Polymer fibers that combine high toughness and heat resistance are hard to achieve, which, however, hold tremendous promise in demanding applications such as aerospace and military. This prohibitive design task exists due to the opposing property dependencies on chain dynamics because traditional heat-resistant materials with rigid molecular structures typically lack the mechanism of energy dissipation. Aramid nanofibers have received great attention as high-performance nanoscale building units due to their intriguing mechanical and thermal properties, but their distinct structural features are yet to be fully captured. We show that aramid nanofibers form nanoscale crimps during the removal of water, which primarily resides at the defect planes of pleated sheets, where the folding can occur. The precise control of such a structural relaxation can be realized by exerting axial loadings on hydrogel fibers, which allows the emergence of aramid fibers with varying angles of crimps. These crimped fibers integrate high toughness with heat resistance, thanks to the extensible nature of nanoscale crimps with rigid molecular structures of poly(p-phenylene terephthalamide), promising as a template for stable stretchable electronics. The tensile strength/modulus (392-944 MPa/11-29 GPa), stretchability (25-163%), and toughness (154-445 MJ/cm3) are achieved according to the degree of crimping. Intriguingly, a toughness of around 430 MJ/m3 can be maintained after calcination below the relaxation temperature (259 °C) for 50 h. Even after calcination at 300 °C for 10 h, a toughness of 310 MJ/m3 is kept, outperforming existing polymer materials. Our multiscale design strategy based on water-bearing aramid nanofibers provides a potent pathway for tackling the challenge for achieving conflicting property combinations.

Aging and age-related diseases are intricately associated with oxidative stress and inflammation. Nonsteroidal anti-inflammatory drugs (NSAIDs) have shown their promise in mitigating age-related conditions and potentially extending lifespan in various model organisms. However, the efficacy of NSAIDs in older individuals may be influenced by age-related changes in drug metabolism and tolerance, which could result in age-dependent toxicities. This study aimed to evaluate the potential risks of toxicities associated with commonly used NSAIDs (aspirin, ibuprofen, acetaminophen, and indomethacin) on lifespan, healthspan, and oxidative stress levels in both young and old Caenorhabditis elegans. The results revealed that aspirin and ibuprofen were able to extend lifespan in both young and old worms by suppressing ROS generation and enhancing the expression of antioxidant SOD genes. In contrast, acetaminophen and indomeacin accelerated aging process in old worms, leading to oxidative stress damage and reduced resistance to heat stress through the pmk-1/skn-1 pathway. Notably, the harmful effects of acetaminophen and indomeacin were mitigated when pmk-1 was knocked out in the pmk-1(km25) strain. These results underscore the potential lack of benefit from acetaminophen and indomeacin in elderly individuals due to their increased susceptibility to toxicity. Further research is essential to elucidate the underlying mechanisms driving these age-dependent responses and to evaluate the potential risks associated with NSAID use in the elderly population.

We synthesized high-heat-resistant adhesives based on metal - organic frameworks owing to their high decomposition temperature and the absence of a glass transition. Heat-resistance tests were performed on adhesive joints consisting of zeolitic imidazolate framework (ZIF)-67-based adhesives and a copper substrate. The as-synthesized ZIF-67-based adhesive exhibited heat resistances at 600 and 700°C in air and nitrogen atmospheres, respectively, comparable to those of conventional high-heat-resistant polymer-based adhesives. The degradation mechanism of the ZIF-67 adhesives was investigated, and their high heat resistance was attributed to the stable existence of the ZIF-67 qtz phase in the adhesive layer at high temperatures without the formation of voids. Thus, adhesives based on ZIF-67 and other metal - organic frameworks can be applied in high-temperature industrial systems.
By focusing on its high thermal stability and absence of glass transition, the ZIF-67 gel was found to have high potential that is comparable to existing heat-resistant adhesives.

In recent years, crosslinking technology has been found and widely used in food, textile, pharmaceutical, bioengineering and other fields. Crosslinking is a reaction in which two or more molecules bond to each other to form a stable three-dimensional network structure to improve the strength, heat resistance and other properties of substances. The researchers found that the cross-linking technology has a significant effect on improving the thermal stability of the colloidal delivery system. In this paper, crosslinking techniques that can be used to improve the thermal stability of colloidal delivery systems are reviewed, including enzyme-, ion-, chemical-, and combined cross-linking. Initially, the underlying mechanisms of these crosslinking technologies is reviewed. Then, the impacts of crosslinking on the heat-stability of colloidal delivery systems are discussed. Finally, the application of crosslinked delivery systems in improving the thermal stability of probiotics, polyphenols, pigments, and nutrients in foods and food packaging materials is introduced. The ability of proteins and polysaccharides to form heat-stable colloidal delivery systems can be improved by crosslinking. Nevertheless, more research is required to establish the impact of different crosslinking on the thermal stability of a broader range of different delivery systems, as well as to ensure their safety and efficacy.

