BACKGROUND: Odontogenic fibromyxoma (OFM) is a round and locally invasive neoplasm predominantly seen in the mandible. Though radiographic appearance is variable, definitive diagnosis is based on correlation with histopathological examination. Surgical approach is the treatment of choice. For reconstruction, patient-specific implant (PSI) has lately been developed as a crucial help.
METHODS: This case report presents a 19 year old female patient with odontogenic fibromyxoma highlighting its clinical, radiographic, histopathological features along with rehabilitation using patient specific implants reducing the complexity and related morbidities of reconstructive procedures.
CONCLUSIONS: Surgical repair and reconstruction of defects in cranio-maxillofacial region is challenging. The described treatment eliminates the need for bone grafting, shows optimal results owing to the shorter rehabilitation time and more accurate fits.
CONCLUSIONS: This report introduces a novel technique whereby patient-specific implants are employed as the primary method of reconstruction following segmental resection.

An 11-year-old girl presented at the emergency service with a nasal defect caused by a dog bite in the midface. Autologous nose reconstruction in the pediatric population is challenging due to donor site morbidity and remaining facial growth. Temporary prosthetic treatment is difficult to accept due to problems with retention. We present an innovative solution using a 3D printed patient specific titanium implant for support of a nasal prosthesis. With preoperative 3-dimensional planning, the implant can be designed to find fixation in the areas with the best bone quality, avoid potential damage to tooth buds and dental roots and avoid interference to soft tissues such as the nasal septum. Clear communication between the anaplastologist, surgeon and medical engineer is crucial for treatment success. The impact of facial growth is still unclear and will have to be assessed.

UNASSIGNED: To suggest a directing algorithm for rehabilitative management of complex soft and hard tissue defects due to mucormycosis.
UNASSIGNED: An utmost need for surgical, reconstructive and rehabilitative options; functional, aesthetic, acceptable to the patient and enduring rehabilitation.
UNASSIGNED: Different cases of rhinomaxillary mucormycosis pertaining to the facial skeleton, diagnosed with the help of radiographic as well as fungal cultures.
UNASSIGNED: Thorough medical assessment, and antifungal prescription; followed by surgical resection of the affected areas, rigorous follow-up scheme and later rehabilitation with the help of implants and immediate loading.
UNASSIGNED: Regular follow-ups for at least one year and successful rehabilitation providing acceptable functional outcomes.
UNASSIGNED: Unconventional pathologies like rhinomaxillary mucormycosis infecting the jaws require novel, unprecedented and elaborate procedures both surgical and reconstructive based on sound scientific principles. There must be a vision for the rehabilitation of such cases right from the commencement of the surgical treatment.

To compare the reconstruction of orbital fractures using patient-specific implants (PSI) and conventional pre-formed titanium mesh; to develop a method of three-dimensional (3D) superimposition and analysis of the reconstructed orbits; and to present the pitfalls in 3D planning of orbital PSI and how to avoid them. This was a retrospective study of patients with orbital fractures who were treated in our institution between the years 2022 and 2023 using PSI or conservative prefabricated titanium mesh. Three different methods for virtual reconstruction of orbital fractures were used and are detailed with advantages, disadvantages and indications. Data acquired included age, gender, method of reconstruction, functional outcomes and aesthetic outcomes. 3D analysis for accuracy of reconstruction was performed. A total of 23 patients were included; 12 were treated using PSI and 11 using prefabricated titanium meshes. There were 8 male and 4 female patients in the PSI group comparted to 5 and 6 in the prefabricated group. All three virtual methods for reconstruction were used successfully, each with the proper indications. When comparing PSI reconstruction to conventional mesh, a significant difference in accuracy was observed; PSI cases showed an inaccuracy of 0.58 mm compared to 1.54 mm with the conventional method. Complications are presented, and tips for avoiding them are detailed. Three different methods for virtual reconstruction were used successfully; automated computerized reconstruction is used for small defects, repositioning is the superior method for non-comminuted cases while mirroring is the method of choice in comminuted fractures. 3D analysis can be performed using a novel method detailed in this report. PSI reconstruction showed superior results, indicating it should be the method of choice when possible. Pitfalls are presented and approaches to prevent them are discussed. Orbital reconstruction is a very important entity in maxillofacial surgery with crucial functional and esthetical implications, and one should use virtual planning and PSI implants, as they significantly improve outcomes.

