OBJECTIVE: To compare the clinical efficacy and safety of single-use and reusable digital flexible ureteroscopy for the treatment of lower pole stones.
METHODS: We enrolled 135 patients underwent reusable flexible ureteroscopy (FURS) and 78 patients underwent single-use digital FURS. Demographic, clinical variables, anatomical parameters of the lower calyx and perioperative indicators were compared in the two groups.
RESULTS: Thirty-six patients in the infundibuloureter angle (IPA) < 45° subgroup had a mini-percutaneous nephrolithotomy (mini-PCNL), including 25 patients in the reusable FURS group and 11 patients in the single-use FURS group. The demographic and clinical variables in the two FURS groups were comparable. There was no statistical difference in the success rate of stone searching (P > 0.05). In terms of the success rate of lithotripsy, there was also no statistical difference in the IPA ≥ 45° subgroup (P > 0.05), whereas single-use FURS was superior in the IPA < 45° subgroup (χ2 = 6.513, P = 0.011). The length of the working fiber in the reusable FURS and single-use FURS groups was 3.20 ± 0.68 mm and 1.75 ± 0.47 mm, respectively (t = 18.297, P < 0.05). The use of a stone basket in the reusable FURS (31/135, 23.0%) was significantly higher than that in the single-use FURS (8/78, 10.3%) (χ2 = 5.336, P = 0.021). Compared with the reusable FURS group, the single-use FURS group had shorter operation times (P < 0.05) and higher stone-free rate (SFR) (χ2 = 4.230, P = 0.040). There was no statistical difference in the intraoperative transfer of mini-PCNL and postoperative complications between the two groups (P > 0.05).
CONCLUSIONS: Single-use and reusable FURS are alternative methods for removal of lower pole stones (i.e., 2 cm or less). Single-use FURS has a high success rate of lithotripsy, shorter operation time, and high stone-free rate.

