BACKGROUND: Dental caries is the most common chronic disease worldwide, and various forms of fluoride are considered useful preventive tools. The production of nanoscale materials can significantly improve their mechanical and chemical properties. The present study compared the microhardness of primary tooth enamel after applying sodium fluoride varnish (conventional) and nano-sodium fluoride varnish.
METHODS: Sixty-eight sound canine teeth were selected in this experimental study. The teeth were mounted so that the buccal surface was exposed. A 3 × 3 mm square was obtained on the buccal surface of the crown of each tooth. Enamel surfaces were polished using sandpaper in the presence of water as a coolant. The samples were randomly divided into four groups (n = 17): G1, conventional 5% NaF; G2, 1% nano-NaF; G3, 5% nano-NaF; G4, control. The initial microhardness was measured. Before surface treatment with different fluoride compounds, the samples were placed in a demineralizing solution for two days, and the microhardness of all the samples was re-measured. Then G1, G2, and G3 were treated with the fluoride type specified for each group, and G4 was treated as a control (without treatment). Finally, pH cycling was applied, and the microhardness was measured again. Data were analyzed with SPSS 20, using Repeated measure ANOVA and post-hoc Tukey tests. P < 0.05 was considered significant.
RESULTS: Repeated measure ANOVA showed that microharness of G1, G2, G3, and G4 was statistically significant different. Tukey tests showed that the microhardness of G1, G2, and G3 were not significantly different. However, these three groups exhibited significantly more microhardness than the control group (P = 0.024, P = 0.027, and P = 0.010).
CONCLUSIONS: There was no significant differences in enamel microhardness of deciduous teeth between conventional 5% NaF,1% nano-NaF and 5% nano-NaF.

BACKGROUND: Sparse research exists on predictors of element concentrations measured in deciduous teeth.
OBJECTIVE: To estimate associations between maternal/child characteristics, elements measured in home tap water during pregnancy and element concentrations in the dentin of shed deciduous teeth.
METHODS: Our analysis included 152 pregnant person-infant dyads followed from the second trimester through the end of the first postnatal year from the New Hampshire Birth Cohort Study. During pregnancy and early infancy, we collected dietary and sociodemographic information via surveys, measured elements in home tap water, and later collected naturally exfoliated teeth from child participants. We measured longitudinal deposition of elements in dentin using LA-ICP-MS. Multivariable linear mixed models were used to estimate associations between predictors and dentin element concentrations.
RESULTS: We measured 12 elements in dentin including those previously reported (Ba, Mn, Pb, Sr, Zn) and less frequently reported (Al, As, Cd, Cu, Hg, Li, and W). A doubling of Pb or Sr concentrations in water was associated with higher dentin Pb or Sr respectively in prenatally formed [9% (95%CI: 3%, 15%); 3% (1%, 6%)] and postnatally formed [10% (2%, 19%); 6% (2%, 10%)] dentin. Formula feeding from birth to 6 weeks or 6 weeks to 4 months was associated with higher element concentrations in postnatal dentin within the given time period as compared to exclusive human milk feeding: Sr: 6 weeks: 61% (36%, 90%) and 4 months: 85% (54%, 121%); Ba: 6 weeks: 35% (3.3%, 77%) and 4 months: 42% (10%, 83%); and Li: 6 weeks: 61% (33%, 95%) and 4 months: 58% (31%, 90%).
CONCLUSIONS: These findings offer insights into predictors of dentin elements and potential confounders in exposure-health outcome relationships during critical developmental periods.

