As a toxic Volatile Organic Pollutant (TVOC), formaldehyde has a toxic effect on microorganisms, consequently inhibiting the biochemical process of formaldehyde wastewater treatment. Therefore, the selective degradation of formaldehyde is of great significance in achieving high-efficiency and low-cost formaldehyde wastewater treatment. This study constructed a heterogeneous Fe-ZSM-5/H2O2 Fenton system f or the selective degradation of target compounds. By immobilizing Fe3+ onto the surface of a ZSM-5 molecular sieve, Fe-ZSM-5 was prepared successfully. XRD, BET and FT-IR spectral studies showed that Fe-ZSM-5 was mainly composed of micropores. The influences of different variables on formaldehyde-selective heterogeneous Fenton degradation performance were studied. The 93.7% formaldehyde degradation and 98.2% selectivity of formaldehyde compared with glucose were demonstrated in the optimized Fenton system after 360 min. Notably, the resultant selective Fenton oxidation system had a wide range of pH suitability, from 3.0 to 10.0. Also, the Fe-ZSM-5 was used in five consecutive cycles without a significant drop in formaldehyde degradation efficiency. The use of reactive oxygen species scavengers indicated that the hydroxyl radical was the primary active species responsible for degrading formaldehyde. Furthermore, great degradation performance was acquired with high concentrations of formaldehyde for this system, and the degradation efficiency was more than 95.0%.

Photothermolysis is the process that converts radiation energy into thermal energy, which results in the destruction of surrounding tissues or cells through thermal diffusion. Laser therapy that is based on photothermolysis has been a widely used treatment for various skin diseases such as skin cancers and port-wine stains. It offers several benefits such as non-invasiveness and selective treatment. However, the use of light, e.g., laser, for safe and effective photothermolysis becomes challenging due to the limited penetration of light into skin tissue as well as the presence of melanin, which absorbs this light. To solve the current issues, we propose an optical microneedle-lens array (OMLA) coated with gold in this work to directly deliver light to targeted skin layers without being absorbed by surrounding tissues as well as melanin, which results in the improvement of the efficiency of photothermal therapy. We developed a novel fabrication method, frame-guided micromolding, to prepare the OMLA by assembling two negative molds with simultaneous alignment. In addition, evaluations of the optical and heat transfer characteristics of the OMLA were performed. We expect our developed OMLA to play a crucial role in realizing more effective laser therapy by allowing the precise delivery of photons to the target area.

Hemicellulose can be selectively removed by acid pretreatment. In this study, selective removal of hemicellulose was achieved using dilute sulfuric acid assisted by aluminum sulfate pretreatment. The optimal pretreatment conditions were 160 °C, 1.5 wt% aluminum sulfate, 0.7 wt% dilute sulfuric acid, and 40 min. A component analysis showed that the removal rate of hemicellulose and lignin reached 98.05% and 9.01%, respectively, which indicated that hemicellulose was removed with high selectivity by dilute sulfuric acid assisted by aluminum sulfate pretreatment. Structural characterizations (SEM, FTIR, BET, TGA, and XRD) showed that pretreatment changed the roughness, crystallinity, pore size, and functional groups of corn straw, which was beneficial to improve the efficiency of enzymatic hydrolysis. This study provides a new approach for the high-selectivity separation of hemicellulose, thereby offering novel insights for its subsequent high-value utilization.

Sclerostin is a secreted glycoprotein that expresses predominantly in osteocytes and inhibits bone formation by antagonizing the Wnt/β-catenin signaling pathway, and the loop3 region of sclerostin has recently discovered as a novel therapeutic target for bone anabolic treatment without increasing cardiovascular risk. Herein, we used a structural based virtual screening to search for small molecular inhibitors selectively targeting sclerostin loop3. A novel natural product hit ZINC4228235 (THFA) was identified as the sclerostin loop3-selective inhibitor with a Kd value of 42.43 nM against sclerostin loop3. The simplification and derivation of THFA using molecular modeling-guided modification allowed the discovery of an effective and loop3-selective small molecular inhibitor, compound (4-(3-acetamidoprop-1-yn-1-yl)benzoyl)glycine (AACA), with improved binding affinity (Kd = 15.4 nM) compared to the hit THFA. Further in-vitro experiment revealed that compound AACA could attenuate the suppressive effect of transfected sclerostin on Wnt signaling and bone formation. These results make AACA as a potential candidate for development of anti-osteoporosis agents without increasing cardiovascular risk.

