The development of eco-friendly elastomeric materials has become an important issue in recent years. In this work, thermoplastic elastomer samples of an ethylene-norbornene copolymer (EN) with coffee and tea biofillers mixed with typical fillers such as montmorillonite (MMT), silica (SiO2), and cellulose were investigated. The aim of this research was to determine the effect of fillers on the properties of the materials and to assess their degradability after two ultraviolet (UV) aging cycles (200, 400 h). The scientific novelty of this work is the assessment of the anti-aging effect of simultaneous biofillers-stabilizers based on coffee and tea waste. The surfaces of the obtained polymer compositions were examined using infrared spectroscopy (FTIR-ATR). Contact angles were determined, and surface energy was calculated. The mechanical properties were tested, and the influence of plant fillers and aging on the color change in the materials was analyzed. The combination of coffee with silica, MMT, and cellulose fillers limited the migration of fatty acids and other compounds from the biofiller to the EN surface (FTIR analysis). Based on the aging coefficients K, it was shown that all coffee- and tea-based fillers stabilized the polymer compositions during UV aging (400 h). The results allowed the authors to determine the importance and impact of waste plant fillers on the degradability of the synthetic EN.

Nanotechnology has substantial potential for development due to its ability to modify surface characteristics and particle size, facilitating enhanced absorption of functional food compounds and controlled release of active substances to mitigate adverse effects. Nanoemulsion, a stable colloidal system formed by blending oil, emulsifier, and water, was identified as nanotechnology with promising applications. However, investigations into the impact of surfactants on characteristic nanoemulsions need to be more varied. This research gap necessitated further exploration in the advancement of nanotechnology-based foods. The parijoto fruit (Medinilla speciosa), an indigenous plant species in Indonesia, has yet to undergo extensive scrutiny for its potential use as a functional and nutraceutical food. Anthocyanins, a principal compound in the parijoto fruit, had exhibited efficacy in reducing the risk of cardiovascular disease diabetes, demonstrating anti-inflammatory and antioxidant properties. This study aimed to investigate the characteristics of nanoemulsion formulations derived from parijoto fruit extract and to evaluate an optimum condition with various tween surfactants. The findings from this investigation could furnish valuable insights for the further advancement of anthocyanin nanoemulsions from parijoto fruit extract. The results comprised the characterization of nanoemulsion particle size, polydispersity index, ζ-potential, conductivity, pH, and viscosity. Through mathematical modeling and statistical methods, RSM optimizes nanoemulsion by examining the relationships and interactions between independent and response variables. Furthermore, the characterization of nanoemulsion encompassed ζ-potential, polydispersity, particle size, conductivity, pH, and viscosity. Elevated surfactant concentrations resulted in diminished particle sizes and more uniform size distribution, albeit reaching a plateau where surfactant aggregation and micelle formation ensued. Increased concentrations of surfactant type, concentration, and parijoto extract impacted the physical characteristics of nanoparticle size and polydispersity. The optimal process conditions for nanoemulsion consisting of the type of Tween used are Tween 80, Tween concentration of 12%, and parijoto fruit extract concentration of 7.5%, yielding a desirability value of 0.74, categorizing it as moderate.

Dyes have conventionally been used in medicine for staining cells, tissues, and organelles. Since these compounds are also known as photosensitizers (PSs) which exhibit photoresponsivity upon photon illumination, there is a high desire towards formulating these molecules into nanoparticles (NPs) to achieve improved delivery efficiency and enhanced stability for novel imaging and therapeutic applications. Furthermore, it has been shown that some of the photophysical properties of these molecules can be altered upon NP formation thereby playing a major role in the outcome of their application. In this review, we primarily focus on introducing dye categories, their formulation strategies and how these strategies affect their photophysical properties in the context of photothermal and non-photothermal applications. More specifically, the most recent progress showing the potential of dye supramolecular assemblies in modalities such as photoacoustic and fluorescence imaging, photothermal and photodynamic therapies as well as their employment in photoablation as a novel modality will be outlined. Aside from their photophysical activity, we delve shortly into the emerging application of dyes as drug stabilizing agents where these molecules are used together with aggregator molecules to form stable nanoparticles.