UNASSIGNED: Ultrasound diagnosis and treatment is easy to perform and takes little time. It is widely used in clinical practice thanks to its non-invasive, real-time, and dynamic characteristics. In the process of ultrasound diagnosis and treatment, the probe may come into contact with the skin, the mucous membranes, and even the sterile parts of the body. However, it is difficult to achieve effective real-time disinfection of the probes after use and the probes are often reused, leading to the possibility of the probes carrying multiple pathogenic bacteria. At present, the processing methods for probes at home and abroad mainly include probe cleaning, probe disinfection, and physical isolation (using probe covers or sheaths). Yet, each approach has its limitations and cannot completely prevent probe contamination and infections caused by ultrasound diagnosis and treatment. For example, when condoms are used as the probe sheath, the rate of condom breakage is relatively high. The cutting and fixing of cling film or freezer bags involves complicated procedures and is difficult to perform. Disposable plastic gloves are prone to falling off and causing contamination and are hence not in compliance with the principles of sterility. Furthermore, the imaging effect of disposable plastic gloves is poor. Therefore, there is an urgent need to explore new materials to make probe covers that can not only wrap tightly around the ultrasound probe, but also help achieve effective protection and rapid reuse. Based on the concept of physical barriers, we developed in this study a heat sealing system for the rapid reuse of ultrasound probes. The system uses a heat sealing device to shrink the protective film so that it wraps tightly against the surface of the ultrasound probe, allowing for the rapid reuse of the probe while reducing the risk of nosocomial infections. The purpose of this study is to design a heat sealing system for the rapid reuse of ultrasound probes and to verify its application effect on the rapid reuse of ultrasound probes.
UNASSIGNED: 1) The heat sealing system for the rapid reuse of ultrasound probes was designed and tested by integrating medical and engineering methods. The system included a protective film (a multilayer co-extruded polyolefin thermal shrinkable film) and a heat sealing device, which included heating wire components, a blower, a photoelectric switch, temperature sensors, a control and drive circuit board, etc. According to the principle of thermal shrinkage, the ultrasound probe equipped with thermal shrinkable film was rapidly heated and the film would wrap closely around the ultrasound probe placed on the top of the heat sealing machine. The ultrasound probe was ready for use after the thermal shrinkage process finished. Temperature sensors were installed on the surface of the probe to test the thermal insulation performance of the system. The operation procedures of the system are as follows: placing the ultrasound probe covered with the protective film in a certain space above the protective air vent, which is detected by the photoelectric switch; the heating device heats the thermal shrinkable film with a constant flow of hot air at a set temperature value. Then, the probe is rotated so that the thermal shrinkable film will quickly wrap around the ultrasound probe. After the heat shrinking is completed, the probe can be used directly. 2) Using the convenience sampling method, 90 patients from the Department of Anesthesiology and Perioperative Medicine, the First Affiliated Hospital of Xi\'an Jiaotong University were included as the research subjects. All patients were going to undergo arterial puncture under ultrasound guidance. The subjects were divided into 3 groups, with 30 patients in each group. Three measures commonly applied in clinical practice were used to process the probes in the three groups and water-soluble fluorescent labeling was applied around the puncture site before use. In the experimental group, the probes were processed with the heat sealing system. The standard operating procedures of the heat sealing system for rapid reuse of ultrasonic probes were performed to cover the ultrasonic probe and form a physical barrier to prevent probe contamination. There were two control groups. In control group 1, disinfection wipes containing double-chain quaternary ammonium salt were used to repeatedly wipe the surface of the probe for 10-15 times, and then the probe was ready for use once it dried up. In the control group 2, a disposable protective sheath was used to cover the front end of the probe and the handle end of the sheath was tied up with threads. Comparison of the water-soluble fluorescent labeling on the surface of the probe (which reflected the colony residues on the surface of the probe) before and after use and the reuse time (i.e., the lapse of time from the end of the first use to the beginning of the second use) were made between the experimental group and the two control groups.
UNASSIGNED: 1) The temperature inside the ultrasound probe was below 40 ℃ and the heat sealing system for rapid reuse did not affect the performance of the ultrasound probe. 2) The reuse time in the heat sealing system group, as represented by (median [P25, P75]), was (8.00 [7.00, 10.00]) s, which was significantly lower than those of the disinfection wipe group at (95.50 [8.00, 214.00]) s and the protective sleeve group at (25.00 [8.00, 51.00]) s, with the differences being statistically significant (P<0.05). No fluorescence residue was found on the probe in either the heat sealing system group or the protective sheath group after use. The fluorescence residue in the heat sealing system group was significantly lower than that in the disinfection wipes group, showing statistically significant differences (χ 2=45.882, P<0.05).
UNASSIGNED: The thermal shrinkable film designed and developed in this study can be cut and trimmed according to the size of the equipment. When the film is heated, it shrinks and wraps tightly around the equipment, forming a sturdy protective layer. With the heat sealing system for rapid reuse of ultrasonic probes, we have realized the semi-automatic connection between the thermal shrinkable film and the heating device, reducing the amount of time-consuming and complicated manual operation. Furthermore, the average reuse time is shortened and the system is easy to use, which contributes to improvements in the reuse and operation efficiency of ultrasound probes. The heat sealing system reduces colony residues on the surface of the probe and forms an effective physical barrier on the probe. No probes were damaged in the study. The heat sealing system for rapid reuse of ultrasonic probes can be used as a new method to process the ultrasonic probes.

Disposable surgical masks undeniably provide important personal protection in daily life, but the potential health risks by the release of microplastic fibres from masks should command greater attention. In this study, we conducted a microplastic fibre release simulation experiment by carrying masks in a pocket and reusing them, to reveal the number and morphological changes of microfibres released. Fourier transform infrared spectrometry, scanning electron microscopy, and optical microscopy were employed to analyse the physical and chemical characteristics of the mask fibres. The results indicated that the reuse of disposable masks led to a significant release of microplastic fibres, potentially leading to their migration into the respiratory system. Furthermore, the release of microplastic fibres increased with prolonged external friction, particularly when masks were stored in pockets. The large-scale release of microplastic fibres due to mask reuse raises concerns about potential health risks to the human respiratory system. The reuse of disposable masks should be also strictly avoided in daily life in the future. Furthermore, the current study also established a robust foundation for future research endeavours on health risks associated with microplastic fibres entering the respiratory system through improper mask usage.

