Microorganisms present on the surface of tobacco leaves play a significant role in shaping the composition of the tobacco microbial ecosystem, which undergoes continuous changes throughout the curing process. In the present study, a total of four distinct tobacco curing periods were selected for sampling, namely the fresh, yellowing, leaf-drying, and stem-drying stages. The bacterial 16S rRNA gene sequences of the collected samples were subsequently analyzed to identify operational taxonomic units (OTUs). The findings indicated that the complete dataset of leaf microbial samples was clustered, resulting in the identification of 1,783 operational taxonomic units (OTUs). Furthermore, the analysis of diversity revealed a pattern of initially increasing and subsequently decreasing community diversity. Redundancy Analysis (RDA) and weighted gene correlation networks for analysis (WGCNA) were employed in conjunction with environmental factors to assign OTUs to 22 modules for functional analysis. Additionally, a classification model utilizing the random forest algorithm was utilized to identify seven marker microorganisms (Escherichia coli, Faecalibacterium prausnitzii, Faecalibacterium, Escherichia-Shigella, Peptostreptococcaceae, Peptostreptococcales-Tissierellales, and Proteobacteria) that exhibited discriminative characteristics across different time periods. This study aimed to investigate the dynamic changes in the bacterial community throughout the curing process and their impact on the community\'s function. Additionally, certain bacteria were identified as potential markers for detecting changes in the curing stage. These findings offer a novel opportunity to accurately regulate the curing environment, thereby enhancing the overall quality of tobacco leaf curing.

Leaves harbor distinct microbial communities that can have an important impact on plant health and microbial ecosystems worldwide. Nevertheless, the ecological processes that shape the composition of leaf microbial communities remain unclear, with previous studies reporting contradictory results regarding the importance of bacterial dispersal versus host selection. This discrepancy could be driven in part because leaf microbiome studies typically consider the upper and lower leaf surfaces as a single entity despite these habitats possessing considerable anatomical differences. We characterized the composition of bacterial phyllosphere communities from the upper and lower leaf surfaces across 24 plant species. Leaf surface pH and stomatal density were found to shape phyllosphere community composition, and the underside of leaves had lower richness and higher abundances of core community members than upper leaf surfaces. We found fewer endemic bacteria on the upper leaf surfaces, suggesting that dispersal is more important in shaping these communities, with host selection being a more important force in microbiome assembly on lower leaf surfaces. Our study illustrates how changing the scale in which we observe microbial communities can impact our ability to resolve and predict microbial community assembly patterns on leaf surfaces. IMPORTANCE Leaves can harbor hundreds of different bacterial species that form unique communities for every plant species. Bacterial communities on leaves are really important because they can, for example, protect their host against plant diseases. Usually, bacteria from the whole leaf are considered when trying to understand these communities; however, this study shows that the upper and lower sides of a leaf have a very different impact on how these communities are shaped. It seems that the bacteria on the lower leaf side are more closely associated with the plant host, and communities on the upper leaf side are more impacted by immigrating bacteria. This can be really important when we want to treat, for example, crops in the field with beneficial bacteria or when trying to understand host-microbe interactions on the leaves.

Foliar fertilisation is an application technique that is increasingly being used in agriculture and offers the possibility of providing nutrients directly to the site of highest demand. Especially for phosphorus (P), foliar application is an interesting alternative to soil fertilisation, but foliar uptake mechanisms are poorly understood. To gain a better understanding of the importance of leaf surface features for foliar P uptake, we conducted a study with tomato (Solanum lycopersicum) and pepper (Capsicum annuum) plants, which have different leaf surface traits. For this purpose, drops of 200 mM KH2PO4 without surfactant were applied onto the adaxial or abaxial leaf side or to the leaf veins and the rate of foliar P absorption was evaluated after one day. Additionally, leaf surfaces were characterised in detail by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), estimating also leaf surface wettability and free energy, among other parameters. While the leaves of pepper hardly contained any trichomes, the abaxial side and the leaf veins of tomato leaves were densely covered with trichomes. The cuticle of tomato leaves was thin (approximately 50 nm), while that of pepper was thick (approximately 150-200 nm) and impregnated with lignin. Due to the fact that trichomes were most abundant in the leaf veins of tomato, dry foliar fertiliser drop residues were observed to be anchored there, and the highest P uptake occurred via tomato leaf veins, resulting in 62% increased P concentration. However, in pepper, the highest rate of P absorption was recorded after abaxial-side P treatment (+66% P). Our results provide evidence that different leaf parts contribute unequally to the absorption of foliar-applied agrochemicals, which could potentially be useful for optimising foliar spray treatments in different crops.