暂无摘要。

UNASSIGNED: The aim of the current research was to appraise the effectiveness of different radicular canal irrigant solutions on the elimination of the smear layer in deciduous teeth.
UNASSIGNED: A total of 60 fit deciduous teeth that were subjected to extraction for a variety of curative reasons were employed in this research. Every sample tooth was subjected to decoronation at the CEJ employing a carborundum disk. A number 10 K-file (Dentsply Maillefer) was utilized to estimate the working length of the radicular canal using a manual technique by a sole operator in the step-back method. The specimens were allocated at random to one of the following three groups: Group 1: Irrigation using Saline, Group 2: Irrigation using 6% Citric acid, and Group 3: Irrigation using sodium hypochlorite. Following 24 h of storage, the sample teeth were subjected to vertical grooving using diamond suctioning discs beneath a high-power suction. All sections were subjected to staining using 1% methylene blue for 2 min before rinsing with 0.9% saline and allowed to bench dry. Rendering scores for the existence of a smear layer for the two halves of the split sample tooth were performed by visual inspection for the cervical, middle, plus apical one-third via a light stereomicroscope at 40× magnifying power.
UNASSIGNED: With saline irrigation, the smear coat elimination at coronal one-third scored at 2.16 ± 0.11, 1.84 ± 0.06 at middle one-third, along with 1.92 ± 0.26 at the apical one-third. When 6% citric acid was employed as an irrigant, the scores were 0.72 ± 0.14 at coronal one-third, 0.84 ± 0.03 at middle one-third, and 0.90 ± 0.23 at apical one-third. When sodium hypochlorite was used as an irrigant, the mean score was 0.78 ± 0.12 at the coronal one-third, 0.92 ± 0.06 at the middle one-third, as well as 0.96 ± 0.18 at the apical one-third. The differences between the groups were statistically significant.
UNASSIGNED: The current in-vitro research arrived at a conclusion that 6% citric acid has the potential to eliminate smear coats in deciduous radicular canals when employed as a closing irrigant following instrumentation.

BACKGROUND: The purpose of this study was to compare the three-dimensional dental changes for the maxillary first molars and the overall skeletal effects achieved after expansion between the rapid maxillary expansion (RME) appliance attached to two different anchor units, the maxillary deciduous molars and the maxillary permanent first molars.
METHODS: Patients were retrospectively selected according to the anchorage unit used for RME: deciduous upper second molars (RME-E group; 10 M, 10 F; mean age 8.4 ± 1.1 years) and first upper permanent molars (RME-6 group; 10 M, 10 F; mean age 12.6 ± 1.8 years). CBCT scans were obtained before treatment start (T1) and after retention and removal of the expander (T2). Images were analyzed using a new three-dimensional intra-hemi-maxillary reference system. 3D landmarks were marked to calculate all changes on maxillary first permanent molars; mesio-distal and buccal-lingual inclination and rotation, as well as intermolar and interforaminal distances were calculated. The Wilcoxon test was used to compare within-group changes, whereas the Mann-Whitney test was used to compare between-group differences, with the significance level set at 0.05.
RESULTS: In the RME-E group, significant distorotation and lingual inclination of the first permanent molars at T2 were observed (p < 0.01); in the RME-6 group, only the buccolingual inclination of the crossbite side after RME was resulted statistically significant (p < 0.01). In both groups, intermolar and interforaminal values increased significantly (p < 0.01). Intergroup analysis showed a significantly higher distorotation and reduced buccal inclination of maxillary first permanent molars in the RME-E group after RME (p < 0.01).
CONCLUSIONS: RME is effective in treating maxillary transverse hypoplasia; RME anchored too deciduous teeth spontaneously reduces buccal inclination and increases distorotation of maxillary first permanent molars, whereas anchorage to permanent molars is associated with increased buccal inclination, albeit with little clinical significance.

