The importance of augmenting the peri-implant soft- and hard-tissue architecture is now widely accepted. However, while most contemporary research supports this premise, clinicians are encountering peri-implant soft tissue defects with increasing frequency, which they are therefore required to reconstruct. These complications can result from the difficulty of establishing an appropriate diagnosis and treatment plan or from suboptimal clinical situations (implant malposition, insufficient vestibular alveolar bone thickness or inadequate mucosal thickness). In this context, it is the peri-implant soft-tissue phenotype that most influences esthetic and health-related results in the short and long term. This article describes two clinical cases in which a modification of the apical access technique is presented that may be useful in clinical scenarios requiring large gains in mucosal thickness. Use of the modified bilaminar apical access with de-epithelialized free gingival graft technique showed promising results, with a significant increase in mucosal thickness and satisfactory outcomes in esthetics and peri-implant health.

BACKGROUND: Using three-dimensional image analysis, we previously reported suppression of ossification progression following posterior fusion surgery for cervical ossification of the posterior longitudinal ligament (OPLL). Here, we aimed to evaluate the morphological changes in thoracic OPLL using three-dimensional analysis.
METHODS: Seventeen patients (eight males and nine females; mean age, 56.9 years) who underwent posterior decompression and fusion (PDF) for thoracic OPLL were included. We evaluated the OPLL volume using a novel analysis involving creating a three-dimensional model from computed tomography images to measure the volume accurately. Additionally, OPLL thickness, width, and length were measured on sagittal and axial computed tomography planes. We investigated the morphological changes in OPLL after PDF. Furthermore, patients were classified into reduced volume and increased volume groups and associated factors were compared.
RESULTS: The mean OPLL volume was 1,677 mm3 preoperatively and 1,705 mm3 at the final examination and did not significantly differ. Volume reduction was observed in 7 of 17 cases (41 %). Although OPLL width and length significantly increased postoperatively, OPLL thickness significantly reduced from 7.1 mm preoperatively to 6.5 mm postoperatively (all, p < 0.05). The annual thickness changes significantly differed (p <0.05) in the reduced volume group (-0.36 mm/year) compared to that in the increased volume group (-0.06 mm/year).
CONCLUSIONS: Thoracic OPLL after PDF becomes thinner in the anteroposterior direction but increases horizontally and craniocaudally. The reduction in OPLL thickness was related to a reduction in ossification volume. We believe that volume reduction in thoracic OPLL is influenced by pulsation of the dural sac.

UNASSIGNED: No consensus has been established regarding the exact amount of bone grafting in maxillary sinus augmentation. The aim of this study was to estimate the minimum bone volume for sinus augmentation and to investigate the factors that influence the augmentation volume (AV).
UNASSIGNED: This study included patients with cone-beam computed tomography scanning. Dome-shaped sinus augmentation was performed virtually at vertical heights (VH) of 3, 5, 7, and 9 mm in Group A (without implantation) and Group B (with implantation). The augmentation angle (AA) and the sinus width (SW) were measured. The AV was measured using the three-dimensional image processing program 3D Slicer. Univariable and multivariable analyses were conducted.
UNASSIGNED: This study included 30 patients (120 subjects). In Group A, the mean AVs were 0.062, 0.271, 0.642, and 1.287 cc at VHs of 3, 5, 7, and 9 mm, respectively, in Group B, the mean AVs were 0.037, 0.230, 0.594, and 1.230 cc. Univariable analysis indicated that factors significantly associated with the AV in both groups included SW, AA, and VH (P < 0.001). Multivariable analysis indicated that factors significantly associated with the AV in both groups included AA and VH (P < 0.01).
UNASSIGNED: Clinicians can predict the bone volume for sinus augmentation by measuring the augmentation height and angle.

BACKGROUND: Aiming to measure and compare asymmetry of facial hard and soft tissues in patients with HFM and isolated microtia, examining how it evolves.
METHODS: This cross-sectional study assessed facial asymmetry in male East Asian patients aged 5-12 diagnosed with unilateral hemifacial microsomia (Pruzansky-Kaban types I and IIA) or isolated microtia. Using 3D imaging of computed tomography scans, it measured root-mean-square (RMS) values for surface deviations across facial regions. Statistical analyses explored differences between conditions and the relationship of age with facial asymmetry.
RESULTS: A total of 120 patients were categorized into four groups by condition (HFM or isolated microtia) and age (5-7 and 8-12 years). Patients with HFM exhibited the greatest asymmetry in the lower cheek, while those with isolated microtia showed primarily upper face asymmetry. Significant differences, except in the forehead and nasal soft tissue, were noted between the groups across age categories. Notable distinctions in hard tissue were found between age groups in the nasal and mid-cheek areas for patients with HFM (median RMS (mm) 0.9 vs. 1.1, P = 0.02; 1.5 vs. 1.7, P = 0.03) and in the nasal and upper lip areas for patients with isolated microtia (median RMS (mm) 0.8 vs. 0.9, P = 0.002; 0.8 vs. 1.0, P = 0.002). Besides these areas for HFM, no significant age-asymmetry correlation was detected.
CONCLUSIONS: Significant differences in facial asymmetry were observed between HFM and isolated microtia, with the asymmetry in specific area evolving over time.
METHODS: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

