The purpose of this systematic review was to evaluate the effects of physiotherapeutic interventions on biomarkers of neuropathic pain in preclinical models of peripheral neuropathic pain (PNP). The search was performed in Pubmed, Web of Science, EMBASE, Cochrane, Cinhal, Psycinfo, Scopus, Medline, and Science Direct. Studies evaluating any type of physiotherapy intervention for PNP (systemic or traumatic) were included. Eighty-one articles were included in this review. The most common PNP model was chronic constriction injury, and the most frequently studied biomarkers were related to neuro-immune processes. Exercise therapy and Electro-acupuncture were the 2 most frequently studied physiotherapy interventions while acupuncture and joint mobilization were less frequently examined. Most physiotherapeutic interventions modulated the expression of biomarkers related to neuropathic pain. Whereas the results seem promising; they have to be considered with caution due to the high risk of bias of included studies and high heterogeneity of the type and anatomical localization of biomarkers reported. The review protocol is registered on PROSPERO (CRD42019142878). PERSPECTIVE: This article presents the current evidence about physiotherapeutic interventions on biomarkers of neuropathic pain in preclinical models of peripheral neuropathic pain. Existing findings are reviewed, and relevant data are provided on the effectiveness of each physiotherapeutic modality, as well as its certainty of evidence and clinical applicability.

BACKGROUND: As studies on ethnic disparities in metabolic syndrome and its risk factors in Taiwan are still rare, the aims of this study were: (1) to detect the differences in the rates of metabolic syndrome, obesity and health behaviors between two ethnic groups (indigenous Tsou and nonindigenous Han) living in the same area and with similar age and sex distributions; (2) to examine whether ethnicity per se plays a significant role in the occurrence of metabolic syndrome, while taking other risk factors including sociodemographic characteristics, obesity and health behaviors into consideration.
METHODS: This is a cross-sectional study using data from a community survey conducted in Chiayi County in southwestern Taiwan. A frequency matching strategy by age and sex with a ratio of 1 (Tsou) to 3 (Han) was applied to select a comparable sample between both ethnic groups (667 Tsou and 2001 Han) from among the survey participants. Furthermore, participants with cardiometabolic diseases diagnosed before the surveyed day were excluded to avoid confounding any associated risk factors for developing metabolic syndrome (MS). A final analytic sample of 1482 remained. The used information included sociodemographic characteristics, medical histories, health behaviors, and the concentrations of triglycerides, cholesterol, and glucose.
RESULTS: Indigenous Tsou had significantly higher rates of metabolic syndromes, obesity and unhealthy behaviors than their Han counterparts (MS: 54.0% vs. 29.1%, obesity: 54.0% vs. 23.2%, drinking alcohol: 17.5% vs. 13.6%, and higher intake of fried food: 6.4% vs. 4.4%), even though they were similar in age and sex distributions. The significant risk factors for subsequently developing MS included being indigenous Tsou (adjusted POR = 2.62, P < 0.001), older, single, and obese. Stratified analyses on the risk factors for developing MS by health behaviors and by obese problems also indicated increased risks of being indigenous Tsou.
CONCLUSIONS: There existed ethnic differences in the rates of metabolic syndrome, obesity, and health behaviors. Ethnicity per se did play a significant role in developing MS; in particular indigenous Tsou people had increased risks, suggesting possible biological reasons rooted in their origins that need further exploration. In addition, unhealthy behaviors may potentially have an indirect effect on developing MS via their effect on obesity.

