Nanoparticle surfactants assembled at water-oil interfaces can significantly lower the interfacial tension and can be used to stabilize liquids. Understanding and actively tuning the mechanical properties of the generated membranes, which comprise the nanoparticle surfactants, are of significant fundamental interest for the interfacial behavior of nanoparticles and of interest for water purification, drug encapsulation, enhanced oil recovery, and innovative energy transduction applications. Here, we present electrostatic interaction-driven fabrication of freestanding and close-packed SiO2 surfactant membranes with diameters up to 0.10 mm. The membranes of 20-30 nm in thickness were spanned over holes with a diameter of 2 μm, exhibiting a Young\'s modulus ranging from 1.5 to 5.9 GPa. The controllable elastic properties of the fabricated nanoparticle surfactant membranes are found to be dictated by the strength of interactions between nanoparticles and ligands, between ligands and ligands, and between the nanoparticle surfactants. The results present an efficient approach for fabricating and developing nanoparticle surfactant-based large-area, freestanding, and ultrathin membranes with finely tunable mechanical properties on a large scale.

Research on the recovery of rare earth elements from wastewater has attracted increasing attention. Compared with other methods, biosorption is a simple, efficient, and environmentally friendly method for rare earth wastewater treatment, which has greater prospects for development. The objective of this study was to investigate the biosorption behavior and mechanism of Yarrowia lipolytica for five rare earth ions (La3⁺, Nd3⁺, Er3⁺, Y3⁺, and Sm3⁺) with a particular focus on biosorption behavior, biosorption kinetics, and biosorption isotherm. It was demonstrated that the biosorption capacity of Y. lipolytica at optimal conditions was 76.80 mg/g. It was discovered that the biosorption process complied with the pseudo-second-order kinetic model and the Langmuir biosorption isotherm, indicating that Y. lipolytica employed a monolayer chemical biosorption process to biosorb rare earth ions. Characterization analysis demonstrated that the primary functional groups involved in rare earth ion biosorption were amino, carboxyl, and hydroxyl groups. The cooperative biosorption of rare earth ions by Y. lipolytica was facilitated by means of surface complexation, ion exchange, and electrostatic interactions. These findings suggest that Y. lipolytica has the potential to be an effective biosorbent for the removal of rare earth elements from wastewater.

Arrays of nanoparticle (NP) clusters with controlled architectures show broad applications in nanolasers, sensors, and photocatalysis, but the fabrication of these arrays on substrates remains a grand challenge. This review presents a highly effective polymer-based strategy for the process-directed self-assembly of binary polyelectrolyte-grafted NPs (PGNPs) bearing opposite charges into stable colloidal molecules (CMs) on substrates via electrostatic interactions. The coordination number (x) of ABx CMs can be tuned by adjusting the pH or ionic strength of the solution or by employing different combinations of PGNPs with varying charge densities. Large-area CMs with diverse structures ranging from AB to AB7 can be constructed on substrates in high yields. This approach is applicable to PGNPs with different cores of NPs. This assembly strategy offers a useful tool for the fabrication of structurally precise assemblies on substrates with broad applications.

In this study, a new polyionic polymer inhibitor, TIL-NH2, was developed to address the instability of shale gas horizontal wells caused by water-based drilling fluids. The structural characteristics and inhibition effects of TIL-NH2 on mud shale were comprehensively analyzed using infrared spectroscopy, NMR spectroscopy, contact angle measurements, particle size distribution, zeta potential, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The results demonstrated that TIL-NH2 significantly enhances the thermal stability of shale, with a decomposition temperature exceeding 300 °C, indicating excellent high-temperature resistance. At a concentration of 0.9%, TIL-NH2 increased the median particle size of shale powder from 5.2871 μm to over 320 μm, effectively inhibiting hydration expansion and dispersion. The zeta potential measurements showed a reduction in the absolute value of illite\'s zeta potential from -38.2 mV to 22.1 mV at 0.6% concentration, highlighting a significant decrease in surface charge density. Infrared spectroscopy and X-ray diffraction confirmed the formation of a close adsorption layer between TIL-NH2 and the illite surface through electrostatic and hydrogen bonding, which reduced the weakly bound water content to 0.0951% and maintained layer spacing of 1.032 nm and 1.354 nm in dry and wet states, respectively. Thermogravimetric analysis indicated a marked reduction in heat loss, particularly in the strongly bound water content. Scanning electron microscopy revealed that shale powder treated with TIL-NH2 exhibited an irregular bulk shape with strong inter-particle bonding and low hydration degree. These findings suggest that TIL-NH2 effectively inhibits hydration swelling and dispersion of shale through the synergistic effects of cationic imidazole rings and primary amine groups, offering excellent temperature and salt resistance. This provides a technical foundation for the low-cost and efficient extraction of shale gas in horizontal wells.

