Non-line-of-sight (NLOS) errors significantly impact the accuracy of ultra-wideband (UWB) indoor positioning, posing a major barrier to its advancement. This study addresses the challenge of effectively distinguishing line-of-sight (LOS) from NLOS signals to enhance UWB positioning accuracy. Unlike existing research that focuses on optimizing deep learning network structures, our approach emphasizes the optimization of model parameters. We introduce a chaotic map for the initialization of the population and integrate a subtraction-average-based optimizer with a dynamic exploration probability to enhance the Snake Search Algorithm (SSA). This improved SSA optimizes the initial weights and thresholds of backpropagation (BP) neural networks for signal classification. Comparative evaluations with BP, Particle Swarm Optimizer-BP (PSO-BP), and Snake Optimizer-PB (SO-BP) models-performed using three performance metrics-demonstrate that our LTSSO-BP model achieves superior stability and accuracy, with classification accuracy, recall, and F1 score values of 90%, 91.41%, and 90.25%, respectively.

With the development of wireless communication technology, Ultra-Wideband (UWB) has become an important solution for indoor positioning. In complex indoor environments, the influence of non-line-of-sight (NLOS) factors leads to increased positioning errors. To improve the positioning accuracy, fuzzy iterative self-organizing data analysis clustering algorithm (ISODATA) is introduced to process a large amount of UWB data to reduce the influence of NLOS factors, and to stabilize positioning error within 2 cm, enhances the accuracy of the positioning system. To further improve the running efficiency of the algorithm, FPGA is used to accelerate the key computational part of the algorithm, compared with running on the MATLAB platform, which improves the speed about 100 times, enhances the algorithm\'s computational speed dramatically.

This proposed design presents a novel bandpass filter employing a Marchand balun to attain ultra-wideband (UWB) performance extending from 3.1 to 10.7 GHz with 6.8 GHz central frequency and 110% FBW. The UWB bandpass filter\'s fractional bandwidth can be tailored owing to the diverse input/output impedances of the planar Marchand balun. This adaptability is accomplished by connecting two planar Marchand baluns consecutively, leveraging the concepts of transversal filter ideas and multilayer LCP technology resulting in 0.3 dB and 12 dB insertion and return losses respectively. In-depth guidelines for the formulation and synthesis of the UWB bandpass filter are incorporated.

The article presents the analysis, design, and low-cost implementation of application-specific AD converters for M-sequence-based UWB applications to minimize and integrate the whole UWB sensor system. Therefore, the main goal of this article is to integrate the AD converter\'s own design with the UWB analog part into the system-in-package (SiP) or directly into the system-on-a-chip (SoC), which cannot be implemented with commercial AD converters, or which would be disproportionately expensive. Based on the current and used UWB sensor system requirements, to achieve the maximum possible bandwidth in the proposed semiconductor technology, a parallel converter structure is designed and presented in this article. Moreover, 5-bit and 4-bit parallel flash AD converters were initially designed as part of the research and design of UWB M-sequence radar systems for specific applications, and are briefly introduced in this article. The requirements of the newly proposed specific UWB M-sequence systems were established based on the knowledge gained from these initial designs. After thorough testing and evaluation of the concept of the early proposed AD converters for these specific UWB M-sequence systems, the design of a new AD converter was initiated. After confirming sufficient characteristics based on the requirements of UWB M-sequence systems for specific applications, a 7-bit AD converter in low-cost 0.35 µm SiGe BiCMOS technology from AMS was designed, fabricated, and presented in this article. The proposed 7-bit AD converter achieves the following parameters: ENOB = 6.4 bits, SINAD = 38 dB, SFDR = 42 dBc, INL = ±2-bit LSB, and DNL = ±1.5 LSB. The maximum sampling rate reaches 1.4 Gs/s, the power consumption at 20 Ms/s is 1050 mW, and at 1.4 Gs/s is 1290 mW, with a power supply of -3.3 V.

In this paper, a novel algorithm for cooperative relative localization of multiple Unmanned Aerial Vehicles (UAVs) is proposed based on relative range and inertial measurements. In this algorithm, a relative motion estimation model is established for each group of three UAVs that can form a triangle in space. Each group member estimates the relative position and heading angle of the other group members and shares the estimation results with the other group members. When members satisfy the triangle law among their estimated relative position vectors, they can estimate more accurately. After analyzing the observability of the presented model, the necessary conditions for observability are also given, which are less restrictive compared to previous methods. Then, the presented method is compared with the decentralized consensus-based Kalman filter approach. The results of both methods are analyzed in the presence of noise and disturbances, and under the condition of disconnection between the members.