Foliar water uptake (FWU) has been documented in many species and is increasingly recognized as a non-trivial factor in plant-water relationships. However, it remains unknown whether FWU is a widespread phenomenon in Pinus species, and how it may relate to needle traits such as the form and structure of stomatal wax plugs. In this contribution, these questions were addressed by studying FWU in current-year and 1-year-old needles of seven Pinus species.
We monitored FWU gravimetrically and analysed the needle surface via cryo-scanning electron microscopy. Additionally, we considered the effect of artificial wax erosion by application of the surfactant Triton X-100, which is able to alter wax crystals.
The results show for all species that (1) FWU occurred, (2) FWU is higher in old needles compared to young needles and (3) there is substantial erosion of stomatal wax plugs in old needles. FWU was highest in Pinus canariensis, which has a thin stomatal wax plug. Surfactant treatment enhanced FWU.
The results of this study provide evidence for (1) widespread FWU in Pinus, (2) the influence of stomatal wax plugs on FWU and (3) age-related needle surface erosion.

The distribution of pentachlorophenol and 2,4-dichlorophenoxyacetic acid in conifer needles was studied following uptake from aqueous solutions for up to 21 h. Desorption kinetics revealed two compartments (C1 j and C2 ) in which organics were sorbed reversibly and one compartment (Cs ) from which organics could not be desorbed. Reversible sorption proceeded very rapidly (less than 1 h for equilibration) and was made up of sorption to the surfaces of cuticular waxes and sorption in waxes and cutin. C3 appears to be identical with the apoplast and the symplast of needles. Penetration into C3 proceeded slowly and remained steady up to 21 h (longer periods not tried). The distribution of organics between the three compartments varied with time of loading and depended on plant species and properties of solutes. Data are discussed in relation to methods of exposure monitoring.

Wetting of the upper leaf surface of Juglans regia L. and of model surfaces colonized by epiphytic micro-organisms was investigated by measuring contact angles of aqueous solutions buffered at different pH values. During June to October 1995, contact angles of aqueous solutions on the leaf surface of J. regia decreased by angles ranging from 12° (low pH values) to 25° at high pH values. At the end of this vegetation period, wetting was strongly dependent on pH showing significantly lower contact angles with alkaline solutions (pH 9·0) than with acidic solutions (pH 3·0). Contact angle titration measured angles on the leaf surface as a function of the pH of buffered aqueous solutions, covering a pH range from 3·0 to 11·0. Titration curves revealed inflection points around 7·5, indicating the existence of ionizable carboxylic groups at the interface of the phylloplane. Altered leaf-surface wetting properties observed on the intact leaf surface could be simulated in model experiments by measuring contact angles on artificial surfaces colonized by Pseudomonas fluorescens and by epiphytic micro-organisms isolated from the phylloplane of J. regia. Strong evidence is provided that interfacial carboxylic groups derive from epiphytic micro-organisms present on the phylloplane. Results suggest that the age-dependent increase in, and pH dependence of, wetting as leaves mature are related to the presence of epiphytic micro-organisms on the phylloplane. Ecological consequences of increased leaf-surface wetting, concerning the structure of the leaf surface as a microhabitat for epiphytic micro-organisms, are discussed.

Phosphorus (P) scarcity constrains plant growth in many ecosystems worldwide. In P-poor ecosystems, the biogeochemical paradigm links plant productivity with the deposition of P-rich dust originating from desert storms. However, dust P usually has low bioavailability and is thought to be utilized solely via roots. We applied desert dust on the leaf surface of P-deficient and P-sufficient wheat, chickpea and maize to test the feasibility of direct foliar uptake of dust-P and investigate its related acquisition mechanisms. Foliar dust doubled the growth of P-deficient chickpea and wheat, crops originating near the Syrian Desert. P deficiency stimulated several leaf modifications that enabled acquisition of up to 30% of the sparingly soluble dust-P that is conventionally perceived as unavailable. These modifications increased foliar dust capture, acidified the leaf surface and, in chickpea, enhanced exudation of P-solubilizing organic acids. Maize (originating far from deserts) displayed only a marginal response to dust. The dramatic response of chickpea and wheat in comparison to maize suggests that plants that evolved in dust-rich ecosystems adopted specialized utilization strategies. Interestingly, the abovementioned foliar responses are comparable to known P uptake root responses. Given that P limitation is almost universal, a foliar P uptake pathway will have significant ecological and agricultural implications.

