This study investigated the effects of the antidepressant sertraline hydrochloride (Ser-HCI) on rice physiology when combined with arsenic (III) or cadmium. Hydroponic experiments revealed that combined lower concentrations (0.2 and 0.6 mg L-1) of Ser-HCl and As (III) or Cd increased rice biomass and reduced pH and low molecular weight organic acids. The fluorescence intensity was enhanced with Ser-HCl and As-only treatments, with a significant difference (p < 0.05) in the dissolved organic matter index. There was a decrease in endophyte-specific operational taxonomic units, with proteobacteria dominating the rice root endophytes. The addition of Ser-HCl resulted in the Verrucomicrobiota increasing by 6.4 times, which was positively correlated with malic acid and negatively correlated with pH. Functional annotation highlighted alterations in carbohydrate metabolism pathways. This study provides insights into the interactive effects of Ser-HCl on rice when combined with As (III) or Cd, addressing gaps in our understanding of the impact of antidepressants on plant systems.

Graphene-based material is widely used to remove arsenic from water due to its layered structure with high surface area. Here, we have successfully synthesized Fe-La bimetallic modified graphite sheet materials to more efficiently remove As(III) from aqueous solution. The results showed that Fe-La-graphite sheets (FL-graphite sheets) have a larger specific surface area (194.28 m2·g-1) than graphite sheets (2.80 m2·g-1). The adsorption capacity of FL-graphite sheets for As(III) was 51.69 mg·g-1, which was higher than that of graphite sheets (21.91 mg·g-1), La-graphite sheets (26.06 mg·g-1), and Fe-graphite sheets (40.26 mg·g-1). The FL-graphite sheets conformed to the Freundlich and Dubinin-Radushkevich isotherm, and the maximum adsorption capacity was 53.62 mg·g-1. The removal process obeys intra-particle diffusion and pore diffusion for As(III). The results of batch adsorption experiments and characterization analyses demonstrated that oxidation, ligand exchange, and inner sphere complexation mechanisms involved in the adsorption of FL-graphite sheets to As(III) in comparison with graphite sheets. In addition, electrostatic attraction mechanism was found vital in the adsorption. Ecotoxicity assessment revealed that FL-graphite sheets have little influence on rice germination and growth, but reduced the toxicity of As(III) to rice. Therefore, the FL-graphite sheets have good practical application value in purifying As(III) polluted water with litter ecotoxicity.

Rice can accumulate more organic and inorganic arsenic (iAs) than other crop plants. In this study, the localization of As in rice grains was investigated using High Performance Liquid Chromatography-Inductively Coupled Plasma Mass Spectrometry (HPLC-ICP-MS) based on 26 rice varieties collected from two provinces. In all the samples, the total As contents in polished rice were 0.03-0.37 mg/kg, with average values of 0.28 and 0.21 mg/kg for two sample sets. The results of the determination of arsenic speciation in different components of rice grain showed that in the polished and brown rice the mean value of arsenite (As(III)) was nearly twice than that of arsenate (As(V)). The regional difference was observed in both total As contents and As speciation. The reason may be that As(III) is more mobile than As(V) in a dissociated form and because of soil properties, rice varieties, and the growing environment. The proportion of iAs and the total As in rice bran was higher than that in polished rice, and this is because As tends accumulate between the husk and the endosperm. In our study, selenium could alleviate the risk of arsenic toxicity at the primary stage of rice growth. Co-exposure to As and Se in germinated rice indicated that the reduction in As accumulation in polished rice reached 73.8%, 76.8%, and 78.3% for total As, As(III), and As(V) when compared with rice treated with As alone. The addition of Se (0.3 mg/kg) along with As significantly reduced the As amount in different parts of germinated rice. Our results indicated that Se biofortification could alleviate the As accumulation and toxicity in rice crops.