UNASSIGNED: Resorption of primary teeth and eruption of permanent teeth involves a complex series of changes. The cellular and histological changes occurring during the process of resorption vary stagewise. The knowledge of the changes occurring in the pulp of deciduous teeth would provide information about the resorptive process.
UNASSIGNED: To evaluate the histologic changes of the pulp of deciduous teeth related to different stages of physiologic root resorption.
UNASSIGNED: To establish the cause and effect relationship, a contrived histologic study design was planned.
UNASSIGNED: A total of 60 extracted deciduous incisors, canines, and molars were included in the study. The remaining root length (RRL) was determined based on the standardized photographs. The teeth were then grouped into three based on the percentage of RRL. The teeth were subjected to decalcification with 5% nitric acid, following which histological processing was performed.
UNASSIGNED: The present study being a qualitative study design, descriptively explains the histologic findings, and no statistical tests have been applied.
UNASSIGNED: During the initial stages of resorption, there were no histological alterations noted in the pulp, particularly in the cervical 3rd, with the cellular structure relatively maintained. As the resorption progresses, reversal lines were evident, indicating a process of repair occurring simultaneously during the process of resorption. With further advancement, the repair is overtaken by the resorption indicated by the presence of resorptive cells. Neovascularization and an increase in immune cells are also evident in advanced stages.
UNASSIGNED: The pulp exhibits progressive changes as the resorption continues from stage I to stage III. The changes vary from a smaller number of immune cells and odontoclasts in stage I to increasing number of the same as resorption progresses.
UNASSIGNED: Murthy P, Bhojraj N, Hegde U. Changes in Pulp and Roots of Deciduous Teeth during Different Stages of Physiologic Resorption: A Histologic Study. Int J Clin Pediatr Dent 2023;16(3):437-443.

UNASSIGNED: Minimally invasive techniques should be employed to maintain pulp vitality without affecting physiological tooth resorption for pediatric patients. This study aims to evaluate clinical and radiographic success of light cure calcium silicate and resin-modified glass ionomer (RMGI) as indirect pulp-capping agent in primary molars in children between 5 and 9 years.
UNASSIGNED: In this randomized clinical trial study, 40 primary molars with the International Caries Detection and Assessment System criteria 4-6 score were divided randomly into two groups after computerized randomization method. After caries excavation by minimally invasive dentistry principle, affected dentin was lined by either light cure calcium silicate (Group I) or RMGI (Group II) liner followed by composite restoration. Clinical success was determined with the absence of symptoms and bitewing radiographs were taken at baseline, 3, and 6 months\' interval to measure increase in dentin increment using ImageJ software. Statistical analysis for intergroup comparison was done using Paired t-test, and Independent t-test was used for intragroup comparison. The level of statistical significance was set at P < 0.05.
UNASSIGNED: Change in dentin increment seen from baseline to 6 months in Group I was 0.19 mm and in Group II was 0.20 mm (P = 0.924). Intragroup increment was statistically significant during all follow-up intervals for both the groups (Group I - P ≤ 0.001, Group II - P = 0.009). For baseline remaining dentin thickness >1.5 mm, statistically significant increase was observed in the dentin increment at 3 months\' interval between both the groups.
UNASSIGNED: Both TheraCal LC and Vitrebond show acceptable clinical and radiographic results when used in primary molars as indirect pulp treatment agents. Both the liners are equivalent to each other in terms of feasibility and cost-effectiveness but TheraCal LC can be preferred due to better handling and avoiding the manipulation step thereby reducing treatment time.

The aims of this study were to estimate the risk of caries in the permanent teeth at 12 years of age and to describe the diagnostic accuracy of caries patterns in the primary dentition at age 4 years to predict caries at age 12 years. A prospective cohort study followed children from birth to age 12 years in the city of São Leopoldo, Brazil. Sociodemographic variables were collected at birth, and dental caries was measured at 4 and 12 years of age (n = 204). At 4 years, children were classified according to the presence of caries (cavitated and non-cavitated lesions), number of lesions, affected segment (anterior or posterior), and affected surface (occlusal, smooth, or proximal). Prediction of permanent dentition caries occurrence (DMFT ≥1) (primary outcome) involved Poisson regression with robust variance and standard diagnostic accuracy measures. The prevalences of caries at age 4 years (including non-cavitated lesions) and 12 years were 61.8% and 42.2%, respectively. All caries patterns in the primary dentition were associated with caries in the permanent dentition. In multivariable analysis, the strongest associations were carious lesions on the primary posterior teeth (RR 2.2; 95% CI 1.5-3.2) and occlusal surfaces (RR 2.1; 95% CI 1.4-3.0). Among patterns evaluated, the presence of any tooth with caries (cavitated or non-cavitated) had the highest sensitivity (73%), but any tooth with cavitated decay had the highest accuracy (67%). In conclusion, any dental caries experience in early childhood is strongly predictive of dental caries experience in early adolescence. Primary dentition carious lesions on the posterior teeth or occlusal surfaces and the presence of cavitated lesions were stronger predictors.

