OBJECTIVE: To compare the clinical efficacy and safety of single-use and reusable digital flexible ureteroscopy for the treatment of lower pole stones.
METHODS: We enrolled 135 patients underwent reusable flexible ureteroscopy (FURS) and 78 patients underwent single-use digital FURS. Demographic, clinical variables, anatomical parameters of the lower calyx and perioperative indicators were compared in the two groups.
RESULTS: Thirty-six patients in the infundibuloureter angle (IPA) < 45° subgroup had a mini-percutaneous nephrolithotomy (mini-PCNL), including 25 patients in the reusable FURS group and 11 patients in the single-use FURS group. The demographic and clinical variables in the two FURS groups were comparable. There was no statistical difference in the success rate of stone searching (P > 0.05). In terms of the success rate of lithotripsy, there was also no statistical difference in the IPA ≥ 45° subgroup (P > 0.05), whereas single-use FURS was superior in the IPA < 45° subgroup (χ2 = 6.513, P = 0.011). The length of the working fiber in the reusable FURS and single-use FURS groups was 3.20 ± 0.68 mm and 1.75 ± 0.47 mm, respectively (t = 18.297, P < 0.05). The use of a stone basket in the reusable FURS (31/135, 23.0%) was significantly higher than that in the single-use FURS (8/78, 10.3%) (χ2 = 5.336, P = 0.021). Compared with the reusable FURS group, the single-use FURS group had shorter operation times (P < 0.05) and higher stone-free rate (SFR) (χ2 = 4.230, P = 0.040). There was no statistical difference in the intraoperative transfer of mini-PCNL and postoperative complications between the two groups (P > 0.05).
CONCLUSIONS: Single-use and reusable FURS are alternative methods for removal of lower pole stones (i.e., 2 cm or less). Single-use FURS has a high success rate of lithotripsy, shorter operation time, and high stone-free rate.

OBJECTIVE: to analyze the integrity of N95/PFF2 masks in relation to fiber morphology, porosity, cracks and micro holes, as well as identify visible damage to their structure and components, after seven- and fifteen-day reuse protocols.
METHODS: cross-sectional study. Structural and morphological characteristics of a new N95/PFF2 mask were analyzed in comparison with N95/PFF2 masks (n=10) used in seven- and fifteen-day protocols, through visual inspection and scanning electron microscopy.
RESULTS: upon visual inspection, following the seven-day protocol, 40% and 60% of the N95/PFF2 masks showed, respectively, personal identification marks and external and internal dirt. Additionally, 20% exhibited loosening and/or tearing of the straps, while 100% showed some type of damage to the nose clips. In the fifteen-day protocol, all N95/PFF2 masks had dirt, loose straps and damaged nose clips, and 80% had folds. Electronic microscopy revealed an increase in pores and loosening in the weaves from seven days onwards, extending up to fifteen days, with the presence of micro holes and residues.
CONCLUSIONS: the reuse of N95/PFF2 masks affects their structural and morphological integrity. It is crucial to carry out tests to measure the impact of this practice on the safety of health professionals.