The aim in this study was to develop and evaluate a nanofluconazole (FLZ) formulation with increased solubility and permeation rate using nanosuspensions. The FLZ nanosuspensions were stabilized using a variety of stabilizing agents and surfactants in various concentrations. The FLZ nanosuspension was characterized in vitro using particle size, zeta potential, X-ray powder diffraction (XRPD), and solubility. In addition, the ex vivo ocular permeation of FLZ through a goat cornea was analyzed. The results showed that the particle size of all nanosuspension formulations was in the nanometer range from 174.5 ± 1.9 to 720.2 ± 4.77 nm; that of the untreated drug was 18.34 μm. The zeta potential values were acceptable, which indicated suitable stability for formulations. The solubility of the nanosuspensions was up to 5.7-fold higher compared with that of the untreated drug. The results of the ex vivo ocular diffusion of the FLZ nanosuspensions showed the percentage of FLZ penetrating via the goat cornea increased after using Kollicoat to stabilize the nanosuspension formulation. Consequently, when using a nanosuspension formulation of Kollicoat, the antifungal activity of the drug strengthens.

The modulation of protein-protein interactions with small molecules is one of the most rapidly developing areas in drug discovery. In this review, we discuss advances over the past decade (2014-2023) focusing on molecular glues (MGs)-monovalent small molecules that induce proximity, either by stabilizing native interactions or by inducing neomorphic interactions. We include both serendipitous and rational discoveries and describe the different approaches that were used to identify them. We classify the compounds in three main categories: degradative MGs, non-degradative MGs or PPI stabilizers, and MGs that induce self-association. Diverse, illustrative examples with structural data are described in detail, emphasizing the elements of molecular recognition and cooperative binding at the interface that are fundamental for a MG mechanism of action.

This research aimed to develop miconazole-based microemulsions using oleic acid as a natural lipophilic phase and a stabilizer mixture comprising Tween 20 and PEG 400 to solubilize miconazole as an antifungal agent known for its activity in oral candidiasis and to improve its bioavailability. The formulation and preparation process was combined with a mathematical approach using a 23-full factorial plan. Fluid and gel-like microemulsions were obtained and analyzed considering pH, conductivity, and refractive index, followed by extensive analyses focused on droplet size, zeta potential, rheological behavior, and goniometry. In vitro release tests were performed to assess their biopharmaceutical characteristics. Independent variables coded X1-Oleic acid (%, w/w), X2-Tween 20 (%, w/w), and X3-PEG 400 (%, w/w) were analyzed in relationship with three main outputs like mean droplet size, work of adhesion, and diffusion coefficient by combining statistical tools with response surface methodology. The microemulsion containing miconazole base-2%, oleic acid-5%, Tween 20-40%, PEG 400-20%, and water-33% exhibited a mean droplet size of 119.6 nm, a work of adhesion of 71.98 mN/m, a diffusion coefficient of 2.11·10-5 cm2/s, and together with remarked attributes of two gel-like systems formulated with higher oil concentrations, modeled the final optimization step of microemulsions as potential systems for buccal delivery.

The emulsion forming and stabilizing capacities of water-soluble biopolymers originating from the aqueous (serum) phase of heat-treated and high pressure homogenized purées were investigated. The serum biopolymers were characterized and then utilized as emulsifier/stabilizer in simple oil-in-water emulsions. The resulting emulsions were stored at 4 °C and monitored for 2 weeks. Results revealed that carrot and tomato sera contained higher amounts of pectin and lower protein compared to broccoli. The serum pectic biopolymers exhibited distinct molecular structures, depending on the vegetable origin. Given these natural biopolymer composition and characteristics, emulsions with small droplet sizes were observed at pH 3.5. However, emulsions at pH 6.0 showed large mean droplet sizes, except for the emulsion formulated with carrot serum. Regardless of the pH, emulsions containing carrot serum biopolymers exhibited high capacity to form fine emulsions that were stable during the 2-week storage period at low temperature. This study clearly shows the capacity of natural water-soluble biopolymers isolated from the serum phase of vegetable purées to form fine emulsion droplets and maintain its stability during storage, especially in the case of carrot serum biopolymers.