UNASSIGNED: The present study aimed to evaluate the effectiveness of pulp tissue collected from deciduous teeth for the determination of gender using polymerase chain reaction (PCR).
UNASSIGNED: 140 extracted deciduous teeth were selected. The control group comprised 20 teeth that were subjected to DNA analysis immediately. Whereas Group I and Group II consisted of 60 teeth which were stored in the open environment and salt water, respectively, for a period of 3, 9, and 15 months. DNA was isolated and quantified followed by the amplification of X and Y chromosomes by PCR and compared with the actual gender of the child. The data were analysed using the Shapiro-Wilk test, the independent sample t-test, paired t-test, and the Chi-square test.
UNASSIGNED: The PCR analysis results of Group I showed a more correct interpretation of gender as compared to Group II on storage for a period of 15 months. The PCR analysis results of the Control group showed a 100% accuracy rate as compared to the samples in Groups I and II.
UNASSIGNED: Gender could be effectively determined from the samples evaluated immediately after extraction. But the period of storage and the method of storage conditions affected the quality of isolated DNA and thus decreased the ability of gender determination.

UNASSIGNED: Strip crowns are the first treatment of choice for restoring anterior teeth affected with early childhood caries. However, shade matching of resin composites is still an issue. The broad color matching ability of a recently introduced single shade composite, Omnichroma eliminates the need for shade-matching procedure, reduces composite inventory, and minimizes chair-side time.
UNASSIGNED: The aim is to evaluate the color match, color stability, and retention of one shade universal composite resin, Omnichroma and nanohybrid resin composite, Tetric-N-Ceram.
UNASSIGNED:
UNASSIGNED:
UNASSIGNED: The study design involves split-mouth randomized controlled trial.
UNASSIGNED:
UNASSIGNED:
UNASSIGNED: The study was conducted on 25 children aged 3-5 years with multi-surface caries lesions in primary maxillary anterior teeth. Teeth were allocated to two groups randomly: Group 1 - One shade universal composite, Omnichroma (n = 25), Group 2 - Nanohybrid composite, Tetric-N-Ceram (n = 25). After caries excavation and tooth preparation, teeth were restored with corresponding materials using strip crowns. Color match at baseline, color stability, and retention after 6- and 12-month follow-up were evaluated using the Modified United States Public Health Services criteria.
UNASSIGNED:
UNASSIGNED: The Mann-Whitney U test and Wilcoxon signed-rank test were used to analyze the data.
UNASSIGNED: On comparison of Omnichroma and Tetric-N-Ceram groups, no statistically significant difference was observed in the color match at baseline (P = 0.716) as well as color stability (P = 0.575 at 6 months and 0.990 at 12 months) and retention (P = 0.153 at 6 months and 0.226 at 12 months) at both 6- and 12-month intervals. On intragroup comparison, the difference in the color stability at 6 and 12-month interval was statistically significant (P = 0.001) for both the groups, indicating that the color stability of restorations was better at 6-month interval compared to 12-month interval. In both Omnichroma and Tetric-N-Ceram groups, retention of restorations was better at 6-month interval compared to 12-month interval and this difference was statistically significant (P = 0.025 and 0.014, respectively).
UNASSIGNED: The clinical performance of Omnichroma in terms of color match, color stability, and retention was comparable to nanohybrid composite, Tetric-N-Ceram.