The stress-protective effect of melatonin (N-acetyl-5-methoxytryptamine) on plant cells is mediated by key signaling mediators, in particular calcium ions and reactive oxygen species (ROS). However, the links between changes in calcium and redox homeostasis and the formation of adaptive responses of cultivated cereals (including wheat) to the action of high temperatures have not yet been studied. In the present study, we investigated the possible involvement of ROS and calcium ions as signaling mediators in developing heat resistance in wheat (Triticum aestivum L.) seedlings and activating their antioxidant system. Treatment of 3-day-old etiolated seedlings with melatonin solutions at concentrations 0.01-10 µM increased their survival after exposure to 45 °C for 10 min. The most significant stress-protective effect was exerted by melatonin treatment at 1 µM concentration. Under the influence of melatonin, a transient enhancement of superoxide anion radical (O2•-) generation and an increase in hydrogen peroxide content were observed in roots, with a maximum at 1 h. Four hours after treatment with melatonin, the activity of catalase and guaiacol peroxidase increased in roots, while the activity of superoxide dismutase did not change significantly. After exposure to 45 °C, the activity of catalase and guaiacol peroxidase was higher in the roots of melatonin-treated wheat seedlings, and the indices of ROS generation, content of the lipid peroxidation product malonic dialdehyde, and cell membrane damage were lower than in control seedlings. Melatonin-induced changes in root ROS generation and antioxidant enzyme activities were eliminated by pretreatment with the hydrogen peroxide scavenger dimethylthiourea (DMTU), NADPH oxidase inhibitor imidazole, and calcium antagonists (the extracellular calcium chelator EGTA and phospholipase C inhibitor neomycin). Treatment with DMTU, imidazole, EGTA, and neomycin also abolished the melatonin-induced increase in survival of wheat seedlings after heat stress. The role of calcium ions and ROS, generated with the participation of NADPH oxidase, as signaling mediators in the melatonin-induced antioxidant system and heat stress resistance of wheat seedlings have been demonstrated.

Marine heatwaves (MHWs) have a significant impact on intertidal bivalves and the ecosystems they sustain, causing the destruction of organisms\' original habitats. Saccostrea mordax mainly inhabits the intertidal zone around the equator, exhibiting potential tolerance to high temperatures and maybe a species suitable for habitat restoration. However, an understanding about the tolerance mechanism of S. mordax to high temperatures is unclear. It is also unknown the extent to which S. mordax can tolerate repeated heatwaves of increasing intensity and frequency. Here, we simulated the effects of two scenarios of MHWs and measured the physiological and biochemical responses and gene expression spectrum of S. mordax. The predicted responses varied greatly across heatwaves, and no heatwave had a significant impact on the survival of S. mordax. Specifically, there were no statistically significant changes apparent in the standard metabolic rate and the activities of enzymes of the oyster during repeated heatwaves. S. mordax exposed to high-intensity heatwaves enhanced their standard metabolic rate to fuel essential physiological maintenance and increasing activity of SOD and expression of HSP70/90. These strategies are presumably at the expense of functions related to immunity and growth, as best exemplified by significant depressions in activities of enzymes (NaK, CaMg, T-ATP, and AKP) and expression levels of genes (Rab, eEF-2, HMGR, Rac1, SGK, Rab8, etc.). The performance status of S. mordax tends to improve by implementing a suite of less energy-costly compensatory mechanisms at various levels of biological organization when re-exposed to heatwaves. The adaptive abilities shown by S. mordax indicate that they can play a crucial role in the restoration of oyster reefs in tropical seas.

The production of whole-liquid eggs is of significant economic and nutritional importance. This study aimed to assess the phenotypic and genotypic diversity of mesophilic aerobic spore-forming bacteria (n = 200) isolated from pasteurized whole liquid egg and liquid egg yolk. The majority of the isolates were identified as belonging to the genera Bacillus (86 %), followed by Brevibacillus (10 %) and Lysinibacillus (4 %). For the phenotypic characterization, isolates were subjected to various heat shocks, with the most significant reductions observed at 80 °C/30 min and 90 °C/10 min for isolates recovered from raw materials. On the other hand, the decrease was similar for isolates recovered from raw material and final product at 100 °C/5 min and 110 °C/5 min. Genotypic genes related to heat resistance (cdnL, spoVAD, dacB, clpC, dnaK, and yitF/Tn1546) were examined for genotypic characterization. The dnaK gene showed a positive correlation with the highest thermal condition tested (110 °C/5 min), while 100 °C/5 min had the highest number of positively correlated genes (clpC, cdnL, yitF/Tn1546, and spoVAD). Whole Genome Sequencing of four strains revealed genes related to sporulation, structure formation, initiation and regulation, stress response, and DNA repair in vegetative cells. The findings of this study indicate that these mesophilic aerobic spore-forming bacteria may adopt several strategies to persist through the process and reach the final product. As the inactivation of these microorganisms during egg processing is challenging, preventing raw materials contamination and their establishment in processing premises must be reinforced.