OBJECTIVE: Focal chondral lesions of the femur are currently treated with biological repair or arthroplasty. However, some patients are not suitable for either one due to lesion size, age, or prior biological treatment attempts. While singular patient-specific focal mini metal implants already showed good results, the outcomes of bicompartmental implantation of these implants have not been discussed in the literature yet. This study aims to evaluate clinical outcomes of patients who underwent bicompartmental implantation of two patient-specific implants.
METHODS: This prospective, non-randomized, non-comparative pilot study evaluates results up to two years after bicompartmental implantation of two implants (Episealer Implant, Episurf, Stockholm, Sweden). A damage report is compiled using a special MRI program and patient specific implants are manufactured, including 3D-printed surgical instruments to provide exact placement of the implant. The patients were assessed repeatedly using the Knee Injury and Osteoarthritis Outcome Score (KOOS) and Visual Analogue Scale (VAS) for pain during the follow-up.
RESULTS: The scores were evaluated three, 12, and 24 months after surgery and showed good results. The median in both scores improved from 37.7 for the KOOS5 preoperatively to 69.1 after 24 months and from 69 for the VAS for pain preoperatively to 9 after 24 months.
CONCLUSIONS: Overall, for the small study group presented, the early results are promising. With noticeable improvement in KOOS and VAS for pain after two years, patient specific implants appear to become relevant in future standardized treatment of femoral chondral lesions. Especially with bicompartmental implantation, full arthroplasty can be delayed even further.
METHODS: IV.

Patient specific implants (PSI) though considered the next frontier in Maxillofacial Reconstruction, the gold standard for Brown I, II maxillary defects still remains autogenous reconstruction. The authors in their previous papers have standardised the design of Patient Specific Implants for Brown I, II mandibular defects. In this paper they attempt to standardise the design of PSI for Brown I,II maxillary defects using a scientifically optimised design which has passed through a stringent set of parameters. They aim to address the complications like wound dehiscence, poor dimensional accuracy and unoptimised biomechanics due to lack of standardisation thus impeding it\'s widespread acceptance among the scientific community. This study presents an eight step checklist to be followed for designing of an ideal standardised patient specific implant and can serve as a go-to guide for the operating and designing team.

Silent sinus syndrome is a rare disorder characterized by ipsilateral enophthalmos and hypoglobus following a collapse of the orbital floor, in the presence of asymptomatic long-term maxillary sinusitis. It results in enophthalmos, hypoglobus and deepening of the superior palpebral sulcus. A standardized treatment protocol for this infrequent syndrome has not yet been established. The management includes restoration of maxillary sinus ventilation with functional endoscopic sinus surgery and orbital reconstruction, either concurrently or separately. In this paper, the authors presented two patients successfully treated with patient-specific implants, and intraoperative navigation. These cases highlight the benefit of computer-assisted planning and titanium patient-specific implants in the management of silent sinus syndrome. To the best of our knowledge, this is the first report that described the use of PSI with titanium spacers performed with the aid of intraoperative navigation for SSS treatment. Advantages, drawbacks of this technique and treatment alternatives currently available in the literature were also discussed.

