working length

工作长度
  • 文章类型: Journal Article
    目的是分析根尖壁架对根管消毒的影响。对44颗单根牙齿进行显微CT扫描,并接种粪肠球菌。在S组中,在工作长度(WL)处用ProTaperNext(PTN)直到X3进行成形。在L组中,使用K-Files#40创建了根尖壁架,并完成了直到PTNX3的整形。交替使用5%NaOCl和10%EDTA冲洗液。使用共聚焦激光扫描显微镜(CLSM)和活力染色来分析死(红色)和活(绿色)细菌的比例以及牙本质小管内的渗透能力。用具有Bonferroni校正的Mann-Whitney检验分析数据(p<0.05)。在L组中,红色荧光的量显著降低,根尖和中段穿透能力下降(p<0.05)。根尖壁架的存在可能会对根尖和中部三分之一的消毒产生负面影响。
    The aim was to analyse the influence of an apical ledge on root canal disinfection. Forty-four single-rooted teeth were micro-CT scanned and inoculated with Enterococcus faecalis. In Group S shaping was performed with ProTaper Next (PTN) up to X3 at working length (WL). In Group L an apical ledge was created with K-Files #40 and shaping completed up to PTN X3. NaOCl 5% and EDTA 10% irrigant solutions were alternated. Confocal laser scanning microscope (CLSM) and viability staining were used to analyse the proportions of dead (red) and live (green) bacteria and penetration ability inside dentinal tubules. Data were analysed with the Mann-Whitney test with Bonferroni correction (p < 0.05). In Group L the amount of red fluorescence resulted significantly lower, and penetration ability was decreased in the apical and middle portion (p < 0.05). The presence of an apical ledge may negatively influence the disinfection both in the apical and middle third.
    导出

    更多引用

    收藏

    翻译标题摘要

    我要上传

    求助全文

  • 文章类型: Journal Article
    背景:传统上,X射线照片用于评估根管的工作长度。然而,使用电子顶点定位器(EAL)可能是非侵入性的选择。这项研究旨在评估电子根尖定位器(EAL)与射线照相测量相比在确定根管工作长度方面的准确性。
    方法:该研究评估了EAL在不同情况下的表现,包括血液和牙髓组织的存在,使用乙二胺四乙酸(EDTA),次氯酸钠(NaOCl)作为冲洗剂,和生理盐水后的仪器。电子顶点定位器(DTEDPEX-V;啄木鸟,中国)与传统的X光片一起用于测量144根管治疗中的工作长度。Bland-Altman分析用于比较EAL和使用Jamovi软件的射线照片之间的测量值。v2.4.8(https://www.jamovi.org/)。
    结果:研究结果表明,在所有测试环境中,EAL和射线照相测量之间存在很强的相关性。皮尔逊相关系数在0.944到0.998之间。Bland-Altman分析表明存在偏差;当将EAL测量值与射线照相测量值进行比较时,平均差异为负,接近于零(纸浆:-0.354,EDTA:-0.0972,NaOCl:-0.0382,盐水:-0.0139)。
    结论:使用诸如DTEDPEX-V之类的电子根尖定位器对根管的工作长度测量与传统的射线照相测量相当。灌溉剂的使用改善了测量。EAL有可能替代用于根管长度测量的侵入性X射线照片。
    BACKGROUND: Traditionally, radiographs were used to assess the working length of root canals. However, the use of Electronic Apex Locators (EAL) may be a non-invasive alternative. This study aimed to evaluate the accuracy of the electronic apex locator (EAL) compared to radiographic measurements in determining the working length of root canals.
    METHODS: The study assessed the performance of EALs in different scenarios, including the presence of blood and pulp tissue, the use of ethylenediaminetetraacetic acid (EDTA), sodium hypochlorite (NaOCl) as an irrigant, and post-instrumentation with normal saline. An electronic apex locator (DTE DPEX-V; Woodpecker, China) was used alongside traditional radiographs to measure the working length in 144 root canal treatments. Bland-Altman analysis was used to compare the measurements between EAL and radiographs using Jamovi software, v2.4.8 (https://www.jamovi.org/).
    RESULTS: The findings revealed strong correlations between EAL and radiographic measurements across all testing environments, with Pearson\'s correlation coefficients ranging from 0.944 to 0.998. The Bland-Altman analysis suggests bias; the average difference was negative and close to zero (Pulp: -0.354, EDTA: -0.0972, NaOCl: -0.0382, Saline: -0.0139) when EAL measurements were compared to radiographic measurements.
    CONCLUSIONS: The working length measurement of root canals using an electronic apex locator such as DTE DPEX-V is comparable to traditional radiographic measurements. The use of irrigants improves the measurement. The EAL has the potential to be an alternative to the invasive radiograph for root canal length measurement.
    导出