In this work, a new dendrimer modified magnetic graphene oxide (GO) was used as a substrate for electrodeposition of Au nanoparticles. The modified magnetic electrode was employed for sensitive measuring of As(III) ion as a well-established human carcinogen. The prepared electrochemical device exhibits excellent activity towards As(III) detection using the square wave anodic stripping voltammetry (SWASV) protocol. At optimum conditions (deposition potential at -0.5 V for 100 s in 0.1 M acetate buffer with pH 5.0), a linear range from 1.0 to 125.0 μgL-1 with a low detection limit (calculated by S/N = 3) of 0.47 μg L-1 was obtained. In addition to the simplicity and sensitivity of the proposed sensor, its high selectivity against some major interfering agents, such as Cu(II) and Hg(II) makes it an appreciable sensing tool for the screening of As(III). In addition, the sensor revealed satisfactory results for detection of As(III) in different water samples, and the accuracy of obtained data were confirmed by inductively coupled plasma atomic emission spectroscopy (ICP-AES) setup. Accounting for the high sensitivity, remarkable selectivity and good reproducibility, the established electrochemical strategy has great potential for analysis of As(III) in environmental matrices.

Although the removal ability of potassium ferrate (K2FeO4) on aqueous heavy metals has been confirmed by many researchers, little information focuses on the difference between the individual and simultaneous treatment of elements from the same family of the periodic table. In this project, two heavy metals, arsenic (As) and antimony (Sb) were chosen as the target pollutants to investigate the removal ability of K2FeO4 and the influence of humic acid (HA) in simulated water and spiked lake water samples. The results showed that the removal efficiencies of both pollutants gradually increased along the Fe/As or Sb mass ratios. The maximum removal rate of As(III) reached 99.5% at a pH of 5.6 and a Fe/As mass ratio of 4.6 when the initial As(III) concentration was 0.5 mg/L; while the maximum was 99.61% for Sb(III) at a pH of 4.5 and Fe/Sb of 22.6 when the initial Sb(III) concentration was 0.5 mg/L. It was found that HA inhibited the removal of individual As or Sb slightly and the removal efficiency of Sb was significantly higher than that of As with or without the addition of K2FeO4. For the co-existence system of As and Sb, the removal of As was improved sharply after the addition of K2FeO4, higher than Sb; while the latter was slightly better than that of As without K2FeO4, probably due to the stronger complexing ability of HA and Sb. X-ray energy dispersive spectroscopy (EDS), X-ray diffractometer (XRD), and X-ray photoelectron spectroscopy (XPS) were used to characterize the precipitated products to reveal the potential removal mechanisms based on the experimental results.

In this study, a screen-printed carbon electrode (SPCE) based on in situ deposition modification was developed for the sensitive, rapid, easy and convenient determination of As(III) in water and tea by linear sweep anodic stripping voltammetry (LSASV). The screen-printed carbon electrodes were placed in a solution consisting of As(III) solution, chlorauric acid and L-cysteine. Under certain electrical potential, the chloroauric acid was reduced to gold nanoparticles (AuNPs) on the SPCE. L-cysteine was self-assembled onto AuNPs and promoted the enrichment of As(III), thus enhancing the determination specificity and sensitivity of As(III). The method achieved a limit of determination (LOD) of 0.91 ppb (µg L-1), a linear range of 1~200 µg L-1, an inter-assay coefficient of variation of 5.3% and good specificity. The developed method was successfully applied to the determination of As(III) in tap water and tea samples, with a recovery rate of 93.8%~105.4%, and further validated by inductively coupled plasma mass spectrometry (ICP-MS). The developed method is rapid, convenient and accurate, holding great promise in the on-site determination of As(III) in tap water and tea leaves, and it can be extended to the detection of other samples.

Oxidation of Mn(II) or As(III) by molecular oxygen is slow at pH < 9, while they can be catalytically oxidized in the presence of oxide minerals and then removed from contaminated water. However, the reaction mechanisms on simultaneous oxidation of Mn(II) and As(III) on oxide mineral surface and their accompanied removal efficiency remain unclear. This study compared Mn(II) oxidation on four common metal oxides (γ-Al2O3, CuO, α-Fe2O3 and ZnO) and investigated the simultaneous oxidation and removal of Mn(II) and As(III) through batch experiments and spectroscopic analyses. Among the tested oxides, CuO and α-Fe2O3 possess greater catalytic activity toward Mn(II) oxidation. Oxidation and removal kinetics of Mn(II) and As(III) on CuO indicate that O2 is the terminal electron acceptor for Mn(II) and As(III) oxidation on CuO, and Mn(II) acts as an electron shuttle to promote As(III) oxidation and removal. The main oxidized product of Mn(II) on CuO is high-valent MnOx species. This newly formed Mn(III) or Mn(IV) phases promote As(III) oxidation on CuO at circumneutral pH 8 and is reduced to Mn(II), which may be then released into solution. This study provides new insights into metal oxide-catalyzed oxidation of pollutants Mn(II) and As(III) and suggests that CuO should be considered as an efficient material to remediate Mn(II) and As(III) contamination.

