The relationship among baseline pupil size, fixation stability, and inhibitory control were examined in this study. Participants performed a baseline eye measure in which they were instructed to stare at a fixation dot on screen for 2 min. Following the baseline eye measure, participants completed an antisaccade task to measure inhibitory control ability. We found a correlation between baseline pupil size variability and inhibitory control, as well as between fixation stability and inhibitory control. We showed that participants with better inhibitory control exhibited larger variability in pupil size, and those with better fixation stability showed superior inhibitory control ability. Overall, our results indicate that there are significant correlations between inhibitory control and baseline pupil size, as well as between inhibitory control and fixation stability.

UNASSIGNED: To compare the macular area parameters and aqueous humor factors between myopia and emmetropia.
UNASSIGNED: Convenience sampling was used to select patients who visited the Changzhi Aier Eye Hospital\'s department of ophthalmology from December 2018 to December 2022 as the study participants. They were divided into three groups according to whether they were diagnosed as mild myopia myopic, highly myopic or not as follows: the mild myopia group (60 cases, 108 eyes), the high myopia group (46 cases, 78 eyes) and the healthy emmetropia group (40 cases, 65 eyes). The differences in the macular integrity (MI) assessment, optical coherence tomography and optical coherence tomography angiography parameters and aqueous humor factors were compared between the three groups.
UNASSIGNED: AL in high myopia group was the highest, and that in emmetropia group was the lowest. The BCVA of mild myopia group was the highest. The RS in the high myopia group were significantly lowest in the three groups (26.42 ± 1.04 vs. 28.34 ± 0.76 vs. 31.92 ± 0.77) (F = 5.374, p = 0.013). The 63% BCEA, 95% BCEA and MI in the high myopia group were significantly highest (p < 0.05). The mean RPE thickness, mean CT and mean RT in the high myopia group were lowest (p < 0.05). The blood flow density were lowest in the superficial fovea, paracentral fovea and different subdivisions of the paracentral fovea in the high myopia group (p < 0.05). The VEGF concentration in the aqueous humor of the high myopia group was lowest (25.62 ± 17.43 vs. 32.45 ± 24.67 vs. 64.37 ± 21.14) (F = 9.237, p < 0.001). The MMP-2 concentration was highest (483 ± 201.48 vs. 410 ± 142.37 vs. 386 ± 154.34) (F = 5.542, p = 0.018). The VEGF concentration in the aqueous humor factor was negatively correlated with the AL in the myopia group (r = -0.438, p = 0.002), the MMP-2 concentration was positively correlated with the AL (r = 0.484, p = 0.010).
UNASSIGNED: Patients with high myopia showed decreased retinal light sensitivity, fixation stability, superficial blood flow density and retinal thickness compared with people with emmetropia. A decreased VEGF concentration and increased MMP-2 concentration in the aqueous humor factor have potential associations with the development of high myopia.

BACKGROUND: The purpose of this study was to perform a biomechanical analysis to compare different medial column fixation patterns for valgus pilon fractures in a case-based model.
METHODS: Based on the fracture mapping, 48 valgus pilon fracture models were produced and assigned into four groups with different medial column fixation patterns: no fixation (NF), K-wires (KW), intramedullary screws (IS), and locking compression plate (LCP). Each group contained wedge-in and wedge-out subgroups. After fixing each specimen on the machine, gradually increased axial compressive loads were applied with a load speed of one millimeter per minute. The maximum peak force was set at 1500 N. Load-displacement curves were generated and the axial stiffness was calculated. Five different loads of 200 N, 400 N, 600 N, 800 N, 1000 N were selected for analysis. The specimen failure was defined as resultant loading displacement over 3 mm.
RESULTS: For the wedge-out models, Group-IS showed less displacement (p < 0.001), higher axial stiffness (p < 0.01), and higher load to failure (p < 0.001) than Group-NF. Group-KW showed comparable displacement under loads of 200 N, 400 N and 600 N with both Group-IS and Group-LCP. For the wedge-in models, no statistical differences in displacement, axial stiffness, or load to failure were observed among the four groups. Overall, wedge-out models exhibited less axial stiffness than wedge-in models (all p < 0.01).
CONCLUSIONS: Functional reduction with stable fixation of the medial column is essential for the biomechanical stability of valgus pilon fractures and medial column fixation provides the enough biomechanical stability for this kind of fracture in the combination of anterolateral fixation. In detail, the K-wires can provide a provisional stability at an early stage. Intramedullary screws are strong enough to provide the medial column stability as a definitive fixation. In future, this technique can be recommended for medial column fixation as a complement for holistic stability in high-energy valgus pilon fractures.

