The strong metal-support interaction (SMSI) in supported catalysts plays a dominant role in catalytic degradation, upgrading, and remanufacturing of environmental pollutants. Previous studies have shown that SMSI is crucial in supported catalysts\' activity and stability. However, for redox reactions catalyzed in environmental catalysis, the enhancement mechanism of SMSI-induced oxygen vacancy and electron transfer needs to be clarified. Additionally, the precise control of SMSI interface sites remains to be fully understood. Here we provide a systematic review of SMSI\'s catalytic mechanisms and control strategies in purifying gaseous pollutants, treating organic wastewater, and valorizing biomass solid waste. We explore the adsorption and activation mechanisms of SMSI in redox reactions by examining interfacial electron transfer, interfacial oxygen vacancy, and interfacial acidic sites. Furthermore, we develop a precise regulation strategy of SMSI from systematical perspectives of interface effect, crystal facet effect, size effect, guest ion doping, and modification effect. Importantly, we point out the drawbacks and breakthrough directions for SMSI regulation in environmental catalysis, including partial encapsulation strategy, size optimization strategy, interface oxygen vacancy strategy, and multi-component strategy. This review article provides the potential applications of SMSI and offers guidance for its controlled regulation in environmental catalysis.

Manganese dioxide (MnO2), renowned for its abundant natural crystal phases, emerges as a leading catalyst candidate for the degradation of pollutants. The relationship between its crystal phase and catalytic activity, particularly for periodate activation, has remained both ambiguous and contentious. This study delineates the influence of various synthetic MnO2 phase structures on their capabilities in catalyzing periodate-assisted pollutant oxidation. Five distinct MnO2 phase structures (α-, β-, γ-, δ-, and ε-MnO₂) were prepared and evaluated to activate periodate and degrade pollutants, following the sequence: α-MnO₂ > γ-MnO₂ > β-MnO₂ > ε-MnO₂ > δ-MnO₂. Through quenching experiments, electron paramagnetic resonance tests, and in situ electrochemical studies, we found an electron transfer-mediated process drive pollutant degradation, facilitated by a highly reactive metastable intermediate complex (MnO₂/PI*). Quantitative structure-activity relationship analysis further indicated that degradation efficiency is strongly associated with both the crystal phase and the Mn (IV) content, highlighting it as a key active site. Moreover, the α-MnO₂ phase demonstrated exceptional recycling stability, enabling an effective pollutant removal in a continuous flow packed-bed reactor for 168 h. Thus, α-MnO₂/PI proved highly effective in mineralizing organic pollutants and reducing their toxicities, highlighting its significant potential for environmental remediation.

Highlights   S-scheme heterojunction was fabricated through in-situ solvothermal method 3D worm-like BOR and 3D rocky stone CNPO composite exhibited high photoactivity through •O2- 3D/3D junction occurred through bridging bond for efficient charge separation Waste H2O2 was turned into wealth •OH for mineralization of OTC and LVX Bi0 plasmon assisted stability and H2O2 decomposition and Ov influenced its production.

Metal-organic frameworks (MOFs) show potential application in many domains, in which photochromic MOFs (PMOFs) have received enormous attention. Researchers mainly utilize photoactive ligands to build PMOFs. Recently, the mixed electron donating and accepting ligands strategies have also been used to construct PMOFs driven by the electron transfer between nonphotochromic moieties. However, the potential interligand competition inhibits the formation of PMOFs. Therefore, the exploration of single-ligand-guided assembly is conductive for building PMOFs. Considering the existing electron accepting and donating role of pyridyl and carboxyl, the pyridinecarboxyate derived from the fusion of pyridyl and carboxyl units may serve as single ligand to yield PMOFs. In this work, the coordination assembly of bipyridinedicarboxylate (2,2\'-bipyridine-4,4\'-dicarboxylic acid, H2bpdc; 1,10-phenanthroline-2,9-dicarboxylic acid, H2pda) and LaCl3 generate two PMOFs, [La(bpdc)(H2O)Cl] (1) and [La(pda)(H2O)2Cl]·2H2O (2). Both complexes feature dinuclear lanthanum as building blocks with differences in the connecting number of likers, in which 1 has (4,8)-connected topology and 2 exhibits sql topology. Their structural differences result in the diversities of photoresponsive functionalities. Compared with reported PMOFs built from photoactive ligands and mixed ligands, this study provides new available categories of single ligand for generating PMOFs and tuning the structure and photoresponsive properties via ligand substitution and external photostimulus.

