OBJECTIVE: To assess the biocompatibility, bioactivity, and immunomodulatory properties of three new calcium silicate cement-based sealers: Ceraseal (CS), Totalfill BC Sealer (TFbc) and WellRoot ST (WR-ST) on human periodontal ligament stem cells (hPDLSCs).
METHODS: HPDLSCs were isolated from extracted third molars from healthy patients. Eluates (1:1, 1:2, and 1:4 ratio) and sample discs of CS, TFbc and WR-ST after setting were prepared. A series of assays were performed: cell characterization, cell metabolic activity (MTT assay) cell attachment and morphology (SEM assay), cell migration (wound-healing assay), cytoskeleton organization (phaloidin-based assay); IL-6 and IL-8 release (ELISA); differentiation marker expression (RT-qPCR assay), and cell mineralization (Alizarin Red S staining). HPDLSCs cultured in unconditioned (negative control) or osteogenic (positive control) culture media were used as a comparison. Statistical significance was established at p < 0.05.
RESULTS: All the tested sealers exhibited similar results in the cytocompatibility assays (cell metabolic activity, migration, attachment, morphology, and cytoskeleton organization) compared with a negative control group. CS and TFbc exhibited an upregulation of at least one osteo/cementogenic marker compared to the negative and positive control groups. CS and TFbc also showed a significantly higher calcified nodule formation than the negative and positive control groups. Both the marker expression and calcified nodule formation were significantly higher in CS-treated cells than TFbc treated cells. WR-ST exhibited similar results to the control group. CS and TFbc-treated cells exhibited a significant downregulation of IL-6 after 72 h of culture compared to the negative control group (p < 0.05).
CONCLUSIONS: All the tested sealers exhibited an adequate cytocompatibility. CS significantly enhances cell differentiation by upregulating the expression of key genes associated with bone and cementum formation. Additionally, CS was observed to facilitate the mineralization of the extracellular matrix effectively. In contrast, the effects of TFbc and WR-ST on these processes were less pronounced compared to CS. Furthermore, both CS and TFbc exhibited an anti-inflammatory potential, contributing to their potential therapeutic benefits in regenerative endodontics.
CONCLUSIONS: This is the first study to compare the biological properties and immunomodulatory potential of Ceraseal, Totalfill BC Sealer, and WellRoot ST. The results act as supporting evidence for their use in root canal treatment.

Combining a biocompatible hydrogel scaffold with the cell-supportive properties of silk fibroin (SF) and the unique functionalities of ZnFe2O4 nanoparticles creates a promising platform for advanced nanobiomaterials. The research is centered on synthesizing a natural hydrogel using cellulose (Cellul) and sodium alginate (SA) combined with SF and zinc ferrite nanoparticles. A range of analytical and biological assays were conducted to determine the biological and physicochemical properties of the nanobiocomposite. The hemolysis and 2,5-diphenyl-2H-tetrazolium bromide (MTT) assays indicated that the SA-Cellul hydrogel/SF/ZnFe2O4 nanobiocomposite was a biocompatible against human dermal fibroblasts (Hu02) and red blood cells (RBC). In addition, aside from demonstrating outstanding anti-biofilm activity, the nanobiocomposite also promotes the Hu02 cells adhesion, showcasing the synergistic effect of incorporating SF and ZnFe2O4 nanoparticle. These promising results show that this nanobiocomposite has potential applications in various biomedical fields.

The clinical success of implanted biomaterials such as dental implants is largely determined by the molecular signaling that occurs at the tissue-implant interface. The modification of surface topography is a widely-employed strategy for optimizing tissue integration with dental implants. However, little is known regarding the direct, cellular-level effects of substratum topography on platelet signaling and adhesion, despite these cells being the first to encounter the implant surface during surgical placement. Here we compared platelet adhesion and secretion on four (4) different titanium surfaces, notably, the modifications applied to commercially available dental implants: smooth (S) titanium; acid-etched (AE), sandblasted (SB) and a combined acid-etching/sandblasting procedure (SLA). Platelets were isolated from human blood, washed, and seeded on to the 4 test surfaces; platelet adhesion was quantified by microscopy. In addition, the secretion of critical molecules stored in platelet granules (platelet factor 4, PF4; soluble P-selectin, sCD62P; transforming growth factor-beta1, TGF-β1; platelet-derived growth factor-AB, PDGF-AB) was measured by enzyme-linked immunosorbent assay (ELISA) analysis of the supernatants. There was greater platelet adhesion to the rougher AE and SB surfaces, however, the concentration of the secreted growth factors was comparable on all surfaces. We conclude that while surface topography can be engineered to modulate initial platelet adhesion, granule secretion is likely regulated as a separate and independent process.

