BACKGROUND: Orthognathic surgery brings about a harmonious relationship between jaws, resulting in improved facial aesthetics. It is key to analyze if satisfactory results can be attained by using virtual surgical planning for orthognathic procedures so as to recommend it for routine clinical practice.
OBJECTIVE: The aims of this study were to evaluate the various soft tissue changes that take place following orthognathic surgery using three-dimensional (3D) imaging and virtual surgical planning software and quantify the accuracy of virtual surgical planning software on patients undergoing orthognathic surgery.
METHODS: This is an observational prospective study with a sample size of 12.
METHODS: In this prospective study, 12 patients undergoing orthognathic surgery were included following the inclusion and exclusion criteria. A usual pre-surgical work-up was done and a 3D replica of the facial skeleton was formulated using the software with the DICOM data acquired from the patient i.e., CT and scans of patient\'s dentition. Virtual surgical planning was done and splints were manufactured according to the desired newly achieved position. Patients were operated following the virtual surgical plan guided by the computer-aided design and computer-aided manufacturing (CAD-CAM) splints. Post-operative evaluation was done. As the study is more of a descriptive study to obtain detailed knowledge of a new procedure, only one group is being studied and hence there is no statistical testing included in this study.
RESULTS: The mean discrepancy noticed after superimposition of soft tissue points was 0.92 with a standard deviation of 0.3.
CONCLUSIONS: 3D CT virtual surgical planning is a reliable tool to achieve predictable and reliable post-operative results in orthognathic surgical cases.

Background: The current high standards in orthognathic surgery demand surgical solutions that are both ⁠ functionally ⁠ effective and aesthetically pleasing. Our approach offers one for enhanced stability, attractiveness, and nerve protection ⁠ with improved accessibility ⁠ in the majority of orthognathic scenarios ⁠ compared to an inverted L osteotomy. Methods: A case series is presented to illustrate the application and outcomes of HSSO, an optimised approach that combines the advantages of a transoral inverted L osteotomy with specific enhancements and increased versatility, ⁠ with accessibility and exposure similar to a BSSO. Results: HSSO as a completely transoral technique, demonstrate the ability to perform significant counterclockwise rotations of the mandible, eliminating the need for trocars or skin incisions. We experinced high postoperative stability when HSSO was performed in conjunction with a three-piece LeFort 1 osteotomy on a dynamic opposing arch. In comparison to an inverted L approach, we postulated that HSSO offers advantages in stability, due to the increased segmental overlap of the proximal and distal segments of the mandible. This approach is designed to enhance the safety of the inferior alveolar nerve compared to traditional sagittal split methods. Furthermore, HSSO represents an alternative to total joint replacement in select cases of idiopathic condylar resorption and is effective for correcting mandibular asymmetries while maintaining jawline aesthetics. This is achieved through the manipulation of the mandibular angle, ramus height, and inferior border without creating a step deformity in the soft tissue. Conclusions: The outcomes of HSSO highlight its capacity to deliver predictable, functional, and aesthetically pleasing results, offering a viable alternative to more traditional orthognathic techniques.

UNASSIGNED: Maxillary reconstruction is often a challenging task for the surgeons because of the complex anatomy. However, with the advances in virtual surgical planning (VSP) and 3D printing technology there is a new avenue for the surgeons which offers a suitable alternative to conventional flap-based reconstructions.
UNASSIGNED: In this article, we have described 4 case scenarios which were managed with the help of VSP and additive manufacturing technology for complex maxillary reconstruction procedures. Use of the technologies aided the clinician in achieving optimal outcomes with regards to form, function and esthetics.
UNASSIGNED: Virtual surgical planning (VSP) has gained a lot of impetus in past 1 decade. These aides the surgeon in determining the extent of disease and also carry out the treatment planning. In addition to VSP, the concept of additive manufacturing provides a viable alternative to the conventional reconstruction modalities for maxillary defect rehabilitation. Increased accuracy, rehabilitation of normal anatomical configuration, appropriate dental rehabilitation, decreased intra-operative time and post-operative complications are some of the advantages. In addition, patient-specific implants eliminate the need for a separate donor site. Apart from the treatment of pathologies, they also can be used for reconstruction of post-traumatic defect, where endosteal implant placement is not possible.
UNASSIGNED: These modalities show promising results for reconstruction of complex maxillary defects.