Nitric oxide synthases (NOSs), a family of flavo-hemoproteins with relatively rigid domains linked by flexible regions, require optimal FMN domain docking to the heme domain for efficient interdomain electron transfer (IET). To probe the FMN-heme interdomain docking, the magnetic dipole interactions between the FMN semiquinone radical (FMNH•) and the low-spin ferric heme centers in oxygenase/FMN (oxyFMN) constructs of neuronal and inducible NOS (nNOS and iNOS, respectively) were measured using the relaxation-induced dipolar modulation enhancement (RIDME) technique. The FMNH• RIDME data were analyzed using the mesoscale Monte Carlo calculations of conformational distributions of NOS, which were improved to account for the native degrees of freedom of the amino acid residues constituting the flexible interdomain tethers. This combined computational and experimental analysis allowed for the estimation of the stabilization energies and populations of the docking complexes of calmodulin (CaM) and the FMN domain with the heme domain. Moreover, combining the five-pulse and scaled four-pulse RIDME data into a single trace has significantly reduced the uncertainty in the estimated docking probabilities. The obtained FMN-heme domain docking energies for nNOS and iNOS were similar (-3.8 kcal/mol), in agreement with the high degree of conservation of the FMN-heme domain docking interface between the NOS isoforms. In spite of the similar energetics, the FMN-heme domain docking probabilities in nNOS and iNOS oxyFMN were noticeably different (~ 0.19 and 0.23, respectively), likely due to differences in the lengths of the FMN-heme interdomain tethers and the docking interface topographies. The analysis based on the IET theory and RIDME experiments indicates that the variations in conformational dynamics may account for half of the difference in the FMN-heme IET rates between the two NOS isoforms.

Microscale thermophoresis (MST) is a technique used to measure the strength of molecular interactions. MST is a thermophoretic-based technique that monitors the change in fluorescence associated with the movement of fluorescent-labeled molecules in response to a temperature gradient triggered by an IR LASER. MST has advantages over other approaches for examining molecular interactions, such as isothermal titration calorimetry, nuclear magnetic resonance, biolayer interferometry, and surface plasmon resonance, requiring a small sample size that does not need to be immobilized and a high-sensitivity fluorescence detection. In addition, since the approach involves the loading of samples into capillaries that can be easily sealed, it can be adapted to analyze oxygen-sensitive samples. In this Bio-protocol, we describe the troubleshooting and optimization we have done to enable the use of MST to examine protein-protein interactions, protein-ligand interactions, and protein-nanocrystal interactions. The salient elements in the developed procedures include 1) loading and sealing capabilities in an anaerobic chamber for analysis using a NanoTemper MST located on the benchtop in air, 2) identification of the optimal reducing agents compatible with data acquisition with effective protection against trace oxygen, and 3) the optimization of data acquisition and analysis procedures. The procedures lay the groundwork to define the determinants of molecular interactions in these technically demanding systems. Key features • Established procedures for loading and sealing tubes in an anaerobic chamber for subsequent analysis. • Sodium dithionite (NaDT) could easily be substituted with one electron-reduced 1,1\'-bis(3-sulfonatopropyl)-4,4\'-bipyridinium [(SPr)2V•] to perform sensitive biophysical assays on oxygen-sensitive proteins like the MoFe protein. • Established MST as an experimental tool to quantify binding affinities in novel enzyme-quantum dot biohybrid complexes that are extremely oxygen-sensitive.

Phenols are the widely detected contaminants in the aquatic environment. Pyrogenic carbon (PyC) can mediate phenols degradation, but the specific properties of PyC or phenols influencing this reaction remain unknown. The present study investigated the kinetic process and mechanism of removal of various phenols by different PyC in aqueous phase system. To avoid the impact of the accumulated degradation byproducts on the overall reaction, we conducted a short-term experiment, quantified adsorption and degradation, and obtained reaction rate constants using a two-compartment first-order kinetics model. The adsorption rate constants (ka) of phenols by PyC were 10-220 times higher than degradation rate constants (kd), and they were positively correlated. Interestingly, no correlation was found between kd and common PyC properties, including functional groups, electron transfer capacities, and surface properties. Phenols were primarily attacked by •OH in the adsorbed phase. But neither the instantly trapped •OH, nor the accumulated •OH could explain phenol degradation. Chemical redox titration revealed that the electron transfer parameters, such as the electron donating rate constant (kED) of PyC, correlated well with kd (r>0.87, P < 0.05) of phenols. Analysis of 13 phenols showed that Egap and ELUMO negatively correlated with their kd, confirming the importance of the electronic properties of phenols to their degradation kinetics. This study highlights the importance of PyC electron transfer kinetics parameters for phenols degradation and manipulation of PyC electron transfer rate may accelerate organic pollutant removal, which contributes to a deeper understanding of the environmental behavior and application of PyC systems.

