Silicon dioxide (SiO2), in its amorphous form, is an approved direct food additive in the United States and has been used as an anticaking agent in powdered food products and as a stabilizer in the production of beer. While SiO2 has been used in food for many years, there is limited information regarding its particle size and size distribution. In recent years, the use of SiO2 food additive has raised attention because of the possible presence of nanoparticles. Characterization of SiO2 food additive and understanding their physicochemical properties utilizing modern analytical tools are important in the safety evaluation of this additive. Herein, we present analytical techniques to characterize some SiO2 food additives, which were obtained directly from manufacturers and distributors. Characterization of these additives was performed using dynamic light scattering (DLS), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), and single-particle inductively coupled plasma mass spectrometry (spICP-MS) after the food additive materials underwent different experimental conditions. The data obtained from DLS, spICP-MS, and electron microscopy confirmed the presence of nanosized (1-100 nm) primary particles, as well as aggregates and agglomerates of aggregates with sizes greater than 100 nm. SEM images demonstrated that most of the SiO2 food additives procured from different distributors showed similar morphology. The results provide a foundation for evaluating the nanomaterial content of regulated food additives and will help the FDA address current knowledge gaps in analyzing nanosized particles in commercial food additives.

In today\'s era, nanoparticles (NPs) have become an integral part of human life, finding extensive applications in various fields of science, pharmacy, medicine, industry, electronics, and communication. The increasing popularity of NP usage worldwide is a testament to their tremendous potential. However, the widespread deployment of NPs unavoidably leads to their release into the environmental matrices, resulting in persistence in ecosystems and bioaccumulation in organisms. Understanding the environmental behavior of NPs poses a significant challenge due to their nanoscale size. Given the current environmental releases of NPs, known negative consequences, and the limited knowledge available for risk management, comprehending the toxicity of NPs in ecosystems is both awaiting and crucial. The present review aims to unravel the potential environmental influences of nano-scaled materials, and provides in-depth inferences of the current knowledge and understanding in this field. The review comprehensively summarizes the sources, fate, transport, toxicity, health risks, and remediation solutions associated with NP pollution in aquatic and soil ecosystems. Furthermore, it addresses the knowledge gaps and outlines further investigation priorities for the sustainable control of NP pollution in these environments. By gaining a holistic understanding of these aspects, we can work toward ensuring the responsible and sustainable use of NPs in today\'s fast-growing world.

Nanosized vaterite, which exhibits characteristics such as high specific surface area, porosity, and biocompatibility, has attracted research attention for use as a drug delivery material. However, fatal drawbacks such as high costs, difficulty in mass production, and toxicity exist in conventional nanosized vaterite production owing to the use of a large amount of organic solvents to forcibly suppress the vaterite recrystallization and particle growth. Therefore, nanosized 100 % vaterite was produced in this study via indirect carbonation without using any organic solvent, which has rarely been achieved previously. Seawater, sucrose, ultrasonication, and aging-which facilitate vaterite production and particle size reduction-exhibited a synergistic effect in producing vaterite. To realize nanosized vaterite production via indirect carbonation, seawater was used as a solvent, sucrose was added when Ca was eluted, and CO2 bubbling was performed under ultrasonication. Furthermore, the CaCO3-containing suspension obtained after the carbonation was aged. Ultrasonic waves were required to generate nanosized vaterite and reducing size at the carbonation stage. This nanosized-vaterite-production strategy involving organic-solvent-free indirect carbonation is meaningful, in that it highlights the potential of synthesizing vaterite in an economically sound, environmentally friendly manner for use as a pharmaceutical raw material.

The popularity of nanotechnology results from the possibility of obtaining materials that have better chemical, electrical, thermal, mechanical, or optical properties. Nano-sized materials are characterized by an increased surface area, which improves their chemical reactivity and mobility. Due to their enhanced reactivity and appropriately small size, some nanoparticles are used as antimicrobial and antifungal agents. Nanoparticles exhibit antimicrobial potential through multifaceted mechanisms. The adhesion of nanoparticles to microbial cells, and reactive oxygen species, and their penetration inside the cells, have been recognized as the most prominent modes of antimicrobial action. This review presents the mechanism of action of nanometals and oxide nanoparticles used as antimicrobials and the mechanisms of bacterial resistance to the toxic effects of nanoparticles. The article presents methods of forming microorganism resistance to the toxic effects of nanoparticles and the negative impact of nanoparticles on human health.