Label-free surface-enhanced Raman spectroscopy (SERS) has attracted extensive attention as an emerging technique for molecular phenotyping of biological samples. However, the selective enhancement property of SERS mediated by complicated interactions between substrates and analytes is unfavorable for molecular profiling. The electrostatic force is among the most dominating interactions that can cause selective adsorption of molecules to charged substrates. This means if only negatively- or positively-charged SERS substrates are applied, then considerable SERS information from a portion of analytes would be lost, hindering comprehensive SERS sensing. In this work, we utilize both negatively- and positively-charged colloidal silver (Ag) nanoparticles (NPs) to detect various charged molecules. The negatively-charged citrate-stabilized Ag and the positively-charged Ag prepared via a cetyltrimethyl-ammonium chloride-based charge reversal protocol have been adopted as SERS substrates. The Ag NPs are all relatively well-dispersed with good uniformity. After applying the oppositely-charged NPs to the detection of charged molecules, we find the SERS results explicitly demonstrate the electrostatically-driven SERS selective enhancement, which is further supported and clarified by molecular electrostatic potential calculations. Our work highlights the importance of developing SERS substrates modified with appropriate surface charges for various analytes, and enlightens us that potentially more molecular SERS information can be acquired from complex bio-samples using combinations of oppositely-charged substrates.

The aqueous zinc ion battery emerges as the promising candidate applied in large-scale energy storage system. However, Zn anode suffers from the issues including Zn dendrite, Hydrogen evolution reaction and corrosion. These challenges are primarily derived from the instability of anode/electrolyte interface, which is associated with the interfacial charge density distribution. In this context, the recent advancements concentrating on the strategies and mechanism to regulate charge density at the Zn anode/electrolyte interface are summarized. Different characterization techniques for charge density distribution have been analysed, which can be applied to assess the interfacial zinc ion transport. Additionally, the charge density regulations at the Zn anode/electrolyte interface are discussed, elucidating their roles in modulating electrostatic interactions, electric field, structure of solvated zinc ion and electric double layer, respectively. Finally, the perspectives and challenges on the further research are provided to establish the stable anode/electrolyte interface by focusing on charge density modifications, which is expected to facilitate the development of aqueous zinc ion battery.

Biogenic, sustainable two-dimensional architectures, such as films and nanopapers, have garnered considerable interest because of their low carbon footprint, biodegradability, advanced optical/mechanical characteristics, and diverse potential applications. Here, bio-based nanopapers with tailored characteristics were engineered by the electrostatic complexation of oppositely charged colloidal phosphorylated cellulose nanofibers (P-CNFs) and deacetylated chitin nanocrystals (ChNCs). The electrostatic interaction between anionic P-CNFs and cationic ChNCs enhanced the stretchability and water stability of the nanopapers. Correspondingly, they exhibited a wet tensile strength of 17.7 MPa after 24 h of water immersion. Furthermore, the nanopapers exhibited good thermal stability and excellent self-extinguishing behavior, triggered by both phosphorous and nitrogen. These features make the nanopapers sustainable and promising structures for application in advanced fields, such as optoelectronics.