    更多引用

    收藏

    翻译标题摘要

    我要上传

       PDF(Pubmed)

  • 文章类型: Journal Article
    背景:牙髓治疗旨在根除根管空间以及牙齿根尖周(PA)区域内的微生物感染和炎症过程。为了实现这一点,运河应该清理干净,shaped,消毒,并封闭到适当的工作长度。临床上,工作长度被描述为从冠状参考点到位于根尖孔的生理顶点的测量值。在现有文献中,电子根尖定位器(EAL)与根尖(PA)X线照片是最可靠和精确的工具,用于确定工作长度在常规根管治疗。因此,这项回顾性临床研究的目的是评估与标准临床测量方法相比,锥形束计算机断层扫描(CBCT)在测量牙髓工作长度方面是否可靠和准确.
    方法:确定符合纳入标准的患者。一位研究生牙髓住院医师对锥形束计算机断层扫描扫描结果视而不见,治疗了需要牙髓治疗的视野中的所有牙齿。使用JMoritaRootZXII根尖定位器确定根管长度(JMoritaCorp.,京都,日本)和根尖X射线照片。牙科放射学专家解释预先存在的锥形束计算机断层扫描(CBCT)扫描图像并确定工作长度。EAL和CBCT的工作长度测量的统计比较在验证正态后使用配对样本t检验进行。
    结果:除仅腭管外,所有运河的工作长度均无统计学意义(t=2.16,p=0.034),表明EAL和CBCT之间的测量结果一致。
    结论:在需要牙髓治疗的牙齿中,在确定工作长度时,预先存在的锥形束计算机断层扫描扫描图像作为电子顶点定位器是准确的。这项研究的局限性在于,它仅包含有限数量的样本,并且受操作员变化的影响。
    BACKGROUND: Endodontic treatment aims to eradicate both microbial infection and inflammatory processes within the root canal space as well as in the periapical (PA) region of the tooth. To achieve this, the canals should be cleaned, shaped, disinfected, and obturated to the proper working length. Clinically, the working length is described as the measurement from the coronal reference point to the physiological apex located at the apical foramen. In the available literature, electronic apex locators (EAL) with periapical (PA) radiographs are the most reliable and precise tools for determining the working length in routine root canal treatment. Therefore, the aim of this retrospective clinical study is to evaluate if cone beam computed tomography (CBCT) scans are reliable and accurate in measuring endodontic working length compared to standard clinical measurement methods.
    METHODS: Patients who fit the inclusion criteria were identified. A postgraduate endodontic resident blinded to the cone beam computed tomography scan results treated all teeth in the field of view that needed endodontic treatment. The root canal length was determined using J Morita Root ZX II apex locator (J Morita Corp., Kyoto, Japan) and periapical radiographs. The dental radiology specialist interpreted the pre-existing cone beam computed tomography (CBCT) scan images and determined the working length. Statistical comparisons of the working length measurements of EAL and CBCT were performed using paired sample t-tests after verifying normality.
    RESULTS: No statistically significant differences in the working lengths were found in all canals with the exception of the palatal canal only (t=2.16, p=0.034), suggesting consistent measurements between EAL and CBCT.
    CONCLUSIONS: In teeth requiring endodontic treatment, pre-existing cone beam computed tomography scan images are accurate as electronic apex locators when determining the working length. A limitation of this study is that it only includes a limited number of samples and is affected by operator variation.
    导出