UNASSIGNED: Ultrasound diagnosis and treatment is easy to perform and takes little time. It is widely used in clinical practice thanks to its non-invasive, real-time, and dynamic characteristics. In the process of ultrasound diagnosis and treatment, the probe may come into contact with the skin, the mucous membranes, and even the sterile parts of the body. However, it is difficult to achieve effective real-time disinfection of the probes after use and the probes are often reused, leading to the possibility of the probes carrying multiple pathogenic bacteria. At present, the processing methods for probes at home and abroad mainly include probe cleaning, probe disinfection, and physical isolation (using probe covers or sheaths). Yet, each approach has its limitations and cannot completely prevent probe contamination and infections caused by ultrasound diagnosis and treatment. For example, when condoms are used as the probe sheath, the rate of condom breakage is relatively high. The cutting and fixing of cling film or freezer bags involves complicated procedures and is difficult to perform. Disposable plastic gloves are prone to falling off and causing contamination and are hence not in compliance with the principles of sterility. Furthermore, the imaging effect of disposable plastic gloves is poor. Therefore, there is an urgent need to explore new materials to make probe covers that can not only wrap tightly around the ultrasound probe, but also help achieve effective protection and rapid reuse. Based on the concept of physical barriers, we developed in this study a heat sealing system for the rapid reuse of ultrasound probes. The system uses a heat sealing device to shrink the protective film so that it wraps tightly against the surface of the ultrasound probe, allowing for the rapid reuse of the probe while reducing the risk of nosocomial infections. The purpose of this study is to design a heat sealing system for the rapid reuse of ultrasound probes and to verify its application effect on the rapid reuse of ultrasound probes.
UNASSIGNED: 1) The heat sealing system for the rapid reuse of ultrasound probes was designed and tested by integrating medical and engineering methods. The system included a protective film (a multilayer co-extruded polyolefin thermal shrinkable film) and a heat sealing device, which included heating wire components, a blower, a photoelectric switch, temperature sensors, a control and drive circuit board, etc. According to the principle of thermal shrinkage, the ultrasound probe equipped with thermal shrinkable film was rapidly heated and the film would wrap closely around the ultrasound probe placed on the top of the heat sealing machine. The ultrasound probe was ready for use after the thermal shrinkage process finished. Temperature sensors were installed on the surface of the probe to test the thermal insulation performance of the system. The operation procedures of the system are as follows: placing the ultrasound probe covered with the protective film in a certain space above the protective air vent, which is detected by the photoelectric switch; the heating device heats the thermal shrinkable film with a constant flow of hot air at a set temperature value. Then, the probe is rotated so that the thermal shrinkable film will quickly wrap around the ultrasound probe. After the heat shrinking is completed, the probe can be used directly. 2) Using the convenience sampling method, 90 patients from the Department of Anesthesiology and Perioperative Medicine, the First Affiliated Hospital of Xi\'an Jiaotong University were included as the research subjects. All patients were going to undergo arterial puncture under ultrasound guidance. The subjects were divided into 3 groups, with 30 patients in each group. Three measures commonly applied in clinical practice were used to process the probes in the three groups and water-soluble fluorescent labeling was applied around the puncture site before use. In the experimental group, the probes were processed with the heat sealing system. The standard operating procedures of the heat sealing system for rapid reuse of ultrasonic probes were performed to cover the ultrasonic probe and form a physical barrier to prevent probe contamination. There were two control groups. In control group 1, disinfection wipes containing double-chain quaternary ammonium salt were used to repeatedly wipe the surface of the probe for 10-15 times, and then the probe was ready for use once it dried up. In the control group 2, a disposable protective sheath was used to cover the front end of the probe and the handle end of the sheath was tied up with threads. Comparison of the water-soluble fluorescent labeling on the surface of the probe (which reflected the colony residues on the surface of the probe) before and after use and the reuse time (i.e., the lapse of time from the end of the first use to the beginning of the second use) were made between the experimental group and the two control groups.
UNASSIGNED: 1) The temperature inside the ultrasound probe was below 40 ℃ and the heat sealing system for rapid reuse did not affect the performance of the ultrasound probe. 2) The reuse time in the heat sealing system group, as represented by (median [P25, P75]), was (8.00 [7.00, 10.00]) s, which was significantly lower than those of the disinfection wipe group at (95.50 [8.00, 214.00]) s and the protective sleeve group at (25.00 [8.00, 51.00]) s, with the differences being statistically significant (P<0.05). No fluorescence residue was found on the probe in either the heat sealing system group or the protective sheath group after use. The fluorescence residue in the heat sealing system group was significantly lower than that in the disinfection wipes group, showing statistically significant differences (χ 2=45.882, P<0.05).
UNASSIGNED: The thermal shrinkable film designed and developed in this study can be cut and trimmed according to the size of the equipment. When the film is heated, it shrinks and wraps tightly around the equipment, forming a sturdy protective layer. With the heat sealing system for rapid reuse of ultrasonic probes, we have realized the semi-automatic connection between the thermal shrinkable film and the heating device, reducing the amount of time-consuming and complicated manual operation. Furthermore, the average reuse time is shortened and the system is easy to use, which contributes to improvements in the reuse and operation efficiency of ultrasound probes. The heat sealing system reduces colony residues on the surface of the probe and forms an effective physical barrier on the probe. No probes were damaged in the study. The heat sealing system for rapid reuse of ultrasonic probes can be used as a new method to process the ultrasonic probes.