China\'s enterprises of waste electrical and electronic equipment (WEEE) recycling suffer from low profitability that is highly dependent on government subsidies. This low economic gain impedes the sustainable growth of China\'s WEEE-recycling sector and also adds to the government\'s financial burden. Prior life-cycle studies have approved the carbon reduction potentials or net carbon credit of recycling WEEE. However, policymakers fail to know whether the revenue from selling carbon credits can offset the government\'s financial subsidy. We performed life-cycle and cost-benefit analyses for a case recycling enterprise that processes six categories of household appliances. The results show that the reduction potentials of greenhouse gases range from 930-3450 kgCO2e by recycling per ton of household appliances and materials substitution. The recycling enterprise would gain extra revenue ranging from 32 to 160 RMB per ton of appliance if the carbon credits were sold at China\'s current carbon price, i.e., 45-60 RMB tCO2e-1. Recycling waste refrigerators exhibits the highest carbon revenue, offsetting 6-17% of the government\'s financial subsidy. Microcomputers, by contrast, indicate the lowest carbon revenue, equivalent to 1-3% of its highest government subsidy. For each household appliance category, when the carbon price reaches 270-600 RMB tCO2e-1, selling carbon credits can fully offset the government\'s financial subsidy. Constrained by the processing capacity of the case enterprise, optimizations for appliance-recycling composition contribute a 15-25% profit growth to the current economic gains. Interpreting the specific profit depends on the predefined scenarios of carbon price and the substitution rate of the regenerated materials for the virginal ones. Our findings show that raising the profitability of WEEE recycling enterprises through the carbon trading policy contributes to the sustainable growth of China\'s WEEE-recycling sector while alleviating the government\'s financial burden.

It has become a common consensus that resource conservation and intensive recycling for improving resource utilization efficiency is an important way to achieve carbon peak and carbon neutrality(dual carbon). Traditonal Chinese medicine(TCM)resources as national strategic resources are the material basis and fundamental guarantee for the development of TCM industry and health services. However, the rapid growth of China\'s TCM industry and the continuous expansion and extension of the industrial chain have exposed the low efficiency of TCM resources. Resource waste and environmental pollution caused by the treatment and discharge of TCM waste have emerged as major problems faced by the development of the industry, which has aroused wide concern. Considering the dual carbon goals, this paper expounds the role and potential of TCM resource recycling and circular economy industry development. Taking the typical model of TCM resource recycling as the case of circular economy industry in reducing carbon source and increasing carbon sink, this paper puts forward the suggestions for the TCM circular economy industry serving the double carbon goals. The suggestions mainly include strengthening the policy and strategic leading role of the double carbon goals, building an objective evaluation system of low-carbon emission reduction in the whole industrial chain of TCM resources, building an industrial demonstration park for the recycling of TCM resources, and promoting the establishment of a circular economy system of the whole industrial chain of TCM resources. These measures are expected to guide the green transformation of TCM resource industry from linear economic model to circular economy model, provide support for improving the utilization efficiency and sustainable development of TCM resources, and facilitate the low-carbon and efficient development of TCM resource industry and the achievement of the double carbon goals.

With the vigorous rise of online third-party recycling platforms, dual-channel recycling has become the primary recycling mode in the reverse supply chain (RSC). However, as the main body of recycling, consumers have a significant impact on the recycling process, and their behavioral preferences are rarely considered in the pricing decision of the reverse recycling supply chain. Based on the dual-channel RSC, this paper considers the competition among channels. It introduces the loss aversion behavior preference of consumers to establish a dual-channel RSC composed of remanufacturers and online and offline recyclers. This study aims to analyze the impact of consumers\' loss aversion behavior on the recycling pricing and profit of each node in the green RSC and discuss the decision of recyclers under consumers\' loss aversion behavior. The results show that the deeper consumers\' aversion to the loss of recycling price, the lower the recycling price of dual-channel recyclers will be, which will be more conducive to the increase in the profit of online recyclers. However, the profit of remanufacturers will be reduced, and the total amount of recycling will decline. This paper considers the impact of consumer loss aversion behavior on dual-channel reverse supply chain pricing decisions based on prospect theory. It provides references for chain members to set recycling prices to increase people\'s enthusiasm for recycling and the amount of recycled scrap, contributes to the cause of resource conservation and environmental protection, and improves the economic efficiency of recycling enterprises.

With the acceleration of the digitization process and the popularization of the internet, the recycling of waste from electrical and electronic equipment (WEEE) has become a potential and emerging recycling method. Stakeholders in the WEEE internet recycling industry have different roles which need to be clarified. The stakeholder structure and relationships, and stakeholder characteristics, lie at the core of recycling system governance. Therefore, it is necessary to identify stakeholders in the existing WEEE Internet recycling industry. This study selected 10 important stakeholders and classified them into key, potential, and marginal stakeholders using the Mitchell scale while analyzing their characteristics and interactions. The results showed that internet recycling companies, government, residents, and traditional recyclers are key stakeholders that are important for promoting the development of the industry. Based on the above analysis, policy advice is proposed to provide directions for the improvement of the WEEE industry.