    更多引用

    收藏

    翻译标题摘要

    我要上传

       PDF(Pubmed)

  • 文章类型: Journal Article
    牙齿骨折是狗和猫最常见的创伤性颌面部损伤之一。对于功能重要的牙齿中发生的牙髓暴露骨折,文献表明,根管治疗(RCT)是一种有效的治疗选择,可能是拔牙前的选择。在美国,最常见的骨折涉及犬齿;然而,上颌第四前磨牙骨折在韩国更为常见,那里有许多中小型的狗。RCT以机械和化学方式从感染的根管中去除牙髓组织和细菌(清洁和整形),并用填充材料封闭根管,以恢复牙齿功能而没有炎症。各种技术,仪器,和用于人类的材料已经被修改用于兽医牙科。
    这项研究分析了使用三种不同的密封剂(基于硅胶的密封剂,生物陶瓷封口机,和氢氧化钙基密封剂)通过简单的单锥技术应用。
    上颌第四前磨牙RCT的总体成功率为90.83%,8.33%无故障证据(NEF)和0.83%故障。
    三种不同的密封剂之间没有显着差异。此外,先前存在的根尖周病变(PAL)被再次确认为降低RCT成功率的因素。此外,在我们的研究中分析了每个根的工作长度和主根尖文件,作为牙髓兽医的新参考。
    UNASSIGNED: Tooth fracture is one of the most common traumatic maxillofacial injuries in dogs and cats. For fractures with pulp exposure occurring in functionally important teeth, the literature indicates that root canal treatment (RCT) is an effective therapy option that may be the remedy of choice before extraction. The most commonly reported fractures in the United States involve canine teeth; however, fractures of the maxillary fourth premolars are more common in Korea, where there are many small-and medium-sized dogs. RCT mechanically and chemically removes pulp tissue and bacteria (cleaning and shaping) from the infected root canal, and obturates the root canal with filling material to restore tooth functionality without inflammation. Various techniques, instruments, and materials used in humans have been modified for application in veterinary dentistry.
    UNASSIGNED: This study analyzed the results of RCT of the maxillary fourth premolar in 120 small-and medium-sized dogs (weighing less than 25 kg) using three different sealers (silicone-based sealer, bioceramic sealer, and calcium hydroxide-based sealer) through a simple application of the single-cone technique.
    UNASSIGNED: The overall success rate of RCT in maxillary fourth premolars was 90.83%, with 8.33% no evidence of failure (NEF) and 0.83% failure.
    UNASSIGNED: There were no significant differences between the three different sealers. Furthermore, preexisting periapical lesion (PAL) was reconfirmed as a factor in reducing the success rate of RCT. In addition, the working length and master apical file of each root were analyzed in our study as a novel reference for endodontic veterinarians.
    导出

    更多引用

    收藏

    翻译标题摘要

    我要上传

       PDF(Pubmed)

