Six derivatives of poly-N-vinylcaprolactam (PNVCL) P1-P6 were synthesized via surfactant-free precipitation polymerization (SFPP) at 70 °C, with potassium persulfate (KPS) as the initiator. P5 and P6 were synthesized using the cross-linker N,N\'-Methylenebisacrylamide (MBA). The conductivity was measured to monitor the polymerization process. The hydrodynamic diameters (HDs) and polydispersity indexes (PDIs) of aqueous dispersions of P1-P6 were determined using dynamic light scattering (DLS) and zeta potential (ZP) using electrophoretic mobilities. At 18 °C for P1-P6, the HDs (nm) were 428.32 ± 81.30 and PDI 0.31 ± 0.19, 528.60 ± 84.70 (PDI 0.42 ± 0,04), 425.96 ± 115.42 (PDI 0.56 ± 0.08), 440.34 ± 106.40 (PDI 0.52 ± 0.09), 198.39 ± 225.35 (PDI 0.40 ± 0.19), and 1201.52 ± 1318.05 (PDI 0.71 ± 0.30), the and ZPs were (mV) 0.90 ± 3.23, -4.46 ± 1.22, -6.44 ± 1.82, 0.22 ± 0.48, 0.18 ± 0.79, and -0.02 ± 0.39 for P1-P6, respectively. The lower critical solution temperature ranged from 27 to 29 °C. The polymers were characterized using the ATR-FTIR method. The study concluded that the physicochemical properties of the product were significantly affected by the initial reaction parameters. Polymers P1-P4 and P6 have potential for use as drug carriers for skin applications.

Biomolecular condensates (BMCs) exhibit physiological and pathological relevance in biological systems. Both liquid and solid condensates play significant roles in the spatiotemporal regulation and organization of macromolecules and their biological activities. Some pathological solid condensates, such as Lewy Bodies and other fibrillar aggregates, have been hypothesized to originate from liquid condensates. With the prevalence of BMCs having functional and dysfunctional roles, it is imperative to understand the mechanism of biomolecular condensate formation and initiation. Using the low-complexity domain (LCD) of heterogenous ribonuclear protein A1 (hnRNPA1) as our model, we monitored initial assembly events using dynamic light scattering (DLS) while modulating pH and salt conditions to perturb macromolecule and condensate properties. We observed the formation of nanometer-sized BMCs (nano-condensates) distinct from protein monomers and micron-sized condensates. We also observed that conditions that solubilize micron-sized protein condensates do not solubilize nano-condensates, indicating that the balance of forces that stabilize nano-condensates and micron-sized condensates are distinct. These findings provide insight into the forces that drive protein phase separation and potential nucleation structures of macromolecular condensation.

Proteins in ionic liquids (ILs) and deep eutectic solvents (DESs) have gained significant attention due to their potential applications in various fields, including biocatalysis, bioseparation, biomolecular delivery, and structural biology. Scattering approaches including dynamic light scattering (DLS) and small-angle X-ray and neutron scattering (SAXS and SANS) have been used to understand the solution behavior of proteins at the nanoscale and microscale. This review provides a thorough exploration of the application of these scattering techniques to elucidate protein properties in ILs and DESs. Specifically, the review begins with the theoretical foundations of the relevant scattering approaches and describes the essential solvent properties of ILs and DESs linked to scattering such as refractive index, scattering length density, ion-pairs, liquid nanostructure, solvent aggregation, and specific ion effects. Next, a detailed introduction is provided on protein properties such as type, concentration, size, flexibility and structure as observed through scattering methodologies. This is followed by a review of the literature on the use of scattering for proteins in ILs and DESs. It is highlighted that enhanced data analysis and modeling tools are necessary for assessing protein flexibility and structure, and for understanding protein hydration, aggregation and specific ion effects. It is also noted that complementary approaches are recommended for comprehensively understanding the behavior of proteins in solution due to the complex interplay of factors, including ion-binding, dynamic hydration, intermolecular interactions, and specific ion effects. Finally, the challenges and potential research directions for this field are proposed, including experimental design, data analysis approaches, and supporting methods to obtain fundamental understandings of complex protein behavior and protein systems in solution. We envisage that this review will support further studies of protein interface science, and in particular studies on solvent and ion effects on proteins.

Here, we report a novel kind of protein nanoparticles of 11 nm in size, which have a central protein core surrounded by two layers of lipid. One layer of the lipid was covalently attached to the protein, while the other layer has been physically assembled around the protein core. Particle synthesis is highly modular, while both the size and charge of the protein nanoparticles are controlled in a predictable manner. Circular dichroism studies of the conjugate showed that the protein secondary structure is retained, while biophysical characterizations indicated the particle purity, size, and charge. The conjugate had a high thermal stability to steam sterilization conditions at 121°C (17 psi). After labeling the protein core with few different fluorescent dyes, they were strongly fluorescent with the corresponding colors independent of their size, unlike quantum dots. They are readily digested by proteases, and these water-soluble, non-toxic, highly stable, biocompatible, and biodegradable conjugates are suitable for cell imaging and drug delivery applications.

We report chemically fueled oscillations of vesicles. The population cycling of vesicles is driven by their self-reproduction and collapse within a biphasic reaction network involving the interplay of molecular and supramolecular events. We studied the oscillations on the molecular and supramolecular scales and tracked vesicle populations in time by interferometric scattering microscopy and dynamic light scattering. Complex supramolecular events were observed during oscillations─including vesicle reproduction, growth, and decomposition─and differences in the number, size, and mass of aggregates can often be observed within and between pulses. This system\'s dynamic behavior is reminiscent of a reproductive cycle in living cells.

