BACKGROUND: Ultrasound is gaining popularity for diagnosing scaphoid fractures. However, it hasn\'t been used to assess fracture displacement, such as humpback deformity. We propose a sonographic method to measure the intra-scaphoid angle, potentially serving as an alternative to CT scans for detecting fragment malposition after a scaphoid fracture.
METHODS: We recruited 11 healthy adult volunteers without wrist pathology and performed bilateral wrist ultrasounds, totaling 22 examinations. Each wrist was splinted at 50 ° extension and fully supinated. Two hand surgeons independently performed the ultrasounds. All images were then evaluated separately by two evaluators. The following measurements were taken: 1. Inter-poles distance (IPD): Distance between the summits of the two scaphoid poles on the palmar cortex. 2. Palmar cortical intra-scaphoid angle (PCISA): Angle between the two summits and the deepest point of the waist on the palmar cortex. Measurements were compared for inter-investigator and inter-evaluator reliability using the intraclass correlation coefficient (ICC).
RESULTS: The study included four males and seven females, with an average age of 35 years (range 21-56). The mean PCISA was 142 ° (SD 10 °) and the mean IPD was 16.3 mm (SD 2.1 mm). Differences in IPD measurements averaged 0.3 mm (range 0-5.2 mm) among investigators and 1.0 mm (range 0.1-3.8 mm) among evaluators. For PCISA, the differences averaged 4 ° (range 0-17 °) among investigators and 6 ° (range 0-15 °) among evaluators. The ICC for IPD was 0.804 (investigators) and 0.572 (evaluators); for PCISA, it was 0.704 (investigators) and 0.602 (evaluators).
CONCLUSIONS: This study presents a cost-effective and accessible sonographic technique to measure the intra-scaphoid angle. Further research is required to assess its effectiveness in scaphoid fractures and compare it to CT-based measurements like the H/L ratio, LISA, and DCA.

OBJECTIVE: Multiple fixation methods with or without vascularized graft have been described to treat scaphoid nonunions. This study aimed to assess the incidence of carpal malalignment and the degree of ulnar carpal translocation after scaphoid volar plate fixation with pedicled vascularized bone graft in scaphoid waist nonunions with humpback deformity.
METHODS: A retrospective cohort study of individuals with recalcitrant scaphoid fracture nonunion treated with volar scaphoid plating and vascularized bone graft was analyzed. All patients had radiographs with the wrist at neutral with clinical follow-up of at least 3 months after surgery. Ulnar subluxation of the carpus was assessed by the change in lunate uncovering and carpal-radial distance before and after surgery.
RESULTS: Seventeen patients were included for analysis. Average age was 26 years with an average follow-up interval of 11.0 months. After surgery, 16 patients (94.1%) had fracture union. Between preoperative and initial postoperative imaging, there was an increase in lunate uncovering (mean difference: 8.8%; 95% confidence interval, 4.6% to 13.1%) and carpal-radial distance (mean difference: 3.3% ulnar shift; 95% confidence interval, 1.1% to 5.4%). After surgery, there was minimal change in lunate uncovering and carpal-radial distance from immediately after surgery to final follow-up.
CONCLUSIONS: Preoperative lunate uncovering was lower than normal values, suggesting an abnormal radial shift of the carpus with a collapsed scaphoid. Postoperative lunate uncovering was similar to normal values, reflecting an ulnar shift of the carpus after operative intervention.
METHODS: Therapeutic IV.

OBJECTIVE: The aim of the study is to perform a systematic review and meta-analysis comparing the diagnostic performance of artificial intelligence (AI) and human readers in the detection of wrist fractures.
METHODS: This study conducted a systematic review following PRISMA guidelines. Medline and Embase databases were searched for relevant articles published up to August 14, 2023. All included studies reported the diagnostic performance of AI to detect wrist fractures, with or without comparison to human readers. A meta-analysis was performed to calculate the pooled sensitivity and specificity of AI and human experts in detecting distal radius, and scaphoid fractures respectively.
RESULTS: Of 213 identified records, 20 studies were included after abstract screening and full-text review. Nine articles examined distal radius fractures, while eight studies examined scaphoid fractures. One study included distal radius and scaphoid fractures, and two studies examined paediatric distal radius fractures. The pooled sensitivity and specificity for AI in detecting distal radius fractures were 0.92 (95% CI 0.88-0.95) and 0.89 (0.84-0.92), respectively. The corresponding values for human readers were 0.95 (0.91-0.97) and 0.94 (0.91-0.96). For scaphoid fractures, pooled sensitivity and specificity for AI were 0.85 (0.73-0.92) and 0.83 (0.76-0.89), while human experts exhibited 0.71 (0.66-0.76) and 0.93 (0.90-0.95), respectively.
CONCLUSIONS: The results indicate comparable diagnostic accuracy between AI and human readers, especially for distal radius fractures. For the detection of scaphoid fractures, the human readers were similarly sensitive but more specific. These findings underscore the potential of AI to enhance fracture detection accuracy and improve clinical workflow, rather than to replace human intelligence.