  • 文章类型: Journal Article
    准确的工作长度(WL)确定对于成功的根管治疗至关重要。
    这项研究的目的是比较两种不同技术在使用第五代电子顶点定位器定位微小收缩时的差异。
    解释研究程序的详细方案已提交给机构伦理委员会。
    选择了40颗提取的人类恒牙。对于常规和实验技术,三个不同的检查者在不同的时间间隔对每个样品测量三次WL。感兴趣的人对他们的测量视而不见,分析平均值的人也被技术蒙蔽了。最后,射线照相工作长度是使用15大小的K文件获得的。用玻璃离聚物粘固剂将尺寸为20K的文件粘合到测量位置。在立体显微镜下以40倍的放大率观察每颗牙齿。测量从刀尖到根尖的距离并校准到最接近的十分之一毫米。
    使用Stata统计软件(版本17,Statacorp,学院站,德州,美国)。使用组内相关系数“ICC”和Bland-Altman图确定评估者与技术之间的一致性。
    与“常规方法”(0.93,95%)相比,“实验方法”(0.95,95%)在评估者之间显示出更好的一致性。
    实验技术表明,检查者在定位根尖孔的微小收缩方面具有完美的一致性。
    UNASSIGNED: Accurate working length (WL) determination is essential for successful root canal therapy.
    UNASSIGNED: The aim of this study was to compare the difference between two different techniques in locating minor constriction using fifth-generation electronic apex locator.
    UNASSIGNED: A detailed protocol explaining the procedures of the study was submitted to the institutional ethics committee.
    UNASSIGNED: Forty extracted human permanent canine teeth were selected. WL was measured three times for each sample by three different examiners for both the conventional and experimental techniques at different time intervals. Interexaminers were blinded to their measurements, and the person who analyzed mean value was also blinded with techniques. Finally, radiographic working length was obtained using 15 size K-file. A size 20 K-file was cemented into the measured position with glass ionomer cement. Each tooth was viewed under a stereomicroscope at ×40 magnification. The distance from the file tip to the root apex was measured and calibrated to the nearest tenth of a millimeter.
    UNASSIGNED: Using Stata statistical software (Version 17, Statacorp, College Station, Texas, USA). The agreement between raters and techniques was determined using intraclass correlation coefficient \"ICC\" and Bland-Altman plot.
    UNASSIGNED: The \"experimental method\" (0.95, 95%) showed better agreement between the raters in comparison with the \"conventional method\" (0.93, 95%).
    UNASSIGNED: The experimental technique showed perfect agreement between examiners in locating the minor constriction of the apical foramen.
    导出

    更多引用

    收藏

    翻译标题摘要

    我要上传

       PDF(Pubmed)

  • 文章类型: Journal Article
    背景:这篇文献计量学综述分析了与电子顶点定位器(EAL)相关的文章的研究趋势和主要特征。
    方法:搜索于2023年11月在WebofScienceCoreCollection上进行。叙事和系统审查,观察和干预研究,包括实验室和临床研究。两名研究人员选择了这些文章并提取了引用次数,出版年份,journal,研究设计,主题,国家,大陆,机构,作者,和关键词。使用VOSviewer软件生成协作网络。数据之间的关系由Spearman相关性确定。
    结果:搜索结果为374篇文章,其中包括294个。引用最多的文章有175次引用。最流行的杂志是牙髓学杂志(n=84)。主要的研究设计是基于实验室的(n=223)。主要主题是EAL的准确性(n=175)。PiaseckiL是文章数量最多的作者(n=11)。只有8.16%的研究是在乳牙中进行的。研究最多的国家是巴西(n=46)。亚洲(n=107)是出版物数量最多的大陆。引用次数与影响因子之间存在弱正相关(rho=.294),引文和出版年份之间存在很强的负相关(rho=-.710)。
    结论:大多数文章是对恒牙进行的实验室研究,专注于EALs的准确性。未来的研究应该优先研究乳牙,系统评价,and,特别是,临床试验。
    BACKGROUND: This bibliometric review analyzed the research trends and main characteristics of articles related to Electronic Apex Locators (EALs).
    METHODS: The search was conducted in November 2023 on the Web of Science Core Collection. Narrative and systematic reviews, observational and intervention studies, laboratory, and clinical studies were included. Two researchers selected the articles and extracted the number of citations, year of publication, journal, study design, theme, country, continent, institutions, author, and keywords. Collaborative networks were generated using the VOSviewer software. The relationship between data were determined by Spearman\'s correlation.
    RESULTS: The search resulted in 374 articles, of which 294 were included. Most cited article had 175 citations. The most prevalent journal was the Journal of Endodontics (n = 84). The predominant study design was the laboratory-based (n = 223). The predominant theme was the EALs accuracy (n = 175). Piasecki L was the author with the highest number of articles (n = 11). Only 8.16% of the studies were conducted in deciduous teeth. The country with the most studies was Brazil (n = 46). Asia (n = 107) was the continent with the highest number of publications. There was a weak positive correlation between the number of citations and impact factor (rho = .294), and a strong negative correlation between citations and year of publication (rho = -.710).
    CONCLUSIONS: The majority of articles were laboratory-based studies conducted on permanent teeth, focusing on the accuracy of EALs. Future studies should prioritize research on deciduous teeth, systematic reviews, and, notably, clinical trials.
    导出