Sterile Processing Departments (SPDs) must clean, maintain, store, and organize surgical instruments which are then delivered to Operating Rooms (ORs) using a Courier Network, with regular coordination occurring across departmental boundaries. To represent these relationships, we utilized the Systems Engineering Initiative for Patient Safety (SEIPS) 101 Toolkit, which helps model how health-related outcomes are affected by healthcare work systems. Through observations and interviews which built on prior work system analyses, we developed a SEIPS 101 journey map, PETT scan, and tasks matrices to represent the instrument reprocessing work system, revealing complex interdependencies between the people, tools, and tasks occurring within it. The SPD, OR and Courier teams are found to have overlapping responsibilities and a clear co-dependence, with critical implications for the successful functioning of the whole hospital system.

BACKGROUND: Personal syringe reuse (i.e., reuse of one\'s own syringes) can place people who inject drugs at increased risk for infectious disease but has received relatively little attention in published literature. The purpose of this study is to identify factors associated with syringe reuse among people who inject drugs in rural Kentucky.
METHODS: Participants (n = 238) completed interviewer-administered questionnaires on syringe reuse and demographic, behavioral, and service access characteristics. Unadjusted negative binomial regression with cluster-robust standard errors was used to model the associations with a logged offset for number of injections in the past 30 days.
RESULTS: The average age of the sample was 35 and 59.7 % were male. Most participants (77.7 %) reused syringes at least once in the past 30 days, using each syringe a median of three times. Reuse was higher among those who were older and reported a higher street price for syringes. Syringe reuse was lower among people who were within walking distance to a syringe service program (SSP) and who obtained most of their syringes from SSPs or pharmacies.
CONCLUSIONS: Syringe reuse among people who inject drugs in rural Kentucky is common. However, these data suggest that increased access to syringes from SSPs and pharmacies, as well as policy-level interventions that reduce street syringe price, might reduce syringe reuse and related harms.

UNASSIGNED: Reusable elastomeric half-mask respirators (EHMR) are an alternative to address shortages of disposable respirators. While respirator discomfort has been noted as a barrier to adherence to wearing an N95 filtering facepiece respirator (FFR) among health care personnel (HCP), few have examined EHMR comfort while providing patient care, which was the purpose of this study.
UNASSIGNED: Among a cohort of 183 HCP, we prospectively examined how HCP rated EHMR tolerability using the Respirator Comfort, Wearing Experience, and Function Instrument (R-COMFI) questionnaire at Study Week 2 and Week 10. At the completion of the study (Week-12), HCP compared EHMR comfort with their prior N95 FFR use. Overall R-COMFI scores and three subscales (comfort, wear experience, and function) were examined as well as individual item scores.
UNASSIGNED: The HCP reported an improved overall R-COMFI score (lower score more favorable, 30.0 vs. 28.7/47, respectively) from Week 2 to Week 10. Many individual item scores improved or remained low over this period, except difficulty communicating with patients and coworkers. The overall R-COMFI scores for the EHMR were more favorable than for the N95 FFR (33.7 vs. 37.4, respectively), with a large proportion of workers indicating their perception that EHMR fit better, provided better protection, and they preferred to wear it in pandemic conditions compared with the N95 FFR.
UNASSIGNED: Findings suggest that the EHMR is a feasible respiratory protection device with respect to tolerance. EHMRs can be considered as a possible alternative to the N95 FFR in the health care setting. Future work is needed in the EHMR design to improve communication.

We present a new model formulation for a multiproduct dynamic order quantity problem with product returns and a reprocessing option. The optimization considers the limited shelf life of sterile medical devices as well as the capacity constraints of reprocessing and sterilization resources. The time-varying demand is known in advance and must be satisfied by purchasing new medical devices or by reprocessing used and expired devices. The objective is to determine a feasible procurement and reprocessing plan that minimizes the incurred costs. The problem is solved in a heuristic manner in two steps. First, we use a Dantzig-Wolfe reformulation of the underlying problem, and a column generation approach is applied to tighten the lower bound. In the next step, the obtained lower bound is transformed into a feasible solution using CPLEX. Our numerical results illustrate the high solution quality of this approach. The comparison with a simulation based on the first-come-first-served principle shows the advantage of integrated planning.

