The durable flame-retardant functional coating of polyester/cotton (T/C) blend fabrics is both interesting and challenging. In this study, a novel in-situ polymerization strategy for phosphorus/nitrogen-based flame-retardant on T/C blend samples was developed through the polycondensation of tetramethylolphosphonium sulfate, dicyandiamide, and anionic cyclic phosphate ester. The chemical structure of the polycondensation compounds, as well as the surface morphology, combustion behavior, flame-retardant capacity, washing durability and flame-retardant mechanism of the coated T/C blend fabrics, were investigated. The coated T/C blend fabrics demonstrated excellent self-extinguishing performance, with the damaged length decreasing to as low as 8.0 cm and the LOI reaching 28 %. Moreover, the peak heat release rate of the coated T/C blend fabrics decreased by 39.7 %. The superior flame retardancy can be attributed to the enhanced dehydration and carbonization by phosphate groups in the condensed phase, as well as the quenching effect and diluting effect in the gas phase. Additionally, the coated T/C blend fabrics exhibited remarkable washing durability and still achieved self-extinguishing after 65 washing cycles, and the in-situ deposition of insoluble three-dimensional polycondensation compounds onto the T/C blend fabrics was beneficial. The flame-retardant coating had a minor impact on the whiteness, tensile strength and breathability of the T/C blend fabrics.

For protein fibers, polycarboxylic acids represent a green strategy to enhance durability without using formaldehyde. This study evaluated the physical and flame retardant properties of silk fabrics treated with three formaldehyde-free crosslinkers: citric acid (CA), 1,2,3,4-butanetetracarboxylic acid (BTCA), and 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA). Results showed that these acids bond with silk protein through esterification and amidation, improving washing durability. Particularly, PBTCA integrates phosphorus into silk, boosting flame retardancy. While BTCA led to the highest weight gain and improved wrinkle recovery, it negatively impacted the tensile strength and softness of silk fabrics. Conversely, PBTCA adeptly balanced enhanced wrinkle resistance with minimal effects on tensile strength and softness, and least affected the silk fabrics\' whiteness, thus preserving its aesthetic appeal. All crosslinkers improved flame retardancy, but PBTCA displayed superior performance, achieving a limiting oxygen index of 32.4 % at an 80 g/L concentration. In vertical burning tests, PBTCA treated silk fabrics showed reductions in damage length and demonstrated self-extinguishing properties, qualifying them for a higher flame retardant grade. Phosphorus in PBTCA promotes char formation during combustion, essential for effective flame retardation and smoke reduction. This research highlights the exceptional potential of silk treated with PBTCA, showcasing its suitability for demanding applications.

This study aimed to assess the antimicrobial activities of plant extracts from Artemisia afra and Eucalyptus globulus when used as coatings for textiles. A pulsed ultrasound-assisted extraction method (PUAE) was employed to obtain methanolic and hexanoic extracts from both plants. Eucalyptus globulus methanol extraction exhibited the highest yield at 22.76% (±0.61%), while Artemisia afra demonstrated lower yields. Phytochemical screening identified various secondary metabolites in the extracts, including phenols, quinones, and steroids. Antimicrobial tests against Staphylococcus aureus and Escherichia coli revealed varying degrees of susceptibility, with Eucalyptus globulus hexanoic extracts showing the highest activity against Staphylococcus aureus at an average percentage growth of 18.74% (±0.26%). Minimum inhibitory concentration (MIC) values were determined for the extracts, but complete inhibition did not occur at concentrations below 500 μg/mL. The extracts exhibited varying effects on Staphylococcus aureus and Escherichia coli growth, with some extracts promoting bacterial growth. Coating textiles with Eucalyptus globulus methanolic extracts demonstrated antibacterial activity against Staphylococcus aureus with the highest zone of inhibition observed in cotton-coated samples (258.4 mm2). Polyester-coated samples exhibited smaller inhibition zones, with the lowest observed in Eucalyptus globulus methanolic extract coating (65.97 mm2). Scanning electron microscope (SEM) analysis revealed visible surface morphology changes in coated fabrics, depicting fine, cluster, lumpy, flaky, and fragment-like morphologies. Laundering effects on coated fabrics were investigated, showing a significant decrease in antimicrobial activity after washing. Fourier-transform infrared spectroscopy (FTIR) identified functional groups in the extracts associated with antimicrobial properties. The complexity of the bioactive compounds suggests potential antimicrobial efficacy, resting on factors such as geographical location, climate, and extraction methods. Notwithstanding the limitations, this study contributes valuable insights into the use of plant extracts as antimicrobial coatings for textiles.