Over the last decade, the use of microfabricated substrates has proven pivotal for studying the effect of substrate topography on cell deformation and migration. Microfabrication techniques allow one to construct a transparent substrate with topographic features with high designability and reproducibility and thus well suited to experiments that microscopically address how spatial and directional bias are brought about in the cytoskeletal machineries and hence cell motility. While much of the progress in this avenue of study has so far been made in adhesive cells of epithelial and mesenchymal nature, whether related phenomena exist in less adhesive fast migrating cells is relatively unknown. In this chapter, we describe a method that makes use of micrometer-scale ridges to study fast-migrating Dictyostelium cells where it was recently shown that membrane evagination associated with macropinocytic cup formation plays a pivotal role in the topography sensing. The method requires only basic photolithography, and thus the step-by-step protocol should be a good entry point for cell biologists looking to incorporate similar microfabrication approaches.

BACKGROUND: Viperin, also known as radical S-adenosyl-methionine domain containing protein 2 (RSAD2), is an interferon-inducible protein that is involved in the innate immune response against a wide array of viruses. In mammals, Viperin exerts its antiviral function through enzymatic conversion of cytidine triphosphate (CTP) into its antiviral analog ddhCTP as well as through interactions with host proteins involved in innate immune signaling and in metabolic pathways exploited by viruses during their life cycle. However, how Viperin modulates the antiviral response in fish remains largely unknown.
RESULTS: For this purpose, we developed a fathead minnow (Pimephales promelas) clonal cell line in which the unique viperin gene has been knocked out by CRISPR/Cas9 genome-editing. In order to decipher the contribution of fish Viperin to the antiviral response and its regulatory role beyond the scope of the innate immune response, we performed a comparative RNA-seq analysis of viperin-/- and wildtype cell lines upon stimulation with recombinant fathead minnow type I interferon.
CONCLUSIONS: Our results revealed that Viperin does not exert positive feedback on the canonical type I IFN but acts as a negative regulator of the inflammatory response by downregulating specific pro-inflammatory genes and upregulating repressors of the NF-κB pathway. It also appeared to play a role in regulating metabolic processes, including one carbon metabolism, bone formation, extracellular matrix organization and cell adhesion.

