It is a well-known saying that the eyes are \"windows to the soul.\" The absence or loss of any facial part, particularly the vision, can lead to severe physical as well as emotional trauma. Losing any part of the face causes the patient societal, physical, and psychological anguish. An ocular prosthesis aims to improve social acceptance and boost self-confidence by restoring the facial appearance. A pediatric dental specialist should be a part of the maxillofacial prosthesis team since maxillofacial prosthetic rehabilitation in young children can be challenging, especially with the less cooperative ones. The following case report describes these challenges in relation to a 5-year-old boy who had his eye enucleated due to trauma. The purpose of the case was to provide custom-built, acrylic ocular prostheses in as comfortable and atraumatic manner as possible by the maxillofacial prosthetic team.
UNASSIGNED: Bansod AV, Pisulkar S, Beri A, et al. Rehabilitation of an Ocular Defect Using a Custom Ocular Prosthesis in a Pediatric Patient. Int J Clin Pediatr Dent 2024;17(4):479-482.

The interface between material science and ophthalmic medicine is witnessing significant advances with the introduction of biopolymers in medical device fabrication. This review discusses the impact of biopolymers on the development of ophthalmic devices, such as intraocular lenses, stents, and various prosthetics. Biopolymers are emerging as superior alternatives due to their biocompatibility, mechanical robustness, and biodegradability, presenting an advance over traditional materials with respect to patient comfort and environmental considerations. We explore the spectrum of biopolymers used in ophthalmic devices and evaluate their physical properties, compatibility with biological tissues, and clinical performances. Specific applications in oculoplastic and orbital surgeries, hydrogel applications in ocular therapeutics, and polymeric drug delivery systems for a range of ophthalmic conditions were reviewed. We also anticipate future directions and identify challenges in the field, advocating for a collaborative approach between material science and ophthalmic practice to foster innovative, patient-focused treatments. This synthesis aims to reinforce the potential of biopolymers to improve ophthalmic device technology and enhance clinical outcomes.

OBJECTIVE: Artificial eye users (AEUs) can experience a negative impact on psychological and emotional wellbeing, including reduced social functioning, which may be a consequence of living with one eye removed, and/or of having a prosthetic eye. This may have wider consequences for their families. We aimed to explore what it means to live with a prosthetic eye, for both AEUs and their families-and how any quality of life (QoL) issues impact on their day-to-day functioning.
METHODS: A subset of AEUs and their family members taking part in a feasibility randomised controlled trial comparing hand-painted to digitally printed artificial eyes were invited for semi-structured interviews. Transcripts were analysed using reflexive thematic analysis. Qualitative results related to trial participation are covered elsewhere. Here, we focus on QoL and day-to-day functioning.
RESULTS: Twelve AEUs (eight males) and five spouses (one male) who had worn artificial eyes for 2-65 years took part, and four themes were identified. (1) Impact on day-to-day life: AEUs and their spouses have to adapt to (partial) sight loss, reduced levels of confidence, and social withdrawal. (2) Impact on psychological and emotional wellbeing: distress among AEUs and their spouses can be severe and prolonged, highlight unmet support needs. (3) Challenges with treatment experiences: AEUs experienced negative impact of fragmentation of care and long waiting times. (4) Worries about the future: AEUs mentioned fragility of remaining sight, and concerns around potential need for further treatment.
CONCLUSIONS: Patients and their family members experience negative impact of being an AEU on their everyday lives and quality of life. There is a potential role for psychosocial support services in supporting AEUs and their families even long after eye loss.

