BACKGROUND: There is a lack of consensus on the use of postoperative bracing for lumbar degenerative conditions. Spine surgeons typically determine whether to apply postoperative braces based primarily on clinical experience rather than robust, evidence-based medical data. Thus, the present study sought to assess the impact of postoperative bracing on clinical outcomes, complications, and fusion rates following lumbar fusion surgery in patients with degenerative spinal conditions.
METHODS: Only randomized controlled studies published between January 1990 and 20 October 2023 were included in this meta-analysis. The primary outcome measures consisted of pre- and postoperative assessments of the Oswestry Disability Index (ODI) and visual analog scale (VAS) scores. Improvements in VAS and ODI scores were analyzed in the early postoperative period (1 month after operation) and at final follow-up, respectively. The analysis also encompassed fusion rates and complications.
RESULTS: Five studies with 362 patients were included in the present meta-analysis. In the early postoperative period, the brace group showed a relatively better improvement in ODI scores compared with the no-brace group (19.47 vs 18.18), although this difference was not statistically significant (P = 0.34). Similarly, during the late postoperative period, the brace group demonstrated a slightly greater improvement in VAS scores in comparison to the no-brace group (4.05 vs 3.84), but this difference did not reach statistical significance (P = 0.30). The complication rate was relatively lower in the brace group compared with the no-brace group (14.9% vs 17.4%), although there was no statistical difference between the 2 groups (P = 0.83). Importantly, there were no substantial differences in fusion rates between patients with or without braces.
CONCLUSIONS: The present meta-analysis revealed that the implementation of a brace following lumbar fusion surgery did not yield substantial differences in terms of postoperative pain relief, functional recovery, complication rates, or fusion rates when compared with cases where no brace was employed.
CONCLUSIONS: This meta-analysis provides valuable insights into the clinical impact of postoperative bracing following lumbar fusion surgery for degenerative spinal conditions.
METHODS:

UNASSIGNED: This study aims to evaluate the efficacy and safety of using a strip-shaped cymba conchae orthosis for the nonsurgical correction of complex auricular deformities.
UNASSIGNED: Clinical data were collected from 2020 to 2021 for 6 patients who underwent correction using a strip-shaped cymba conchae orthosis. The indications, corrective effects, and complications associated with use of the orthosis were analyzed.
UNASSIGNED: There were four indications for treatment: cryptotia with helix adhesion; cryptotia with grade I microtia; cryptotia with excessive helix thickness; and auricular deformity beyond the treatment time window (≥6 months). Excellent corrective effects were observed in all 6 patients. Complications occurred in one patient, who recovered after symptomatic treatment.
UNASSIGNED: The use of a strip-shaped cymba conchae orthosis alone or combined with a U-shaped helix orthosis presents a feasible approach for correcting complex auricular deformities or deformities beyond the treatment time window in pediatric patients.

BACKGROUND: The shortcomings of plaster in water resistance, air permeability, skin comfort, fixed stability and weight of wearing are still to be solved. 3D printed cast can overcome the above shortcomings. At present, there is a relative lack of data on the clinical application of 3D printed cast, probably due to its complexity, relatively long operating time, and high price. We aimed to compare and evaluate the short-term effectiveness, safety and advantages of 3D printed wrist cast versus polymer orthosis in the treatment of Colles fracture.
METHODS: Forty patients with Colles fracture in our hospital from June to December 2022 were selected and divided into an observation group (20 patients, treated with instant 3D printed cast) and a control group (20 cases, treated with polymer orthosis). Both groups treated with manual reduction and external fixation. The visual analogue scale (VAS), immobilization effectiveness and satisfaction scores, Disability of the Arm, Shoulder and Hand (DASH) score, complications and imaging data were collected and compared before immobilization and at 2, 6 and 12 weeks after the fracture.
RESULTS: VAS at 2 weeks after the fracture was significantly lower in the observation group than in the control group ( P < 0.05). The immobilization effectiveness and satisfaction scores at 6 weeks after the fracture were significantly higher in the observation group than in the control group (all P < 0.05). The DASH scores at 2 and 6 weeks after the fracture were significantly lower in the observation group than in the control group (all P < 0.05). There wasn\'t rupture of the printed cast or orthosis in both groups. There were 2 cases of skin irritation in the control group, and no skin irritation occurred in the observation group. The palmar tilt angle and ulnar inclination angle at 2 weeks and 12 weeks after the fracture were significantly higher in the observation group than in the control group (all P < 0.05).
CONCLUSIONS: Both instant 3D printed cast and polymer orthosis are effective in the treatment of Colles fracture. But instant 3D printed cast is better than polymer orthosis in areas of good clinical and imaging performance, and high patient satisfaction and comfort.