UNASSIGNED: This study aimed to investigate the relationship between temporomandibular joint (TMJ) effusion and TMJ pain, as well as jaw function limitation in patients via two-dimensional (2D) and three-dimensional (3D) magnetic resonance imaging (MRI) evaluation.
UNASSIGNED: 121 patients diagnosed with temporomandibular disorder (TMD) were included. TMJ effusion was assessed qualitatively using MRI and quantified with 3D Slicer software, then graded accordingly. In addition, a visual analogue scale (VAS) was employed for pain reporting and an 8-item Jaw Functional Limitations Scale (JFLS-8) was utilized to evaluate jaw function limitation. Statistical analyses were performed appropriately for group comparisons and association determination. A probability of p<0.05 was considered statistically significant.
UNASSIGNED: 2D qualitative and 3D quantitative strategies were in high agreement for TMJ effusion grades (κ = 0.766). No significant associations were found between joint effusion and TMJ pain, nor with disc displacement and JLFS-8 scores. Moreover, the binary logistic regression analysis showed significant association between sex and the presence of TMJ effusion, exhibiting an Odds Ratio of 5.168 for females (p = 0.008).
UNASSIGNED: 2D qualitative evaluation was as effective as 3D quantitative assessment for TMJ effusion diagnosis. No significant associations were found between TMJ effusion and TMJ pain, disc displacement or jaw function limitation. However, it was suggested that female patients suffering from TMD may be at a risk for TMJ effusion. Further prospective research is needed for validation.

BACKGROUND: Odontogenic maxillary sinusitis (OMS) is widely acknowledged in both the dentistry and otolaryngology fields. Recently, iatrogenic odontogenic maxillary sinusitis cases can be encountered frequently. The purpose of this study was to evaluate the effect of intraoral sinus irrigation using the small lateral window approach in patients with odontogenic maxillary sinusitis by comparing pre- and postoperative volumetric measurement of CBCT and symptoms. We surveyed 21 patients who visited the Oral and Maxillofacial Surgery Department at PNUDH from 2016 to 2022. All the patients\' information was extracted from an electronic database. The patients with a follow-up period of 2 months or more were included. The three-dimensional volumetric measurement was performed using the ImageJ program (National Institute of Health, University of Wisconsin).
RESULTS: Among 21 patients, 16 (76.1%) were male, and 5 (23%) were female. The most common type of surgery was general anesthesia (16 cases) in which oroantral fistula was present in 7 cases. In the causes of maxillary sinusitis, there were seven implant-related patients, five patients of tooth extraction, seven patients of bone grafting, and two patients in other groups. Radiographic opacity decreased by 40.15% after sinus irrigation especially in bone graft and tooth extraction cases. Clinically, symptoms improved in 17 patients (80.9%).
CONCLUSIONS: By this study, it can be concluded that maxillary sinus irrigation using the small lateral window approach is a clinically and radiologically effective treatment method for odontogenic maxillary sinusitis.

UNASSIGNED: Distal radioulnar joint (DRUJ) injuries can be devastating and challenging to manage. The multiplanar curvature exhibited by the ulna impacts the morphology of the DRUJ, making it difficult to assess through two-dimensional radiographs alone. We used full-length, three-dimensional (3D) computed tomography angiography scans to assess the relationship between ulnar bowing, DRUJ ulnar variance (UV), and sigmoid notch angle. The goal of this study was to establish normal anatomic ranges for these landmarks to improve treatment for forearm traumas and DRUJ pathologies.
UNASSIGNED: Eighty-two intact upper extremity computed tomography angiography scans were examined and reconstructed into 3D models. We characterized ulnar bowing and DRUJ metrics using computer-aided design software. Measures of central tendency and Pearson correlation coefficients were calculated for comparative analysis.
UNASSIGNED: The study yielded an average ulnar length of 272.3 mm. We identified the proximal ulnar bow at 36.7% of the bone\'s total length, possessing a depth of 10.3 mm, a proximal angle of 6.6°, and a distal angle of 3.9°. The distal ulnar bow appeared at 75.3% of the bone\'s length, characterized by a depth of 4.2 mm, a proximal angle of 2°, and a distal angle of 4.3°. In the coronal plane, the proximal angle of the proximal ulnar bow correlated positively with UV (r = 0.39, P < .001), whereas the distal angle of the distal ulnar bow correlated negatively (r = -0.48, P < .001). We also found significant correlations between the depths of both proximal and distal bows with UV (r = 0.38, P < .001; r = -0.34, P < .001, respectively). Moreover, UV within the DRUJ strongly correlated with the sigmoid notch angle (r = -0.77, P = .01). In contrast, the sagittal plane metrics did not show meaningful correlations with UV.
UNASSIGNED: Sagittal alignment and translation at the DRUJ articulation are directly related to ulna bowing at the distal ulna. A nuanced understanding of these 3D relationships can enhance preoperative planning when correcting ulnar-side pathology.
UNASSIGNED: Therapeutic IV.

