion of the gene family compared to segmental duplication. Additionally, we analyzed the expression patterns of SsDIRs in different tissues of S. superba. The SsDIR genes exhibited distinct expression patterns across various tissues, with most being specifically expressed in the roots. Further screening identified SsDIR genes that may regulate drought stress, with many showing differential expression under drought stress conditions. In the promoter regions of SsDIRs, various cis-regulatory elements involved in developmental regulation, hormone response, and stress response were identified, which may be closely related to their diverse regulatory functions. This study will contribute to the further functional identification of SsDIR genes, providing insights into the biosynthetic pathways of lignin and lignans and the mechanisms of plant stress resistance.

This study systematically investigated the physiological and molecular responses of the wheat mutant \'XC-MU201\' under high-temperature stress through comprehensive transcriptome analysis and physiological measurements. RNA sequencing of 21 samples across seven different treatment groups revealed, through Weighted Gene Co-expression Network Analysis (WGCNA), 13 modules among 9071 genes closely related to high-temperature treatments. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analyses showed significant enrichment of lignin biosynthesis-related modules under high-temperature conditions, especially at the H-10DAT, H-20DAT, and H-30DAT time points. Experimental results demonstrated a significant increase in lignin content in high-temperature-treated samples, confirmed by tissue staining methods, indicating wheat\'s adaptation to heat damage through lignin accumulation. The phenylalanine ammonia-lyase gene (TaPAL33) was significantly upregulated under high-temperature stress, peaking at H-30DAT, suggesting its critical role in cellular defense mechanisms. Overexpression of TaPAL33 in the wheat variety \'Xinchun 11\' enhanced lignin synthesis but inhibited growth. Subcellular localization of GFP-labeled TaPAL33 in tobacco cells showed its distribution mainly in the cytoplasm and cell membrane. Transgenic wheat exhibited higher PAL enzyme activity, enhanced antioxidant defense, and reduced oxidative damage under high-temperature stress, outperforming wild-type wheat. These results highlight TaPAL33\'s key role in improving wheat heat tolerance and provide a genetic foundation for future research and applications.

As one of the most important food crops in the world, rice yield is directly related to national food security. Lodging is one of the most important factors restricting rice production, and the cultivation of rice varieties with lodging resistance is of great significance in rice breeding. The lodging resistance of rice is directly related to the mechanical strength of the stalks. In this paper, we reviewed the cell wall structure, its components, and its genetic regulatory mechanism, which improved the regulatory network of rice stalk mechanical strength. Meanwhile, we analyzed the new progress in genetic breeding and put forward some scientific problems that need to be solved in this field in order to provide theoretical support for the improvement and application of rice breeding.

Lignin, a natural pol2ymer with a complex structure that is difficult to separate, is prone to C-C bond condensation during the separation process. To reduce the condensation of lignin, here, a novel method is proposed for separating the components by using a combination of maleic acid (MA)/ozone (O3) to co-treat wheat straw. The removal of lignin, glucan, and xylan was 38.07 ± 0.2%, 31.44 ± 0.1%, and 71.98 ± 0.1%, respectively, under the conditions of ball-milling of wheat straw for 6 h, reaction temperature of 60 °C, and O3 holding time of 9 min. Lignin-rich solutions were collected to extract the dissolved lignin (DL) after washing the treated samples. The DL obtained under MA/O3 conditions had a carboxyl group (-COOH) content of 2.96 mmol/g. The carboxyl group of MA underwent esterification with the hydroxyl group (-OH) at the γ position of lignin and O3 reacted on the positions of the lignin side chain or the phenolic ring, resulting in a break in the side chain and the opening of the phenolic ring to introduce the carboxyl group. The 2D-HSQC-NMR results revealed that the phenolic ring-opening reaction of lignin in the presence of O3 was essentially free of β-β and β-5 condensation bonds.