BACKGROUND: Femoral head varus triggers poor clinical prognosis in intertrochanteric fracture patients with proximal femoral nail antirotation (PFNA) fixation. Studies present that changes in nail position and screw insertion angles will affect fixation stability, but the biomechanical significance of these factors on the risk of femoral head varus has yet to be identified in PFNA fixed patients.
METHODS: Clinical data in PFNA fixed intertrochanteric fracture patients have been reviewed, the relative position of intermedullary nail has been judged in the instant postoperative lateral radiography. Regression analyses have been performed to identify the effect of this factor on femoral head varus. Corresponding biomechanical mechanism has been identified by numerical mechanical simulations.
RESULTS: A clinical review revealed that ventral side nail insertion can trigger higher risk of femoral head varus, corresponding numerical mechanical simulations also recorded poor fixation stability in models with ventral side nail insertion, and changes in the trajectory of anti-rotation blade will not obviously affect this tendency.
CONCLUSIONS: Ventral side insertion of intramedullary nail can trigger higher risk of femoral head varus in PFNA fixed patients by deteriorating the instant postoperative biomechanical environment, and changes in blade trajectory cannot change this tendency biomechanically. Therefore, this nail position should be adjusted to optimize patients\' prognosis.

OBJECTIVE: In ophthalmic surgery, different materials and fixation methods are employed for bone flap repositioning after lateral orbitotomy approach (LOA), yet there is no unified standard. This study aims to investigate the impact of different fixation strategies on orbital stability through Finite Element Analysis (FEA) simulations of the biomechanical environment for orbital rim fixation in LOA.
METHODS: A Finite Element Model (FEM) was established and validated to simulate the mechanical responses under various loads in conventional lateral orbitotomy approach (CLOA) and deep lateral orbital decompression (DLOD) using single titanium plate, double titanium plates, and double absorbable plates fixation methods. The simulations were then validated against clinical cases.
RESULTS: Under similar conditions, the maximum equivalent stress (MES) on titanium alloy fixations was greater than that on absorbable plate materials. Both under static and physiological conditions, all FEM groups ensured structural stability of the system, with material stresses remaining within safe ranges. Compared to CLOA, DLOD, which involves the removal of the lateral orbital wall, altered stress conduction, resulting in an increase of MES and maximum total deformation (MTD) by 1.96 and 2.62 times, respectively. Under a horizontal load of 50 N, the MES in FEM/DLOD exceeded the material\'s own strength, with an increase in MES and MTD by 3.18 and 6.64 times, respectively, compared to FEM/CLOA. Under a vertical force of 50 N, the MES sustained by each FEM was within safe limits. Bone flap rotation angles remained minimally varied across scenarios. During follow-up, the 12 patients validated in this study did not experience complications related to the internal fixation devices.
CONCLUSIONS: Under static or physiological conditions, various fixation methods can effectively maintain stability at the orbitotomy site, and absorbable materials, with their smoother stress transmission properties, are more suited for application in CLOA. Among titanium plate fixations, single titanium plates can better withstand vertical stress, while double titanium plates are more capable of handling horizontal stress. Given the change in the orbital mechanical behavior due to DLOD, enhanced fixation strength should be considered for bone flap repositioning.

Necrosis of the femoral head is the main complication in femoral neck fracture patients with triangle cannulated screw fixation. Instant postoperative fixation instability is a main reason for the higher risk of femoral head necrosis. Biomechanical studies have shown that cross screw fixation can effectively optimize fixation stability in patients with proximal humerus fractures and pedicle screw fixation, but whether this method can also effectively optimize the fixation stability of femoral neck fractures and reduce the corresponding risk of femoral head necrosis has yet to be identified. In this study, a retrospective review of imaging data in femoral neck fracture patients was performed. The cross angle between the femoral neck and the caudal cannulated screw was reported; if the angle between the screw and the transverse plane increased, it was recorded as positive; otherwise, it was recorded as negative. Angle values and their corresponding absolute values were compared in patients with and without femoral head necrosis. Regression analysis identified potential risk factors for femoral head necrosis. Moreover, the biomechanical effect of the screw-femoral neck angle on fixation stability was also verified by numerical mechanical simulations. Clinical review presented significantly larger positive angle values in patients with femoral head necrosis, which was also proven to be an independent risk factor for this complication. Moreover, fixation stability progressively deteriorated with increasing angle between the caudal screw and the transverse plane. Therefore, increasing the angle between the caudal screw and the transverse plane may aggravate the risk of femoral head necrosis by deteriorating the fixation stability in patients with femoral neck fracture.

