BACKGROUND: This study\'s purpose was to evaluate the biomechanical performance of plate-nail and dual-plate fixation for the treatment of AO/OTA 41-C2 tibial plateau fractures.
METHODS: Twenty synthetic tibias were selected and randomly divided into a plate-nail group (n = 10) and a dual-plate group (n = 10). After the artificial tibias were osteotomized to simulate AO/OTA 41-C2 tibial plateau fractures in both groups, the plate-nail and the dual-plate methods, respectively, were used for fixation, and then axial compression loading, three-point bending, torsion, and axial failure tests were carried out. The data of each group were recorded and statistically analyzed.
RESULTS: In the axial compression test, the average stiffness of the plate-nail group was higher than that of the dual-plate group (p < 0.05). The displacement generated in the plate-nail group was significantly smaller than that in the dual-plate group (p < 0.05). In the resisting varus test, the stress of the plate-nail group was significantly higher than that of the dual-plate group (p < 0.05). In the resisting valgus test, the stress of the plate-nail group was slightly higher than that of the dual-plate group, but the difference was not statistically significant (p > 0.05). In the static torsion test, the load applied to the plate-nail group was smaller than that of the dual-plate group when rotated to 5° (p < 0.05). In the axial compression failure test, the average ultimate load of the plate-nail group was significantly higher than that of the dual-plate group (p < 0.05).
CONCLUSIONS: The treatment of AO/OTA 41-C2 tibial plateau fractures with plate-nail fixation is superior to that with dual-plate fixation in resisting axial stress and preventing tibial varus deformity, while dual-plate fixation has better resisting torsional ability.

UNASSIGNED: To compare the effectiveness of open reduction and hook plate fixation versus closed indirect reduction and dorsal extension blocking Kirschner wire fixation for bony mallet fingers.
UNASSIGNED: The clinical data of 68 patients with bony mallet finger who admitted between May 2019 and June 2022 were retrospectively analyzed. Among them, 33 cases were in the open group (treated with open reduction and hook plate fixation) and 35 cases were in the closed group (treated with closed indirect reduction and dorsal extension blocking Kirschner wire fixation). There was no significant difference between the two groups in terms of gender, age, the affected side, the affected finger, cause of injury, time from injury to operation, and Wehbé-Schneider classification ( P>0.05). The operation time, intraoperative fluoroscopy frequency, fracture healing time, time of returning to work, and postoperative complications were recorded and compared between the two groups. At 12 months after operation, visual analogue scale (VAS) score was used to assess the pain of the injured finger, active flexion range of motion and extension deficit of the distal interphalangeal joint (DIP) were measured by goniometer, and the effectiveness was assessed by Crawford criteria.
UNASSIGNED: All patients in the two groups were followed up 12-26 months, with an average of 15 months. There was no significant difference in the follow-up time between the closed group and the open group ( P>0.05). The operation time in the closed group was shorter than that in the open group, and the intraoperative fluoroscopy times, the fracture healing time, and the time of returning to work in the closed group were more than those in the open group, and the differences were significant ( P<0.05). In the closed group, there were 5 cases of pinning tract infection and 3 cases of small area pressure ulcer skin necrosis on the dorsal side of the finger, which were cured after intensive nursing and dressing change. Local nail depression deformity occurred in 7 cases in the open group, and the deformity disappeared after removal of plate. The incisions of the other patients healed uneventfully without complications such as infection, skin necrosis, exposure of the internal fixation, or nail deformity. There was no significant difference in the incidence of skin necrosis between the two groups ( P>0.05), but the differences in the incidence of infection and nail deformity between the two groups were significant ( P<0.05). There was no significant difference in VAS score, DIP active flexion range of motion, DIP extension deficiency, or Crawford criteria evaluation between the two groups at 12 months after operation ( P>0.05). At last follow-up, there was no DIP osteoarthritis and joint degeneration in both groups.
UNASSIGNED: Open reduction and hook plate fixation versus closed indirect reduction and dorsal extension blocking Kirschner wire fixation have their own advantages and disadvantages, but both of them have good results in the treatment of bony mallet fingers. Open reduction and hook plate fixation is recommended for young patients with bony mallet fingers who are eager to return to work.
UNASSIGNED: 比较切开复位钩状钢板固定与闭合间接复位背侧伸直阻挡克氏针固定治疗骨性锤状指的临床疗效。.
UNASSIGNED: 回顾分析 2019年5月—2022年6月收治且符合选择标准的68例骨性锤状指患者临床资料。其中切开组33例（采用切开复位钩状钢板固定），闭合组35例（采用闭合间接复位背侧伸直阻挡克氏针固定治疗）。两组患者性别、年龄、患侧侧别、伤指指别、致伤原因、受伤至手术时间及Wehbé-Schneider分型比较差异均无统计学意义（ P>0.05）。记录并比较两组患者手术时间、术中透视次数、骨折愈合时间、返岗工作时间及并发症发生情况；术后12个月采用疼痛视觉模拟评分（VAS）评定伤指疼痛情况，量角器测量手指远侧指间关节（distal interphalangeal joint，DIP）主动屈曲活动度及伸直欠缺度，采用Crawford标准评定临床疗效。.
UNASSIGNED: 两组患者均获随访，随访时间12～26个月，平均15个月；闭合组和切开组随访时间比较差异无统计学意义（ P>0.05）。闭合组手术时间短于切开组，术中透视次数、骨折愈合时间及返岗工作时间均多于切开组，差异均有统计学意义（ P<0.05）。闭合组发生针道感染5例、末节指背侧皮肤小面积压疮坏死3例，经加强护理换药后痊愈；切开组发生7例指甲局部凹陷畸形，拆除内固定钢板后畸形消失；其余患者切口均顺利愈合，无感染、皮肤坏死、内固定物外露、指甲畸形等并发症发生。两组患者皮肤坏死发生率比较差异无统计学意义（ P>0.05），感染和指甲畸形发生率比较差异有统计学意义（ P<0.05）。术后12个月，两组VAS评分、DIP主动屈曲活动度、DIP伸直欠缺度及Crawford标准评价比较差异均无统计学意义（ P>0.05）。 末次随访时两组患者均无DIP骨关节炎及关节退行性改变发生。.
UNASSIGNED: 切开复位钩状钢板固定与闭合间接复位背侧伸直阻挡克氏针固定治疗骨性锤状指虽各有利弊，但均取得了较好治疗效果；对于急于重返工作岗位的年轻骨性锤状指患者建议采用切开复位钩状钢板固定。.