Augmented reality (AR) is a promising technology to enhance image guided surgery and represents the perfect bridge to combine precise virtual planning with computer-aided execution of surgical maneuvers in the operating room. In craniofacial surgical oncology, AR brings to the surgeon\'s sight a digital, three-dimensional representation of the anatomy and helps to identify tumor boundaries and optimal surgical paths. Intraoperatively, real-time AR guidance provides surgeons with accurate spatial information, ensuring accurate tumor resection and preservation of critical structures. In this paper, the authors review current evidence of AR applications in craniofacial surgery, focusing on real surgical applications, and compare existing literature with their experience during an AR and navigation guided craniofacial resection, to subsequently analyze which technological trajectories will represent the future of AR and define new perspectives of application for this revolutionizing technology.

OBJECTIVE: This pilot study aims to evaluate the feasibility and effectiveness of computer-assisted surgery protocol with 3D-preformed orbital titanium mesh (3D-POTM), using presurgical virtual planning and intraoperative navigation in primary inferomedial orbital fracture reconstruction.
METHODS: Between March 2021 and March 2023, perioperative data of patients undergoing surgery for unilateral inferomedial orbital fracture treated with 3D-POTM were analyzed. Presurgical virtual planning with a Standard Triangle Language file of preformed mesh was conducted using the mirrored unaffected contralateral side as a reference, and intraoperative navigation was used. The reconstruction accuracy was determined by: correspondence between postoperative reconstruction mesh position with presurgical virtual planning and difference among the reconstructed and the unaffected orbital volume. Pre- and postoperative diplopia and enophthalmos were assessed.
RESULTS: Twenty-six patients were included. Isolated orbital floor fracture was reported in 14 (53.8%) patients, meanwhile medial wall and floor one in 12 (46.1%) cases. The mean difference between final plate position and ideal digital plan was 0.692 mm (95% CI: 0.601-0.783). The mean volume difference between reconstructed and unaffected orbit was 1.02 mL (95% CI: 0.451-1.589). Preoperative diplopia was settled out in all cases and enophthalmos in 19 (76.2%) of 21 patients.
CONCLUSIONS: The proposed protocol is an adaptable and reliable workflow for the early treatment of inferomedial orbital fractures. It enables precise preoperative planning and intraoperative procedures, mitigating pitfalls and complications, and delivering excellent reconstruction, all while maintaining reasonable costs and commitment times.

OBJECTIVE: To compare the changes in condylar position after mandibular reconstruction with free fibular flap(FFF) and the differences between computer-assisted techniques and traditional methods on CT images.
METHODS: Thirty-four patients who underwent mandibular reconstruction with free fibular flap were selected according to the inclusion and exclusion criteria. In the 3D group, virtual surgical planning (VSP) with osteotomy cutting plate and placement guiding plate were used, while the traditional group underwent freehand reconstruction. The CT data of 68 temporomandibular joints (TMJs) were recorded before and immediately after surgery. The condylar position was evaluated by measuring the anterior space (AS), posterior space (PS) and superior space (SS), and the ln (PS/AS) was calculated according to the method proposed by Pullinger and Hollender.
RESULTS: In the patients included in the 3D group, the condyle on the ipsilateral side moved slightly backward; however, in the patients in the traditional group, the ipsilateral side moved considerably anteroinferior. No obvious changes on the contralateral side were noted. In the 3D group, 33% of ipsilateral condyles were in the posterior position postoperatively when compared with the preoperative position (13%). In the traditional group, the number of ipsilateral condyles in the anterior position increased from 4 to 10, accounting for 53% postoperatively. Contrary to the traditional group, the 3D group presented less condylar displacement on the ipsilateral side postoperatively.
CONCLUSIONS: This study showed a decreased percentage of change in condylar position postoperatively when VSP was used. Virtual surgical planning improved the accuracy of FFF mandibular reconstruction and made the condylar position more stable.

UNASSIGNED: The purpose of this study was to compare the accuracy of hard tissues movements planned to result of the maxillary and mandibular positions between conventional surgical planning (CSP) and virtual surgical planning (VSP) in patients undergoing orthognathic surgery.
UNASSIGNED: A systematic electronic search was carried out in six databases and gray literature with no restriction of publication date and language. Clinical observational studies that compared accuracy of maxillary position between CSP and VSP were included. Linear measurements of the mandible in the transverse plane and linear measurements of the maxilla in the vertical, horizontal and transverse planes were considered for analysis, comparing planned to postoperative outcomes of CSP and VSP. Cochrane tool was used to assess bias risk. A meta-analysis was performed to summarize similar results by using the Review Manager 5.3 software. Significance level was set at 5%.
UNASSIGNED: Six studies (2 RCT and 4 retrospective cohorts) were included according to inclusion and eligibility criteria, involving 255 patients. The inter-rater reliability of selection and eligibility was excellent (k = 0.8315 and k = 0.9329, respectively). Two studies presented that VSP seemed to have better results than CSP regarding linear measurements of the mandible in the transverse plane. Results from CSP and VSP were similar in accuracy for hard tissue in vertical plane of maxillary position (I2 = 0%; p = 0.17), although VSP was more accurate in horizontal plane (I2 = 0%; p = 0.02).
UNASSIGNED: VSP presented better accuracy for transverse movements in mandible of asymmetric patients. VSP showed to be more accurate for movements in the horizontal plane, and qualitative analysis seemed to be more effective for transverse movements.

