Incorporating iron tailings (ITs) into asphalt represents a new method for waste-to-resource conversion. The objective of this study is to evaluate the fatigue performance of ITs as fillers in asphalt mastic and investigate the interaction and interfacial adhesion energy between asphalt and ITs. To achieve that, the particle size distributions of two ITs and limestone filler (LF) were tested through a laser particle size analyzer; the morphology and structure characteristics were obtained by scanning electronic microscopy (SEM), the mineral compositions were conducted through X-ray diffraction (XRD), and the chemical compositions were tested through X-ray Fluorescence Spectrometer (XRF). Furthermore, the fatigue properties of asphalt mastic and the interaction between asphalt binder and mineral fillers (ITs and LFs) were evaluated by Dynamic Shear Rheometer (DSR). The interfacial adhesion energy between ITs and asphalt binder were calculated through molecular dynamics simulation. In the end, the correlation between the test results and the fatigue life is established based on the gray correlation analysis, the environmental and economic benefits of iron tailings asphalt pavement are further evaluated. The results show that the particle size distribution of ITs is concentrated between 30 μm and 150 μm, and the main component is quartz. ITs have rich angularity and a higher interaction ability with asphalt. The adhesion energy of iron tailings filler to asphalt is less than that of limestone. The correlation degree of the interfacial adhesion energy and interaction between asphalt and mineral filler with asphalt mastic fatigue life is close to 0.58. Under the combined action of interaction ability and interfacial adhesion energy, the fatigue life of IT asphalt mastic meets the requirements. ITs as a partial replacement for mineral fillers in asphalt pavement have great environmental and social effectiveness.

A specific mortar material (abbreviated as RFT) was designed from industrial solid wastes, such as red mud, fly ash, and iron tailings. It was mainly developed for 3D printing in this work. Mechanical properties, microstructure and heavy metal leaching properties were discussed. The RFT composed of 15% red mud, 45% iron tailings, 9% fly ash, 30% cement, and 1% FDN water reducing agent attained good mechanical properties. Hydration products including Ca(OH)2, ettringite and C-S-H gel were found in RFT through SEM observation. Iron tailings mainly acted as fine aggregates in RFT, and they were wrapped by the C-S-H gels, producing a strong bonding effect between aggregates and cementitious matrix. The leaching toxicity test results proved that the developed RFT mortar materials were environmentally acceptable. Finally, RFT was subjected to a 3D printing test to verify its feasibility as 3D printable construction material.

Iron tailings matrix is deficient in nutrients, and phytoremediation is one of the effective methods to improve tailings nutrients. The response of phytoremediation to tailings microorganisms remains to be studied. The present study analyzed rhizospheric soil of two kinds of plants bacterial diversity and community structure and their relationship with soil environmental factors. The results indicate that the rhizospheric soil bacteria species of Robinia pseudoacacia and Juniperus sabina were not significantly different from that of bare tailings, but rhizospheric soil bacterial community compositions and abundance were significantly different from that of bare tailings. Canonical correlation analysis (CCA) showed that soil alkali-hydrolyzable nitrogen (AN), soil total nitrogen (TN), and soil organic matter (SOM) were the main environmental factors affecting bacterial community diversity. Spearman\'s correlation analysis showed that AN, TN, and SOM were significantly positively correlated with the relative abundance of Gemmatimonadetes and Nitrospirae, and were significantly negatively correlated with that of Firmicutes, Fusobacteria, and Bacteroidetes. FAPROTAX function prediction showed that the functional microbial communities of rhizospheric soil of the two plants were significantly different from those of bare tailings. Overall, the findings support an increase of microbial diversity, SOM, and nitrogen in rhizospheric soil of revegetated tailings compared to bare tailings. These results provide theoretical support for the development and application of phytoremediation in abandoned mines.

Iron ore tailings (IOTs) are gradually used as building materials to solve the severe ecological and environmental problems caused by their massive accumulation. However, the bulk density of IOT as aggregate is too large, which seriously affects the concrete properties. Therefore, in this paper, the effect of hydroxypropyl methylcellulose (HPMC) on the workability, mechanical properties, and durability of concrete prepared from IOT recycled aggregate was studied. The action mechanism of HPMC on the workability and the mechanical properties of the IOT concrete was analyzed by mercury intrusion porosimetry (MIP) and scanning electron microscope (SEM). The results show that HPMC can effectively improve the segregation problem caused by the sinking and air entrainment of IOT aggregate and improve the crack resistance of concrete with little effect on its compressive strength and electric flux. These results are due to the air-entraining thickening effect of HPMC, which improves the slurry viscosity, hinders the sinking of aggregate, and improves the workability. At the same time, HPMC film, after concrete hardening, will bridge the slurry and aggregate through physical and chemical effects, hinder the propagation of microcracks, and improve the crack resistance.