The presence of organic phosphorus may influence the characteristics of Cr(VI) reduction and immobilization on Fe(II)-bearing clay minerals under anoxic conditions, as the organic phosphorus tends to bind strongly to clay minerals in soil. Herein, reduced nontronite (rNAu-2) was used to reduction of Cr(VI) in the presence of phytic acid (IHP) at neutral pH. With IHP concentration from 0 to 500 μM, Cr(VI) reduction decreased obviously (17.8%) within first 5 min, and then preferred to stagnate during 4-12 h (≥50 μM). After that, Cr(VI) was reduced continuously at a slightly faster rate. Density functional theory (DFT) calculations revealed that IHP primarily absorbed at the edge sites of rNAu-2 to form Fe-IHP complexes. X-ray diffraction (XRD), scanning transmission electron microscopy (STEM), and Fourier transform infrared spectroscopy (FTIR) results demonstrated that IHP hindered the ingress of CrO42- into the interlayer space of rNAu-2 and impeded their reduction by trioctahedral Fe(II) and Al-Fe(II) at basal plane sites in the initial stage. Additionally, Fe(II) extraction results showed that IHP promoted the electron from interior transfer to near-edge, but hindered it further transfer to surface, resulting in the inhibition on Cr(VI) reduction at edge sites during the later stage. Consequently, IHP inhibits the reduction and immobilization of Cr(VI) by rNAu-2. Our study offers novel insights into electron transfer pathways during the Cr(VI) reduction by rNAu-2 with coexisting IHP, thereby improve the understanding of the geochemical processes of chromium within the iron cycle in soil.

It is of great significance to develop an energy-efficient and external oxidant-free strategy for antibiotics removal. In this study, the novel light-dark tandem strategy was established to enhance tetracycline (TC) removal by bifunctional FeCu-doped carbon composites (FeCu@BC) derived from waste cotton fabrics. Interestingly, over 95 % TC was removed by FeCu@BC under light alone and dark alone in 10 min, with the same preferred conditions of pH 7.50 and 0.04 g/L catalyst dosage. Surprisingly, the enhanced mineralization efficiency of TC was achieved by the light-dark tandem without adjusting the parameters as 86.65 %, which was 1.13, 1.46 and 2.12 times higher than those of the dark-light tandem, light alone and dark alone, respectively. The mechanisms were elucidated as that 83.28 % direct degradation and 4.37 % indirect degradation under light while 47.63 % direct degradation and 24.16 % indirect degradation under darkness contributed for TC removal. The synergetic effects of persistent free radicals (PFRs) and FeCu interactions enabled FeCu@BC to work efficiently under both light and darkness, and light enhanced electron transfer between PFRs and FeCu interactions. Furthermore, energetic electrons stored in these active sites under light could be extracted to enhance electron transfer under subsequent darkness and the strongly catalytically active species initiated under light remained in action after cessation of light. Finally, high molecular TC was easily decomposed by energetic photo-catalysis and low molecular intermediates were mineralized under subsequent enhanced dark-catalysis to increase the mineralization efficiency. In general, this study provided an eco-friendly organics removal strategy and mechanisms insights based on the natural day-night cycle.

In the green alga Chlamydomonas reinhardtii, hydrogen production is catalyzed via the [FeFe]-hydrogenases HydA1 and HydA2. The electrons required for the catalysis are transferred from ferredoxin (FDX) towards the hydrogenases. In the light, ferredoxin receives its electrons from photosystem I (PSI) so that H2 production becomes a fully light-driven process. HydA1 and HydA2 are highly O2 sensitive; consequently, the formation of H2 occurs mainly under anoxic conditions. Yet, photo-H2 production is tightly coupled to the efficiency of photosynthetic electron transport and linked to the photosynthetic control via the Cyt b6f complex, the control of electron transfer at the level of photosystem II (PSII) and the structural remodeling of photosystem I (PSI). These processes also determine the efficiency of linear (LEF) and cyclic electron flow (CEF). The latter is competitive with H2 photoproduction. Additionally, the CBB cycle competes with H2 photoproduction. Consequently, an in-depth understanding of light-driven H2 production via photosynthetic electron transfer and its competition with CO2 fixation is essential for improving photo-H2 production. At the same time, the smart design of photo-H2 production schemes and photo-H2 bioreactors are challenges for efficient up-scaling of light-driven photo-H2 production.