UNASSIGNED: This study aims to analyze the biomechanical characteristics of posterolateral plateau fractures fixed by a novel anatomical plate using finite element analysis.
UNASSIGNED: A three-dimensional digital model of the full length of right tibiofibula was obtained by CT scanning. A posterolateral tibial plateau fracture model was then created. The acquired fracture model was assembled with 4 groups of internal fixations: Group A, novel anatomical plate; Group B, straight buttress plate; Group C, oblique T-shaped locking plate; Group D, two lag screws. Axial loads of 500, 1,000 and 1,500 N perpendicular to the horizontal plane were used to simulate the stress on the lateral plateau of a 65 kg person standing, walking and fast running.
UNASSIGNED: Vertical displacements of the posterolateral fragments in each of the four groups gradually increased under loads from 500 N to 1,500 N. The maximum displacement of the fracture fragment in four groups were all located on the lateral side of the proximal part, and the displacement gradually decreased from the proximal part to the distal end. The maximum displacement values under the axial load of 1,500 N was in the following order: novel anatomical plate (1.2365 mm) < oblique T-shaped locking plate (1.314 mm) < two lag screws (1.3747 mm) < straight buttress plate (1.3932 mm). As the axial load increased, the stress value of the different internal fixation models gradually increased. The stress behavior of the same internal fixation model under different loads was similar. The maximum stress value under the axial load of 1,500 N was in the following order: novel anatomical plate (114.63 MPa) < oblique T-shaped locking plate (277.17 MPa) < two lag screws (236.75 MPa) < straight buttress plate (136.2 MPa).
UNASSIGNED: The patients with posterolateral plateau fractures fixed with a novel anatomical plate in standing, walking and fast running can achieve satisfactory biomechanical results, which lays the foundation for future applications. At the same time, clinical fracture types are often diverse and accompanied by damage to the soft tissue. Therefore, the ideal surgical approach and appropriate internal fixation must be selected based on the patient\'s injury condition.

