Reconstruction of posterior lamellar eyelids remains challenging due to their delicate structure, highly specialized function, and cosmetic concerns. Current clinically available techniques for posterior lamellar reconstruction mainly focus on reconstructing the contour of the eyelids. However, the posterior lamella not only provides structural support for the eyelid but also offers a smooth mucosal surface to facilitate globe movement and secrete lipids to maintain ocular surface homeostasis. Bioengineered posterior lamellar substitutes developed via acellular or cellular approaches have shown promise as alternatives to current therapies and encouraging outcomes in animal studies and clinical conditions. Here, we provide a brief reference on the current application of autografts, biomaterials, and tissue-engineered substitutes for posterior lamellar eyelid reconstruction. We also shed light on future challenges and directions for eyelid regeneration strategies and offer perspectives on transitioning replacement strategies to regeneration strategies for eyelid reconstruction in the future.

This report describes the clinical features and management in a case of vernal keratoconjunctivitis (VKC) with bilateral tarsal conjunctival keratinization. A 32-year-old male presented with VKC since childhood that had exacerbated in the eight years prior to presentation. Examination revealed partial limbal stem cell deficiency in both eyes, with keratinization of the superior tarsal conjunctiva. The corresponding areas of the cornea exhibited punctate keratopathy in both eyes. To address this, the patient underwent excision of the conjunctival keratinization in both eyes. The resultant bare areas were covered with conjunctival autografts (CAGs). Postoperatively, the grafts were well apposed, and there was no recurrence of keratinization observed during the period of follow-up of four years. Resolution of corneal epitheliopathy was also noted. Although keratinization can occur in eyes with VKC, it is usually limited to the bulbar conjunctival areas. This is the first report of tarsal conjunctival keratinization in such cases. Milder cases may be observed or managed with scleral contact lenses. In more severe forms, there is associated corneal epitheliopathy, which may progress to corneal vascularization and scarring. Surgical excision of the lesion is recommended in these eyes. Following excision, several options exist to cover the bare area, which include a CAG, an amniotic membrane, or an oral mucous membrane. Of these, a CAG is an autologous tissue that can be harvested with a simple surgical technique and yields stable long-term results. Thus, tarsal conjunctival keratinization is a rare complication of chronic VKC. Excision of the lesion followed by a CAG is a viable approach for treatment, which reestablishes and maintains a stable ocular surface.

UNASSIGNED: : To evaluate the cost, safety, surgical outcome, and efficacy of modified Cutler-Beard eyelid reconstruction utilizing a novel silicone plate as a tarsal plate replacement in the repair of 60% to 100% eyelid defects following the excision of large malignant tumors.
UNASSIGNED: : A prospective, noncomparative, interventional study of 30 eyes was done over 3 years. Fourteen patients were female, and 16 patients were male. In all the cases, a silicone plate, the synthetic, artificial tarsal plate, was utilized for a total or subtotal replacement of the tarsal plate. The created defect was measured in mm (length and width) and later expressed in percentage. Pre- and postoperative action of levator palpebrae superioris (LPS) was measured. Pre- and postoperative measurements of the margin-to-margin reflex distance (MRD1) were noted.
UNASSIGNED: : Preoperative LPS action was 1.23 ± 1.35 mm, whereas postoperative LPS actions at the end of 1 week and 18 months were 11. 8 ± 0.88 mm and 13.53 ± 0. 73 mm, respectively. Preoperative MRD1 was - 3.0 ± 1.144 mm, whereas postoperative MRD1 values at the end of 1 week and 18 months were 2.18 ± 0.27 mm and 4.16 mm ± 0.35, respectively. The mean created defect after the removal of the tumor was 87.3% ±11.10. The mean length of the silicone plate implanted in this study was 27.53 ± 2.48 mm. The follow-up period for the study participants was 18 months.
UNASSIGNED: : The synthetic novel silicone plate was successful as a tarsal plate replacement. A second surgical site for ear cartilage harvesting is avoided. Cadaver transfer of Achilles tendon carries the risk of transmission of communicable diseases, for example, hepatitis B and HIV. Silicone is an inert, nonreacting, and tissue-tested material, thus eliminating the possibility of graft rejection. This material is readily available and cost-effective. The novel silicone plate is considered to be the most promising alternative material as a tarsal replacement in the future generation.

[This corrects the article DOI: 10.3389/fbioe.2020.00219.].

Tarsal plate regeneration has always been a challenge in the treatment of eyelid defects. The commonly used clinical treatments such as hard palate mucosa grafts cannot achieve satisfactory repair effects. Tissue engineering has been considered as a promising technology. However, tarsal plate tissue engineering is difficult to achieve due to its complex structure and lipid secretion function. Three-dimensional (3D) printing technology has played a revolutionary role in tissue engineering because it can fabricate complex scaffolds through computer aided design (CAD). In this study, it was novel in applying 3D printing technology to the fabrication of tarsal plate scaffolds using poly-caprolactone (PCL). The decellularized matrix of adipose-derived mesenchymal stromal cells (DMA) was coated on the surface of the scaffold, and its biofunction was further studied. Immortalized human SZ95 sebocytes were seeded on the scaffolds so that neutral lipids were secreted for replacing meibocytes. In vitro experiments revealed excellent biocompatibility of DMA-PCL scaffolds with sebocytes. In vivo experiments revealed excellent sebocytes proliferation on the DMA-PCL scaffolds. Meanwhile, sebocytes seeded on the scaffolds secreted abundant neutral lipid in vitro and in vivo. In conclusion, a 3D-printed PCL scaffold modified with DMA was found to be a promising substitute for tarsal plate tissue engineering.

