BACKGROUND: Odontogenic fibromyxoma (OFM) is a round and locally invasive neoplasm predominantly seen in the mandible. Though radiographic appearance is variable, definitive diagnosis is based on correlation with histopathological examination. Surgical approach is the treatment of choice. For reconstruction, patient-specific implant (PSI) has lately been developed as a crucial help.
METHODS: This case report presents a 19 year old female patient with odontogenic fibromyxoma highlighting its clinical, radiographic, histopathological features along with rehabilitation using patient specific implants reducing the complexity and related morbidities of reconstructive procedures.
CONCLUSIONS: Surgical repair and reconstruction of defects in cranio-maxillofacial region is challenging. The described treatment eliminates the need for bone grafting, shows optimal results owing to the shorter rehabilitation time and more accurate fits.
CONCLUSIONS: This report introduces a novel technique whereby patient-specific implants are employed as the primary method of reconstruction following segmental resection.

To compare the reconstruction of orbital fractures using patient-specific implants (PSI) and conventional pre-formed titanium mesh; to develop a method of three-dimensional (3D) superimposition and analysis of the reconstructed orbits; and to present the pitfalls in 3D planning of orbital PSI and how to avoid them. This was a retrospective study of patients with orbital fractures who were treated in our institution between the years 2022 and 2023 using PSI or conservative prefabricated titanium mesh. Three different methods for virtual reconstruction of orbital fractures were used and are detailed with advantages, disadvantages and indications. Data acquired included age, gender, method of reconstruction, functional outcomes and aesthetic outcomes. 3D analysis for accuracy of reconstruction was performed. A total of 23 patients were included; 12 were treated using PSI and 11 using prefabricated titanium meshes. There were 8 male and 4 female patients in the PSI group comparted to 5 and 6 in the prefabricated group. All three virtual methods for reconstruction were used successfully, each with the proper indications. When comparing PSI reconstruction to conventional mesh, a significant difference in accuracy was observed; PSI cases showed an inaccuracy of 0.58 mm compared to 1.54 mm with the conventional method. Complications are presented, and tips for avoiding them are detailed. Three different methods for virtual reconstruction were used successfully; automated computerized reconstruction is used for small defects, repositioning is the superior method for non-comminuted cases while mirroring is the method of choice in comminuted fractures. 3D analysis can be performed using a novel method detailed in this report. PSI reconstruction showed superior results, indicating it should be the method of choice when possible. Pitfalls are presented and approaches to prevent them are discussed. Orbital reconstruction is a very important entity in maxillofacial surgery with crucial functional and esthetical implications, and one should use virtual planning and PSI implants, as they significantly improve outcomes.

OBJECTIVE: Focal chondral lesions of the femur are currently treated with biological repair or arthroplasty. However, some patients are not suitable for either one due to lesion size, age, or prior biological treatment attempts. While singular patient-specific focal mini metal implants already showed good results, the outcomes of bicompartmental implantation of these implants have not been discussed in the literature yet. This study aims to evaluate clinical outcomes of patients who underwent bicompartmental implantation of two patient-specific implants.
METHODS: This prospective, non-randomized, non-comparative pilot study evaluates results up to two years after bicompartmental implantation of two implants (Episealer Implant, Episurf, Stockholm, Sweden). A damage report is compiled using a special MRI program and patient specific implants are manufactured, including 3D-printed surgical instruments to provide exact placement of the implant. The patients were assessed repeatedly using the Knee Injury and Osteoarthritis Outcome Score (KOOS) and Visual Analogue Scale (VAS) for pain during the follow-up.
RESULTS: The scores were evaluated three, 12, and 24 months after surgery and showed good results. The median in both scores improved from 37.7 for the KOOS5 preoperatively to 69.1 after 24 months and from 69 for the VAS for pain preoperatively to 9 after 24 months.
CONCLUSIONS: Overall, for the small study group presented, the early results are promising. With noticeable improvement in KOOS and VAS for pain after two years, patient specific implants appear to become relevant in future standardized treatment of femoral chondral lesions. Especially with bicompartmental implantation, full arthroplasty can be delayed even further.
METHODS: IV.