OBJECTIVE: The treatment of talar neck and/or body fractures is known to be difficult and challenging, with significant impact on the long-term functional outcome for the patient. The optimal management, including the choice of surgical approaches and implants, are still under constant discussion. The purpose of the study was to investigate the clinical effects of lateral mini-plate combined with medial lag screws for the treatment of complicated central talar fractures.
METHODS: The data of eight patients with complex central talus fractures treated between June 2019 and January 2021 were retrospectively analyzed. There were six males and two females, ranging in age from 15 to 66 years, with an average age of 37.4 years. There were three cases on the left and five cases on the right. All fractures were comminuted, including talar neck with talar body fracture in seven cases and talar body comminuted with subluxation of subtalar joint in one case. All patients were treated with the anteromedial combined anterolateral approach, lateral talar mini-plate fixation and medial lag screw fixation. Fracture reduction quality, union time, and complications were recorded, and functional outcomes were evaluated using the American Orthopedic Foot & Ankle Society (AOFAS) scoring system.
RESULTS: The time from injury to surgery was 1-6 days, with an average of 3.38 days. The follow-up period was 34-53 months (mean 44.88 months). All fractures healed with a mean healing time of 16.75 weeks (13-23 weeks). Anatomical reduction was observed in six cases and near in two cases. After operation, there was no loosening or breakage of implant, loss of fracture reduction, and irritation of skin and soft tissue by internal fixation. The average AOFAS score was 87.38 (48-100), with excellent five cases, good two cases and poor one case, and the excellent and good rate was 87.5%. Superficial skin necrosis in one surgical incision healed after dressing exchange. No deep infection occurred. One case (1/8, 12.5%) developed avascular necrosis of the talus without collapse. Posttraumatic arthritis was found in four cases (4/8, 50%).
CONCLUSIONS: The utilization of lateral mini-plates in combination with medial screws for treating complex central talar fractures results in satisfactory reduction and stable fixation, mitigating complications associated with poor reduction. However, due to the absence of an anatomical mini-plate, pre-contouring is necessary when applying the lateral plate. This demands a surgeon\'s thorough familiarity with the anatomical morphology of the talus and proficiency in surgical techniques. Posttraumatic arthritis is the most common complication of complex central talar fractures.

UNASSIGNED: Elastic stable intramedullary nailing (ESIN) and plates are currently the main internal fixation for treating Pediatric Diaphyseal Femur Fractures (PDFF), and the optimal choice of internal fixation is controversial. The purpose of this meta-analysis is to compare the surgical outcomes and complications of the two fixation methods.
UNASSIGNED: MEDLINE, Embase, and the Cochrane Library were systematically searched for studies published up to March, 2023, that compared ESIN and plate fixation techniques for treating PDFF. Pooled analysis identified differences in surgical outcomes between ESIN and plate, mainly regarding surgical outcomes and postoperative complications, such as time at surgery, fracture healing time, blood loss and related complications.
UNASSIGNED: We included 10 studies with 775 patients with PDFF in our review. Of these, 428 and 347 were treated with ESIN and Plate, respectively. In terms of postoperative complications, ESIN led to a shorter surgery time [MD = - 28.93, 95% CI (- 52.88 to - 4.98), P < 0.05], less blood loss [MD = - 66.94, 95% CI (- 87.79 to - 46.10), P < 0.001] and more fracture healing time [MD = 2.65, 95% CI (1.22-4.07), P < 0.001]. In terms of postoperative complications, ESIN led to fewer fections (RR = 0.77, 95% CI 0.37, 1.60, P = 0.48), fewer angulation deformities (RR = 0.80, 95% CI 0.35, 1.83, P = 0.60) and more prominent implants (RR = 3.36, 95% CI 1.88, 6.01, P < 0.001), more delayed unions (RR = 4.06, 95% CI 0.71, 23.06, P = 0.11).
UNASSIGNED: ESIN and Plate have similar rates of complications besides a prominent implant rate, while ESIN has a shorter period of operation and less intraoperative bleeding. Although both options are suitable, the results of this study support the use of ESIN rather than plates in the treatment of PDFF in terms of complication rates. In clinical applications, surgeons should choose the appropriate treatment method according to the actual situation.

