Denture fractures are a common problem in dental practice, and their repair is considered a first option to restore their functional properties. However, the inter-material resistance may become compromised. Typically, the bond between these materials weakens. Therefore, various surface treatment methods may be considered to enhance their mechanical properties. Poly(methyl methacrylate) (PMMA) heat-polymerized resin (HPR) was used as the repaired material, cold-polymerized material (CPR) for the repairs, and different variants of alumina abrasive blasting (AB), methyl methacrylate (M), ethyl acetate (EA), methylene chloride (CH), and isopropyl alcohol (IA) treatments were applied. Finally, combined surface treatments were chosen and analyzed. Surface morphologies after treatments were observed by scanning electron microscopy and the flexural, shear, and impact strengths were tested. AB and chemical treatment with CH, M, and EA was used to improve all mechanical properties, and further improvement of the properties could be achieved by combining both types of treatments. Varied changes in surface morphologies were observed. Treatment with IA yielded less favorable results due to the low impact strength. The best results were achieved for the combination of AB and CH, but during the application of CH it was necessary to strictly control the exposure time.

Cerebrospinal fluid-contacting neurons (CSF-cNs) represent a distinct group of interneurons characterized by their prominent apical globular protrusions penetrating the spinal cord\'s central canal and their basal axons extending towards adjacent cells. Identified nearly a century back, the specific roles and attributes of CSF-cNs have just started to emerge due to the historical lack of definitive markers. Recent findings have confirmed that CSF-cNs expressing PKD2L1 possess attributes of neural stem cells, suggesting a critical function in the regeneration processes following spinal cord injuries. This review aims to elucidate the molecular markers of CSF-cNs as potential neural stem cells during spinal cord development and assess their roles post-spinal cord injury, with an emphasis on their potential therapeutic implications for spinal cord repair.

BACKGROUND: The Viabahn endoprosthesis has become a vital option for endovascular therapy, yet there is limited long-term data on its effectiveness for peripheral aneurysm repair. This study aimed to evaluate the safety, technical and clinical success, and long-term patency of the Viabahn endoprosthesis for treating femoropopliteal aneurysms.
METHODS: This retrospective tertiary single-center study analyzed patients who underwent a Viabahn endoprosthesis procedure for femoropopliteal aneurysm repair from 2010 to 2020. Intraoperative complications, technical and clinical success rates, and major adverse events (MAE, including acute thrombotic occlusion, major amputation, myocardial infarction, and device- or procedure-related death) at 30 days were assessed. Incidence of clinically-driven target lesion revascularisation (cdTLR) was noted. Patency rates were evaluated by Kaplan-Meier analysis.
RESULTS: Among 19 patients (mean age, 72 ± 12 years; 18 male, 1 female) who underwent aneurysm repair using the Viabahn endoprosthesis, there were no intraoperative adverse events, with 100% technical and clinical success rates. At the 30-day mark, all patients (19/19, 100%) were free of MAE. The median follow-up duration was 1,009 days [IQR, 462-1,466]. Popliteal stent graft occlusion occurred in 2/19 patients (10.5%) after 27 and 45 months, respectively. Consequently, the primary patency rates were 100%, 90%, 74% at 12, 24, and 36-72 months, respectively. Endovascular cdTLR was successful in both cases, resulting in sustained secondary patency at 100%.
CONCLUSIONS: The use of Viabahn endoprostheses for femoropopliteal aneurysm repair demonstrated technical and clinical success rates of 100%, a 0% 30-day MAE rate, and excellent long-term patency.

The initial treatment of open laryngeal trauma must be implemented immediately, with the primary focus on saving lives. However, in the later stages, various factors may cause changes in the structure and function of the larynx, which requires special attention. This article reports on the treatment process of a patient with depression who suffered from laryngeal trauma. Due to the late stage of laryngeal infection causing laryngeal defects, a hyoid epiglottis combined with sternocleidomastoid muscle clavicular flap repair was performed. Additionally, personalized functional exercise was performed, ultimately resulting in recovery.
摘要: 开放性喉外伤的初始救治需争分夺秒，以抢救生命为主，但后期可能会因各种因素导致喉结构及功能的改变，需要特别重视。本文报道1例抑郁症患者喉外伤的救治过程，因为后期伴有喉感染引起喉缺损行舌骨会厌联合胸锁乳突肌锁骨瓣修复，并行个体化的功能锻炼，最后痊愈。.

In recent years, heavy metal pollution has become increasingly prominent, severely damaging ecosystems and biodiversity, and posing a serious threat to human health. However, the results of current methods for heavy metal restoration are not satisfactory, so it is urgent to find a new and effective method. Peptides are the units that make up proteins, with small molecular weights and strong biological activities. They can effectively repair proteins by forming complexes, reducing heavy metal ions, activating the plant\'s antioxidant defense system, and promoting the growth and metabolism of microorganisms. Peptides show great potential for the remediation of heavy metal contamination due to their special structure and properties. This paper reviews the research progress in recent years on the use of peptides to remediate heavy metal pollution, describes the mechanisms and applications of remediation, and provides references for the remediation of heavy metal pollution.

Cancer is a significant global public health issue with increasing morbidity and mortality rates. To address this challenge, novel drug carriers such as nano-materials, liposomes, hydrogels, fibers, and microspheres have been extensively researched and utilized in oncology. Among them, polymer microspheres are gaining popularity due to their ease of preparation, excellent performance, biocompatibility, and drug-release capabilities. This paper categorizes commonly used materials for polymer microsphere preparation, summarizes various preparation methods (emulsification, phase separation, spray drying, electrospray, microfluidics, and membrane emulsification), and reviews the applications of polymer microspheres in cancer diagnosis, therapy, and postoperative care. The current status and future development directions of polymer microspheres in cancer treatment are analyzed, highlighting their importance and potential for improving patient outcomes.