Phytochemicals, such as resveratrol, curcumin, and quercetin, have many benefits for health, but most of them have a low bioavailability due to their poor water solubility and stability, quick metabolism, and clearance, which restricts the scope of their potential applications. To overcome these issues, different types of nanoparticles (NPs), especially biocompatible and biodegradable NPs, have been developed. NPs can carry phytochemicals and increase their solubility, stability, target specificity, and oral bioavailability. However, NPs are prone to irreversible aggregation, which leads to NP instability and loss of functions. To remedy this shortcoming, stabilizers like polymers and surfactants are incorporated on NPs. Stabilizers not only increase the stability of NPs, but also improve their characteristics. The current review focused on discussing the state of the art in research on synthesizing phytochemical-based NPs and their commonly employed stabilizers. Furthermore, stabilizers in these NPs were also discussed in terms of their applications, effects, and underlying mechanisms. This review aimed to provide more references for developing stabilizers and NPs for future research.

The aim of this study is to formulate polymeric paclitaxel nanoparticles with various stabilizers to improve solubility, enhance stability, maximize therapeutic efficacy and minimize detrimental toxicities of paclitaxel. In this study, trastuzumab-guided poly lactic-co-glycolic acid (PLGA)-loaded paclitaxel nanoparticles were formulated with pluronic F-127, polyvinyl alcohol (PVA), poloxamer 407, Tween-80, span 20, sodium dodecyl sulfate (SDS), and sodium lauryl sulfate (SLS) at different concentrations (0.5, 1, 1.5 and 2%) using the solvent evaporation method. The nanoparticles were evaluated for physicochemical characteristics and short and long-term stability. The optimum particle size (190 nm ± 12.42 to 350 nm ± 11.1), PDI (0.13 ± 0.02 to 0.2 ± 0.01), surface charge (-19.1mv ± 1.5 to -40.4mv ± 1.6), drug loading (2.43 to 9.5 %) and encapsulation efficiency (greater than 80 %) were obtained with these stabilizers while keeping the polymer concentration, temperature, probe size, amplitude and sonication time constant. The nanoformulations were stably stored at 4 °C. The nanoformulations of paclitaxel with pluronic F-127, polyvinyl alcohol (PVA), and poloxamer 407 were found to be more soluble, stable, uniform in physicochemical properties, and efficient in drug loading and encapsulation for improved therapeutic effects.

Self-assembled short peptides have intrigued scientists due to the convenience of synthesis, good biocompatibility, low toxicity, inherent biodegradability and fast response to change in the physiological environment. Therefore, it is necessary to present a comprehensive summary of the recent advances in the last decade regarding the construction, route of administration and application of self-assembled short peptides based on the knowledge on their unique and specific ability of self-assembly. Herein, we firstly explored the molecular mechanisms of self-assembly of short peptides, such as non-modified amino acids, as well as Fmoc-modified, N-functionalized, and C-functionalized peptides. Next, cell penetration, fusion, and peptide targeting in peptide-based drug delivery were characterized. Then, the common administration routes and the potential pharmaceutical applications (drug delivery, antibacterial activity, stabilizers, imaging agents, and applications in bioengineering) of peptide drugs were respectively summarized. Last but not least, some general conclusions and future perspectives in the relevant fields were briefly listed. Although with certain challenges, great opportunities are offered by self-assembled short peptides to the fascinating area of drug development.