UNASSIGNED: During second wave of COVID pandemic, India faced heavy surge of mucormycosis. Treatment option for these patients included either total or partial maxillectomy with primary closure. Rehabilitation of these patients became challenging because of their age and size of defect. The purpose of the present study is to present a new digital technique for the fabrication of patient-specific zygoma implants (PSI) and to report on its survival and complication rates.
UNASSIGNED: Total 21 patients who had undergone either partial or total maxillectomy after mucormycosis and who were disease-free clinically and radiographically for 6 or more months post-resection were rehabilitated using patient-specific zygoma implant. CT scan was obtained for all patients post-maxillectomy for evaluation of existing bone condition. Exocad software was used for virtual surgical planning of zygoma implant considering surgical and prosthetic technicality to achieve goal of maximum functionality and sustainability.
UNASSIGNED: All the patients were followed up after 15, 30, 45 and 90 days and there after every month for evaluation of soft tissue healing, infection, dehiscence, loosening of prosthesis, eating efficiency and aesthetic. Follow-up period for all 15 patients was in the range of 6-12 months.
UNASSIGNED: In case of post-mucor maxillectomy patients, use of PSI offers the advantages of minimal bone augmentation, reduction in time required to restore lost function, and reduced financial burden of multiple procedures. Therefore, PSI may represent a valid alternative treatment for the prosthetic restoration of post-mucor maxillectomy patients.

Reverse Total Shoulder Arthroplasty is being increasingly performed, with indications in both elective and trauma settings. Accordingly, there are an increasing number of revision cases where glenoid bone loss is a concern. There are well recognised surgical techniques for dealing with mild to moderate glenoid wear, including eccentric reaming and impaction grafting. In cases of severe wear or uncontained glenoid defects these may not be suitable, and the surgeon may look to a customised implant to deal with such bone loss. There are several implant manufacturers who currently market and produce patient specific instrumentation and customised glenoid baseplates to achieve the best possible fixation in cases of severe bone loss. This article outlines some examples of custom implants currently available to surgeons, and the process by which they may be procured and used. Implant and surgical considerations, and key aspects of surgical technique are also covered. Literature on outcomes and complications following custom shoulder arthroplasty shows promising results, but at present is limited to relatively small case series with no long-term outcome data.

This report describes the surgical reconstruction of large maxillofacial defect caused by a short-range gunshot injury in a dog using titanium patient-specific implant (PSI). A 3-year-old male Wolf Shepherd was admitted for a large right facial defect with right nasal cavity exposure caused by a gunshot injury. Radiographic examination revealed severe loss of the right maxillary, nasal, and incisive bones, multiple fractures of both left and right palatine bones, and a comminuted fracture of the right mandible. Initial surgical procedure included computed tomography (CT) imaging for three-dimensional (3D) implant design. Open wound management was maintained for 18 days until the fresh granulation tissue fully covered the wound bed. The implant was designed in a \"hand grasping shape\" to cover the defect, align multiple fractured palatine bones, and make a snap fit function. Multiple holes, including cortical screw holes, were added to the final design. The implant was printed on a titanium alloy. Surgical application of titanium PSI was performed 19 days after the primary surgery. A free sublingual mucosal graft was used to reconstruct the mucosal layer of the right nasal cavity. The mucosa was then covered with collagen membrane to strengthen the structure of the nasal cavity. Blunt dissection of the hard palate mucoperiosteum above the palatine process and palatine bones, soft tissue above the maxilla was performed, and the 3D printed titanium implant was fastened in a preplanned position. The facial soft tissue defect was reconstructed, and the titanium PSI was covered using an angularis oris cutaneous flap. Partial flap necrosis occurred in the rostral aspect, and the wound was managed to heal by a second intension. Flap dehiscence at the junction of the flap and hard palate mucoperiosteum occurred with exposure of the implant 2 days postoperatively. Multiple attempts to close the defect failed, and the owner wanted to stop treatment. Healthy granulated tissue was observed proximal to the implant. The defect no longer increased in size and did not show any noticeable complications related to the defect at 60 days after titanium PSI application, and the dog was discharged. Six months post-operatively, the dog remained active with great appetite, gained weight, and showed acceptable facial symmetry without enlargement of the implant exposure or any implant-related problems.