BACKGROUND: Titanium implants are commonly used for surgical fixation in orthopedic trauma, and have many benefits compared to stainless steel implants. Despite these benefits, some orthopedic surgeons remain hesitant to use titanium implants due to concerns of difficulty with future implant removal, given concerns with cold-welding and screw strippage. The objective of this study was to assess difficulties associated with titanium plate and screw implant removal.
METHODS: This is a retrospective case series from a large hospital system. Patients were identified using Current Procedural Terminology (CPT) code 20,680 from 2017 to 2020. Patients were included if they had removal of titanium plate and screws from the upper or lower extremity, were at least18 years of age, and considered skeletally mature. The ease of titanium plate/screw removal was determined by assessing for implant cold-welding, broken screws, stripped screws, and the need for advanced tools (screw removal set, trephine, burr).
RESULTS: 157 patients were identified, with a mean age of 54 years and 59 % female. In total 1274 screws were removed: 14 (1.1 %) were stripped, 8 (0.6 %) were cold-welded, 42 (3.3 %) were loose, and 13 (1.0 %) were broken. 183 plates were removed in total, and 15 (8.2 %) had bone overgrowth that required removal. 12 (7.6 %) procedures were complicated and required the use of advanced tools. Complicated implant removal operations occurred after significantly longer in vivo implant time (mean of 3.7 vs. 1.1 years, p = 0.036), were associated with a younger age, were more likely to occur in lower extremity procedures (p = 0.034), and took significantly longer time for removal (95 vs. 42 min, p < 0.001).
CONCLUSIONS: Despite concerns with titanium implants, we found a low rate of screw strippage, breakage, and cold welding during the removal process. However, 7.6 % of the 157 surgeries required additional tools other than just a screwdriver, and needed additional operative time. This information allows treating surgeons to plan for implant removal when titanium implants have been used for fixation.
METHODS: IV.

BACKGROUND: Treatment for complex olecranon fractures with metaphyseal comminution can be challenging. To improve reduction maneuvers and augment stability, we apply a small medial and/or lateral locking compression plate (LCP) prior to placing a posterior contoured 3.5 mm-2.7 mm LCP. The aim is to describe our technique and outcomes of this \"orthogonal\" plating technique.
METHODS: 26 patients were treated with orthogonal plating. Clinical outcome variables were available for all patients at a median of 27 months (IQR 6-54), and patient-reported outcomes (Q-DASH and MEPS) for 23 patients at 38 months (IQR 18-71).
RESULTS: All fractures healed at a median of 2.0 months (IQR 1.5-3.8). The median elbow flexion was 120°, extension-deficit 15°, pronation 88°, and supination 85°. The median Q-DASH was 9 (IQR 0-22) and the median MEPS was 90 (IQR 80-100). Hardware was electively removed in seven patients. One patient had a late superficial infection that resolved with hardware removal and antibiotics, and one patient had two consecutive re-fractures after two hardware removals; and healed after the second revision surgery.
CONCLUSIONS: Orthogonal plating with a posterior LCP and a small medial and/or lateral LCP is a safe technique that leads to excellent healing rates, and good clinical and patient-reported outcomes.

BACKGROUND: Avulsion fractures of the calcaneal tuberosity with significant displacement can cause soft tissue complications in the heel. However, a treatment strategy for calcaneal tuberosity fractures with poor heel-skin condition is yet to be established. Here, we report a case involving avulsion fracture of the calcaneal tuberosity presenting with superficial skin necrosis that was treated with a plate lacking the anterior component and screws inserted percutaneously.
METHODS: A 74-year-old woman presented with progressive right heel pain following an injury to her heel sustained approximately six weeks previously. She had experienced difficulty walking due to heel pain and superficial necrosis was observed on the posterior surface of the heel. Radiography and computed tomography revealed an avulsion fracture of the calcaneal tuberosity with superior displacement. Open reduction was performed using a lateral L-shaped incision. After inserting two cancellous screws percutaneously into the calcaneal tuberosity, we fixed a plate lacking the anterior component to the lateral surface of the calcaneus. The superficial necrosis healed gradually post-operatively. Bone union was confirmed using radiography six months post-operatively.
CONCLUSIONS: We developed a novel surgical procedure to treat avulsion fractures of the calcaneal tuberosity with poor skin condition. The combination of a plate lacking the anterior component and the percutaneous insertion of canulated cancellous screws can reduce the risk of post-operative soft tissue complications while maintaining fixation of the fractured fragment.
CONCLUSIONS: Our findings provide a novel surgical method for the treatment of avulsion fractures of the calcaneal tuberosity with soft tissue complications.