The objective of this study is to compare the clinical efficacy of percutaneous cannulated screw fixation and traditional plate internal fixation in the treatment of Sanders II and III calcaneal fractures. The records of 64 patients were retrospectively analyzed. Thirty-three cases were fixed by percutaneous cannulated screws. Thirty-one cases were fixed with traditional steel plates. The preoperative preparation time of the screw group and plate group was 3 ± 1.7 days and 4.6 ± 2.1 days. The surgery time was 118.9 ± 43.8 minutes and 146.9 ± 47.6 minutes. The length of hospitalization was 8.7 ± 3.9 days and 17.0 ± 7.9 days. Intraoperative blood loss was 38.2 ± 27.7 mL and 67.1 ± 58.8 mL. The postoperative drainage volume of the plate group was 85.1 ± 53.7 mL, and no wound drainage was needed in the screw group after surgery. Postoperative wound complications occurred in 2 cases of the screw group and 8 cases of the plate group. The recovery effects of Gissane angle and Bohler angle are similar in the 2 groups. The excellent and good rate of the American Orthopaedic Foot and Ankle Society ankle-hindfoot Scale in the screw group was 96.8% at 12 months after surgery, whereas the rate was 93.5% in the plate group. Compared with the traditional plate internal fixation, the percutaneous cannulated screw group achieved a similar excellent and good rate of clinical treatment. It has the advantages of less trauma, less bleeding, low incidence of complications, short preoperative preparation, and hospitalization time.

Multimetatarsal fractures are a particular type possibly associated with worse functional outcomes. Existing studies are scarce, fragmented, and lack control for confounders. This study aimed to explore the functional prognosis of isolated closed extra-articular multimetatarsal fractures and the different outcomes between the plate-screw and K-wire fixation. This retrospective study included 79 patients who underwent surgery for isolated closed extra-articular multimetatarsal fractures from May 2017 to December 2020. We recorded baseline characteristics. The primary outcome measure was Visual Analogue Scale (VAS), American Orthopedic Foot and Ankle Society (AOFAS) score, and Foot and Ankle Outcome Score (FAOS). Exploratory correlation analysis of the variables with VAS, AOFAS score, and FAOS was performed. The differences between the plate-screw group (n = 58) and K-wire group (n = 21) were compared. Seventy-nine patients (79 feet) were included with a follow-up of (47.3 ± 12.7) months (range, 26-70). Full weight bearing time was (11.7±5.3) weeks. VAS was (1.4±1.8) points, AOFAS score was (86.4±13.3) points, and FAOS was (79.0±11.1) points. Complications were observed in 17 cases (21.5%). According to exploratory correlation analysis, VAS was weakly associated with fixation method and gender, AOFAS was weakly associated with fixation method, FAOS was weakly associated with trauma mechanism. When the plate-screw group (n = 58) was compared with the K-wire group (n = 21), we found the former was superior to the latter in terms of full weight bearing time, VAS, AOFAS score, and malunion rate (all p < .05). FAOS was nonsignificant (p = .056). Operative treatment of isolated closed extra-articular multimetatarsal fractures showed good mid-term results. Plate-screw fixation was associated with faster rehabilitation as well as a lower malunion rate. The mid-term follow-up results showed patients with plate-screw fixation had better VAS and AOFAS scores.

OBJECTIVE: The treatment of distal third humeral shaft fracture is difficult. Studies have shown that anterior minimally invasive plate has lower probability of complication and higher healing rate. However there is no applicable anatomical plate at present. This study is to investigate the clinical effect of intramedullary nail combined with anterior minimally invasive plate in the treatment of distal humeral shaft fractures.
METHODS: The data of 83 patients with lower humerus shaft fracture treated from September 2015 to January 2020 were analyzed. According to different treatment methods, they were divided into two groups: 40 patients were treated with intramedullary nailing combined with minimally invasive anterior plate fixation (group A), and 43 patients were treated with double plate fixation through posterior approach (group B). General preoperative data, operative time, intraoperative blood loss, total incision length, fracture healing time, shoulder and elbow visual analogue scale (VAS) score, Constant-Murley shoulder function score, Mayo elbow function score, and complications were recorded and compared between the two groups. Two independent sample t-tests was used for follow-up, age, BMI, operation time, intraoperative bleeding, total incision length, fracture healing time, Constant-Murley score and Mayo score, and rank sum test was used for VAS score of shoulder and elbow.
RESULTS: There was no significant difference in preoperative general data between the two groups (p > 0.05), indicating comparability. There were no significant differences in operation time, total incision length, fracture healing time, Constant-Murley shoulder function score at the last follow-up, Mayo elbow function score, and shoulder and elbow VAS pain score between 2 groups (p > 0.05). The amount of intraoperative blood loss in observation group was 76.98 ± 16.46, which was significantly less than that in control group, and the difference was statistically significant (p < 0.01). There were no radial nerve injury, musculocutaneous nerve injury, incision infection and fracture nonunion in the observation group. In the control group, four cases of iatrogenic radial nerve injury, three cases of incision infection and three cases of fracture nonunion were found. The complication rate was 23.3% (10/43). There was statistical difference in the incidence of complications between the two groups (p < 0.01).
CONCLUSIONS: A humeral intramedullary nail combined with an anterior minimally invasive plate in the treatment of distal humeral shaft fracture has the advantages of less soft tissue damage, less blood transfusion, high fracture healing rate and low risk of iatrogenic radial nerve injury, which is an effective method for clinical treatment of this type of fracture.