OBJECTIVE: water is an imperfect agent for lens cleansing during endoscopy due to its incompetence to clean hydrophobic dirt, whereas amphiphilic surfactants have the potential to overcome the limitation of water. The trial was aimed to evaluate the cleansing effectiveness of 2 typical surfactants (simethicone solution and oolong tea) for colonoscopic lens.
METHODS: Oolong tea (O-), low concentration simethicone solution (S1-), high concentration simethicone solution (S2-) and distilled water (D-) were used as washing solutions for colonoscopic lens. Study I: The tip of the colonoscope was immersed in lard oil in order to simulate the blur, and photographs were taken toward a standard colonoscopy image in-vitro pre- and post- each cleansing procedure. The blurred areas of each image were quantified and compared. Study II: 395 consecutive patients who were due to colonoscopy examination were enrolled and randomized into O-, S2-, D-group. The volume of washing solution used and cleansing level during the examination procedure, adenoma and polyp detected per colonoscopy, insertion time and withdraw time were analyzed.
RESULTS: Study I: There were no differences in 4 groups for the blurred areas on images before lens cleansing. The blurred areas after lens cleansing were significantly smaller in 3 groups (O- 8.47 ± 20.91 vs S1- 13.06 ± 10.71 vs S2- 6.76 ± 8.49 vs D- 38.24 ± 29.69, P < .05) than water. The decline range of blurred areas after lens cleansing in oolong tea, low concentration simethicone solution, high concentration simethicone solution groups were significantly higher than that in distilled water group (O- 87.35 ± 20.81 vs S1- 78.12 ± 19.24 vs S2- 89.57 ± 8.50 vs D- 53.39 ± 28.45, P < .05). Study II: The volume of washing solution used in S2-group was significantly smaller than that in O-group and D-group. The cleansing level of the colonoscopic lens of O-group was significantly superior than that of S2-group and D-group.
CONCLUSIONS: The in-vitro test showed oolong tea and simethicone solution can effectively cleans the colonoscopic lens. The clinical trial demonstrated that oolong tea instead of water is effective to provide better visualization during colonoscopy.Registration: Chictr.org.cn No: ChiCTR1900025606.

Personal protective equipment (PPE) is crucially important to the safety of both patients and medical personnel, particularly in the event of an infectious pandemic. As the incidence of Coronavirus Disease 2019 (COVID-19) increases exponentially in the United States and many parts of the world, healthcare provider demand for these necessities is currently outpacing supply. In the midst of the current pandemic, there has been a concerted effort to identify viable ways to conserve PPE, including decontamination after use. In this study, we outline a procedure by which PPE may be decontaminated using ultraviolet (UV) radiation in biosafety cabinets (BSCs), a common element of many academic, public health, and hospital laboratories. According to the literature, effective decontamination of N95 respirator masks or surgical masks requires UV-C doses of greater than 1 Jcm-2, which was achieved after 4.3 hours per side when placing the N95 at the bottom of the BSCs tested in this study. We then demonstrated complete inactivation of the human coronavirus NL63 on N95 mask material after 15 minutes of UV-C exposure at 61 cm (232 μWcm-2). Our results provide support to healthcare organizations looking for methods to extend their reserves of PPE.

Due to over-consumption of fossil resources and environmental problems, lignocellulosic biomass as the most abundant and renewable materials is considered as the best candidate to produce biomaterials, biochemicals, and bioenergy, which is of strategic significance and meets the theme of Green Chemistry. Highly efficient and green fractionation of lignocellulose components significantly boosts the high-value utilization of lignocellulose and the biorefinery development. However, heterogeneity of lignocellulosic structure severely limited the lignocellulose fractionation. This paper offers the summary and perspective of the extensive investigation that aims to give insight into the lignocellulose prior-fractionation. Based on the role and structure of lignocellulose component in the plant cell wall, lignocellulose prior-fractionation can be divided into cellulose-first strategy, hemicelluloses-first strategy, and lignin-first strategy, which realizes the selective dissociation and transformation of a component in lignocellulose. Ultimately, the challenges and opportunities of lignocellulose prior-fractionation are proposed on account of the existing problems in the biorefining valorization.