BACKGROUND: Tooth-supported surgical guides have demonstrated superior accuracy compared with bone-supported guides. This study aimed to modify the fabrication of tooth-supported guides for compatibility with tumor resection procedures and investigate their accuracy.
METHODS: Patients with tumors who underwent osteotomy with the assistance of modified tooth- or bone-supported surgical guides were included. Virtual surgical planning (VSP) was employed to align three dimensional (3D) models extracted from intraoperative computed tomography (CT) images. The distances and angular deviations between the actual osteotomy plane and preoperative plane were recorded. A comparative analysis of osteotomy discrepancies between tooth-supported and bone-supported guides, as well as among tooth-supported guides based on CT, cone-beam CT (CBCT), or intraoral scanner (IOS) was conducted. The factors influencing the precision of the guides were analyzed.
RESULTS: Sixty patients with 81 resection planes were included in this study. In the tooth-supported group, the mean deviations in the osteotomy plane and angle were 1.39 mm and 4.30°, respectively, whereas those of the bone-supported group were 2.16 mm and 4.95°. In the tooth-supported isotype guide groups, the mean deviations of the osteotomy plane were 1.39 mm, 1.47 mm, 1.23 mm across CT, CBCT, and IOS, respectively. The accuracy of the modified tooth-supported guides remained consistent regardless of number and position of the teeth supporting the guide and location of the osteotomy lines.
CONCLUSIONS: The findings indicate that the modified tooth-supported surgical guides demonstrated high accuracy in the maxillofacial region, contributing to a reduction in the amount of surgically detached soft tissue.

The aim of the study was to compare the stability of the virtual surgical planning (VSP) and computer-aided design accompanied by patient-specific implants (PSIs) and conventional mini-plates in mandible advancement with bilateral sagittal split osteotomy (BSSO). This retrospective study evaluates the clinical and cephalometric records of 53 patients (12 male, 41 female) treated with BSSO in Helsinki University Hospital. Subjects were divided into two groups: VSP-PSI (21 patients: 4 male and 17 female; mean age 38 years, range 25-53 years); and conventional wafer-based repositioning with mini-plate fixation (32 patients: 8 male and 24 female; mean age 39 years, range 21-56 years). The effect of the amount and direction of the advancement on the stability was also analysed individually. The standardized lateral cephalometric radiographs in three time points were analysed to compare the groups. After surgery (T2), there were no differences between groups in cephalometric variables. During follow-up (T2-T3), the cephalometric variables in both Groups A and B were stable, so there was no difference in stability between the VSP-PSI and the conventional mini-plate groups. During follow-up, the mandibles rotated clockwise or counterclockwise, relapsed towards their original direction, and the changes were statistically significant (jaw relationship; p = 0.018, soft tissue profile; p = 0.025); when the advancement of mandible was >6 mm, the increase in gonial angle compared to mandibles advanced ≤6 mm was statistically significant (p = 0.03). VSP-PSI and conventional mini-plate fixation can be considered equally stable. Large advancements with counterclockwise rotation regardless of fixation method are more susceptible to relapse. VSP-PSI alone cannot solve the relapse-related concerns in mandible osteotomy.

Oromandibular tumors or osteoradionecrosis often lead to extensive composite defects encompassing intraoral, bone and extraoral tissues. A single flap cannot simultaneously offer sufficient bone and soft tissue. The combination of free flaps could be a prospective approach to overcome the challenge. The study aims to assess the efficacy of virtual surgical planning (VSP) and 3D printing assisted fibula osteoseptocutaneous flap (FOSCF) combined with anterolateral thigh flaps (ALT) in reconstructing extensive composite defects in the oromandibular region. A retrospective analysis was conducted on 8 patients who underwent reconstruction using FOSCFs combined with ALTs. Post-surgical excision of the lesions, we obtained mean values for the defects of intraoral soft tissue, bone, extraoral soft tissue, namely, being 42.7 cm2, 96 mm, and 68.9 cm2. The mean surgical procedures took 712.5 min. A total of 16 flaps were harvested and transplanted for the 8 patients, with all successfully surviving. Postoperatively, complications manifested as localized intraoral infections in 2 cases, intermuscular vein thrombosis in another 2 cases, and pulmonary infections in 2 patients. Two patients unfortunately experienced tumor recurrence, at 12 and 3 months post-operation respectively. For the surviving 6 patients, the average follow-up period was 12.2 months. Regarding patient satisfaction, one expressed dissatisfaction with the contour of the mandible, and two exhibited moderate trismus. Objective assessments identified 1 case of oral incontinence and 2 cases where external flap contractures were observed. All 8 patients experienced restoration of masticatory function and were able to consume a soft diet within a month post-surgery. VSP/3D printing assisted FOSCFs combined with ALTs can be performed safely to reconstruct the extensive composite tissue defects in our study, with desirable esthetic and functional results, and it is a reliable option in selecting patients with defects involving multiple tissue types. However, the benefits of this method needed more cases to validate.