OBJECTIVE: To explore clinical efficacy of dorsal plate assisted fixation of dorsal lunate fossa fracture block of distal radius.
METHODS: From January 2019 to January 2022, 30 patients were treated with dorsal plate assisted fixation of dorsal lunate fossa fracture of distal radius, including 13 males and 17 females, aged from 42 to 68 years old with an average of (48.7±5.6) years old;According to Doi fracture classification, 24 patients were type 3 blocks and 6 patients were type 4 blocks. The degree of palmar angle of anterior and posterior distal radius was fixed by dorsal steel plate during operation. Fracture healing and functional recovery of wrist were observed after operation. Functional evaluation was performed by Gartland and Werley scoring system at 12 months after operation.
RESULTS: All patients were followed up from 12 to 13 months with an average of (11.3±0.9) months. All fractures healed for 4 to 5 months with an average of(4.7±0.8) months. Median palpal inclination of anterior and posterior distal radius fixed by dorsal plate was 5.30°(4.85°, 6.03°), 12.45°(11.98°, 13.43°) respectively, and had statistical difference( P<0.01). Gartland and Werley scores was (1.1±0.4) at 12 months afteropertaion, and 27 patients got excellent result and 3 good.
CONCLUSIONS: Dorsal plate assisted fixation of dorsal lunate fossa fractures is beneficial to reduction and stabilization of displaced dorsal fractures and restoration of palmar inclination.

OBJECTIVE: For complex and unstable scapular fractures requiring simultaneous fixation of the glenoid neck, the lateral margin of the body, and/or the scapular diaphysis, reconstruction locking plate is difficult to achieve satisfactory fixation. In order to optimize the fixation effect, the newly designed claw-shaped bone plate was designed for fixing such fractures. We also evaluate the clinical effects and follow-up at an average of 1 year after treatment in scapular internal fixation by using reconstruction locking plate and claw-shaped bone plate in complex unstable scapular body and glenoid neck fracture.
METHODS: A retrospective study was conducted from 2018 to 2021, thirty-three patients (27 males and six females) who were defined unstable scapular fractures by Ada-Miller. Fifteen patients (52.86 ± 8.26 years) received claw-shaped bone plate and 18 cases (51.61 ± 11.31 years) received reconstruction locking plate with the intermuscular approach. The clinical effect was evaluated based on the operation time, intraoperative blood loss, surgical complications, clinical healing time and Constant-Murley score (CMS). The data analysis by Student t, Mann-Whitney U test and Pearson\'s chi squared test.
RESULTS: Compared with reconstruction locking plate, the claw-shaped bone plate showed shorter operation time (102.73 ± 18.43 min vs. 156 ± 37.53, P < 0.0001), higher CMS (94.00 ± 4.07 vs. 89.88 ± 5.42, P = 0.02) and no differences between the two groups regarding intraoperative blood loss (208.00 ± 96.45 mL vs. 269.44 ± 120.21, P = 0.12) and clinical healing times (9.96 ± 1.52 vs. 10.05 ± 1.67, P = 0.87). Follow-up were conducted at first, third, 6 and 12 months after surgery. The operation was successful in all patients with no intraoperative complications.
CONCLUSIONS: For the treatment of complex and unstable scapular neck body fractures, the application of claw-shaped bone plate demonstrated short operation time, better stability of the fracture block, and higher CMS. In the intraoperative and postoperative follow-up showed better clinical results and rehabilitation effects.