This study aims to assess the influence of using 3D-printed acrylic resin versus conventional Poly-methyl methacrylate (PMMA) for fabricating ocular prostheses on the biofilm and microbial flora of anophthalmic socket.
A randomized controlled trial was designed as a parallel group study. Participants were allocated randomly into two groups: the control group, which received conventionally fabricated ocular prostheses (CG, n = 11), and the test group, which received digitally 3D-printed ocular prostheses (DG, n = 11). Microbiological analysis was conducted before prosthesis insertion and three months after using the ocular prosthesis. Swab samples were inoculated on blood agar, MacConkey\'s agar, and Sabouraud\'s dextrose agar (SDA) for isolating Gram-positive, Gram-negative, and fungal organisms, respectively. Subsequently, the plates were incubated at 37 degrees Celsius for 48 h. Additionally, a validated questionnaire was used for subjective clinical evaluation, including parameters such as comfort level, socket discharge, lacrimation, and frequency of lubrication for each ocular prosthesis patient in both groups.
Test group (DG, n = 11) exhibited a positive, though statistically insignificant, difference (p > 0.001) in microbial growth when compared to the control group (CG, n = 11). A statistically significant difference was observed in comfort levels between the two groups, with more comfort level within group II (test group) patients. While parameters such as discharge amount, discharge location, lacrimation and lubrication frequency displayed statistically insignificant differences between the two groups, all parameters showed improved results after three months of prosthesis use.
The choice of ocular prosthesis fabrication technique did not yield a statistically significant difference in anophthalmic flora. However, the 3D-printed acrylic resin, as an artificial eye material, displayed potential advantages in reducing the colonization of opportunistic pathogens. All subjective clinical evaluation parameters exhibited enhanced outcomes after three months of prosthesis use, emphasizing the need for an adaptation period during which patients complains are alleviated. In comparison with PMMA, 3D-printed acrylic resin showcased a certain degree of anti-colonization ability against pathogenic bacteria, along with a significant level of patient comfort, suggesting its potential as a promising material for ocular prostheses.
This parallel double-blinded RCT has been registered at ClinicalTrials.gov with identification number: NCT05584865, 18/10/2022.

There are various techniques available for constructing a custom ocular prosthesis. The present technique report describes a digital workflow for constructing an ocular prosthesis using computed tomography integrated with digital technologies. The outer region of the healthy eyeball was segmented to produce the top surface of the prosthesis, while the contour and bottom surface were segmented from the tissue bed of the anophthalmic socket. The iris position was determined by tracing the optical nerve and confirmed by superimposing the patient\'s facial scan onto the soft tissue model of the computed tomography. Using these parameters, a standard tessellation language file for the ocular prosthesis was generated and 3D printed. The iris was then printed via UV technology using digital photographs of the patient\'s contralateral eye; characterization of the sclera and the final layer of clear acrylic resin were done conventionally.

UNASSIGNED: Ocular prosthesis rehabilitation has an important social, psychological, esthetic, and functional role. Congenital factors, trauma, and tumors, among others, can cause anophthalmia, and it is essential to identify the etiology to guide its prevention and treatment.
UNASSIGNED: The aim of this study was to retrospectively investigate the records of patients treated from 2013 to 2020 by the Oral and Maxillofacial Prosthesis Group, aiming to identify the prevalence of patients with anophthalmia and the etiology of their anophthalmia. After approval by the Human Research Ethics Committee, two calibrated researchers evaluated 520 records, identifying those from patients with anophthalmia. The inclusion criteria were records with complete and legible information from patients with anophthalmia and a description of their etiology. Descriptive statistics were performed, and etiological factors were categorized into trauma, congenital cause, end-stage eye disease, and tumor. Spearman\'s correlation was performed to verify the relation between gender and anophthalmia etiology, with a 5% significance level. Seventy-two records were included in the study.
UNASSIGNED: It was observed that 33.4% of patients were women and 66.6% were men. The etiologies were physical trauma (52.4%), tumor (21.8%), end-stage eye disease (16.6%), and congenital cause (9.2%), and there was no correlation between gender and these etiologies (p = .301).
UNASSIGNED: Most of the cases identified were of traumatic origin, which allows the establishment of preventive and educational measures to avoid new cases of anophthalmia.

BACKGROUND: Ligneous Conjunctivitis (LC) is the most common clinical manifestation of Type I Plasminogen deficiency (T1PD; OMIM# 217090), and it is characterized by the formation of pseudomembranes (due to deposition of fibrin) on the conjunctivae leading to progressive vision loss. In past times, patients with LC were treated with surgery, topical anti-inflammatory, cytostatic agents, and systemic immunosuppressive drugs with limited results (Blood 108:3021-3026, 2006, Ophthalmology 129:955-957, 2022, Surv Ophthalmol 48:369-388, 2003, Blood 131:1301-1310, 2018). The surgery can also trigger the development of membranes, as observed in patients needing ocular prosthesis (Surv Ophthalmol 48:369-388, 2003). Treatment with topical purified plasminogen is used to prevent pseudomembranes formation (Blood 108:3021-3026, 2006, Ophthalmology 129:955-957, 2022).
METHODS: We present the case of a sixteen-year-old girl with LC with severe left eye involvement. We reported the clinical conditions of the patient before and after the use of topical plasminogen eye drops and described the treatment schedule allowing the surgical procedure for the pseudomembranes debulking and the subsequent use of ocular prosthesis for aesthetic rehabilitation.
CONCLUSIONS: The patient showed a progressive response to the topical plasminogen, with a complete absence of pseudomembrane formation at a twelve-year follow-up, despite using an ocular prosthesis.