OBJECTIVE: The purpose of this study was to compare computer-assisted mandibular plating to conventional plating using quantitative metrics.
METHODS: Patients scheduled to undergo mandibular reconstruction were randomized to three-dimensional modelling for preoperative plate bending or intraoperative freehand bending. Preoperative and postoperative head and neck computed tomography scans were obtained to generate computer models of the reconstruction. The overall plate surface contact area, mean plate-to-bone distance, degree of conformance, and position of the condylar head within the glenoid fossa between pre- and post-operative scans were calculated.
RESULTS: Twenty patients were included with a mean age of 57.8 years (standard deviation [SD] = 13.6). The mean follow-up time was 9.8 months (range = 1.6-22.3). Reconstruction was performed with fibular (25%) or scapular free flaps (75%). The percentage of surface contact between the reconstructive plate and mandible was improved with three-dimensional models compared to freehand bending (93.9 ± 7.7% vs. 78.0 ± 19.9%, p = 0.04). There was improved overall plate-to-bone distance (3D model: 0.7 ± 0.31 mm vs. conventional: 1.3 ± 0.8 mm, p = 0.06). Total intraoperative time was non-significantly decreased with the use of a model (3D model: 726.5 ± 89.1 min vs. conventional: 757.3 ± 84.1 min, p = 0.44). There were no differences in condylar head position or postoperative complications.
CONCLUSIONS: Computer-assisted mandibular plating can be used to improve the accuracy of plate contouring.
METHODS: 2 Laryngoscope, 134:2182-2186, 2024.

Mandibular defects can greatly affect patients\' appearance and functionality. The preferred method to address this issue is reconstructive surgery using a fibular flap. The current personalized guide plate can improve the accuracy of osteotomy and reconstruction, but there are still some problems such as complex design process and time-consuming. Therefore, we modified the conventional template to serve the dual purpose of guiding the mandible and fibula osteotomy and facilitating the placement of the pre-bent titanium.
The surgery was simulated preoperatively using Computer-Aided Design (CAD) technology. The template and truncatable reconstruction model were produced in the laboratory using 3D printing. After pre-bending the titanium plate according to the contour, the reconstruction model was truncated and the screw trajectory was transferred to form a modified osteotomy and positioning integrative template system (MOPITS). Next, the patient underwent a composite template-guided vascularized fibula flap reconstruction of the mandible. All cases were reviewed for the total operative time and accuracy of surgery.
The procedures involved 2-4 fibular segments in 15 patients, averaging 3 fibular segments per procedure. The osteotomy error is 1.01 ± 1.02 mm, while the reconstruction angular error is 1.85 ± 1.69°. The preoperative and postoperative data were compared, and both p > 0.05. During the same operation, implant placement was performed on four patients, with an average operative time of 487.25 ± 60.84 min. The remaining malignant tumor patients had an average operative time of 397.18 ± 73.09 min. The average postoperative hospital stay was 12.95 ± 3.29 days.
This study demonstrates the effectiveness of MOPITS in facilitating precise preoperative planning and intraoperative execution of fibula flap reconstruction. MOPITS represents a promising and reliable tool for reconstructive surgery, particularly for inexperienced surgeons navigating the challenges of mandible defect reconstruction.

The aim of this study was to verify treatment accuracy using virtual surgical planning (VSP) with a mandible-first sequence and strict surgical protocol to determine what surgical and methodological factors might influence outcomes. VSP transfer accuracy was evaluated retrospectively through a modified method involving voxel-based superimposition in patients who had undergone bimaxillary surgery with a mandible-first sequence to correct dentoskeletal deformities. Data analysis showed that the movements planned and those executed were substantially equivalent (p < 0.01), with the exception of mandibular and maxillary sagittal movements that were 0.72 ± 0.90 mm and 1.41 ± 1.04 mm smaller, respectively, than planned. This study showed that a mandible-first sequence is accurate for transferring virtual surgical planning intraoperatively. There are several factors involved in the proper transfer of virtual planning beyond the software, such as surgical technique and sequencing. Inaccurate sagittal movements and maxillary repositioning seem to depend mainly on surgical factors.