Objective: To investigate the role and underlying mechanisms of intercellular adhesion molecule-1 (ICAM-1) in the adhesion and migration of mesenchymal stem cells (MSCs) in patients with ankylosing spondylitis (AS). Methods: Bone marrow and ligament tissues were collected during surgery from patients with AS and thoracolumbar fractures (as controls, HC) treated from October 2021 to October 2022 at Nanjing University Medical School Affiliated Nanjing Drum Tower Hospital. MSCs were isolated and cultured from the bone marrow using the Ficoll separation method. Cell morphology was observed under high-resolution microscopy, and differences in the cytoskeletal features between AS-and HC-MSCs were analyzed through immunofluorescence staining. The expression of ICAM-1 was quantified in both groups using real-time quantitative polymerase chain reaction (RT-qPCR) and flow cytometry. Transwell migration assays and wound healing experiments were conducted to evaluate the differences in migration rates between the two groups of MSCs. Results: The interspinous ligament and bone marrow was acquired in AS (2 males and 1 female; 33, 37, 32 years old, respectively) and no-AS patients (2 males and 1 female; 35, 32, 38 years old, respectively). AS-MSCs exhibited broader cell morphology compared to HC-MSCs under bright field and fluorescence microscopy. Immunofluorescence staining of the interspinous ligament showed higher expression of ICAM-1 (68.38±3.42 vs 48.31±2.43) and CD105 (37.97±2.16 vs 23.36±2.06) in AS patients (both P<0.001). Western blot and RT-qPCR analysis revealed significantly stronger protein expression and transcription levels of ICAM-1 in AS-MSCs when compared to those in HC-MSCs (both P<0.001). Flow cytometry confirmed greater mean fluorescence intensity of ICAM-1 in AS-MSCs than in that in HC-MSCs (924.30±54.99 vs 636.47±40.03, P=0.002). Regarding cell adhesion efficiency, it showed no significant difference between AS-MSCs and HC-MSCs in the early stage of adhesion (0.5 h: 1 496±213 vs 1 205±163, P=0.133), but they were all significantly higher in AS-MSCs in the later stage (1 h: 2 894±172 vs 1 908±155, P=0.002; 2 h: 4 540±286 vs 3 334±188, P=0.004; 3 h: 5 212±281 vs 4 208±303, P=0.014). Finally, cell migration experiments demonstrated a stronger migration capability of AS-MSCs compared to HC-MSCs (5 449±172 vs 4 016±155, P<0.001), and the inhibition efficiency of A-205804 on the migration rate of AS-MSCs was stronger than that on HC-MSCs (2 145±239 vs 3 539±316, P=0.004). Conclusions: The aberrant expression of ICAM-1 markedly influences the adhesion and migration dynamics of MSCs. Elevated ICAM-1 levels in MSCs derives from patients with AS significantly enhance their migratory capabilities.
目的： 探讨细胞间黏附分子-1（ICAM-1）在强直性脊柱炎（AS）骨髓间充质干细胞（MSCs）黏附与迁移中的作用及其机制。 方法： 回顾性收集2021年10月至2022年10月南京大学医学院附属鼓楼医院AS和胸腰椎骨折患者（作为对照，HC组）术中骨髓组织和韧带组织，采用Ficoll分离法，分离培养MSCs。高分辨率显微镜观察细胞形态，并采用免疫荧光染色对比分析AS与HC组MSCs的细胞骨架差异。通过实时荧光定量PCR（RT-qPCR）和流式细胞术分析AS与对照组的组织ICAM-1表达。Transwell迁移实验及伤口愈合实验计算两组MSCs的迁移个数和迁移面积差异，评估两组细胞的迁移速率。 结果： 取AS组患者（2男1女，年龄分别为33、37、32岁）和对照组患者（2男1女，年龄分别为35、32、38岁）骨髓和棘间韧带组织。明场和荧光染色观察到AS-MSCs相较于HC-MSCs细胞形态宽大。棘间韧带免疫荧光染色结果显示AS患者表达更多的ICAM-1（68.38±3.42比48.31±2.43）和CD105（37.97±2.16比23.36±2.06）（均P<0.001）。通过Western印迹法和RT-qPCR结果分析，AS-MSCs的ICAM-1的蛋白表达和转录水平均明显高于HC组（均P<0.001）。流式细胞术验证AS-MSCs的ICAM-1的荧光强度值高于HC-MSCs（924.30±54.99比636.47±40.03，P=0.002）。在细胞黏附效率上，AS-MSCs在黏附初期与HC-MSCs无差异［0.5 h：（1 496±213）比（1 205±163）个，P=0.133］，后期AS-MSCs的黏附效率高于HC-MSCs［1 h：（2 894±172）比（1 908±155）个，P=0.002；2 h：（4 540±286）比（3 334±188）个，P=0.004；3 h：（5 212±281）比（4 208±303）个，P=0.014］。细胞迁移实验证明AS-MSCs的迁移能力比HC-MSCs更强［（5 449±172）比（4 016±155）个，P<0.001］，并且使用ICAM-1抑制剂A-205804后，对于AS-MSCs迁移速率的抑制效率高于HC-MSCs［（2 145±239）比（3 539±316）个，P=0.004］。 结论： ICAM-1异常表达对于MSCs黏附和迁移有显著影响，AS-MSCs的ICAM-1表达显著性增加，进而增加了AS-MSCs的迁移速率。.

Degradable piezoelectric materials possess significant potential for application in the realm of bone tissue regeneration. However, the correlation between cell regulation mechanisms and the dynamic variation caused by material degradation has not been explained, hindering the optimization of material design and its in vivo application. Herein, piezoelectric poly (L-lactic acid) (PLLA) nanofibers with different molecular weights (MW) were fabricated, and the effects of their piezoelectric properties, structural morphology, and material products during degradation on the adhesion and osteogenic differentiation of mesenchymal stem cells (MSCs) were investigated. Our results demonstrated that cell adhesion-mediated piezoelectric stimulation could significantly enhance cell spreading, cell orientation, and upregulate the expression of calmodulin, which further triggers downstream signaling cascade to regulate osteogenic differentiation markers of type I collagen and runt-related transcription factor 2. Additionally, during the degradation of the nanofibers, the piezoelectric properties of PLLA weakened, the fibrous structure gradually diminished, and pH levels in the vicinity decreased, which resulting in reduced osteogenic differentiation capability of MSCs. However, nanofibers with higher MW (280 kDa) have the ability to maintain the fibrous morphology and piezoelectricity for a longer time, which can regulate the osteogenic differentiation of stem cells for more than 4 weeks. These findings have provide a new insight to correlate cell behavior with MW and the biodegradability of piezopolymers, which revealed an active method for cell regulation through material optimization for bone tissue engineering in near future.