Agricultural arsenic (As, CAS. No. 7440-38-2) over the issue of pollution has been related to people\'s livelihood, security and moderate use of As contaminated soil is an important aspect of contaminated soil remediation. In this potted plant experiment, synergistic effects of arbuscular mycorrhizal fungi (AMF) Funneliformis mosseae and iron (Fe, CAS. No. 7439-89-6) oxides on plant growth and phosphorus (P, CAS. No. 7723-14-0), As and Fe uptake by maize (Zea mays L.) were studied on simulating medium As-polluted soils in greenhouse. Different amounts (0, 5, 10, 20, 40 g kg- 1) of iron tailings (IT) were added. The results showed that IT20 and IT40 addition significantly increased mycorrhizal infection rate, plant biomass, root length and P, Fe uptake under FM treatment; IT40 addition decreased As concentration in roots. In addition, FM inoculation increased biomass, root length and P uptake by shoots, but decreased Fe and As concentration in shoots. Therefore, the combined FM inoculation and IT40 addition promoted maize growth and decreased As concentration in shoots by decreasing As absorption efficiency, increasing P and Fe uptake and P/As ratio.

Recycling iron tailings is significant for environmental security and resource recovery, as they contain iron-rich minerals. Given the complex composition of iron minerals and the low grade of iron present in the tailings, innovative suspension roasting-magnetic separation (SRMS) technology was proposed to treat iron tailings that would separate out the iron minerals for recovery. In this study, the reduction kinetics, phase transformation, and structure evolution of the iron tailings were investigated to explain the mechanism behind magnetite production from iron tailings. These studies were conducted using chemical analyses, X-ray diffraction, Brunauer-Emmett-Teller specific surface area, and scanning electron microscopy. The results showed that high temperatures during the suspension reduction process were conducive to improving the reduction rate of the iron tailings. The best kinetics model for this reduction reaction of iron tailings is the P1 model, which demonstrated a linear increase in the conversion degree with the extension of the reaction time. The corresponding mechanism function was f(α) = 1, the apparent activation energy (Eα) was 51.56 kJ/mol, and the kinetics equation was k = 3.14exp(- 51.56/RT). Using the SRMS technology, magnetite gradually formed from hematite, starting at the outer particle layers and moving inward toward the core. The microcracks and pores in the surface of the particles increased, which promoted CO penetration into the particles where it reacted with the hematite. Our results provide important insight into the efficient and clean recycling of iron tailings.

Northwest China is abundant in iron ore reserves and has become one of the important iron ore mining bases in China. However, the contamination and microbial community structure of iron tailing ponds in Northwest China have not been extensively investigated. In the present study, we characterized the main physicochemical properties, the multiple heavy metal contamination, and the bacterial community structure of the soils surrounding an iron tailing pond in Linze County, Zhangye city, Gansu Province. The tailing-associated soils were barren, exhibiting alkaline pH and low organic matter (OM), total nitrogen (TN) and total potassium (TK) compared with the control areas. There was considerable multiple heavy metal pollution in the iron tailing pond, mainly including lead (Pb), manganese (Mn), arsenic (As), cadmium (Cd), zinc (Zn), iron (Fe) and copper (Cu). Among the 303 identified core operational taxonomic units (OTUs), Actinobacteria, Proteobacteria and Deinococcus-Thermus were predominant at the phylum level, and Blastococcus, Arthrobacter, Marmoricola, Kocuria, Truepera, and Sphingomonadaceae were prevalent at a finer taxonomic level. The bacterial richness and diversity of the tailing samples were significantly lower than those of the reference samples. RDA, VPA and Spearman correlation analyses showed that the soil pH, CEC, OM, TP, TK, Cd, Pb, Ni, Zn, As and Mn had significant effects on the bacterial community composition and distribution. This work profiles the basic features of the soil physicochemical properties, the multiple heavy metal contamination and the bacterial community structure in an iron tailing pond in Northwest China, thereby providing a foundation for the future ecological remediation of the iron tailing environment in the area.

Iron tailings are fine, stable and complex materials, which are mainly composed of minerals and metal oxides. Residual silicon in iron tailings can be used to prepare mesoporous silica materials applied to energy storage, environmental protection and other fields. This paper reported a novel synthesis strategy from iron tailings to high-surface area hexagonally ordered mesoporous silica materials in an innovative non-hydrothermal system at room temperature. A pretreatment process involving acid leaching and hydrothermal alkaline reaction was vital to the successful utilization of iron tailings. X-ray fluorescence (XRF) data suggested that about 95% of the silicon of iron tailings changed to the silicate as a silicon source. The samples were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), N2-adsorption-desorption isotherms, Fourier transform infrared (FTIR) spectroscopy, Thermogravimetry and differential scanning calorimetry (TG-DSC) and 29Si solid-state nuclear magnetic resonance (NMR) spectroscopy. The SAXRD patterns of mesoporous silica materials exhibited an intense (100) diffraction peak and two weak (110, 200) diffraction peaks, corresponding to characteristic of the ordered mesoporous lattice. TEM images further confirmed the hexagonally ordered porous structure of mesoporous silica materials. The WAXRD patterns and 29Si MAS NMR spectra of the samples indicated that mesoporous silica materials were composed of amorphous SiO2. The obtained mesoporous silica materials had a high surface area of 1915 m2/g and pore volume of 1.32 cm3/g. Furthermore, the evolution from iron tailings to mesoporous silica materials was elucidated and a proposed synthesis mechanism was discussed. Collectively, these results provided an insight into efficient recycling of iron tailings and the production of advanced functional materials from solid waste.