Ligaments are dense fibrous connective tissue that maintains joint stability through bone-to-bone connections. Ligament tears that due to sports injury or tissue aging usually require surgical intervention, and transplanting autologous, allogeneic, or artificial ligaments for reconstruction is the gold standard for treating such diseases in spite of many drawbacks. With the development of materialogy and manufacturing technology, engineered ligament tissue based on bioscaffold is expected to become a new substitute, which can lead to tissue regeneration by simulating the structure, composition, and biomechanical properties of natural tissue. This paper reviewed some recently published in vitro and animal researches focusing on ligament tissue engineering, then evaluated the properties and the effects on tissue repair and reconstruction of fiber structure scaffolds, multi-phase interface scaffolds and bio-derived scaffolds designed by bionic principle and made of different materials, manufacturing techniques and biological factors. Finally, summarization followed by the prospection for future development direction of biological scaffolds in ligament tissue engineering research is given.
韧带是致密的纤维结缔组织，通过骨间连接维持关节的稳定性。运动损伤或组织老化引起的韧带撕裂通常需要手术干预，目前使用自体、异体或人工韧带作为移植物进行重建是治疗该类疾病的金标准，但这些移植物都存在诸多弊端。随着材料学和制造技术的发展，以生物支架为基础的工程化韧带组织有望成为新的组织供体，通过模拟天然组织的结构、成分和生物力学性能来达到再生组织的目的。本综述根据近期韧带组织工程的体外和动物实验研究，评估了以仿生性为设计原则，使用不同材料、制造技术和生物因素制造的纤维结构支架、多相界面支架和生物组织衍生支架的各项性能以及在促进韧带修复和重建中的效果。最后，总结并展望未来韧带组织工程研究中生物支架的发展方向。.

The effects of biological factors including dissolved oxygen (DO), pH, carbon/nitrogen (C/N) and hydraulic retention times (HRT) on the performance of simultaneous nitrification and denitrification (SND) in a moving bed sequencing batch reactor (MBSBR) were investigated. A low DO was found to be advantageous to the SND in that nitrification was not inhibited, while pH and C/N ratio were shown to have positive effects on SND, and HRT needed to be controlled in a suitable range. A desirable SND efficiency was obtained at a DO of 2.5 mg L-1, pH of approximately 8.0, C/N ratio of 10 and HRT of 10 h in the MBSBR. High-throughput sequencing analysis showed that different operating conditions impacted microbial communities, resulting in different nitrogen removal mechanisms. Autotrophic and heterotrophic nitrification together contributed to the good nitrification performance, while denitrification was conducted by combined anoxic and aerobic processes. Furthermore, the results of principal component analyses (PCA) and the abundance of the predominant nitrification and denitrification genera both showed that DO and HRT might be regarded as the dominant variable factors influencing community structure analysis during SND, while the linear discriminant analysis (LDA) effect size (LEfSe) algorithm showed differences in abundance among the biofilm microbial communities with different DO. Overall, the results of this study improve our understanding of the bacterial community structure with different operating conditions in MBSBRs.

BACKGROUND: The objective of this systematic review and meta-analysis was to analyze the periodontal behavior around teeth prepared with horizontal finishing crowns supporting fixed metal-ceramic and zirconia full coverage crowns and fixed partial dentures (FDPs).
METHODS: An electronic search was conducted to locate relevant clinical trials in four databases: PubMed, Embase, Cochrane, and Scopus. A manual search was made in the reference sections of the articles identified for any additional articles. No restrictions were applied regarding year of publication or language. The following variables were considered in quantitative and qualitative analysis: probing pocket depth (PPD); probing attachment level (PAL); plaque control record (PCR); bleeding on probing (BOP); and gingival margin migration.
RESULTS: Twenty articles were selected for qualitative synthesis, and of these, nine underwent meta-analysis. Higher PCR was found in control teeth, while BOP, PPD, and PAL were higher around teeth prepared with horizontal finishing lines supporting complete coverage crowns/FDPs Gingival migration results were the clearest manifestation of compromised periodontal health around teeth prepared with horizontal finishing lines.
CONCLUSIONS: Meta-analysis revealed that teeth prepared with horizontal finishing lines supporting crowns and FDPs present more periodontal disorders than untreated control teeth.

Cryopreservation is a useful approach to preserve male fertility for assisted reproduction technique and other evaluations. In spite of extensive development in the cryopreservation field, there are biological and biochemical points including DNA fragmentation and antioxidant which should be illuminated to preserve fertility in safe form. Several molecular markers such as coding and noncoding RNAs are transferred from spermatozoa into oocyte via fertilization. These biomarkers affect fertility potential during the cryopreservation. Despite its impact, sperm cryopreservation has some destructive effect including loss of sperm motility and viability, acrosomal damage, mitochondrial membrane depolarization, plasma membrane permeability alteration even nuclear, and DNA damage. There is a growing concern about the impact of sperm cryopreservation on biological factors which can interrupt successful fertility procedures such as in vitro fertilization. Additionally, cryo-damage can decrease embryonic development extent. Promoting cryopreservation method via investigating the wide range of non-invasive factors may be increasingly important to have access to safe approach of freezing. Therefore, the aim of this study is the assessment of biological factors which can penetrate the fertility potential during the freezing procedure, explicate innovative methods in fertility preservation.