BACKGROUND: Measurements of knee cartilage thickness derived from MR images are attractive biomarkers for osteoarthritis research. Although some cross-sectional multivendor studies exist, none have employed fully automatic three-dimensional MRI analysis. Our objective was to evaluate the variations in knee cartilage thickness measurements obtained using automated methods and MRI instruments from five different vendors.
METHODS: The subjects were 10 healthy volunteers aged 22-60 years. MRI models with 3 Tesla strength from five different companies were used. Cartilage thickness was quantified fully automatically for seven regions. We hypothesized that \"the MRI model influences cartilage thickness measurements.\" Inter-measurement error, defined as the absolute difference between the targeted and median thicknesses determined by the five MRI models, was analyzed using histograms. The factors generating the largest inter-measurement error were also examined.
RESULTS: No exceptional trends attributable to a specific instrument model were observed, and the p-value from the Kruskal-Wallis test exceeded 0.05 in all seven regions. Therefore, the study hypothesis was rejected. Of the 350 measurements, the inter-measurement error was ≤0.05 mm in 53 %, ≤0.10 mm in 75 %, and ≤0.20 mm in 95 %. Analysis of the medial tibial cartilage, which had the largest inter-measurement error, revealed mis-extraction of synovial fluid as cartilage.
CONCLUSIONS: The choice of MRI model did not influence cartilage thickness measurements. Overall, 95 % of the inter-measurement errors were within 0.20 mm. The greatest error resulted from mis-extracting synovial fluid as cartilage.

OBJECTIVE: To three-dimensionally assess differences in craniomaxillofacial skeletal development in patients with operated unilateral cleft lip and palate (UCLP) treated with/without presurgical nasoalveolar molding (PNAM) with a mean age of 5 years.
METHODS: Cone-beam CT radiographs of 30 patients with UCLP who had undergone PNAM and 34 patients with UCLP who did not receive PNAM were analyzed. The data were stored in DICOM file format and were imported into the Dolphin Imaging program for 3D image reconstruction and landmark identification. 33 landmarks, 17 linear and three angular variables representing craniofacial morphology were analyzed and compared by using the Mann-Whitney U tests.
RESULTS: The vast majority of linear variables and 3D coordinates of landmark points reflecting craniofacial skeletal symmetry were not significantly different between the two groups. In terms of craniofacial skeletal development, the PNAM group had a significantly smaller anterior nasal spine offset in the midsagittal plane and a greater maxillary length compared to the non-PNAM group.
CONCLUSIONS: Evaluations performed in early childhood showed that treatment with/without PNAM in the neonatal period was not a major factor influencing craniomaxillofacial hard tissue development in patients with UCLP; moreover, PNAM treatment showed significant correction of skeletal deviation at the base of the nose.
CONCLUSIONS: Follow-up in early childhood has shown that PNAM treatment administered during the neonatal stage does not impede maxillary development and has benefits in correcting nasal floor deviation. It is a viable option for improving nasal deformity in children with unilateral cleft lip and palate.

OBJECTIVE: Three-dimensional (3D) capacity for remodelling in cubitus varus deformity (CVD) after paediatric supracondylar humeral fractures (PSHFs) remains unelucidated. This study investigated remodelling patterns after PSHFs by examining 3D deformity distribution over time after injury.
METHODS: Computed tomography (CT) data of 86 patients with CVD after PSHFs were analysed. The 3D deformity angles in the sagittal, coronal, and axial directions were assessed and correlated with the duration between the age at injury and CT evaluation. For the subgroup analysis, we performed the same correlation analysis in a younger (< 8 years old) and an older group (≥ 8 years old); we categorized the duration into early (< 2 years), middle (≥ 2 to < 5 years), and late periods (≥ 5 years) and compared the deformity angles of each direction among the three groups.
RESULTS: Sagittal deformity showed a moderate correlation with the duration of deformity (r = -0.54; P < 0.001), while coronal and axial deformities showed a negligible correlation. Sagittal deformity showed moderate correlations with the duration in the younger group (r = -0.62; P < 0.001) and weak correlations in the older group (r = -0.37; P = 0.091). In the sagittal direction, the deformity angle in the early period was significantly larger than those in the mid and late periods (P < 0.001). However, there were no significant differences among the three groups in the coronal and axial directions.
CONCLUSIONS: Sagittal deformities in CVDs are capable of remodelling, especially in the early period and at a younger age, whereas coronal and axial deformities are less likely to undergo remodelling.