Patient specific implants (PSI) though considered the next frontier in Maxillofacial Reconstruction, the gold standard for Brown I, II maxillary defects still remains autogenous reconstruction. The authors in their previous papers have standardised the design of Patient Specific Implants for Brown I, II mandibular defects. In this paper they attempt to standardise the design of PSI for Brown I,II maxillary defects using a scientifically optimised design which has passed through a stringent set of parameters. They aim to address the complications like wound dehiscence, poor dimensional accuracy and unoptimised biomechanics due to lack of standardisation thus impeding it\'s widespread acceptance among the scientific community. This study presents an eight step checklist to be followed for designing of an ideal standardised patient specific implant and can serve as a go-to guide for the operating and designing team.

Silent sinus syndrome is a rare disorder characterized by ipsilateral enophthalmos and hypoglobus following a collapse of the orbital floor, in the presence of asymptomatic long-term maxillary sinusitis. It results in enophthalmos, hypoglobus and deepening of the superior palpebral sulcus. A standardized treatment protocol for this infrequent syndrome has not yet been established. The management includes restoration of maxillary sinus ventilation with functional endoscopic sinus surgery and orbital reconstruction, either concurrently or separately. In this paper, the authors presented two patients successfully treated with patient-specific implants, and intraoperative navigation. These cases highlight the benefit of computer-assisted planning and titanium patient-specific implants in the management of silent sinus syndrome. To the best of our knowledge, this is the first report that described the use of PSI with titanium spacers performed with the aid of intraoperative navigation for SSS treatment. Advantages, drawbacks of this technique and treatment alternatives currently available in the literature were also discussed.

UNASSIGNED: During second wave of COVID pandemic, India faced heavy surge of mucormycosis. Treatment option for these patients included either total or partial maxillectomy with primary closure. Rehabilitation of these patients became challenging because of their age and size of defect. The purpose of the present study is to present a new digital technique for the fabrication of patient-specific zygoma implants (PSI) and to report on its survival and complication rates.
UNASSIGNED: Total 21 patients who had undergone either partial or total maxillectomy after mucormycosis and who were disease-free clinically and radiographically for 6 or more months post-resection were rehabilitated using patient-specific zygoma implant. CT scan was obtained for all patients post-maxillectomy for evaluation of existing bone condition. Exocad software was used for virtual surgical planning of zygoma implant considering surgical and prosthetic technicality to achieve goal of maximum functionality and sustainability.
UNASSIGNED: All the patients were followed up after 15, 30, 45 and 90 days and there after every month for evaluation of soft tissue healing, infection, dehiscence, loosening of prosthesis, eating efficiency and aesthetic. Follow-up period for all 15 patients was in the range of 6-12 months.
UNASSIGNED: In case of post-mucor maxillectomy patients, use of PSI offers the advantages of minimal bone augmentation, reduction in time required to restore lost function, and reduced financial burden of multiple procedures. Therefore, PSI may represent a valid alternative treatment for the prosthetic restoration of post-mucor maxillectomy patients.

Reverse Total Shoulder Arthroplasty is being increasingly performed, with indications in both elective and trauma settings. Accordingly, there are an increasing number of revision cases where glenoid bone loss is a concern. There are well recognised surgical techniques for dealing with mild to moderate glenoid wear, including eccentric reaming and impaction grafting. In cases of severe wear or uncontained glenoid defects these may not be suitable, and the surgeon may look to a customised implant to deal with such bone loss. There are several implant manufacturers who currently market and produce patient specific instrumentation and customised glenoid baseplates to achieve the best possible fixation in cases of severe bone loss. This article outlines some examples of custom implants currently available to surgeons, and the process by which they may be procured and used. Implant and surgical considerations, and key aspects of surgical technique are also covered. Literature on outcomes and complications following custom shoulder arthroplasty shows promising results, but at present is limited to relatively small case series with no long-term outcome data.

