Microplastics (MPs) are concerning emerging pollutants. Here, MPs in four edible aquatic species of different trophic levels (between ∼2 and 4), including fish species Esox lucius (Esocidae: Esocinae); Cyprinus carpio (Cyprinidae: Cyprininae); and Luciobarbus caspius (Cyprinidae: Barbinae); and the swan mussel Anodonta cygnea (Unionidae), were assessed in the Anzali freshwater ecosystem. It is a listed wetland in the Montreux record. MPs were extracted from gastrointestinal tracts (GI), gills, muscles, and skin. All the studied fish and mussels (n = 33) had MPs. MP fibres, fragments and sheets were detected in every GI examined, however, fibres were the only type of MPs in skins, muscles and gills and were the most abundant MP. The MPs found in the fish and mussels were mainly made of nylon (35% of the total MPs), polypropylene-low density polyethylene (30%), and polycarbonate (25%). The average numbers of MPs found in every fish specimen, expressed per wet body mass, had a moderate negative correlation with the condition factor (K) (MP/g - K: Pearson correlation r = -0.413, p = 0.049), and there was no significant relation with the growth factor (b) (r = -0.376; p = 0.068). Importantly, Luciobarbus caspius (with trophic level 2.7-2.8) bioaccumulated MPs and presented a strong correlation between their MP contamination and age (r = 0.916 p < 0.05). Greater gill mass (or related factors) played an important role in the accumulation of MPs, and there was a strong correlation between these factors for Esox lucius and Cyprinus carpio (r = 0.876; r = 0.846; p < 0.05 respectively). The highest MP/g gills (1.91 ± 2.65) were in the filter feeder Anodonta cygnea inhabiting the benthic zone. Esox lucius (piscivorous, trophic level 4.1) was the most contaminated species overall (a total of 83 MPs in 8 individuals, with 0.92 MP/g fish), and their gills where MPs mainly accumulated. Cyprinus carpio was the most contaminated specimen (MPs in specimens), while the number of MPs per mass unit increased with the trophic level. Their feeding and ecological behavior in the aquatic habitat affected the level of accumulation. This work includes evidence of translocation of MPs within the aquatic organisms.

The production and consumption of disposable face masks (DFMs) increased intensely during the COVID-19 pandemic, leading to a high amount of them being found in the terrestrial and aquatic environment. The main goal of this research study is to conduct a comparative evaluation of the water-leachability of microplastics (MPs) and chemical additives from various types of disposable surgical/medical face masks (MM DFMs) and filtering face pieces (FFPs). Fourier-Transform Infrared Spectroscopy was used for MPs analysis. Liquid Chromatography/High Resolution Mass Spectrometry was used to analyse analytes presented in the water-leachates of DFMs. FFPs released 3-4 times more microplastic particles compared to MM DFMs. The release of MPs into water from all tested DFMs without mechanical stress suggests potential MP contamination originating from the DFM production process. Our study for the first time identified bisphenol B (0.25-0.42 μg/L) and 1,4-bis(2-ethylhexyl) sulfosuccinate (163.9-115.0 μg/L) as leachables from MM DFMs. MPs in the water-leachates vary in size, with predominant particles <100 μm, and the release order from DFMs is MMIIR > MMII > FFP3>FFP2>MMI. The main type of microplastics identified in the water leachates of the investigated face masks was polypropylene, accounting for 93-97% for MM DFMs and 82-83% for FFPs. Other polymers such as polyethylene, polycarbonate, polyester/polyethylene terephthalate, polyamide/Nylon, polyvinylchloride, and ethylene-propylene copolymer were also identified, but in smaller amounts. FFPs released a wider variety and a higher percentage (17-18%) of other polymers compared to MM DFMs (3-7%). Fragments and fibres were identified in all water-leachate samples, and fragments, particularly debris of polypropylene fibres, were the most common MP morphotype. The findings in this study are important in contributing additional data to develop science-based policy recommendations on the health and environmental impacts of MPs and associated chemical additives originated from DFMs.