Critical-size bone defects are a common clinical problem. The golden standard to treat these defects is autologous bone grafting. Besides the limitations of availability and co-morbidity, autografts have to be manually adapted to fit in the defect, which might result in a sub-optimal fit and impaired healing. Scaffolds with precise dimensions can be created using 3-dimensional (3D) printing, enabling the production of patient-specific, \'tailor-made\' bone substitutes with an exact fit. Calcium phosphate (CaP) is a popular material for bone tissue engineering due to its biocompatibility, osteoconductivity, and biodegradable properties. To enhance bone formation, a bioactive 3D-printed CaP scaffold can be created by combining the printed CaP scaffold with biological components such as growth factors and cytokines, e.g., vascular endothelial growth factor (VEGF), bone morphogenetic protein-2 (BMP-2), and interleukin-6 (IL-6). However, the 3D-printing of CaP with a biological component is challenging since production techniques often use high temperatures or aggressive chemicals, which hinders/inactivates the bioactivity of the incorporated biological components. Therefore, in our laboratory, we routinely perform extrusion-based 3D-printing with a biological binder at room temperature to create porous scaffolds for bone healing. In this method paper, we describe in detail a 3D-printing procedure for CaP paste with K-carrageenan as a biological binder.

Triatoma sherlocki Papa, Jurberg, Carcavallo, Cerqueira & Barata was described in 2002, based on specimens caught in the wild in the municipality of Gentio do Ouro, Bahia, Brazil. In 2009, nymphs and adults were detected inside homes and sylvatic specimens were positive for Trypanosoma cruzi (Chagas). No information on the bionomics of T. sherlocki exists, although such data are considered essential to estimate its vector and colonization potential in domestic environments. Herein, the biological cycle of T. sherlocki was studied based on 123 eggs, with nymphs and adults fed on Mus musculus (Linnaeus). Nymphal development time phases, number of meals consumed, and stage-specific mortality rates were analyzed. Survival time under starvation conditions was measured between ecdysis and death among 50 nymphs (first to fifth instar) and 50 male and female adults. The median development time from egg to adult was 621.0 (CI: 489-656) d. The number of meals consumed ranged from 1 to 20 for nymphs of the first to fifth instar. The fifth instar showed the greatest resistance to starvation, with a mean of 156.5 d. The high number of meals consumed by T. sherlocki favored infection with and transmission of T. cruzi. The full development of this species under laboratory conditions with a low mortality rate indicates that this vector presents biological characteristics that may contribute to its adaptation to artificial human ecotopes. Its high resistance to starvation emphasizes the importance of entomological surveillance for this species.

BACKGROUND: Our purpose in this study was to clarify whether differences in subject group attributes could affect data acquisition in proton magnetic resonance spectroscopy ((1)H-MRS).
METHODS: Subjects without diabetes mellitus (DM) were divided into two groups (group A, in their 20s; group B, 30-60 years old). Subjects with DM formed group C (30-60 years old). The numbers of subjects were 19, 27, and 22 for group A, B, and C respectively. For all subjects, (1)H-MRS measurements were taken of the soleus muscle (SOL) and the anterior tibial muscle (AT). We defined the success of the measurements by the detection of intramyocellular lipids. Moreover, we also measured the full width at half maximum of the water peaks for all subjects.
RESULTS: The success rate was significantly higher for the AT (100%) than for the SOL (81.6%) (P<0.01). For the SOL, the success rate was 100% in group A, 85.2% in group B, and 77.3% in group C. There was a significant difference (P<0.05) between groups A and B, as well as between groups A and C. In all subjects, there was a significant difference (P<0.01) in the full width at half maximum (Hz) of the water peak between the AT and SOL measurements.
CONCLUSIONS: We conclude that differences in the age and DM history of subjects could affect the probability of successful (1)H-MRS data acquisition.