Proper treatment of the two-wall fractured orbit is still controversial. Specifically, there is no consensus on the issue of the necessity of medial orbital wall repair. With anatomically critical structures at risk during the surgical approach, surgeons\' view on the necessity of medial orbital wall repair often is restricted and an aesthetically disturbing enophthalmos is more likely to be accepted. Therefore, treatment options range from leaving the medial wall without repair to reconstruction with autogenous tissue or alloplastic materials, which can lead to moderate to severe side effects. However, emerging technologies such as patient-specific implants (PSI) offer a reliable and anatomically correct reconstruction of the bony orbit. This study aimed to evaluate the outcome of full orbital reconstruction using PSIs compared to only orbital floor repair using PDS (bioresorbable polydioxanone) foils leaving the medial orbital wall untouched in traumatic two-wall orbital fractures. Of all patients treated at the University Hospital of Düsseldorf between 2017 and 2019 who suffered from traumatic orbital fracture, only patients with a two-wall orbital fracture involving both the orbital floor and the medial wall (n = 68) were included. Patients were treated either with a PSI (n = 35) or a PDS foil (n = 33). Primary outcome parameters were ophthalmological disturbances analyzed via clinical investigation and intra-orbital angles, volumes and implant position analyzed with radiological 3D-datasets. While a two-wall reconstruction using PSIs led to a significant improvement of the enophthalmos, the rate of postoperative enophthalmos was significantly increased in cases of only orbital floor repair with PDS foils. Radiologically, a significant reconstruction of the three-dimensional bony orbit succeeded with the simple use of PSIs leading to a significant reduction in the traumatically enlarged orbital volume. PSI also led to a significant reduction in the traumatically enlarged medial angle of the orbit. This was not the case for single-floor repair with PDS foil. The results of this study suggest that complex orbital fractures can be reconstructed at an even higher degree of accuracy with selective laser-melted PSIs than PDS foils. In order to achieve a true to original reconstruction of the bony orbit, surgical treatment of the medial orbital wall can be advocated for in the long term depending on the indication.

UNASSIGNED: Successful repair of the orbital skeleton restores function and cosmesis by normalizing globe position and allowing full motility of the extraocular muscles. Routine repairs are successful with standard implants. However, defects that are irregular or cause volume deficiency can be challenging to repair. The development of patient specific implants (PSI) offers an additional tool in complex cases. Herein, we report our experience using PSI for orbital reconstruction.
UNASSIGNED: An IRB-approved review was conducted of consecutive patients who received PSI from 8/2016-9/2018. Demographic and examination findings were recorded. PSI was designed using high-density porous polyethylene or polyetheretherketone (PEEK) and implanted for repair. The postoperative course was reviewed for outcomes and complications.
UNASSIGNED: Eight patients were identified. Two had silent sinus syndrome, 3 were complex facial fracture revisions, and 3 were post-oncologic reconstruction. Seven received porous polyethylene implants, and 1 had a PEEK implant. Mean follow up time was 10.2 months (3.3-28.3). All had an improved functional and aesthetic result. Diplopia and enophthalmos completely resolved in 60% of fracture and silent sinus patients. All fracture and silent sinus patients were orthotropic without diplopia in primary gaze at last follow up. Tumor patients had improvement in symmetry and functionality. There were no complications.
UNASSIGNED: Complex orbital skeleton derangements can be difficult to repair and standard implants may incompletely resolve the anatomic problem. In challenging cases, PSI may better achieve an aesthetically and anatomically successful outcome and improve functionality.

OBJECTIVE: Patient-specific, flanged acetabular components are used for the treatment of Paprosky type III defects during revision total hip arthroplasty (THA). This monocentric retrospective cohort study analyzes the outcome of patients treated with custom made monoflanged acetabular components (CMACs) with intra- and extramedullary iliac fixation.
METHODS: 14 patients were included who underwent revision THA with CMACs for the treatment of Paprosky type III defects. Mechanism of THA failure was infection in 4 and aseptic loosening in 10 patients. Seven patients underwent no previous revision, the other seven patients underwent three or more previous revisions.
RESULTS: At a mean follow-up of 35.4 months (14-94), the revision rate of the implant was 28.3%. Additionally, one perioperative dislocation and one superficial wound infection occurred. At one year postoperatively, we found a significant improvement of the Western Ontario and McMaster Universities Arthritis Index (WOMAC) score (p = 0.015). Postoperative radiographic analysis revealed good hip joint reconstruction with a mean leg length discrepancy of 3 mm (-8-20), a mean lateralization of the horizontal hip center of rotation of 8 mm (-8-35), and a mean proximalization of the vertical hip center of rotation of 6 mm (13-26). Radiolucency lines were present in 30%.
CONCLUSIONS: CMACs can be considered an option for the treatment of acetabular bone loss in revision THA. Iliac intra- and extramedullary fixation allows soft tissue-adjusted hip joint reconstruction and improves hip function. However, failure rates are high, with periprosthetic infection being the main threat to successful outcome.