The centrifugal spinning (CS) method could address common issues such as low production rate and high energy consumption in the industry of nonwoven textile fabrication. Similarly to cotton candy production, the high-speed rotating reservoir extrudes melt or solvent-based polymer from orifices to produce fibres. Using polymer melt avoids solvent elimination and toxicity, but the process is more difficult. Thus, a versatile lab-scale hot melt spinneret with the ability to pour pellets inside continuously to expand our knowledge of the CS method and investigating different extrusion geometries such as nozzlefree is developed. Among the controllable parameters are, the spinneret heating temperature (up to 300°C), its two interchangeable 3D printer nozzles. An Arduino code is used to stabilize the temperature. The system performance is investigated with polypropylene and polylactide. The results show that fibres under 15 μm in diameter are produced. This work is licensed under CC BY-NC 4.0. To view a copy of this license, visithttp://creativecommons.org/licenses/by-nc/4.0/.

Fibre-based oral drug delivery systems are an attractive approach to addressing low drug solubility, although clear strategies for incorporating such systems into viable dosage forms have not yet been demonstrated. The present study extends our previous work on drug-loaded sucrose microfibres produced by centrifugal melt spinning to examine systems with high drug loading and investigates their incorporation into realistic tablet formulations. Itraconazole, a model BCS Class II hydrophobic drug, was incorporated into sucrose microfibres at 10, 20, 30, and 50% w/w. Microfibres were exposed to high relative humidity conditions (25 °C/75% RH) for 30 days to deliberately induce sucrose recrystallisation and collapse of the fibrous structure into powdery particles. The collapsed particles were successfully processed into pharmaceutically acceptable tablets using a dry mixing and direct compression approach. The dissolution advantage of the fresh microfibres was maintained and even enhanced after humidity treatment for drug loadings up to 30% w/w and, importantly, retained after compression into tablets. Variations in excipient content and compression force allowed manipulation of the disintegration rate and drug content of the tablets. This then permitted control of the rate of supersaturation generation, allowing the optimisation of the formulation in terms of its dissolution profile. In conclusion, the microfibre-tablet approach has been shown to be a viable method for formulating poorly soluble BCS Class II drugs with improved dissolution performance.

Aquaculture is an increasingly important source of nutrition for global food security, which is reliant on animal- and plant-based feeds. Anthropogenic particles, including microplastics and semi-synthetic cellulosic fibres, are prolific marine pollutants that are readily consumed by marine organisms, including small pelagic fish commonly used in fishmeal. Conversely, there is no indication plants can accumulate anthropogenic microparticles. We explore whether aquaculture feed presents a route of contamination for farmed fish. Commercially-sourced aquaculture feedstocks, including fishmeals and soybean meal, were processed (KOH digestion and ZnCl2 density separation) and anthropogenic particles characterised using microscopy and spectroscopic methods. Both fishmeal and soybean meals contained anthropogenic particles, with concentrations ranging 1070-2000 particles kg-1. The prevalence of anthropogenic particles in plant-based feeds indicates that the majority of contamination occurs post-harvest. Based on our findings, farmed Atlantic salmon may be exposed to a minimum of 1788-3013 anthropogenic particles from aquaculture feed across their commercial lifespan.

The occurrence of microplastics (MPs) was investigated in the Arvand River (Iran). The Arvand River (200 Km) is a major water body that flows through land with diverse use and it meets the Persian Gulf. This study constitutes the first assessment of MP pollution (prevalence and physico-chemical characteristics) in the Arvand river, both in the sediment and in the water. MP monitoring has been carried out in 24 stations located along the river. The MP pollution found ranged between 1 and 291 items·L-1 and 70 to 15,620 items·kg-1 (dw), in water and sediment, respectively. The majority of MPs were fibres, black/grey and yellow/orange in colour, and mainly 250-500 μm and >1000 μm in size. Polyethylene terephthalate (PET), polypropylene (PP), nylon (NYL), high-density polyethylene (HDPE), and polystyrene (PS) were found in sediment samples. All these polymers, except HDPE, were also identified in the water samples. PET and PP were dominant in the water samples; whereas PET and PS were the most abundant in the sediments. The vicinity of urban wastewater effluents could be behind MP pollution in both water and sediments. Significant differences (p < 0.05) of MP concentrations were affected by different land uses when comparing MP levels in undisturbed natural area with urban areas. A strong correlation between MP fibres and fragments found with PCA biplots revealed their similar distribution in water. In the sediment samples, fibre and fragment MP particles were significantly correlated with colloidal particles (e.g., clay and organic matter) suggesting a relevant role of colloidal particles in the aquatic ecosystem of the Arvand River in transporting MPs. This study contributes to the better understanding of the presence of MP in major rivers, which are systems that have been scarcely investigated for this type of pollution, and it can inform interventions to reduce MP inputs to the river and sea.