UNASSIGNED: Ameloblastoma is a rare odontogenic tumor most commonly located within the mandible. These tumors can grow to massive proportions and result in malocclusion. Segmental mandibulectomy and reconstruction with an osteocutaneous free flap are frequently required. Virtual surgical planning (VSP) aids the surgeon in creating precise anatomic reconstruction when there is preoperative malocclusion due to tumor size. In this study we seek to further examine reconstruction of posterior mandibulectomy defects inclusive of condylar resection.
UNASSIGNED: Retrospective review of patients treated for giant ameloblastoma (tumor >4 cm) was examined; 3 patients with posterior tumors requiring ramus and condylar resection were included. Reconstruction in all patients was performed using fibula free flaps and VSP custom-made mandibular reconstruction plates. In these patients the reconstructed ramus was shortened and precise contouring done with a burr to recreate the native condylar surface. Intermaxillary fixation was used to maintain occlusion for 1 month postoperatively. Inferior alveolar nerve repair with allograft and nerve connectors was performed for all 3 patients.
UNASSIGNED: All patients underwent successful mandibular reconstruction with preservation of mandibular function and improved occlusion postoperatively. Inferior alveolar nerve repair using nerve allograft allowed for neurosensory recovery in the mandibular division of trigeminal nerve distribution in 2 of the 3 patients.
UNASSIGNED: Giant ameloblastoma involving the mandibular condyle can be successfully treated with the fibula free flap utilizing mandible reconstruction plates and VSP. This technique allows for excellent restoration of occlusion and neurosensory recovery when paired with reconstruction of the inferior alveolar nerve at time of reconstruction.

Bone defects within the cranio-orbital complex present unique challenges in terms of surgical planning and reconstruction. This article presents a novel approach using PEEK material and advanced surgical technologies to address these challenges. A retrospective analysis of 15 patients who underwent craniofacial reconstruction using patient-specific polyetheretherketone (PEEK) implants between 2016 and 2021 was carried out. Comprehensive preoperative planning was performed, utilizing advanced imaging techniques and specialized software for virtual surgical planning. Patient-specific PEEK PSIs were designed and manufactured based on the preoperative plan. Intraoperative navigation was used to guide the surgical procedure, enabling precise osteotomy and optimal implant placement. This article describes the step-by-step process and the tools utilized in each phase. The etiologies were as follows: meningioma in seven cases, benign lesions in five cases, malignant tumors in two cases, and trauma sequelae in one case. In all cases, 3D-printed PEEK implants were utilized to achieve precise reconstruction. No major complications were described. In one case, an implant replacement was needed with successful outcomes. Our study demonstrates the feasibility and effectiveness of using PEEK patient-specific implants for personalized craniofacial reconstruction. The combination of advanced imaging, virtual planning, and CAD-CAM technology contributes to improved surgical outcomes in terms of oncologic margin control, functional restoration, and aesthetic results.

OBJECTIVE: The aortic root (AoR) rotation and its spatial morphology at the base of the heart were postulated but not described in every detail. AoR rotation modalities may play an important role in decision-making during AoR surgery and its outcome. The aim was to provide a detailed spatial anatomy of the AoR rotation and its relation to the vital surrounding structure.
METHODS: The AoR rotation and its relation to the surrounding structure were assessed in 104 patients with tricuspid aortic valve. The interatrial septum was chosen as a reference to describe AoR rotation that marked the midline of the heart base as a landmark for the AoR rotation direction. Intermediate, clockwise and counterclockwise AoR rotations were defined based on the mentioned reference structures.
RESULTS: The AoR rotation was successfully assessed in 104 patients undergoing ascending aorta and or AoR intervention by multidetector row computed tomography. AoR was positioned normally in 53.8% of cases (n = 56) and rotated counterclockwise in 5.8% (n = 6) and clockwise in 40.4% (n = 42) of cases. In clockwise AoR rotation, the right coronary sinus was positioned in proximity to the right atrium and of the tricuspid valve, whereas in a counterclockwise rotation, the noncoronary sinus was placed over the tricuspid valve just over the membranous septum.
CONCLUSIONS: The AoR\'s rotation can be diagnosed using multidetector row computed tomography. Understanding the anatomy of the aortic valve related to rotational position helps guide surgical decision-making in performing AoR reconstruction.