Flexor tendon injury is a common hand trauma that requires surgical repair. The objective was to compare the repaired strength and gliding resistance with a varied number of repair strands and of square knots using a two-strand-overhand locking (TSOL) knot. First, isolated suture loops with different number of suture strands and number of closing knots were compared in mechanical strength and failure mode. Then, 90 flexor digitorum profundus (FDP) tendons from turkey digits were used for the tendon repair experiment. Both phases followed a similar 3 × 3 matrix comparing the knot type including TSOL+1SK (square knot), TSOL+2SK, and TSOL+3 SK and repair techniques including two-, four-, and six-strand repairs techniques respectively. The repaired tendons were tested for tendon resistance against pulley (friction), maximum force, force at 2 mm displacement, stiffness, and failure mode. Increasing the number of strands and closing square knots increases the tensile strength and stiffness of flexor tendon repairs and isolated suture loops without a significant effect on tendon friction. An increase in the number of square knots have shown increased strength only in Pennington repair, which correlated with the increased number of knot unraveling, a weak knot failure model. Our data demonstrated that increasing the number of strands is effective for improving the overall strength of tendon repair. When a two-strand repair is chosen, increasing knot number can improve repair strength. However, the number of knots appears not affecting repair strength in six-strand repair technique.

Tympanic membrane perforation (TMP) is prevalent in clinical settings. Patients with TMPs often suffer from infections caused by Staphylococcus aureus and Pseudomonas aeruginosa, leading to middle ear and external ear canal infections, which hinder eardrum healing. The objective of this study is to fabricate an enzyme-responsive antibacterial electrospun scaffold using poly(lactic-co-glycolic acid) and hyaluronic acid for the treatment of infected TMPs. The properties of the scaffold were characterized, including morphology, wettability, mechanical properties, degradation properties, antimicrobial properties, and biocompatibility. The results indicated that the fabricated scaffold had a core-shell structure and exhibited excellent mechanical properties, hydrophobicity, degradability, and cytocompatibility. Furthermore, in vitro bacterial tests and ex vivo investigations on eardrum infections suggested that this scaffold possesses hyaluronidase-responsive antibacterial properties. It may rapidly release antibiotics when exposed to the enzyme released by S. aureus and P. aeruginosa. These findings suggest that the scaffold has great potential for repairing TMPs with infections.

UNASSIGNED: This study investigates various surface treatment methods to assess shear bond strength between set Cention N (alkasite-based restorative material) and new alkasite based restorative material. Assessing different surface treatments provide insights in optimizing repair procedure that enables durability of the restoration, thus potentially benefitting clinical outcomes.
UNASSIGNED: A total of 48 alkasite based restorative material blocks, measuring 4 mm in depth and 4 mm in diameter, were prepared. The samples were randomly divided into 8 groups (n = 6) according to the surface treatment done. Group I: Surface preparation by bur; Group II: Surface treatment by laser; Group III: Application of 2-step etch and rinse adhesive (Adper Single Bond 2 adhesive),Group IV: Application of single step self-etch adhesive (Scotchbond Universal adhesive); Group V: Bur preparation followed by application of 2-step etch and rinse adhesive; Group VI: Bur preparation followed by application of single step self-etch adhesive; Group VII: Laser preparation followed by application of 2-step etch and rinse adhesive; and Group VIII: Laser preparation followed by application of single step self-etch adhesive. Post-surface preparation, all the specimens were restored with newly mixed alkasite material. Repair bond strength measurements were assessed with universal testing machine. Shapiro-Wilk and Levene\'s tests were used to check normality and Homogeneity of variance. ANOVA with post-hoc Games-Howell test and two-way ANOVA with post-hoc Bonferroni test was performed to evaluate the influence of surface preparation on the repair bond strength.
UNASSIGNED: Using a 2-step etch and rinse adhesive resulted in a higher repair bond strength (26.05±2.12) compared to other surface treatments. In contrast, roughening of the surface with burs led to lowest repair bond strength (17.06±3.29) (P=0.02).
UNASSIGNED: Application of 2-step etch and rinse adhesive to the existing alkasite based restorative material provides superior bonding with the newly added alkasite based restorative material.

BACKGROUND: The repair process of periradicular tissues depends, among other factors, on the properties of endodontic cements. One of the main cells involved in this process are macrophages.
METHODS: Murine peritoneal macrophages obtained from C57BL/6 (MBL6) and BALB/c (MBalb) mice, respectively, were cultured with capillaries containing or not Endosequence BC Sealer® (BC), Sealer Plus BC® (MK), Bio C Sealer (Ang) and MTA®. Cell viability was measured by trypan blue and MTT methods at 24, 48 and 72 hours. Cell adhesion, phagocytosis of S. boulardii, production of reactive oxygen species (ROS), nitric oxide (NO), and the cytokines TNF-α and TGF-β, were also evaluated. The data were analysed using the ANOVA test (p<0.05).
RESULTS: Cell viability was similar between bioceramic sealers and MTA (p>0.05). There was no statistical difference between both macrophages when adherence and phagocytose were assayed. The presence of inflammation stimulus significantly altered the production of ROS by MBL6 macrophages in contact with the cements. The production of TGF-β was similar for both lineages of macrophages.
CONCLUSIONS: This study shows that the evaluated bioceramic cements do not interfere with MBL6 and MBalb macrophages adhesion, phagocytic capacity, as well as TGF-β production. The cements stimulated the production of ROS by MBL6 macrophages in response to induced inflammation, potentially favouring the elimination of residual pathogens.