The effect of Fe(II) concentrations on schwertmannite bio-synthesis and the As(III) removal capacity of schwertmannite were investigated in this study. Acidithiobalillus ferrooxidans (A. ferrooxidans) were inoculated into five FeSO4 systems with initial concentrations of 50, 100, 200, 300, and 400 mmol/L, respectively, to bio-synthesize schwertmannite. The Fe(II) of the systems were almost completely oxidised at 48, 72, 120, 168, and 192 h, respectively, and the bio-schwertmannite yield was 1.99, 3.81, 9.36, 12.42, and 21.60 g/L. The results of this study indicate that all minerals harvested from the different systems are schwertmannite. As the initial Fe(II) concentration increases, the effect of the minerals removing As(III) decreases; moreover, the structure and extracellular polymeric substance (EPS) of schwertmannite may regulate the As(III) removal process. The EPS generated by the A. ferrooxidans can absorb As(III). The outcomes of this study provide fresh insights into the bio-synthetic regulation of schwertmannite and play a significant role in treating As-containing groundwater.

The reutilization of exhausted biochar is attracting extensive interest among researchers. In this study, the biochar generated from Chinese fir with natural regular porous structure that adsorbed Cd2+/Ni2+ at different concentration levels was used as the precursor, and then combined with simple hydrothermal vulcanization and ion deposition to generate the p-n heterojunction between NiS and CdS compounds (NiS-CdS@C) in situ. The hybrids with 3 cycles of NiS deposition reduced the interfacial transmission resistance from 80 Ω to 40 Ω, and increased photocurrent density by 5 times, thus effectively promoting the separation of photogenerated electrons and holes. The simultaneous removal of As(III) and Cr(VI) was selected to evaluate the oxidation and reduction capacity of the visible light/NiS-CdS@C/oxalate system. The results indicated that 10 mg/L As(III) and Cr(VI) were completely and simultaneously removed with 0.75 mM oxalate addition within 40 min in the system, and the NiS-CdS@C presented good durability and stability for oxalate activation. Electron paramagnetic resonance (EPR) and quenching experiments demonstrated that oxalate was activated by holes under light to produce •CO2- and enhanced the generation of additional •OH and •O2-, further contributing to the oxidation of As(III) and reduction of Cr(VI).

Dealing with arsenic pollution has been of great concern owing to inherent toxicity of As(III) to environments and human health. Herein, a novel multilayered SnO2/PPy/β-PbO2 structure on TiO2 nanotube arrays (TNAs/SnO2/PPy/β-PbO2) was synthesized by a multi-step electrodeposition process as an efficient electrocatalyst for As(III) oxidation in aqueous solution. Such TNAs/SnO2/PPy/β-PbO2 electrode exhibited a higher charge transfer, tolerable stability, and high oxygen evolution potential (OEP). The intriguing structure with a SnO2, PPy, and β-PbO2 active layers provided a larger electrochemical active area for electrocatalytic As(III) oxidation. The as-synthesized TNAs/SnO2/PPy/β-PbO2 anode achieved drastically enhanced As(Ⅲ) conversion efficiency of 90.72% compared to that of TNAs/β-PbO2 at circa 45.4%. The active species involved in the electrocatalytic oxidation process included superoxide radical (•O2-), sulfuric acid root radicals (•SO4-), and hydroxyl radicals (•OH). This work offers a new strategy to construct a high-efficiency electrode to meet the requirements of favorable electrocatalytic oxidation properties, good stability, and high electrocatalytic activity for As(III) transformation to As(V).