Proteins are known to perform an astonishing array of functions thanks to their ability to cooperate and modulate each other\'s properties. Inside cells, proteins can assemble into large multi-subunit complexes to carry out complex cellular functions. The correct assembly and maintenance of the functional state of macromolecular protein complexes is crucial for human health. Failure to do so leads to loss of function and potential accumulation of harmful materials, which is associated with a variety of human diseases such as neurodegeneration and cancer. Autophagy engulfs cytosolic material in autophagosomes, and therefore is best suited to eliminate intact macromolecular complexes without disassembling them, which could interfere with de novo assembly. In this review, we discuss the role of autophagy in the selective degradation of macromolecular complexes. We highlight the current state of knowledge for different macromolecular complexes and their selective autophagic degradation. We emphasize the gaps in our understanding of what it takes for these large macromolecular complexes to be degraded and point to future work that may shed light on the regulation of the selective degradation of macromolecular complexes by autophagy.

BACKGROUND: This study evaluated the efficacy of the selective personality-targeted PreVenture program in reducing cannabis and stimulant use over a 7-year period spanning adolescence and early adulthood.
METHODS: A cluster randomized controlled trial was conducted in 14 Australian schools. Schools were randomized to PreVenture, a brief personality-targeted selective intervention, comprising two 90-minute facilitator-led sessions delivered one week apart, or a control group (health education as usual). Only students who scored highly on one of four personality traits (anxiety sensitivity, negative thinking, impulsivity, sensation seeking) were included. Students completed online self-report questionnaires between 2012 and 2019: at baseline; post-intervention; 1-, 2-, 3-, 5.5- and 7-years post-baseline. Outcomes were past 6-months cannabis use, stimulant use (MDMA, methamphetamine or amphetamine) and cannabis-related harms.
RESULTS: The sample comprised 438 adolescents (Mage=13.4 years; SD=0.47) at baseline. Retention ranged from 51% to 79% over the 7-years. Compared to controls, the PreVenture group had significantly reduced odds of annual cannabis-related harms (OR=0.78, 95% CI=0.65-0.92). However, there were no significant group differences in the growth of cannabis use (OR=0.84, 95% CI=0.69-1.02) or stimulant use (OR=1.07, 95% CI=0.91-1.25) over the 7-year period.
CONCLUSIONS: PreVenture was effective in slowing the growth of cannabis-related harms over time, however owing to missing data over the 7-year trial, replication trials may be warranted to better understand the impact of the PreVenture intervention on cannabis and stimulant use among young Australians. Alternative implementation strategies, such as delivering the intervention in later adolescence and/or providing booster sessions, may be beneficial.

The recovery of spent lithium-ion batteries by traditional acid leaching is limited by serious pollution, complicated technology, and the low purity of Li2CO3. To address the problems of the traditional acid leaching process and increasing demand for decarbonization, a technique for the selective carbonation leaching of Li and the recovery of battery-grade Li2CO3 by a simple concentration precipitation process without acids or bases was developed. The coupling of CO2 and reducing agents could effectively promote the precipitation of MCO3 (M=Ni/Co/Mn) and the selective leaching of Li by decreasing the reducing capability needed for transition metals and decreasing the pH of the solution. The optimal selective leaching process of Li was obtained under 1 MPa CO2 with 20 g/L Na2S2O3 at an L/S ratio of 30 mL/g for 1.5 h. FT-IR, XRD, ICP-MS and other methods were used to reveal the multiphase interfacial reaction mechanism of the carbonation reduction of layered cathode materials, which indicated that the reducing agent Na2S2O3 could promote lattice distortion of the cathode materials and effective separation of Li. In summary, a green and economical method for the selective recovery of battery-grade Li2CO3 using a one-step method of CO2 carbonation recovery in a near-neutral environment was proposed.