Among other methods, UWB-based multi-anchor localization systems have been established for industrial indoor localization systems. However, multi-anchor systems have high costs and installation effort. By exploiting the multipath propagation of the UWB signal, the infrastructure and thus the costs of conventional systems can be reduced. Our UWB Single-Anchor Localization System (SALOS) successfully pursues this approach. The idea is to create a localization system with sophisticated signal modeling. Therefore, measured reference, like fingerprinting or training, is not required for position estimation. Although SALOS has already been implemented and tested successfully in an outdoor scenario with multipath propagation, it has not yet been evaluated in an indoor environment with challenging and hardly predictable multipath propagation. For this purpose, we have developed new algorithms for the existing hardware, mainly a three-dimensional statistical multipath propagation model for arbitrary spatial geometries. The signal propagation between the anchor and predefined candidate points for the tag position is modeled in path length and complex-valued receive amplitudes. For position estimation, these modeled signals are combined to multiple sets and compared to UWB measurements via a similarity metric. Finally, a majority decision of multiple position estimates is performed. For evaluation, we implement our localization system in a modular fashion and install the system in a building. For a fixed grid of 20 positions, the localization is evaluated in terms of position accuracy. The system results in correct position estimations for more than 73% of the measurements.

In order to reduce the accident risk in road construction and maintenance, this paper proposes a novel solution for road-worker safety based on an untethered real-time locating system (RTLS). This system tracks the location of workers in real time using ultra-wideband (UWB) technology and indicates if they are in a predefined danger zone or not, where the predefined safe zone is delimited by safety cones. Unlike previous works that focus on road-worker safety by detecting vehicles that enter into the working zone, our proposal solves the problem of distracted workers leaving the safe zone. This paper presents a simple-to-deploy safety system. Our UWB anchors do not need any cables for powering, synchronisation, or data transfer. The anchors are placed inside safety cones, which are already available in construction sites. Finally, there is no need to manually measure the positions of anchors and introduce them to the system thanks to a novel self-positioning approach. Our proposal, apart from automatically estimating the anchors\' positions, also defines the limits of safe and danger zones. These features notably reduce the deployment time of the proposed safety system. Moreover, measurements show that all the proposed simplifications are obtained with an accuracy of 97%.

Ultra-wideband (UWB) has gained increasing interest for providing real-time positioning to robots in GPS-denied environments. For a robot to act on this information, it also requires its heading. This is, however, not provided by UWB. To overcome this, either multiple tags are used to create a local reference frame connected to the robot or a single tag is combined with ego-motion estimation from odometry or Inertial Measurement Unit (IMU) measurements. Both odometry and the IMU suffer from drift, and it is common to use a magnetometer to correct the drift on the heading; however, magnetometers tend to become unreliable in typical GPS-denied environments. To overcome this, a lightweight particle filter was designed to run in real time. The particle filter corrects the ego-motion heading and location drift using the UWB measurements over a moving horizon time frame. The algorithm was evaluated offline using data sets collected from a ground robot that contains line-of-sight (LOS) and non-line-of-sight conditions. An RMSE of 13 cm and 0.12 (rad) was achieved with four anchors in the LOS condition. It is also shown that it can be used to provide the robot with real-time position and heading information for the robot to act on it in LOS conditions, and it is shown to be robust in both experimental conditions.

Amplification of wideband high-frequency and microwave signals is a fundamental element within every high-frequency circuit and device. Ultra-wideband (UWB) sensor applications use circuits designed for their specific application. The article presents the analysis, design, and implementation of ultra-wideband differential amplifiers for M-sequence-based UWB applications. The designed differential amplifiers are based on the Cherry-Hooper structure and are implemented in a low-cost 0.35 µm SiGe BiCMOS semiconductor process. The article presents an analysis and realization of several designs focused on different modifications of the Cherry-Hooper amplifier structure. The proposed amplifier modifications are focused on achieving the best result in one main parameter\'s performance. Amplifier designs modified by capacitive peaking to achieve the largest bandwidth, amplifiers with the lowest possible noise figure, and designs focused on achieving the highest common mode rejection ratio (CMRR) are described. The layout of the differential amplifiers was created and the chip was manufactured and wire-bonded to the QFN package. For evaluation purposes, a high-frequency PCB board was designed. Schematic simulations, post-layout simulations, and measurements of the individual parameters of the designed amplifiers were performed. The designed and fabricated ultra-wideband differential amplifiers have the following parameters: a supply current of 100-160 mA at -3.3 V or 3.3 V, bandwidth from 6 to 12 GHz, gain (at 1 GHz) from 12 to 16 dB, noise figure from 7 to 13 dB, and a common mode rejection ratio of up to 70 dB.

In this paper, the issue of detecting a user\'s position in relation to the antenna geometry in ultra-wideband (UWB) off-body wireless body area network (WBAN) communication using deep learning methods is presented. To measure the impulse response of the channel, a measurement stand consisting of EVB1000 devices and DW1000 radio modules was developed and indoor static measurement scenarios were performed. It was proven that for the binary classification of user orientation, neural networks achieved accuracy that was more than 9% higher than that for the well-known threshold method. In addition, the classification of user position angles relative to the reference node was analyzed. It was proven that, using the proposed deep learning approach and the channel impulse response, it was possible to estimate the angle of the user\'s position in relation to the antenna geometry. Absolute user orientation angle errors of about 4-7° for convolutional neural networks and of about 14-15° for multilayer perceptrons were achieved in approximately 85% of the cases in both tested scenarios.