Understanding the intricate interactions governing protein and peptide behavior in liquid-liquid phase separation (LLPS) is crucial for unraveling biological functions and dysfunctions. This study employs a residue-leveled coarse-grained molecular dynamics approach to simulate the phase separation of repetitive polyproline and polyarginine peptides (poly PR) with varying lengths and sequences in solution, considering different concentrations and temperatures. Our findings highlight the crucial role of sequence order in promoting LLPS in peptides with identical lengths of repetitive sequences. Interestingly, repetitive peptides containing fewer than 10 polyarginine repeats exhibit no LLPS, even at salt concentrations up to 3 M. Notably, our simulations align with experimental observations, pinpointing a salt concentration of 2.7 M for PR25-induced LLPS. Utilizing the same methodology, we predict the required salt concentrations for LLPS induction as 1.2 M, 1.5 M, and 2.7 M for PR12, PR15, and PR35, respectively. These predictions demonstrate good agreement with experimental results. Extending our investigation to include the peptide glutamine and arginine (GR15) in DNA solution, our simulations mirror experimental observations of phase separation. To unveil the molecular forces steering peptide phase separation, we introduce a dielectric constant modifier and hydrophobicity disruptor into poly PR systems. Our coarse-grained analysis includes an examination of temperature effects, leading to the inference that both hydrophobic and electrostatic interactions drive phase separation in peptide systems.

This study examined the distinct effects of algae polysaccharides (AP), namely sodium alginate (SA), fucoidan (FU), and laminarin (LA), on the aggregation of nanoplastics (NP) in seawater, as well as their subsequent transport in seawater-saturated sea sand. The pristine 50 nm NP tended to form large aggregates, with an average size of approximately 934.5 ± 11 nm. Recovery of NP from the effluent (Meff) was low, at only 18.2 %, and a ripening effect was observed in the breakthrough curve (BTC). Upon the addition of SA, which contains carboxyl groups, the zeta (ζ)-potential of the NP increased by 2.8 mV. This modest enhancement of electrostatic interaction with NP colloids led to a reduction in the aggregation size of NP to 598.0 ± 27 nm and effectively mitigated the ripening effect observed in the BTC. Furthermore, SA\'s adherence to the sand surface and the resulting increase in electrostatic repulsion, caused a rise in Meff to 27.5 %. In contrast, the introduction of FU, which contains sulfate ester groups, resulted in a surge in ζ-potential of the NP to -27.7 ± 0.76 mV. The intensified electrostatic repulsion between NP and between NP and sand greatly increased Meff to 45.6 %. Unlike the effects of SA and FU, the addition of LA, a neutral compound, caused a near disappearance of ζ-potential of NP (-3.25 ± 0.68 mV). This change enhanced the steric hindrance effect, resulting in complete stabilization of particles and a blocking effect in the BTC of NP. Quantum chemical simulations supported the significant changes in the electrostatic potential of NP colloids induced by SA, FU and LA. In summary, the presence of AP can induce variability in the mobility of NP in seawater-saturated porous media, depending on the nature of the weak, strong, or non-electrostatic interactions between colloids, which are influenced by the structure and functionalization of the polysaccharides themselves. These findings provide valuable insights into the complex and variable behavior of NP transport in the marine environment.

Sodium p-perfluorous nonenoxybenzene sulfonate (OBS) is one of the key alternatives to perfluoroalkyl substances (PFASs). Its widespread tendency has increased extensive contamination in the aquatic environment. However, the present treatment technology for OBS exhibited insignificant adsorption capacity and long adsorption time. In this study, three proportions (1:5, 3:5, and 10:1) of chitosan-modified amino-driven graphene oxide (CS-GO) were innovated to strengthen the OBS adsorption capacity, compared with graphene oxide (GO) and graphene (GH). Through the characterization of SEM, BET, and FTIR, it was discovered that CS was synthetized on GO surfaces successfully with a low specific surface area. Subsequently, batch single influence factor studies on OBS removal from simulated wastewater were investigated. The optimum removal efficiency of OBS could be achieved up to 95.4% within 2 h when the adsorbent was selected as CS-GO (10:1), the dosage was 2 mg, and the pH was 3. The addition of inorganic ions could promote the adsorption efficiency of OBS. In addition, CS-GO presented the maximum adsorption energy due to additional functional groups of -NH3, and electrostatic interaction was the foremost motive for improving the adsorption efficiency of OBS. Moreover, OBS exhibited the fastest diffusion coefficient in the CS-GO-OBS solution, which is consistent with the fitting results of adsorption kinetics.