Lid eversion is an essential component of contact lens aftercare. Hence, this study determined the best method of lid eversion based on three criteria: comfort, speed of administration and the area of the palpebral conjunctiva exposed.
Twenty-five participants (aged 20-34) had 6 different techniques applied in random order by the same clinician on two separate occasions: three involving a cotton bud placed on the extended upper eyelid either centrally, at the top of the tarsal plate or off-centre; one using the wooden end of the bud placed at the top of the tarsal plate; one using the clinician\'s index finger to evert the lid; and one using a silicone rubber, finger-shaped substitute. The participants judged the degree of discomfort of each technique on a visual analogue scale. The time to complete the task was timed with a stop-watch and the area of exposed palpebral conjunctiva was captured with a digital slit lamp and assessed using image analysis.
There was no difference between the initial lid eversion or subsequent repeat in terms of comfort (F = 0.304, p = 0.586), time to complete (F = 3.075, p = 0.092) or area exposed (F = 2.311, p = 0.142). Lid eversion using fingers alone or the silicone substitute everter were similar in comfort (p = 0.312), being the most comfortable methods, with off-centre cotton bud eversion or the wooden end of the cotton bud the least comfortable techniques (F = 17.480, p < 0.001). The quickest method to perform was the wooden end of the cotton bud, followed by the silicone everter (F = 17.522, p < 0.001). The area of exposed palpebral conjunctiva was greatest using the silicone everter (F = 28.199, p < 0.001).
Lid eversion had repeatable results, with the silicone everter placed at the top of the tarsal plate the most comfortable for the patient, quick to perform and exposed a greater area of tarsal plate than other techniques and therefore is recommended to clinicians.

The possible role of sex in the biosynthesis of lipids in the Meibomian glands (termed meibogenesis) remains unclear. To determine if there were any major sex-specific differences in the lipid composition of meibomian gland secretions (meibum) and gene expression patterns (GEP) related to meibogenesis, we conducted a study using healthy, age and diet-matched young adult wild-type C57BL/6J mice (2-2.5 month old). Tarsal plates (TP) were surgically excised from the eyelids of mice and subjected to transcriptomic and lipidomic analyses. The GEP were studied using mRNA microarrays. Lipids were extracted with organic solvents and analyzed using liquid chromatography and mass spectrometry. GEP in the TP of female and male mice demonstrated no statistically significant differences in the expression levels of the main protein-coding genes related to lipid metabolism and storage in general, and meibogenesis specifically (such as Elovl, Scd, Fads, Soat, Far, Awat, Acat, Lss, Dhcr, Hmgcr, Hmgcs, Dgat, Bckdh, Dbt, Fasn, and Plin, among others). The meibomian lipid profiles of female and male mice were virtually indistinguishable: all major lipids such as waxes, cholesteryl esters, cholesterol, (O)-acylated omega-hydroxy fatty acids (OAHFA), cholesteryl esters of OAHFA etc., were present in similar ratios. It seems that the major biosynthetic pathways in the Meibomian glands of male and female mice function in a similar fashion and produce secretions of the same overall chemical composition.

Transforming growth factor alpha (TGFα) belongs to the epidermal growth factor (EGF) family and is known to play an important role during eyelid morphogenesis. In this study, we showed that ectopic expression of TGFα in the stroma of Kera-rtTA/tet-O-TGFα bitransgenic mice results in precocious eye opening, abnormal morphogenesis of the meibomian gland, tendon and tarsal plate malformation and epithelium hyperplasia. TGFα did not change proliferation and differentiation of meibocytes, but promoted proliferation and inhibited differentiation of the tarsal plate tenocytes. These results suggest that proper formation of the tendon and tarsal plate in the mouse eyelid is required for normal morphogenesis of the meibomian gland.

OBJECTIVE: To determine cosmetic and functional outcome following lateral strip procedure (LSP) for involutional entropion.
METHODS: This study was a prospective analysis of 15 patients (20 eyelids) of involutional entropion, who needed surgical repair. After thorough evaluation, the surgical treatment (LSP) was done in all 15 patients.
RESULTS: Cosmetic and functional outcome was excellent in all cases following LSP. No complications and recurrence were encountered in any case.
CONCLUSIONS: LSP is simple, physiologic, easy and quick to perform as OPD procedure for involutional entropion under local anesthesia without hospitalization by a general ophthalmologist.

Eyelids are the protective mechanism of the eyes. The upper and lower eyelids have been formed for their specific functions by Nature. The eyelid defects are encountered in congenital anomalies, trauma, and postexcision for neoplasm. The reconstructions should be based on both functional and cosmetic aspects. The knowledge of the basic anatomy of the lids is a must. There are different techniques for reconstructing the upper eyelid, lower eyelid, and medial and lateral canthal areas. Many a times, the defects involve more than one area. For the reconstruction of the lid, the lining should be similar to the conjunctiva, a cover by skin and the middle layer to give firmness and support. It is important to understand the availability of various tissues for reconstruction. One layer should have the vascularity to support the other layer which can be a graft. A proper plan and execution of it is very important.