Lateral platform collapse in fixations of lateral tibial plateau fractures (TPFs) using either double-lag screws fixation (DSF) or locking-plate fixation (LPF) is not rare. This study aimed to explore the effect of enhancing the interfragmentary compression force (IFCF) on fixation stability in lateral TPFs in normal and osteoporotic bones using finite element analysis. Finite element models of DSF in normal bone and LPF in normal and osteoporotic bones were established to simulate the fixations of lateral TPF. After model validation, axial compressive forces of 500, 1000, 1500, and 2500 N to the tibial plateau along with an IFCF of 0, 100, 200, and 300 N were applied. The maximum axial micromotion of the lateral fragment (MAM-LF), maximal translational micromotion of the lateral fragment (MTM-LF), peak von Mises stress (VMS), and peak equivalent elastic strain of the lateral fragment (EES-LF) were evaluated. The MAM-LF showed a decreasing trend as the IFCF increased in all models. For DSF models, the peak VMS of implants increased as the IFCF increased when the axial loads were 500 and 1000 N. The peak EES-LF decreased as the IFCF increased under axial loads of 1000, 1500, and 2500 N. For the normal and osteoporotic LPF models, the peak VMS of the implants decreased as the IFCF increased. Peak EES-LF decreased as IFCF increased. In conclusion, enhancing IFCF was beneficial in improving the fixation stability of lateral TPF. The optimal IFCF for DSF and LPF should be as high as reasonably feasible.

The aim of the study was to analyze the stability of dominant and non-dominant eye fixations, as well as the influence of development on fixation stability. The study analyzed fixation stability in 280 school-age children, ranging in age from 7 to 12 years old. Fixation stability was determined by calculating the bivariate contour ellipse area (BCEA). During the fixation task, eye movements were recorded using the Tobii Pro Fusion eye tracking device at a 250 Hz sampling frequency. The results indicate that the fixation stability of dominant and non-dominant eyes, as well as the fixation stability of each eye regardless of dominance, improves as children grow older. It was found that for 7 and 8- year-old children, fixation in the dominant eye is significantly more stable than in the non-dominant eye, while in older children, there is no significant difference in fixation stability between the dominant and non-dominant eye.

Almost all prior mouse fracture healing models have used needles or K-wires for fixation, unwittingly providing inadequate mechanical stability during the healing process. Our contention is that the reported outcomes have predominantly reflected this instability, rather than the impact of diverse biological conditions, pharmacologic interventions, exogenous growth factors, or genetic considerations. This important issue becomes obvious upon a critical review of the literature. Therefore, the primary aim of this study was to demonstrate the significance of mouse-specific implants designed to provide both axial and torsional stability (Screw and IM Nail) compared to conventional pins (Needle and K-wires), even when used in mice with differently sized marrow canals and diverse genetic backgrounds. B6 (large medullary canal), DBA, and C3H (smaller medullary canals) mice were employed, all of which have different bone morphologies. Closed femoral fractures were created and stabilized with intramedullary implants that provide different mechanical conditions during the healing process. The most important finding of this study was that appropriately designed mouse-specific implants, providing both axial and torsional stability, had the greatest influence on bone healing outcomes regardless of the different bone morphologies encountered. For instance, unstable implants in the B6 strain (largest medullary canal) resulted in significantly greater callus, with a fracture region mainly comprising trabecular bone along with the presence of cartilage 28 days after surgery. The DBA and C3H strains (with smaller medullary canals) instead formed significantly less callus, and only had a small amount of intracortical trabeculation remaining. Moreover, with more stable fracture fixation a higher BV/TV was observed and cortices were largely restored to their original dimensions and structure, indicating an accelerated healing and remodeling process. These observations reveal that the diaphyseal cortical thickness, influenced by the genetic background of each strain, played a pivotal role in determining the amount of bone formation in response to the fracture. These findings are highly important, indicating the rate and type of tissue formed is a direct result of mechanical instability, and this most likely would mask the true contribution of the tested genes, genetic backgrounds, or various therapeutic agents administered during the bone healing process.

(1) Background: Amblyopia is an ocular condition leading to structural and functional changes. The relationship between these changes is complex and remains poorly understood. (2) Methods: Participants included 31 children aged 5 to 9 years with strabismic (n = 9), anisometropic (n = 16) and mixed (n = 6) unilateral amblyopia, and 14 age-matched non-amblyopic children. The 95% and 63% Bivariate Contour Ellipse Area (BCEA), axial length, Foveal Avascular Zone (FAZ) area, center macular thickness and volume were assessed. The relationship between these parameters was explored. (3) Results: Statistically significant differences were found among the four groups in best corrected distance visual acuity (BCVA) (p < 0.001), BCEA 95% (p = 0.002) and BCEA 63% (p = 0.002), but not in the FAZ area, central macular thickness, central macular volume and axial length. Eyes with amblyopia had poorer BCVA and larger fixation instability than controls. Inter-ocular differences were more significant in patients with strabismic amblyopia, particularly in BCVA (p = 0.003), central macular thickness (p < 0.001) and central macular volume (p = 0.002). In amblyopic eyes, BCEA 95% and 63% were correlated with BCVA, but not with the FAZ area. (4) Conclusion: Amblyopia is associated with a reduction in fixation stability and BCVA, although there is a general lack of correlation with structural changes, suggesting a complex interaction between anatomy and function in amblyopia.