The choice of the antimicrobial agent and finishing process is very important for the activity, durability, and safety of antimicrobial fabrics. Here, a novel antimicrobial cotton fabric (HPL-CF) was constructed by covalently bonding an antimicrobial agent, hyperbranched polylysine (HPL), onto the surface of a cotton fabric (CF) pretreated with a silane coupling agent, 3-chloropropyltrimethoxysilane (CPTMS). The multiple amino groups contained in the periphery of HPL make it possible to react with the CF to form multiple bonds, which is beneficial to improve the durability and safety of HPL-CFs. The obtained HPL-CFs exhibited excellent antimicrobial activities against Escherichia coli (E. coli, Gram-negative bacteria), Staphylococcus aureus (S. aureus, Gram-positive bacteria), and Candida albicans (C. albicans, fungi) even when the CF was treated with HPL solution at the concentration of 0.5 wt %. HPL2.0-CFs maintained 98, >99, and >99% of antimicrobial ratios for E. coli, S. aureus, and C. albicans, respectively, after 50 equiv of domestic laundering cycles, surpassing the requirements of the AAA class. The halo method, cell compatibility, and skin irritation assays all prove the fine safety of HPL-CFs. This work demonstrates the great advantages of applying HPL in the antimicrobial finishing of fabrics.

A new reactive urethane-silicone softener was developed to provide a soft touch to cotton knit fabrics with improved durability to washing and dimensional stability. The reactive urethane-silicone softener consisted of an amino silicone softener and a blocked isocyanate, which can crosslink and react with cellulose surfaces. The activated isocyanate from the blocked isocyanate reacted with the amino silicone softener by heat treatment at 150 °C for 30 min. The mechanical properties of the cotton knit fabrics treated with the urethane-silicone softener were evaluated using a Kawabata Evaluation System-Fabrics (KES-FB) system. The cotton knit fabrics treated with the urethane-silicone softener showed excellent elasticity, flexibility and shear recovery as well as excellent recovery against bending deformation, and soft and smooth surface characteristics with a small coefficient of friction that were maintained even after washing 20 times.

Although the application of silver nanoparticles to commercial antibacterial items is well-established, there have been increasing concerns that such particles might leach out, particularly into laundry water from textile products. A recently developed process wherein silver nanoparticles are synthesized in situ within the cotton fiber itself promises, however, to achieve the desired washing durability. In this study, the silver release behavior of the silver nanoparticle-infused cotton fabric during consecutive launderings in water and a detergent solution was analyzed. Silver nanoparticles (12 ± 3 nm in diameter) were uniformly produced throughout the entire volume of cotton fiber with a concentration of 3017 ± 56 mg/kg. A combination of colorimetric, spectroscopic, and elemental analyses showed (1) nonlinear silver release behavior, with a rapid release from externally formed nanoparticles during the initial washing and a plateau-like release from internally formed nanoparticles during extended washing, and (2) superior nanoparticle-leach resistance compared to those in commercial and laboratory-prepared textiles analyzed in the literature. The internal nanoparticles immobilized within cotton fiber exhibited persistent antibacterial activity after 50 home laundering cycles.

A new approach employing a combination of pyrethroid and repellent is proposed to improve the protective efficacy of conventional pyrethroid-treated fabrics against mosquito vectors. In this context, the insecticidal and repellent efficacies of commonly used pyrethroids and repellents were evaluated by cone tests and arm-in-cage tests against Stegomyia albopicta (=Aedes albopictus) (Diptera: Culicidae). At concentrations of LD50 (estimated for pyrethroid) or ED50 (estimated for repellent), respectively, the knock-down effects of the pyrethroids or repellents were further compared. The results obtained indicated that deltamethrin and DEET were relatively more effective and thus these were selected for further study. Synergistic interaction was observed between deltamethrin and DEET at the ratios of 5 : 1, 2 : 1, 1 : 1 and 1 : 2 (but not 1 : 5). An optimal mixing ratio of 7 : 5 was then microencapsulated and adhered to fabrics using a fixing agent. Fabrics impregnated by microencapsulated mixtures gained extended washing durability compared with those treated with a conventional dipping method. Results indicated that this approach represents a promising method for the future impregnation of bednet, curtain and combat uniform materials.

In this study, the effect of dicarboxylic acid chain length on the amount of TiO2 nanoparticles (TiO2NPs) adsorption-produced self-cleaning property and washing durability on cotton fabrics were investigated. First, cotton fabric samples were treated with three kinds of dicarboxylic acids--oxalic, succinic, and adipic acids--and then dipped in TiO2NP solution with a certain concentration. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was used to investigate bonds formation between dicarboxylic acid groups and hydroxyl groups of cellulose, and a scanning electron microscope (SEM) was applied for the analysis of surface morphology in specimens. Drop absorbency time was determined for samples using the AATCC TM 79:2000. Washing stability and the amount absorption of TiO2NPs were determined by weighing and absorption spectrophotometry procedures, and the stain removal evaluation was conducted to assess the self-cleaning property. Results showed that all of the dicarboxylic acids used in this experiment improved the amount of TiO2NPs absorbed onto cotton samples and their durability to washing. In addition, color variation of samples treated with oxalic acid after 180 min of UV irradiation and drop absorbency time for samples treated with succinic acid were significantly increased by about 126 and 600%, respectively. The best durability was obtained from adipic acid, while a better self-cleaning property was obtained from oxalic acid.