Heat stress can cause cell death by triggering the aggregation of essential proteins. In bacteria, aggregated proteins are rescued by the canonical Hsp70/AAA+ (ClpB) bi-chaperone disaggregase. Man-made, severe stress conditions applied during, e.g., food processing represent a novel threat for bacteria by exceeding the capacity of the Hsp70/ClpB system. Here, we report on the potent autonomous AAA+ disaggregase ClpL from Listeria monocytogenes that provides enhanced heat resistance to the food-borne pathogen enabling persistence in adverse environments. ClpL shows increased thermal stability and enhanced disaggregation power compared to Hsp70/ClpB, enabling it to withstand severe heat stress and to solubilize tight aggregates. ClpL binds to protein aggregates via aromatic residues present in its N-terminal domain (NTD) that adopts a partially folded and dynamic conformation. Target specificity is achieved by simultaneous interactions of multiple NTDs with the aggregate surface. ClpL shows remarkable structural plasticity by forming diverse higher assembly states through interacting ClpL rings. NTDs become largely sequestered upon ClpL ring interactions. Stabilizing ring assemblies by engineered disulfide bonds strongly reduces disaggregation activity, suggesting that they represent storage states.

Laser lighting devices, comprising an ultraviolet (UV) laser chip and a phosphor material, have emerged as a highly efficient approach for generating high-brightness light sources. However, the high power density of laser excitation may exacerbate thermal quenching in conventional polycrystalline or amorphous phosphors, leading to luminous saturation and the eventual failure of the device. Here, for the first time, we raise a single-crystal (SCs) material for laser lighting considering the absence of grain boundaries that scatter electrons and phonons, achieving high thermal conductivity (0.81 W m-1 K-1) and heat-resistance (575 °C). The SCs products exhibit a high photoluminescence quantum yield (89%) as well as excellent stability toward high-power lasers (>12.41 kW/cm2), superior to all previously reported amorphous or polycrystalline matrices. Finally, the laser lighting device was fabricated by assembling the SC with a UV laser chip (50 mW), and the device can maintain its performance even after continuous operation for 4 h. Double perovskite single crystals doped with Yb3+/Er3+ demonstrated multimodal luminescence with the irradiation of 355 and 980 nm lasers, respectively. This characteristic holds significant promise for applications in spectrally tunable laser lighting and multimodal anticounterfeiting.

This study focuses on optimizing the mutagenesis process for Morchella eximia (Mel-7) mycelia through atmospheric and room temperature plasma (ARTP) mutation and explores the resultant thermal adaptability and physiological responses of mutant strains. This research demonstrated a clear relationship between ARTP mutagenesis exposure duration and lethality rate, indicating that an exposure time of 40 s resulted in the optimal balance of inducing mutations without causing excessive mortality. Additionally, this study established 43 °C as the ideal screening temperature for identifying mutant strains with enhanced heat resistance, as this temperature significantly challenges the mycelia while allowing thermotolerant strains to be distinguishable. Among the screened mutants, strains L21, L23, L44, and L47 exhibited superior growth and high-temperature tolerance, with notable resilience at 30 °C, highlighting their enhanced adaptability to above-optimal temperatures. Furthermore, this research delved into biochemical responses, including lipid peroxidation and non-enzymatic antioxidant content, highlighting the diverse mechanisms, such as enhanced lipid peroxidation resistance and increased antioxidant content, employed by mutant strains to adapt to temperature fluctuations. The activities of antioxidant enzymes, including peroxidase (POD) and superoxide dismutase (SOD), were shown to be significantly influenced by temperature elevations, illustrating their critical roles in the thermal adaptation of mutant strains. These findings shed light on the importance of considering mutation duration and temperature screening in the development of thermotolerant fungal strains with potential applications in various industries. This study\'s breakthrough lies in its comprehensive understanding of the thermal adaptability of Mel-7 mycelia and the identification of promising mutant strains, offering valuable insights for both academic and industrial purposes.