OBJECTIVE: Taylor spatial frame (TSF) is a kind of six-axis external fixator based on Stewart platform, which is widely used in the fields of trauma orthopaedics and orthopaedic reconstruction.
OBJECTIVE: To reduce the irregular movement of TSF\'s moving platform during orthopaedic process and decrease the risk of complications caused by collision between bone and surrounding tissue.
METHODS: We combine the kinematics solutions with the multi-objective genetic algorithm and ant colony optimization to get the optimal solution for adjustment of strut length and order. We conduct simulation and physical experiment of orthodontic process respectively to prove the effectiveness of our method.
RESULTS: After optimization, the average offset during a single adjustment is less than 1 mm, and the offset during the whole orthopaedic process is reduced by about 38.8%.
CONCLUSIONS: It demonstrates that our method can effectively reduce the offset of moving platform while ensuring orthopaedic accuracy.

OBJECTIVE: To design appropriate orthosis for hallux valgus, a difficult foot condition that affects a quarter of the body\'s bones, we need to clarify the numerical biomechanical features, which have not been established in previous biomechanical studies. Therefore, we constructed a finite element model of the bunion foot to investigate the orthopaedic force compensation mechanism.
METHODS: A patient with moderate hallux valgus was recruited. CT imaging data in DICOM format were extracted for three-dimensional foot model reconstruction. In conjunction with the need for rapid design of bunion orthosis, a metatarsal force application sizing method based on an orthogonal test design was investigated. The orthogonal test design was used to obtain the hallux valgus angle (HVA) and the inter metatarsal angle (IMA) data for different force combinations. Based on the extreme difference analysis and analysis of variance of the test results, the influence of different force combinations on the bunion angle was quickly determined.
RESULTS: The results showed that the stress concentration occurred mainly in the first metatarsal bone. The distribution trend was in the medial and lateral middle of the bone and gradually decreased to the dorsal base of the bone body. The greatest stress occurs in the cartilage between the phalanges and metatarsals. In 25 groups of simulation experiments, HVA was reduced from 27.7° to 13°, and IMA was reduced from 12.5° to 7.3°.
CONCLUSIONS: Applying detailed orthopaedic force collocation to the first metatarsal column can effectively restore the mechanics and kinematics of hallux valgus, and provide a reference for the treatment of bunion valgus and the design of orthopaedic devices.

BACKGROUND: Ewing\'s sarcoma is a highly malignant primary bone tumor that commonly affects children. For young patients, multidisciplinary treatment and limb salvage are recommended, and surgical plans considering the growth potential and bone activity after tumor resection are essential.
METHODS: An 11-year-old Asian boy had a 1-mo history of a right-sided limping gait. Imaging revealed a proximal tumor with bone destruction and physeal involvement over the right femoral neck. He was diagnosed with stage IV (T1N0M1aG3) Ewing\'s sarcoma with bilateral lung metastases. Neoadjuvant chemotherapy decreased the tumor size and confined it to the metaphyseal region. The patient underwent four stages of surgery: wide tumor excision plus reconstruction with vascular fibular bone graft plus internal fixation; repeat open reduction and internal fixation; femoral lengthening with orthosis after physeal maturity; and orthosis removal and bone elongation (approximately 6 cm). Following surgery, he could walk without discomfort and had almost equal-sized bilateral femoral heads, indicating physis preservation. The surgery was successful, and normal femoral head growth was achieved after complete remission. The patient was able to resume normal activities with equal length of the bilateral lower limbs.
CONCLUSIONS: Tumor treatment and reconstruction following resection are important in skeletally immature patients with Ewing\'s sarcoma to improve quality of life.

UNASSIGNED: Motor dysfunction in the upper extremities after stroke prohibits people with stroke from being independent in daily living. The application of fNIRS to explore brain activity under rehabilitation intervention is a research focus on neurorehabilitation.
UNASSIGNED: The purpose of this study was to explore, using a grip-release ring motor task, the activated changes of regions of interest and changes in motor function utilizing fNIRS technology and test scales on persons with stroke who received unilateral task-oriented therapy with a hand orthosis in the early subacute stroke period before and after intervention. The study aimed to find a sensitive motor task and region of interest first, then to evaluate the feasibility and mechanism of this rehabilitation method by utilizing fNIRS technology in the next randomized controlled trial.
UNASSIGNED: In this case series, eight right-handed, right hemiplegia subacute stroke persons (6 males,2 females from age 47 to 72) were enrolled. They received 30 min of unilateral task-oriented therapy without orthosis and 30 min of unilateral task-oriented therapy with orthosis (5 days/week) for 4 weeks. Activated channel numbers and beta values based on oxygenated hemoglobin concentration change using a grip-release ring motor task were estimated with fNIRS. Clinical outcome measures, including grip strength evaluation, action research arm test, and Fugl-Meyer assessment of the arm, were evaluated at the same time.
UNASSIGNED: Individual activation analysis showed that, after intervention, Subjects 1, 2, 6, 7, and 8 had the maximum mean beta value located in the left premotor cortex, while Subjects 4 and 5 had the maximum mean beta value located in the left sensorimotor cortex. The activation analysis of Subject 3 showed the maximum mean beta value located in the right premotor cortex. Deactivations of left sensorimotor cortex, left premotor cortex, and bilateral prefrontal cortex were observed after intervention which were different from other cases. Group activation analysis showed that bilateral cerebral hemispheres were activated in all eight participants, with right hemisphere and right supplementary motor cortex activated dominantly. After the intervention, the activation of bilateral hemispheres decreased but in different brain regions; there was a trend that the activation intensity of left sensorimotor cortex, right premotor cortex, and right prefrontal cortex decreased while activation intensity of left premotor cortex and left prefrontal cortex increased. Each participant demonstrated improvements in all the clinical test scales after intervention.
UNASSIGNED: Left premotor cortex, left sensorimotor cortex, and right supplementary motor cortex may be the primary regions of interest. Grasp-release ring task was not appropriate to achieve our fNIRS research objective and a more sensitive motor task or more sensitive evaluating indicator should be used in further studies.