Although surgical accuracy has been evaluated in bi-maxillary procedures, few studies have investigated the relationship between maxillary and mandibular accuracy. The present study evaluated the effect of maxillary impaction accuracy on mandibular surgical outcome. This cohort study analyzed skeletal class III patients who underwent planned maxillary impaction in bi-maxillary surgery. The primary predictor was the difference between the virtual plan and surgical outcome in the maxilla, as determined by three-dimensional (3D) and vertical differences. The secondary predictors were the planned 3D distances in the maxilla and mandible. The primary outcome was mandibular surgical accuracy, defined as the difference between the planned and actual outcomes, calculated as 3D Euclidean distance. The study included 73 patients. Increased differences between the planned and actual outcomes in the maxilla were associated with increased differences in the mandible. The post-operative position of the mandible was closer to the planned position when the position of the impacted maxilla was superior than when it was inferior to the planned position. Moving the maxilla closer to the planned position resulted in a more accurate mandibular position. These findings suggest that careful surgical procedures are needed to avoid inferior positioning of the maxilla during maxillary impaction surgery.

The aim of this study was to investigate the value of 3D Statistical Shape Modelling for orthognathic surgery planning. The goal was to objectify shape variations in the orthognathic population and differences between male and female patients by means of a statistical shape modelling method. Pre-operative CBCT scans of patients for whom 3D Virtual Surgical Plans (3D VSP) were developed at the University Medical Center Groningen between 2019 and 2020 were included. Automatic segmentation algorithms were used to create 3D models of the mandibles, and the statistical shape model was built through principal component analysis. Unpaired t-tests were performed to compare the principal components of the male and female models. A total of 194 patients (130 females and 64 males) were included. The mandibular shape could be visually described by the first five principal components: (1) The height of the mandibular ramus and condyles, (2) the variation in the gonial angle of the mandible, (3) the width of the ramus and the anterior/posterior projection of the chin, (4) the lateral projection of the mandible\'s angle, and (5) the lateral slope of the ramus and the inter-condylar distance. The statistical test showed significant differences between male and female mandibular shapes in 10 principal components. This study demonstrates the feasibility of using statistical shape modelling to inform physicians about mandible shape variations and relevant differences between male and female mandibles. The information obtained from this study could be used to quantify masculine and feminine mandibular shape aspects and to improve surgical planning for mandibular shape manipulations.

UNASSIGNED: Familial gigantiform cementoma (FGC) is a rare benign fibrocemento-osseous lesion of the jaw characterized by well-circumscribed, extensive, mixed radiolucent-radiopaque masses in the mandible and the maxilla that can cause severe facial deformity. This condition is extremely rare with less than 40 cases reported in the literature.
UNASSIGNED: The purpose of the paper is to highlight the importance of virtual surgical planning and patient-specific implant in the treatment of a complex lesion and reconstruction of the facial skeleton. The clinical presentations, and diagnostic challenges encountered when managing the lesion have been discussed in this article with emphasis on the treatment plan.
UNASSIGNED: The sequence of treatment planned was resection of the lesion and immediate reconstruction with a patient-specific implant to improve the patient\'s quality of life. The management of FGC was a challenging one keeping in mind the rapid expansion of the lesion, widespread involvement of the jaws, and needs of the pediatric patient.
UNASSIGNED: Virtual surgical planning (VSP) along with 3D printed implant was instrumental in reconstructing the facial form of the child where the maxilla was completely resected and rehabilitation provided support to the vital structures of the face.

Digital surgical planning (DSP) has revolutionized the preparation and execution of the management of complex head and neck pathologies. The addition of virtual reality (VR) allows the surgeon to have a three-dimensional experience with six degrees of freedom for visualizing and manipulating objects. This pilot study describes the participants experience with the first head and neck reconstructive VR-DSP platform.
An original VR-DSP platform has been developed for planning the ablation and reconstruction of head and neck pathologies. A prospective trial utilizing this platform involving reconstructive surgeons was performed. Participants conducted a simulated VR-DSP planning session, pre- and post-questionnaire as well as audio recordings allowing for qualitative analysis.
Thirteen consultant reconstructive surgeons representing three surgical backgrounds with varied experience were recruited. The majority of surgeons had no previous experience with VR. Based on the system usability score, the VR-DSP platform was found to have above average usability. The qualitative analysis demonstrated the majority had a positive experience. Participants identified some perceived barriers to implementing the VR-DSP platform.
Virtual reality-digital surgical planning is usable and acceptable to reconstructive surgeons. Surgeons were able to perform the steps in an efficient time despite limited experience. The addition of VR offers additional benefits to current VSP platforms. Based on the results of this pilot study, it is likely that VR-DSP will be of benefit to the reconstructive surgeon.