Desmosomes are relatives of ancient cadherin-based junctions, which emerged late in evolution to ensure the structural integrity of vertebrate tissues by coupling the intermediate filament cytoskeleton to cell-cell junctions. Their ability to dynamically counter the contractile forces generated by actin-associated adherens junctions is particularly important in tissues under high mechanical stress, such as the skin and heart. Much more than the simple cellular \'spot welds\' depicted in textbooks, desmosomes are in fact dynamic structures that can sense and respond to changes in their mechanical environment and external stressors like ultraviolet light and pathogens. These environmental signals are transmitted intracellularly via desmosome-dependent mechanochemical pathways that drive the physiological processes of morphogenesis and differentiation. This Cell Science at a Glance article and the accompanying poster review desmosome structure and assembly, highlight recent insights into how desmosomes integrate chemical and mechanical signaling in the epidermis, and discuss desmosomes as targets in human disease.

BACKGROUND: The aim of this study was to evaluate the adhesion of Candida glabrata, Candida albicans, Candida krusei, Candida parapsilosis and Candida tropicalis yeasts to disk-shaped resin materials produced from resin which used in the production of surgical guide with 0, 45 and 90-degrees printing orientations by Liquid Crystal Display additive manufacturing technology.
METHODS: Disk-shaped specimens were printed with surgical guide resin using the Liquid Crystal Display production technique in 3 printing orientations (0, 45 and 90-degrees). Surface roughness and contact angle values were evaluated. Real-Time PCR analysis was performed to evaluate Candida adhesion (C. glabrata, C. albicans, C. krusei, C. parapsilosis and C. tropicalis) Field emission scanning electron microscope (FESEM) images of the materials were obtained.
RESULTS: Specimens oriented at 45-degrees demonstrated higher surface roughness (P < .05) and lower contact angle values than other groups. No significant difference was found in the adhesion of C. glabrata, C. albicans, and C. parapsilosis among specimens printed at 0, 45, and 90-degrees orientations (P > .05). A higher proportion of C. krusei and C. tropicalis was found in the specimens printed at orientation degrees of 45 = 90 < 0 with statistical significance. Analyzing the adhesion of all Candida species reveals no statistical disparity among the printing orientations.
CONCLUSIONS: The surface roughness, contact angle, and adhesion of certain Candida species are affected by printing orientations. Hence, careful consideration of the printing orientation is crucial for fabricating products with desirable properties. In 45-degree production, roughness increases due to the layered production forming steps, whereas in 0-degree production, certain Candida species exhibit high adhesion due to the formation of porous structures. Consequently, considering these factors, it is advisable to opt for production at 90-degrees, while also considering other anticipated characteristics.

The salivary gland undergoes branching morphogenesis to elaborate into a tree-like structure with numerous saliva-secreting acinar units, all joined by a hierarchical ductal system. The expansive epithelial surface generated by branching morphogenesis serves as the structural basis for the efficient production and delivery of saliva. Here, we elucidate the process of salivary gland morphogenesis, emphasizing the role of mechanics. Structurally, the developing salivary gland is characterized by a stratified epithelium tightly encased by the basement membrane, which is in turn surrounded by a mesenchyme consisting of a dense network of interstitial matrix and mesenchymal cells. Diverse cell types and extracellular matrices bestow this developing organ with organized, yet spatially varied mechanical properties. For instance, the surface epithelial sheet of the bud is highly fluidic due to its high cell motility and weak cell-cell adhesion, rendering it highly pliable. In contrast, the inner core of the bud is more rigid, characterized by reduced cell motility and strong cell-cell adhesion, which likely provide structural support for the tissue. The interactions between the surface epithelial sheet and the inner core give rise to budding morphogenesis. Furthermore, the basement membrane and the mesenchyme offer mechanical constraints that could play a pivotal role in determining the higher-order architecture of a fully mature salivary gland.