UNASSIGNED: To evaluate the safety, walking efficiency, physiological cost, don and doff time cost, and user satisfaction of Ai-robot.
UNASSIGNED: Prospective, multi-center, and cross-over trial.
UNASSIGNED: Paraplegic subjects (n = 40) with T6-L2 level spinal cord injury.
UNASSIGNED: Subjects who could walk independently using Aiwalker, Ailegs, and hip knee ankle foot orthosis (HKAFO) for 6 min within 30 days of training underwent 10 sets of tests. In each set, they completed three 6-min walk test (6MWT) sessions using the three aids in random order.
UNASSIGNED: Skin lesions, pressure sores, and fractures, were the main adverse events, likely due to a lack of experience in using exoskeleton systems. The average 6MWT distances of the Aiwalker, Ailegs, and HKAFO groups were 134.20 ± 18.74, 79.71 ± 18.06, and 48.31 ± 19.87 m, respectively. The average heart rate increases in the Aiwalker (4.21 ± 8.20%) and Ailegs (41.81 ± 23.47%) groups were both significantly lower than that in the HKAFO group (62.33 ± 28.32%) (both p < 0.001). The average donning/doffing time costs for Ailegs and Aiwalker were significantly shorter than that of HKAFO (both p < 0.001). Satisfaction was higher in the Ailegs and Aiwalker groups (both p < 0.001).
UNASSIGNED: Subjects with paraplegia below T6 level were able to ambulate safely and efficiently with Ai-robot. The use of Ai-robot should be learned under the guidance of experienced medical personnel.

To determine and compare the effect of ankle-foot orthosis (AFOs) types on functional outcome measurements in individuals with (sub)acute or chronic stroke impairments.
PubMed, Web of Knowledge, Embase, Scopus, ProQuest, and Cochrane were searched from inception until September 2020. Methodological quality assessment of 30 studies was conducted based on the Downs and Black checklist. Functional indices were pooled according to their standardized mean difference (SMD) and 95% confidence intervals (CI) in a random-effect model. A narrative analysis was performed where data pooling was not feasible.
Overall pooled results indicated improvements in favor of AFOs versus without for the Berg Balance Scale (SMD: 0.54, CI: 0.19-0.88), timed-up and go test (SMD: -0.45, CI: -0.67 to -0.24), Functional Ambulatory Categories (SMD: 1.72, CI: 1.25-2.19), 6-Minute Walking Test (SMD: 0.91, CI: 0.53-1.28), Timed Up-Stairs (SMD: -0.35, CI: -0.64 to 0.05), and Motricity Index (SMD: 0.65, CI: 0.38-0.92). Heterogeneity was non-significant for all outcomes (I2 < 50%, p > 0.05) except the Berg Balance Scale and Functional Ambulatory Categories. Additionally, there was not sufficient evidence to determine the effectiveness of specific orthotic designs over others.
An AFO can improve ambulatory function in stroke survivors. Future studies should explore the long-term effects of rehabilitation using AFOs and compare differences in orthotic designs.IMPLICATIONS FOR REHABILITATIONAn AFO can improve functional performance and ambulation in survivors of strokes.Wearing an AFO in rehabilitation care during the subacute phase post stroke may have beneficial effects on functional outcomes measured.There was no evidence as to the effectiveness of specific AFO designs over others.

The delayed delivery, poor fitting and discomfort of customised orthoses are reported in rehabilitation clinics as resulting in more invasive interventions. The current practice of orthosis customisation relies heavily upon the experience and fabrication processes of therapists. In order to better understand the current practice, and thus identify data that is required for better comfort moving towards a data-driven customisation, this article describes a study generating working models of therapists. Customisations of hand and wrist orthoses for 18 patients were observed. Verbal protocol analysis was employed to extend the current understanding of fabrication processes. Working models of four therapists were established with quantitative evaluation on major phases, interactive activities and iterations of performing tasks during fabrication, revealing different working models between in- and out-patient departments (e.g. fabrication for in-patients was more complex and focussed on ergonomic fitting whereas fabrication for out-patients paid attention to durability) which were qualitatively explained. Practitioner summary: Fit and comfort are imperative for orthosis design and fabrication, however the current practice of customisation of an orthosis relies upon the experience of individual hand therapist. The article presents working models of hand therapists, and relevant data that would enable customisation of orthosis for better fit. Abbreviations: VPA: verbal protocol analysis; h&w: hand and wrist; LTT: low temperature thermoplastic; ANOVA: analysis of variance.