    更多引用

    收藏

    翻译标题摘要

    我要上传

    求助全文

  • 文章类型: Journal Article
    电子顶点定位器(EAL)经常用作工作长度(WL)测定中X射线照片的佐剂。集成的根尖定位器(IAL)的引入通过在根管成形时连续监测根尖来进一步简化了根管治疗。
    本研究的目的是评估X光片的疗效,EAL,和IAL在存在各种灌溉物的情况下确定WL。
    本体内研究是对30例患者进行的,每组10例,根据使用的冲洗剂的类型;0.9%盐水(第1组),0.2%氯己定(第2组),和2.5%的次氯酸钠(NaOCL)(第3组)。在每一组中,使用常规射线照片测定WL,根ZX迷你(EAL),和CanalProCL2i(IAL)。
    Kruskal-Wallis检验和Friedman的双向ANOVA检验用于统计分析。
    根ZXMini的平均WL相对较低,而CanalProCL2i的WL和射线照相方法具有可比性。在所有方法中,使用的溶液类型不影响WL,当NaOCL用作冲洗剂时,平均WL较高。然而,上述比较无统计学意义.
    本研究中采用的灌溉溶液对顶点定位器和射线照片的性能没有影响。
    UNASSIGNED: Electronic apex locators (EALs) are frequently used as adjuvant to radiographs in working length (WL) determination. The introduction of integrated apex locators (IALs) further simplified the root canal treatment by continuous monitoring of the apex while root canal shaping.
    UNASSIGNED: The aim of this study was to evaluate the efficacy of radiographs, EAL, and IAL in determining the WL in the presence of various irrigants.
    UNASSIGNED: The present in vivo study was carried out on 30 patients who were divided into 10 in each group, based on the type of irrigant used; 0.9% saline (Group 1), 0.2% chlorhexidine (Group 2), and 2.5% of sodium hypochlorite (NaOCL) (Group 3). In each group, WL is determined using conventional radiographs, Root ZX Mini (EAL), and CanalPro CL2i (IAL).
    UNASSIGNED: Kruskal-Wallis test and Friedman\'s two-way ANOVA test were used for statistical analysis.
    UNASSIGNED: Mean WL was comparably lower with Root ZX Mini, while the WL by CanalPro CL2i and the radiographic method were comparable. In all methods, the type of solutions used did not influence the WL, with a higher mean WL when NaOCL is used as an irrigant. Nevertheless, the above comparisons were not statistically significant.
    UNASSIGNED: the irrigation solutions employed in this study had no impact on the performance of apex locators and radiographs.
    导出

    更多引用

    收藏

    翻译标题摘要

    我要上传

       PDF(Pubmed)