BACKGROUND: Practicing and assessment of selective caries removal techniques in dental students remain challenges in many dental schools. The aim of this study was to utilize a 3D assessment technique, within a designated acceptable range of deviation, to evaluate the tendency of dental students in performing selective caries removal (SCR). The correlation between 3D assessment results and the conventional rubric rated by an instructor was also determined.
METHODS: Fifth-year dental students (n = 61) performed the SCR task on 3D-printed teeth containing simulated deep caries lesions in occlusal and proximal surfaces. One instructor assessed the results using a conventional analytic rubric. The excavated teeth were additionally evaluated using 3D analysis software with the designated acceptable range of deviations (± 0.5 mm) from the standard cavities. The average root mean square (RMS) value, representing the deviation between student-prepared cavities and the predefined standard cavities, was recorded. A tendency towards over-excavation was defined for RMS values > 0.5 mm, and towards under-excavation for RMS values < 0.5 mm.
RESULTS: The mean (min-max) of RMS was 0.27 (0.18-0.40) for occlusal and 0.29 (0.20-0.57)for proximal cavities. A tendency of dental students toward over-excavation was observed in both occlusal (74%) and proximal cavities (87%). There was a moderate negative correlation between the RMS values and the traditional rubric scores for both occlusal (R2 = 0.148, P = 0.002) and proximal cavities (R2 = 0.107, P = 0.010).
CONCLUSIONS: The 3D evaluation technique effectively revealed specific tendencies in dental students\' caries removal skills. The integration of computerized assessments with traditional methods could potentially assist the instructors in delivering more objective and specific feedback to students. Further research is encouraged to investigate the impact of this assessment technique on improving student performance in selective caries removal skills.

Biochar materials have shown great potential for broad catalytic application. However, using these materials in the capacitive deionization technology (CDI) system for heavy metal removal still faces a significant challenge due to their low specific capacity and removal capability. Here, a comprehensive regulation on the interfacial/bulk electrochemistry of biochar by Zn doping is reported, which suggests a high renewable capacity (20 mg g-1) and outstanding selective capacitive removal ability (SCR) of Pb2+ from leachate. The SCR efficiency of Pb2+ is as high as 99% compared to K+ (8%), Na+ (13%), and Cd2+ (37%). This work proves that the doped Zn on the biochar can combine with OH- generated by water splitting to form M─OH bonds, which is beneficial for improving the specific capacity. Significantly, the relationship between double-layer capacitance and pseudo-capacitance can also be optimized by regulating the content of Zn, leading to different removal abilities of heavy metals. Therefore, this work offers insights into charge-storage kinetics, which provide valuable guidelines for designing and optimizing the biochar electrode for broader environmental applications.

BACKGROUND: Gastric variceal hemorrhage is one of the primary manifestations of left-sided portal hypertension (LSPH). The hemorrhage is fatal and requires safe and effective interventions.
OBJECTIVE: To evaluate the clinical safety and efficacy of modified endoscopic ultrasound (EUS)-guided selective N-butyl-2-cyanoacrylate (NBC) injections for gastric variceal hemorrhage in LSPH.
METHODS: A retrospective observational study of patients with LSPH-induced gastric variceal hemorrhage was conducted. Preoperative EUS evaluations were performed. Enrolled patients were divided into modified and conventional groups according to the NBC injection technique. The final selection of NBC injection technique depended on the patients\' preferences and clinical status. The technical and clinical success rates, operation time, NBC doses, perioperative complications, postoperative hospital stay, and recurrent bleeding rates were analyzed, respectively.
RESULTS: A total of 27 patients were enrolled. No statistically significant differences were observed between the two groups regarding baseline characteristics. In comparison to patients in the conventional group, patients in the modified group demonstrated significantly reduced NBC doses (2.0 ± 0.6 mL vs 3.1 ± 1.0 mL; P = 0.004) and increased endoscopic operation time (71.9 ± 11.9 min vs 22.5 ± 6.7 min; P < 0.001). Meanwhile, the two groups had no significant difference in the technical and clinical success rates, perioperative complications, postoperative hospital stay, and recurrent bleeding rates.
CONCLUSIONS: Modified EUS-guided selective NBC injections demonstrated safety and efficacy for LSPH-induced gastric variceal hemorrhage, with advantages of reduced injection dose and no radiation risk. Drawbacks were time consumption and technical challenge.