Organic-inorganic photocurable nanocomposite materials are a topic of intensive research nowadays. The wide variety of materials and flexibility of their characteristics provide more freedom to design optical elements for light and neutron optics and holographic sensors. We propose a new strategy of nanocomposite application for fabricating resonant waveguide structures (RWS), whose working principle is based on optical waveguide resonance. Due to their resonant properties, RWS can be used as active tunable filters, refractive index (RI) sensors, near-field enhancers for spectroscopy, non-linear optics, etc. Our original photocurable organic-inorganic nanocomposite was used as a material for RWS. Unlike known waveguide structures with corrugated surfaces, we investigated the waveguide gratings with the volume modulation of the RI fabricated by a holographic method that enables large-size structures with high homogeneity. In order to produce thin photosensitive waveguide layers for their subsequent holographic structuring, a special compression method was developed. The resonant and sensing properties of new resonant structures were experimentally examined. The volume waveguide gratings demonstrate narrow resonant peaks with a bandwidth less than 0.012 nm. The Q-factor exceeds 50,000. The sensor based on waveguide volume grating provides detection of a minimal RI change of 1 × 10-4 RIU. Here we also present the new theoretical model that is used for analysis and design of developed RWS. Based on the proposed model, fairly simple analytical relationships between the parameters characterizing the sensor were obtained.

Assembling nanosized building blocks into macroscopic 3D complex structures is challenging. Here, nanosized metal and semiconductor building blocks with a variety of sizes and shapes (spheres, stars, and rods) are successfully assembled into a broad range of hierarchical (nanometer to micrometer) assemblies of functional materials in centimeter size using butterfly wings as templates. This is achieved by the introduction of steric hindrance to the assembly process, which compensates for attraction from the environmentally sensitive hydrogen bonds and prevents the aggregation of nanosized building blocks. Of these materials, Au nanostar assemblies show a superior enhancement in surface-enhanced Raman scattering (SERS) performance (rhodamine 6G, 1506 cm-1 ) under 532, 633, and 780 nm excitation-this is 3.1-4.4, 3.6-3.9, and 2.9-47.3 folds surpassing Au nanosphere assemblies and commercial SERS substrates (Q-SERS), respectively. This method provides a versatile route for the assembly of various nanosized building blocks into different 3D superstructures and for the construction of hybrid nanomaterials and nanocomposites.

BACKGROUND: Metallic antibacterial nanoparticles have been shown to provide distinct antibacterial advantage and antibiofilm efficacy when applied in infected root canals. The purpose of this study was to evaluate the influence of incorporating zinc oxide nanoparticles (ZnO-Np) on the physicochemical properties of Grossman sealer.
METHODS: Grossman sealer was prepared according to its original formula. Additionally, 4 experimental sealers were prepared by replacing the zinc oxide component of the powder with ZnO-Np (average size of 20 nm) in different amounts (25%, 50%, 75%, and 100%). Characterization of the setting time, flow, solubility, dimensional changes, and radiopacity were performed according to American National Standards Institute (ANSI)/American Dental Association (ADA) Specification 57. Scanning electron microscopic and energy-dispersive X-ray spectroscopic analyses were conducted to assess the ultrastructural and chemical characteristics of experimental sealers subjected to the solubility test. Statistical analyses were performed with analysis of variance and post hoc Tukey-Kramer tests with a significance level of 5%.
RESULTS: A statistically significant difference in the setting time was observed among groups (P < .05), but only 25% ZnO-Np sealer complied with ANSI/ADA requirements. There was a significant difference in the flow characteristics between the control and 25% and 75% ZnO-Np experimental sealers (P < .05), but all sealers conformed to ANSI/ADA standardization; 25% ZnO-Np sealer showed significantly less solubility (1.81% ± 0.31%) and dimensional change (-0.34% ± 0.12%) than other sealers (P < .05). All sealers showed ultrastructural changes with increasing solubility.
CONCLUSIONS: ZnO-Np decreased the setting time and dimensional changes characteristic of Grossman sealer; 25% ZnO-Np improved the physicochemical properties of Grossman sealer in accordance with ANSI/ADA requirements.