An increase in reusable Elastomeric Half Mask Respirators (EHMRs) among healthcare personnel has been documented during pandemic emergencies; however, research has not detailed leadership practices to support their use. Forty-three organizations implemented EHMRs received from the United States federal government which prompted interviews with 73 individuals who managed respirator distribution and fit testing between October 2021 and November 2022. Interview data was qualitatively analyzed. Themes around organizational culture and leadership practices emerged when discussing how elastomeric half mask respirators were integrated into health delivery settings including communication and outreach methods to aid worker support. Example included on-line and hands-on training, peer support, leadership support, and a culture that supports respirator use. To support a shift to reusable respiratory protection being procured and implemented, organizational- and individual-level perspectives are needed. Employee engagement, respirator champions, and updated verbal and written communication mechanisms are important takeaways for leaders to consider during any routine or emergency scenario.

BACKGROUND: Operating room (OR) expenditures and waste generation are a priority, with several professional societies recommending the use of reprocessed or reusable equipment where feasible. The aim of this analysis was to compare single-use pulse oximetry sensor stickers (\"single-use stickers\") versus reusable pulse oximetry sensor clips (\"reusable clips\") in terms of annual cost savings and waste generation across all ORs nationally.
METHODS: This study did not involve patient data or research on human subjects. As such, it did not meet the requirements for institutional review board approval. An economic model was used to compare the relative costs and waste generation from using single-use stickers versus reusable clips. This model took into account: (1) the relative prices of single-use stickers and reusable clips, (2) the number of surgeries and ORs nationwide, (3) the workload burden of cleaning the reusable clips, and (4) the costs of capital for single-use stickers and reusable clips. In addition, we also estimated differences in waste production based on the raw weight plus unit packaging of single-use stickers and reusable clips that would be disposed of over the course of the year, without any recycling interventions. Estimated savings were rounded to the nearest $0.1 million.
RESULTS: The national net annual savings of transitioning from single-use stickers to reusable clips in all ORs ranged from $510.5 million (conservative state) to $519.3 million (favorable state). Variability in savings estimates is driven by scenario planning for replacement rate of reusable clips, workload burden of cleaning (ranging from an additional expense of $618k versus a cost savings of $309k), and cost of capital-interest gained on investment of capital that is freed up by the monetary savings of a transition to reusable clips contributes between $541k (low-interest rates of 2.85%) and $1.3 million (high-interest rates of 7.08%). The annual waste that could be diverted from landfill by transitioning to reusable clips was found to be between 587 tons (conservative state) up to 589 tons (favorable state). If institutions need to purchase new vendor monitors or cables to make the transition, that may increase the 1-time capital disbursement.
CONCLUSIONS: Using reusable clips versus single-use stickers across all ORs nationally would result in appreciable annual cost savings and waste generation reduction impact. As both single-use stickers and reusable clips are equally accurate and reliable, this cost and waste savings could be instituted without a compromise in clinical care.

The identification of worst-case device (or device set) features has been a well-established validation approach in many areas (e.g., terminal sterilization) for determining process effectiveness and requirements, including for reusable medical devices. A device feature approach for cleaning validations has many advantages, representing a more conservative approach compared with the alternative compendial method of testing the entirety of the device. By focusing on the device feature(s), the most challenging validation variables can be isolated to and studied at the most difficult-to-clean feature(s). The device feature approach can be used to develop a design feature database that can be used to design and validate device cleanliness. It can also be used to commensurately develop a quantitative cleaning classification system that will augment and innovate the effectiveness of the Spaulding classification for microbial risk reduction. The current study investigated this validation approach to verify the efficacy of device cleaning procedures and mitigate patient risk. This feature categorization approach will help to close the existing patient safety gap at the important interface between device manufacturers and healthcare facilities for the effective and reliable processing of reusable medical devices. A total of 56,000 flushes of the device features were conducted, highlighting the rigor associated with the validation. Generating information from design features as a critical control point for cleaning and microbiological quality will inform future digital transformation of the medical device industry and healthcare delivery, including automation.