Plants can absorb water through their leaf surfaces, a phenomenon commonly referred to as foliar water uptake (FWU). Despite the physiological importance of FWU, the pathways and mechanisms underlying the process are not well known. Using a novel experimental approach, we parsed out the contribution of the stomata and the cuticle to FWU in two species with Mediterranean (Prunus dulcis) and temperate (Pyrus communis) origin. The hydraulic parameters of FWU were derived by analysing mass and water potential changes of leaves placed in a fog chamber. Leaves were previously treated with abscisic acid to force stomata to remain closed, with fusicoccin to remain open, and with water (control). Leaves with open stomata rehydrated two times faster than leaves with closed stomata and attained approximately three times higher maximum fluxes and hydraulic conductance. Based on FWU rates, we propose that rehydration through stomata occurs primarily via diffusion of water vapour rather than in liquid form even when leaf surfaces are covered with a water film. We discuss the potential mechanisms of FWU and the significance of both stomatal and cuticular pathways for plant productivity and survival.

Nitrous acid (HONO) is of considerable interest because it is an important precursor of hydroxyl radicals (OH), a key species in atmospheric chemistry. HONO sources are still not well understood, and air quality models fail to predict OH as well as HONO mixing ratios. As there is little knowledge about the potential contribution of plant surfaces to HONO emission, this laboratory work investigated HONO formation by heterogeneous reaction of NO2 on Zea mays. Experiments were carried out in a flow tube reactor; HONO, NO2 and NO were measured online with a Long Path Absorption Photometer (LOPAP) and a NOx analyzer. Tests were performed on leaves under different conditions of relative humidity (5-58%), NO2 mixing ratio representing suburban to urban areas (10-80 ppbv), spectral irradiance (0-20 W m-2) and temperature (288-313 K). Additional tests on plant wax extracts from Zea mays leaves showed that this component can contribute to the observed HONO formation. Temperature and NO2 mixing ratios were the two environmental parameters that showed substantially increased HONO emissions from Zea mays leaves. The highest HONO emission rates on Zea mays leaves were observed at 313 K for 40 ppbv of NO2 and 40% RH and reached values of (5.6 ± 0.8) × 109 molecules cm-2 s-1. Assuming a mixing layer of 300 m, the HONO flux from Zea mays leaves was estimated to be 171 ± 23 pptv h-1 during summertime, which is comparable to what has been reported for soil surfaces.

Today, particulate-matter (PM) pollution has become one of the most severe air-pollution problems. As the most commonly used method in daily life, phytoremediation can use plant organs (such as leaves) as biological filters for pollutants to repair the atmosphere. At the same time, rainfall can remove PM from plant-leaf surfaces and enable them to adsorb PM again. By simulating natural rainfall, the rainfall characteristics are quantified as rainfall intensity and rainfall duration, and we use the washout-weighing method to obtain the amount of PM removed from the leaf surface. Then, use a scanner to scan the leaves after rain to get their images, and use Image J software to process the images to obtain leaf area. Finally, the amount of PM removed by rain per unit leaf area can be calculated. It will be used to explore the impact of different rainfall intensity and duration on the removal of PM from the leaf surface of wetland plants. The results showed that under three rainfall intensities used in this experiment, the removal of PM from plant-leaf surfaces all increased with an increase in rainfall duration. When the particle size is 10-100-μm, and the rainfall intensity is 30 mm/h, the removal amount of plant particles tested in this experiment is the largest. With increased rainfall duration, the removal of PM from plant-leaf surfaces increased sharply at first, then slowly, and finally tended to be stable. The removal efficiency of PM on the blade surface is most apparent at the early stage of rainfall, and then gradually weakens. Among the four wetland plants tested in this experiment, in the range of 10-100-μm, the number of PM on the leaf surface of Scirpus validus is the largest, and the optimum rainfall intensity is 30 mm/h; in the range of 2.5-10-μm, the number of PM on the leaf surface of Typha orientalis is the largest, and the optimal rainfall intensity is 30 mm/h; in the range of 0.45-2.5-μm, the number of PM on the leaf surface of Iris wilsonii is the largest, and the optimal rainfall intensity is 15 mm/h. Wetland species with high particle accumulation capacity can provide references for vegetation restoration of degraded wetland plants and plant cultivation in constructed wetlands. At the same time, the best rainfall intensity and duration for removing particulate matter on the surface of plant leaves were obtained through experiments, which provided a reference for the design of automatic plant irrigation systems and dust removers in different scenarios.