  • 文章类型: Journal Article
    背景:间接复位微创钢板接骨术(MIPO)通常会导致胫骨骨折延迟愈合。这项研究评估了MIPO中与骨愈合有关的几个因素。
    目的:我们假设骨折间隙,钢板-胫骨距离,或工作长度会对胫骨结合率产生重大影响。
    方法:41例使用MIPO技术进行内固定手术的单纯性干骨干或胫骨远端干骨干端骨折患者分为两组:延迟愈合患者和无延迟愈合患者。涉及AO/OTA分类的不可操作因素,腓骨骨折和可行因素,包括术后骨折间隙,钢板-胫骨距离,比较两组间工作长度与骨愈合参数的关系。根据感兴趣的变量,还研究了骨愈合的累积率和延迟愈合的危险因素。
    结果:AO/OTA分类,腓骨骨折部位,术后骨折间隙,工作长度,两组骨愈合率差异有统计学意义(P<0.05)。根据43A胫骨骨折随访1年的骨愈合累积率,腓骨远端骨折,断裂间隙,两组间工作时长差异有统计学意义(P<0.05)。通过单变量Cox比例风险模型,43A胫骨骨折,腓骨远端骨折,制造间隙,工作时间短是延迟愈合的危险因素(P<0.05)。
    结论:涉及AO/OTA分类的不可操作因素,腓骨远端骨折和可操作因素,包括术后骨折间隙,工作长度是影响MIPO术后骨愈合的重要因素。目前的研究表明,在MIPO过程中,小的骨折间隙和长的工作长度可能有助于胫骨骨折的骨愈合。
    方法:IV;单中心回顾性队列研究。
    BACKGROUND: Indirect reduction of minimally invasive plate osteosynthesis (MIPO) can often result in delayed union in tibia fractures. This study evaluated several factors in MIPO in relation to bone union.
    OBJECTIVE: We hypothesized that the fracture gap, plate - tibia distance, or working length would have a substantial effect on the tibia union rate.
    METHODS: Forty-one patients with simple diaphyseal or distal metaphyseal tibia fractures who underwent internal fixation surgery using the MIPO technique were divided into two groups: patients with delayed union and patients without delayed union. Non-actionable factors involving AO/OTA classification, fibula fracture and actionable factors including postoperative fracture gap, plate - tibia distance, working length in relation to parameters of bone union were compared between the two groups. Also cumulative rates of bone union and risk factors of delayed union according to variables of interest were investigated.
    RESULTS: AO/OTA classification, site of fibula fracture, postoperative fracture gap, working length, and bone union rate of the two groups significantly differed (p<0.05). The cumulative rate of bone union during 1-year follow-up according to 43A tibia fracture, distal fibula fracture, fracture gap, and working length significantly differed between the two groups (p<0.05). By univariate Cox proportional hazards model, 43A tibia fracture, distal fibula fracture, facture gap, and short working length were risk factors for delayed union (p<0.05).
    CONCLUSIONS: Non-actionable factors involving AO/OTA classification, distal fibula fracture and actionable factors including postoperative fracture gap, working length were significant factors affecting bone union after MIPO. The present study indicated that small fracture gap and long working length during MIPO might facilitate bone healing in tibia fracture.
    METHODS: IV; single-center retrospective cohort study.
    导出

    更多引用

    收藏

    翻译标题摘要

    我要上传

    求助全文

  • 文章类型: Journal Article
    背景:成功的根管治疗受根管预备的根尖范围和最终的根管充填的影响。达到完整的工作长度,直到根尖收缩,通常比解剖顶点短0.5-1毫米,至关重要。使用电子顶点定位器更准确地检测工作长度。市场上有六代电子顶点定位器。没有充分研究使用每个顶点定位器选择适当的灌溉以确定准确的工作长度。方法:在干介质中使用第3代(RootZX),然后使用第6代(Raypex6)顶点定位器,测量了120颗新拔除的人类单根牙齿的实际工作长度,并将其与工作长度进行了比较。5.25%次氯酸钠的存在,和2%的氯己定,没有冠状预扩张和冠状预扩张后使用相同的灌溉介质。收集数据,列表,然后使用单因素方差分析和事后分析,以评估实际工作长度之间平均工作长度的显着差异,根ZX,和Raypex6顶点定位器工作长度精度。结果:在冠状预扩张的根中显示出明显的结果,并且使用Raypex6顶点定位器在干介质中测量了它们的工作长度。使用根ZX顶点定位器时,最准确的结果出现在冠状预扩张的根部,并且在使用氯己定冲洗溶液时测量其工作长度.结论:得出的结论是,了解要与每个特定的电子顶点定位器一起使用的特定灌溉介质对于实现最准确的工作长度结果非常重要。
    Background: Successful root canal treatment is influenced by the apical extent of root canal preparation and the eventual root canal filling. Achieving the full working length until the apical constriction, which is usually 0.5 - 1 mm shorter than the anatomical apex, is crucial. Electronic apex locators were used to detect the working length more accurately. There are six generations of electronic apex locators in the market. The selection of the appropriate irrigation with each apex locator for accurate working length determination is not fully investigated. Methods: The actual working lengths of 120 freshly extracted human single-rooted teeth were measured and compared with their working lengths using 3 rd generation (Root ZX) followed by 6 th generation (Raypex 6) apex locators in dry medium, presence of 5.25% sodium hypochlorite, and 2% chlorhexidine, without coronal pre-flaring and after coronal pre-flaring using the same irrigating media. Data were collected, tabulated, and afterward analyzed using one-way ANOVA with post-hoc to evaluate the significant difference in average working length between actual working length, Root ZX, and Raypex 6 apex locator working lengths accuracy. Results: The significant results were shown in roots that were coronally pre-flared and their working lengths were measured in a dry medium using Raypex 6 apex locator. While using the Root ZX apex locator, the most accurate results were shown in roots that were coronally pre-flared and their working lengths were measured while using a chlorhexidine irrigating solution. Conclusions: It is concluded that it is very important to know the specific irrigating medium to be used with each specific electronic apex locator to achieve the most accurate working length results.
    导出