Porous hybrid microparticles are characterized by their densities and porosities. Consequently, the evaluation for density and porosity of porous hybrid microparticles in liquids is crucial for predicting the transport of particles in the atmosphere, human body, and industrial processes. However, direct measurement of the density and porosity of porous hybrid microparticles in liquids remains a challenge. In this study, we investigated the centrifugal sedimentation of polystyrene-silica hybrid microparticles with and without gas-containing closed pores. A centrifugal liquid sedimentation-dynamic light scattering combined analytical method was employed to determine the apparent densities of hybrid microparticles with and without gas-containing closed pores. The porosity of the hybrid microparticles with gas-containing closed pores was elucidated based on the inner buoyancy, which is a centrifugal force generated by the presence of low-density gas inside numerous closed pores. Further, the inner gas buoyancy was analyzed to estimate the particle porosity in liquids. The results obtained in this study confirmed the feasibility of utilizing the proposed method to determine the apparent density and porosity of porous hybrid microparticles in liquids.

A novel construction strategy is introduced for an ultrasensitive dynamic light scattering (DLS) immunosensor targeting alpha fetoprotein (AFP). This approach relies on a self-assembled heptamer fusion protein (A1-C4bpα), incorporating the dual functions of multivalent recognition and crosslinking aggregation amplification due to the presence of seven AFP-specific A1 nanobodies on the A1-C4bpα heptamer. Leveraging antibody-functionalized magnetic nanoparticles for target AFP capture and DLS signal output, the proposed heptamer-assisted DLS immunosensor offers high sensitivity, strong specificity, and ease of operation. Under the optimized conditions, the designed DLS immunosensor demonstrates excellent linear detection of AFP in the concentration range 0.06 ng mL-1 to 512 ng mL-1, with a detection limit of 15 pg mL-1. The selectivity, accuracy, precision, practicability, and reliability of this newly developed method were further validated through an assay of AFP levels in spiked and actual human serum samples. This work introduces a novel approach for constructing ultrasensitive DLS immunosensors, easily extendable to the sensitive determination of other targets via simply replacing the nanobody sequence, holding great promise in various applications, particularly in disease diagnosis.

Aggregation of monoclonal antibodies (mAbs) is the driving force for their undesirable immunogenic effects. There are multiple factors responsible for aggregation in therapeutic proteins. One significant cause is the process-related shear and interfacial stress generated due to impellers and stirrers. This investigation focuses on understanding the possible aggregation arising upon stirring mAb formulations using stirrers made of different materials. We used quantitative laser diffraction (qLD) to monitor and quantify the stirring induced formation of submicron and subvisible aggregates in the size range from 100 nm to 10 µm. We analysed various aspects of aggregate generation, such as onset of aggregation, particle size distribution, and concentration of aggregates generated using stirrers of different materials. We observed that mixing with stainless steel stirrers resulted in a quicker onset of aggregation and led to significantly higher concentrations of aggregates. Analysis of the stirred samples using dynamic light scattering (DLS) and background imaging technique (BMI) were conducted to complement the qLD analysis. All the three techniques resulted in a similar trend, showing presence of larger and higher quantities of aggregates in steel stirred samples, as compared to those stirred using PEEK and glass. Additionally, we performed SEC-HPLC to quantify the soluble fraction of monomer and recorded that the least amount was present in the steel stirred samples. This work highlights the need for optimizing the materials used for fabricating the stirrers/impellers.

Elastin-like polymers are a class of stimuli-responsive protein polymers that hold immense promise in applications such as drug delivery, hydrogels, and biosensors. Yet, understanding the intricate interplay of factors influencing their stimuli-responsive behavior remains a challenging frontier. Using temperature-controlled dynamic light scattering and zeta potential measurements, we investigate the interactions between buffer, pH, salt, water, and protein using an elastin-like polymer containing ionizable lysine residues. We observed the elevation of transition temperature in the presence of the common buffering agent HEPES at low concentrations, suggesting a \"salting-in\" effect of HEPES as a cosolute through weak association with the protein. Our findings motivate a more comprehensive investigation of the influence of buffer and other cosolute molecules on elastin-like polymer behavior.

Gum Arabic underwent enzymatic modification with curcumin oxidation products, prompting self-assembly in water at lower concentrations than native gum Arabic, which was fully soluble. The resulting particles displayed a narrow size distribution, suggestive of a micellization mechanism akin to Critical Micellization Concentration (CMC) in surfactants or Critical Aggregation Concentration (CAC) in polymers. Accurately determining CAC is vital for utilizing polymers in molecule encapsulation, but precise measurement is challenging, requiring multiple techniques. Initially, CAC was probed via turbidity measurements, dynamic light scattering (DLS), and isothermal calorimetric titration (ITC), yielding a range of 0.0015 to 0.01 %. Micro-scale thermophoresis (MST) was then employed for the first time to define CAC more precisely, facilitated by the intrinsic fluorescence of modified gum Arabic. Using MST, CAC was pinpointed at 0.001 % (w/v), a novel approach. Furthermore, MST revealed a low EC50 value of 0.007 % (w/t) for self-assembly, signifying uniformity among GAC sub-units and assembly stability upon dilution.