The focus of this paper revolves around the examination of flow of ternary hybrid nanofluid, specifically the Al2O3-Cu-CNT/water mixture, with buoyancy effect, across three distinct geometries: a wedge, a flat plate, and a cone. The study takes into account the presence of quadratic thermal radiation and heat source/sink of non-uniform nature. To develop the model, the Cattaneo-Christov theory is utilized. The equations governing the flow are solved by applying similarity transformations and employing the \"bvp4c function in MATLAB\" for numerical analysis and solution. Conventional methods for conducting parametric studies often face challenges in producing significant conclusions owing to the inherent complex form of the model and the method involved. To address the aforementioned issue, this paper explores the potential of machine learning methods to foresee the conduct of the flow characterized by multiple interconnected parameters. By utilizing simulated data, an artificial neural network is trained using the Levenberg-Marquardt algorithm to learn and comprehend the underlying patterns. Subsequently, the trained neural network is employed to estimate the Nusselt number on the surfaces of all three geometries. This approach offers a promising alternative to traditional parametric studies, enabling more precise predictions and insights into the behavior of complex systems. The Nusselt number is highest for THNF flow over the cone. The mean squared error (MSE) values for the ANN algorithm, across all analyzed cases, range from 0 to 0.03972. The findings contribute to an improved understanding of the characteristics and dynamics of ternary hybrid nanofluid flow in various geometries, assisting in the design and optimization of heat transfer systems involving such fluids.

UNASSIGNED: This study\'s goal was to evaluate the outcomes of lateral column lengthening by plate fixation without bone graft in the management of symptomatic flexible flatfoot.
UNASSIGNED: A prospective randomized trial study included 30 feet (27 patients) and was performed from March 2017 to December 2019. Functional and radiological evaluations were done pre-operative and at the final post-operative follow-up. The functional assessment was done using the American Orthopaedic Foot and Ankle Society (AOFAS) score.
UNASSIGNED: The mean follow-up was 16.5 ± 3.027 months. The mean age of patients was 22.6 ± 6.29 years. All cases showed union ranging from 8 to 12 weeks, with a mean of 10 ± 1.88 weeks. The mean AOFAS score improved from 51.6 ± 6.75 to 92.2 ± 6.21. The mean anteroposterior (AP) talo-first metatarsal angle improved from 25.3° ± 8.31° to 3.4° ± 5.10°. The mean anteroposterior (AP) talo-navicular coverage improved from 22.10° ± 4.28° to 2.3° ± 3.46°. The mean Lateral talo-first metatarsal angle improved from 18.6° ± 4.79° to 3.3° ± 3.16°. The calcaneal pitch angle improved from 9.6° ± 4.14° to 15.1° ± 4.43°. The mean lateral talo-calcaneal angle improved from 45.7° ± 3.77° to 37.5° ± 3.47°.
UNASSIGNED: Using an interposition wedge plate for LCL without bone graft leads to a high union rate, maintains the correction, and avoids possible complications of autografts and allografts.