Lignin-based carbon nanomaterials offer several advantages, including biodegradability, biocompatibility, high specific surface area, ease of functionalization, low toxicity, and cost-effectiveness. These materials show promise in biochemical sensing applications, particularly in the detection of metal ions, organic compounds, and human biosignals. Various methods can be employed to synthesize carbon nanomaterials with different dimensions ranging from 0D to 3D, resulting in diverse structures and physicochemical properties. This study provides an overview of the preparation techniques and characteristics of multidimensional (0-3D) lignin-based carbon nanomaterials, such as carbon dots (CDs), carbon nanotubes (CNTs), graphene, and carbon aerogels (CAs). Additionally, the sensing capabilities of these materials are compared and summarized, followed by a discussion on the potential challenges and future prospects in sensor development.

Using lignin as a raw material to prepare fluorescent nanomaterials represents a significant pathway toward the high-value utilization of waste biomass. In this study, Ni-doped lignin carbon dots (Ni-LCDs) were rapidly synthesized with a yield of 63.22 % and a quantum yield of 8.25 % using a green and simple hydrothermal method. Exploiting the inner filter effect (IFE), Cr(VI) effectively quenched the fluorescence of the Ni-LCDs, while the potent reducing agent ascorbic acid (AA) restored the quenched fluorescence, thus establishing a highly sensitive fluorescence switch sensor platform for the sequential detection of Cr(VI) and AA. Importantly, the integration of a smartphone facilitated the portability of Cr(VI) and AA detection, enabling on-site, in-situ, and real-time monitoring. Ultimately, the developed fluorescence and smartphone-assisted sensing platform was successfully applied to detect Cr(VI) in actual water samples and AA in various fruits. This study not only presents an efficient method for the conversion and utilization of waste lignin but also broadens the application scope of the CDs in the field of smart sensors.

In the catalytic transformation of bio-oil into liquid fuels having alkanes via hydrodeoxygenation (HDO), the acid and metal sites in the catalyst are pivotal for promoting the HDO of lignin-derived phenolic compounds. This study introduces a novel bifunctional catalyst comprising phosphomolybdenum-vanadium heteropolyacids (H4PMo11VO40) coupled with Ni/C. The HDO reaction of the model compound guaiacol was carried out under reaction conditions of 230 °C, revealing the superior performance of H4PMo11VO40 with Ni/C catalysts compared to the conventional acids, even at low dosage. The Keggin structure of H4PMo11VO40 provided a solid catalyst with strong acidic and redox properties, alongside advantages such as ease of synthesis, cost-effectiveness, and tunable acid and redox properties at the molecular level. Characterization of Ni/C and the prepared acid demonstrated favorable pore structure with a mesopore volume of 0.281 cm3/g and an average pore size of 3.404 nm, facilitating uniform distribution and catalytic activity of Ni-metal. Incorporating acid enhances the acidic sites, fostering synergistic interactions between metal and acidic sites within the catalyst, thereby significantly enhancing HDO performance. Guaiacol conversion at 230 °C reached 100%, with a cyclohexane selectivity of 89.3%. This study presents a promising pathway for converting lignin-derived phenolic compounds.

A flexible phase-change film with thermal management and microwave absorption capabilities was developed for use in wearable devices. The film was created using a solution casting method based on a porous carbon-loaded eicosane (LP33/EI) material. LP33 served as the porous encapsulation medium, while Eicosane (EI) acted as the phase change component. The flexible substrate was a blend of polyvinyl alcohol (PVA) and bacterial cellulose nanocellulose (BC). The ultrathin film had a thickness of 0.262 mm, and LP33/EI-4 exhibited exceptional mechanical strength of 188 MPa. Testing revealed that the phase transition process had melting and crystallization enthalpies of 134.71 J/g and 126.11 J/g, respectively. The encapsulation structure effectively prevented any leakage during the phase transition process. Under simulated solar irradiation of 200 mW/cm2, LP33/EI-4 achieved a photothermal conversion efficiency (η) of 89.46 %. Additionally, the porous LP33 structure and high dielectric loss contributed to remarkable microwave absorption capabilities of -42 dB in the X-band and - 52 dB in the Ku-band. Overall, LP33/EI films demonstrated exceptional performance in thermal management, energy storage, and microwave absorption, making them an ideal choice for a variety of applications in wearable devices.