This study investigates the occurrence of anthropogenic fibres inside wild Paracentrotus lividus at a Mediterranean coastal area in 2020. From each sea urchin, the coelomic fluid was directly analysed while digestive tracts and gonads were removed, pre-treated with trypsin (0.3%) and digested with H2O2 (10%) before analysis. A total of 260 fibres and 1 fragment were found in 100 specimens, with an average of 2.6 items/individual. Fibres were more abundant in the digestive system, less in gonads and in the coelomic fluid, respectively. Fourier transform infrared (FTIR) analysis of representative fibres identified 67% natural (cotton-based) and 33% synthetic polymers (polyester) suggesting their origin from textiles, possibly released from laundry sewages. Overall, these results encourage further in-depth investigations on fibres accumulation and potential transfer through the trophic chain up to humans.

This study investigates, for the first time, the concentration, distribution, fate and chemical composition of microplastics (MPs) in urban and industrial soils of Ahvaz metropolis, SW Iran. MP concentrations ranged from 100 to 3135 and 80 to1220 unit·kg-1 in urban and industrial soils, respectively, with corresponding means of 619 and 390 unit·kg-1. The most contaminated urban sites were located in the city center. Precisely these areas were affected by insufficient sanitation infrastructure including sewer systems, surface runoff collection and sewage treatment, and also high traffic loading in a commercial zone. MPs were found in various shapes, colours and sizes. In particular, microfibres (white-transparent and < 250 μm) were the most abundant MPs found in urban (70%) and industrial (55%) soils. Based on the weathering observed in the MPs, a large number of them originated from the fragmentation of other plastics and could have been photobleached. Polyethylene terephthalate and nylon were the dominant polymers in the MPs found in both industrial and urban soils and they could originate from textiles and tyres.

This study examines for the first time the characteristics and human exposure of microplastics (MPs) in settled indoor dust in schools. An average of 195 MPs·g-1 of dust were detected in settled indoor composite dust samples from 28 schools in Shiraz. White-transparent microfibres with lengths 500-1000 μm were the most abundant type of MP found among the samples examined. Polyethylene terephthalate and polypropylene MPs were dominant across all types of MP found including microfibres. MPs had generally smooth morphology with sharp or regular edges which could have been released to the environment as primary MPs. Among all sampling sites, higher concentrations of MPs were found in the south and centre of the city. These were areas affected by high population density, high traffic load and high presence of industrial units and workshops. Principal Component Analysis (PCA) showed a positive strong correlation between sampling sites and MP physical characteristics. The PCA plots revealed that MP sheets and fragments were prevalent in sites in the North of Shiraz, whereas microfibres were mainly associated with sites in the South. The levels of MPs in the South of Shiraz were greater than in the rest of the country and the wind direction and topography were found to be important factors affecting the MP distribution observed. Compared to other population groups, elementary school students had relatively high exposure risk to MPs. This study reveals that microfibres are widespread in Shiraz\' schools and pose a high exposure risk to MPs for young students.

Microplastic pollution of freshwaters is known to be a great concern in China and these pollutants can be discharged into the coastal environment through fluvial processes, posing threats to the global marine ecosystem. This paper reviewed the literature measuring microplastic pollution in the Chinese freshwater environment and found that microfibres dominate other plastic morphologies in more than 65% of samples collected in surface water, sediments and effluents of wastewater treatment plants and domestic sewers. Current potential sources of microfibre pollution are identified including fishery activities, laundry sewage, and waste textiles according to previous research. Recommendations are offered using the circular economy management framework, such as textile waste reuse and recycling systems in China, for improving current control measures for microplastics in freshwaters.