BACKGROUND: Open reduction and plate internal fixation (ORIF) is one of the most common treatment methods for proximal humeral fractures. Complications associated with the greater tuberosity (GT) are rarely reported, therefore, the purpose of this study was to analyze the complications associated with the GT and the risk factors after locked-plate internal fixation.
METHODS: We retrospectively analyzed the medical and radiographic data of patients with proximal humeral fractures involving the GT treated with locking plates between January 2016 and July 2019. We divided all patients into two groups, the anatomic GT healing group and the nonanatomic GT healing group, depending on the radiographic outcomes of the GT. Clinical outcome was assessed by the Constant scoring system. Potential risk factors included preoperative and intraoperative factors. Preoperative factors included sex, age, body mass index, fracture type, fracture-dislocation, proximal humeral bone mineral density, humeral head extension, hinge integrity, comminuted GT, volume and surface area of the main GT fragment, and displacement of the main GT fragment. Intraoperative factors were adequate medial support, residual head-shaft displacement, head-shaft angle and residual GT displacement. Univariate logistic regression and multivariate logistic regression were used to identify risk factors.
RESULTS: There were 207 patients (130 women and 77 men; mean age, 55 years). GT anatomic healing was observed in 139 (67.1%) patients and nonanatomic healing in 68 (32.9%). Patients with GT nonanatomic healing had significantly inferior Constant scores than those with GT anatomic healing (75.0 ± 13.9 vs. 83.9 ± 11.8, P < 0.001). Patients with high GT malposition had worse Constant scores than patients with low GT malposition (73.3 ± 12.7 vs. 81.1 ± 11.4, P = 0.039). The multivariate logistic model showed that GT fracture characteristics were not risk factors for nonanatomic GT healing, while residual GT displacement was.
CONCLUSIONS: Nonanatomic healing of the GT is a high-rate complication of proximal humeral fractures, resulting in inferior clinical outcomes, especially for high GT malposition. Fracture characteristics of the GT are not risk factors for GT nonanatomic healing and GT comminution should not be regarded as a contraindication to ORIF for proximal humeral fractures.

BACKGROUND: Bipolar clavicle injury is a rare injury involving any combination of dislocation and/or fracture at both ends of the clavicle. Most reports of bipolar clavicle injury have been based on a single case, and treatment of this injury remains controversial. The present study was performed to evaluate the efficacy of surgical management with internal plating for bipolar clavicle injuries.
METHODS: We performed internal plating to treat seven consecutive bipolar clavicle injuries with different injury patterns from May 2013 to June 2021. A clavicle hook plate was used for five sternoclavicular joint injuries (including a revision surgery) and three acromioclavicular joint dislocations, a T plate was used for one sternoclavicular joint injury, and an anatomic plate was used for one distal clavicle fracture. At follow-up, radiographs were assessed for bone alignment, joint congruity, fracture union or malunion, and implant failure or migration. Clinical evaluation included determination of the Disability of the Arm, Shoulder, and Hand (DASH) score; Constant-Murley score; visual analog scale (VAS) score; and complications.
RESULTS: The patients were regularly followed up after the operation, and functional parameters were assessed over time. At a mean follow-up of 28.1 ± 22.0 months, each fracture had solid bone union, and each dislocation showed no sign of recurrent instability. The mean shoulder forward flexion was 159.3° ± 7.9°, and the mean DASH score was 8.8 ± 5.1. The mean Constant-Murley score was 88.9 ± 7.9, with six cases assessed as excellent and one case assessed as good. The mean VAS score was 1.0 ± 1.5, and the mean patient satisfaction score was 9.3 ± 0.8. No complications occurred, and each patient was able to resume their preinjury daily activity and was highly satisfied with their treatment.
CONCLUSIONS: In the present study, internal plating for bipolar clavicle injury allowed early mobilization and resulted in good joint function. We recommend fixation of the more severely affected side first because the other side may be passively reduced and acquire stability once the more severely affected side has been fixed. Internal fixation of the other end may therefore be unnecessary unless residual instability exists.