    更多引用

    收藏

    翻译标题摘要

    我要上传

       PDF(Pubmed)

  • 文章类型: Journal Article
    根管成功需要优化工作长度(WL)。当前的研究检查了重要和非重要牙齿上不同的顶点定位器对器械大小的反应。
    评估了在保守牙科和牙髓科接受根管治疗的三百名患者(180名男性和120名女性)。因此,我们确定200颗患者的牙齿(100颗重要牙齿和100颗非重要牙齿来自上颌和下颌第一磨牙)符合纳入我们的研究。使用无菌圆形钻进入果肉室。用连续的GatesGlidden钻头(日本ManiInc.)对根管的冠状区域进行扩张,并用3%次氯酸钠(NaOCl)溶液中的任何一种进行灌溉,2%氯己定(CHX),或17%的乙二胺四乙酸(EDTA)溶液检查管道通畅后,用尺寸#10K文件,其中(#-number)。稍后,工作长度是使用Ingle\'s技术和射线照相顶点短0.5mm的射线照相(RVG)确定的。两名牙髓医生批准了此RVG。
    总的来说,#15K文件和顶点定位器与Ingle\的方法没有区别。虽然#8K文件与所有顶点定位器明显不同,#10K文件显示,除2%CHX的根ZX外,所有顶点定位器均存在显着差异(P=0.06)。灌溉不会影响顶点定位器的准确性。
    即使存在灌溉溶液,电子顶点定位器(EAL)可用于准确计算工作长度。顶点定位器#15k文件,#10k文件,和#8k文件显示了最有希望的结果。
    UNASSIGNED: Root canal success requires working length (WL) optimization. The current study examined how different apex locators on vital and non-vital teeth responded to instrument size.
    UNASSIGNED: Three hundred patients (180 men and 120 women) receiving root canal therapy at the department of Conservative Dentistry and Endodontics were evaluated. Therefore, we determined that 200 of the patients\' teeth (100 vital and 100 non-vital teeth from the upper and lower jaws\' first molars) qualified for inclusion in our study. The pulp chamber was accessed using a sterile round bur. The coronal region of the root canal was preflared with successive Gates Glidden drills (Mani Inc. Japan) and irrigated with any one of the solutions 3% sodium hypochlorite (NaOCl), 2% chlorhexidine (CHX), or 17% ethylenediaminetetraacetic acid (EDTA) solution after checking canal patency with a size #10 K file, where (#-number). Later, the working length was established using Ingle\'s technique and a radiovisiograph (RVG) 0.5 mm short of the radiographic apex. Two endodontists approved this RVG.
    UNASSIGNED: Overall, the #15 K file and apex locators did not differ from Ingle\'s method. While the #8 K file differs significantly from all apex locators, the #10 K file showed a significant difference with all apex locators except Root ZX with 2% CHX (P = 0.06). Irrigation didn\'t influence apex locators\' accuracy.
    UNASSIGNED: Even in the presence of irrigating solutions, electronic apex locator (EAL) can be utilized to calculate the working length with accuracy. The apex locators #15 k files, #10 k files, and #8 k files showed the most promising results.
    导出

    更多引用

    收藏

    翻译标题摘要

    我要上传

       PDF(Pubmed)

公众号