OBJECTIVE: To analyse the ocularist\'s perspective on the management of the anophthalmic socket and external ocular prosthesis (EOP).
METHODS: Ocularists from two countries were invited to participate in an online questionnaire. Data were collected on demographics, anophthalmic socket and EOP management (manufacturing, use, cleaning), complications, follow-up visits and multidisciplinary care. The frequency and proportions of the responses were statistically analysed.
RESULTS: The questionnaire was addressed to 20 Brazilian and 17 Spanish ocularists, obtaining a response rate of 65% and 64.7%, respectively. 62.5% of respondents were men. The most common cause of anophthalmia in Brazil (69.2%) and Spain (36.4%) is an eye disease (chi square: p = 0.188). Polymethylmethacrylate (PMMA) is the most commonly used material in EOP manufacture (chi square: p = 0.448), and 70.8% reported using customized EOPs (chi square: p = 0.069). Deposits are frequently observed in both countries (chi square: p = 0.157). Changing the prosthesis is recommended after 5 to 10 years by Brazilian ocularists, and after less than 5 years of use by Spanish ocularists (81.8%) (chi square: p = 0.041). Annual follow-up is recommended by Spanish ocularists (45.5%), while semestral (38.5%) and case-dependent (38.5%) follow-up is recommended by Brazilian ocularists (chi square: p = 0.267). Daily cleaning is advocated by 61.5% of Brazilian ocularists and once a month by 45.5% of Spanish ocularists (chi square: p = 0.098), with 75% of ocularists from both countries not recommending EOP removal at night (Fisher´s exact test: p = 0.166). Good communication between ocularists and ophthalmologists was reported by 87.5% of our responders (chi square: p = 0.642).
CONCLUSIONS: Although there are no unified protocols on the management of EOPs, Brazilian and Spanish ocularists follow similar guidelines. Differences between countries were the patients´ referral and the prosthesis´ useful life.

To explore the changes of bacterial flora in anophthalmic patients wearing ocular prosthesis (OP) and the microbiome diversity in conditions of different OP materials.
A cross-sectional clinical study was conducted, involving 19 OP patients and 23 healthy subjects. Samples were collected from the upper, lower palpebral, caruncle, and fornix conjunctiva. 16S rRNA sequencing was applied to identify the bacterial flora in the samples. The eye comfort of each OP patient was determined by a questionnaire. In addition, demographics information of each participant was also collected.
The diversity and richness of ocular flora in OP patients were significantly higher than that in healthy subjects. The results of flora species analysis also indicated that in OP patients, pathogenic microorganisms such as Escherichia Shigella and Fusobacterium increased significantly, while the resident flora of Lactobacillus and Lactococcus decreased significantly. Within the self-comparison of OP patients, compared with Polymethyl Methacrylate (PMMA), prosthetic material of glass will lead to the increased colonization of opportunistic pathogens such as Alcaligenes, Dermabacter and Spirochaetes, while gender and age have no significant impact on ocular flora.
The ocular flora of OP patients was significantly different from that of healthy people. Abundant colonization of pathogenic microorganisms may have an important potential relationship with eye discomfort and eye diseases of OP patients. PMMA, as an artificial eye material, demonstrated potential advantages in reducing the colonization of opportunistic pathogens.

OBJECTIVE: Enucleation is a common treatment modality performed for pediatric retinoblastoma patients, and the resultant defects are reconstructed using an ocular prosthesis. The prostheses are modified or replaced periodically, as the child develops due to orbital growth and patient-error. The purpose of this report is to evaluate the replacement frequency of prostheses in the pediatric oncologic population.
METHODS: A retrospective review was completed by the two senior research investigators, of patients that had ocular prostheses fabricated following enucleation of their retinoblastoma from 2005 to 2019 (n = 90). Data collected from the medical records of the patient included the pathology, date of surgery, date of prosthesis delivery, and the replacement schedule of the ocular prosthesis.
RESULTS: During the 15-year study period, 78 enucleated observations (ocular prosthesis fabricated) were included for analysis. The median age of the patients at the time of delivery of their first ocular prosthesis was calculated to be 2.6 years (range 0.3-18 years). The median time to the first modification of the prosthesis was calculated to be 6 months. The time to modification of the ocular prosthesis was further stratified by age.
CONCLUSIONS: Pediatric patients require modification of their ocular prostheses throughout their growth and development period. Ocular prostheses are reliable prostheses with predictable outcomes. This data is helpful to set an expectation among the patient, parent, and provider.