BACKGROUND: Intramedullary nail fixation is currently the modality of choice in surgical treatment for atypical femoral fractures (AFF). Its uses are limited, however, in severely bowed femurs, narrow medullary canals, or in the presence of thick endosteal callus at the apex of the femoral curve. In these cases, extramedullary plate osteosynthesis is preferred. The consideration when adopting plate osteosynthesis is whether a short or long segment fixation is superior. We hypothesize that a long segment fixation has the potential advantage of protecting the entire length of the femur from future fractures in the adynamic bone. In this series, we present two cases from our institution, with the aims of discussing the benefits and limitations of short versus long segment plate fixation in AFF.
METHODS: We report two uncommon cases of bisphosphonate-related AFF in two Asian patients with severe femoral curvature, who were treated with extramedullary plate osteosynthesis at our institution. One patient underwent fixation with a short segment plate osteosynthesis, and the other received a long plate osteosynthesis spanning the proximal to distal femur in an attempt to protect the bone from future fractures. Both patients showed a favourable and uncomplicated course post-surgery, with early return to ambulation and radiographic bone union at follow up.
CONCLUSIONS: We expect to see an increase in the number of patients with AFF and bowed femurs, especially with the increased usage of bisphosphonates given an ageing Asian population. Surgical treatment with short and long plate osteosynthesis are options with their own advantages and limitations. With the advent of new anatomical plate options, long segment fixation has become more accessible and may be considered in this patient group as it has the potential advantage of protecting the adynamic femur from future fractures. Further studies should be targeted to determine which method of treatment is superior in this particular group of patients.

BACKGROUND: and Importance: The purpose of this study was to assess the functional outcomes and complications of tibial lengthening using unilateral external fixation and then plating.
METHODS: This was a prospective case series study that enrolled people of short stature or leg length discrepancy of more than 3 cm from January 2019 to January 2021. A total of 11 patients (one male and 10 females) were recruited for the study, including seven short statures and four patients with leg length discrepancies. The external fixaters in this study were Muller\'s frame or Nhan\'s frame.
RESULTS: The average age of patients at the time of surgery was 25.89 years (range: 13-41 years). The study included 18 tibias that were lengthened and then plated. Average tibial lengthening was 6.89 ± 1.25 cm (21.87 ± 6.59%). The functional result was excellent in seven patients and good in four patients. Pin-track infection occurred in three tibias. There was one case of superficial infection. 12 legs (66.7%) developed ankle equinus after removing the external fixator. Four legs with severe equinus deformity were treated with percutaneous tendo-Achilles lengthening. Valgus deviation occurred in eight tibias. Peroneal nerve neuropraxia occurred in two legs during distraction. Distal migration of the fibula head occurred in four legs.
CONCLUSIONS: Our study suggested that tibial lengthening using Nhan\'s external fixater or Muller frame then plating was safe and effective provided complications were looked for and kept in check. Equinus contracture, pin-site infection, and valgus alignment were the most common complications.
METHODS: Level IV, prospective case series study.

UNASSIGNED: The purpose of this study was to classify the possible indications for a combined approach to distal radius fractures (DRFs) by investigating surgical outcomes of patients treated according to our treatment algorithm.
UNASSIGNED: A combined approach was performed in 32 patients. Patients who were thought to need a combined approach were classified into three types according to the combined injuries associated with loss of volar cortical buttresses in DRFs. The classifications included the following: type 1, free intra-articular fragments; type 2, distally migrated dorsal fragments located beyond the wrist joint; and type 3, centrally impacted articular fragments and displaced dorsal fragments, not reduced by indirect methods.
UNASSIGNED: Seven patients had type 1 fractures treated with volar plates and excision of the intra-articular fragments. Fourteen patients had type 2 fractures: 12 were treated with volar plates and excision of dorsal fragments, and 2 with relatively large unstable dorsal fragments were treated with combined volar and dorsal plates. The remaining 11 patients had type 3 fractures treated with combined volar and dorsal plates. At the latest follow-up, the radiographs revealed an average of 16.9° of radial inclination, an average of 4.2° of volar tilt, and an average of 7.5 mm of radial height. According to the Garland and Werley scores, the functional results were excellent for 3 patients, good for 25, and fair for 4.
UNASSIGNED: The classification system indicated when an additional dorsal approach was needed in unstable DRFs, and it may establish useful guidelines for appropriate surgical decision-making.