UNASSIGNED: Scaphoid waist fractures are often stabilised with compression screws, Kirschner wires (K-wires), or a combination of both. While clinical and bio-mechanical studies evaluating their utility are available, the ideal configuration of implant that would provide adequate stability to permit early use of the hand is debatable. We examined configurations of a single screw, one screw along with a K-wire, and two K-wires used for a transverse scaphoid waist fracture fixation aiming to assess the stability provided by each in the immediate postoperative period.
UNASSIGNED: Computer-aided design (CAD) models of the scaphoid, K-wire, and headless compression screw were created. A transverse fracture was created at the scaphoid waist, and the CAD models of the screw and K-wire were used to fix the fracture in different configurations in a distal to proximal direction. Finite Element Analysis (FEA) was used to examine the strength of configurations when they were subjected to compression and distraction forces. The total maximum deformation (TDef) and factor of safety (FoS) for each configuration were calculated and used as indirect indicators of postoperative stability.
UNASSIGNED: When a single screw was used, the configurations with the screw directed posteriorly from either centre or anterior had the best combined TDef and FoS values. For one screw and one K-wire, the configuration with screw and K-wire parallel to each other with the screw located along the long axis in the AP projection and anterior to the K-wire in the lateral projection had the best combined TDef and FoS values. When using two K-wires, configurations with the two wires diverging proximally on the lateral projection had the best combined TDef and FoS values.
UNASSIGNED: When fixing a transverse scaphoid waist fracture with a single screw, the screw directed posteriorly from either the centre or anterior aspect of the distal pole has the best stability, a parallel configuration has the best stability when fixing it using a screw and a K-wire, and divergent configuration has the best stability when fixing it with two K-wires only.

Background: Several operative treatments exist for scaphoid fractures, varying by approach (e.g., ercutaneous, volar, or dorsal), implant type (e.g., screw or Kirschner wire), and bone raft choice (e.g., none, nonvascularized, or vascularized). Many previous systematic eviews and meta-analyses have investigated outcomes following different surgicalÚpproaches, the use of vascularized versus nonvascularized bone graft for scaphoidßracture nonunions, and treatment for specific fracture patterns. However, given the advancements n scaphoid fracture treatment in recent years, there is a need for updated treatment recommendations hat would be beneficial to hand surgeons. Purpose: We present a comprehensive review of the operative treatment of scaphoid fractures based on recent literature and propose a unified treatment algorithm for managing these fractures. Methods: The English-language literature was searched from 2002 to 2023 for high evidence level (e.g., randomized trials), review, and meta-analysis articles with the following search terms: \"scaphoid, \"u8220\"scaphoid\" AND \"nonunion, \" and \"scaphoid\" AND \"malunion. \" Each article was creened by the authors to determine the scaphoid fracture scenario addressed and ubsequent treatment recommendations. The findings from article reviews were then rganized by scaphoid fracture types in this manuscript. Results: A total of 95 pertinent articles were ultimately selected and used as the basis for reviewing different scaphoid fracture scenarios. A treatment algorithm was then proposed based on literature review. Conclusion: This summary of the recent literature can guide hand surgeons in addressing scaphoidßractures. Future research in scaphoid fracture treatment, particularly for nonunions, would be most beneficial n the form of systematic review, meta-analysis, or multicenter prospective randomized clinical trials. Level of Evidence: IV.

Caring for hand and wrist injuries in the elite athlete brings distinct challenges, with case-by-case decisions regarding surgical intervention and return-to-play. Metacarpal fractures, thumb ulnar collateral ligament tears, and scaphoid fractures are common upper-extremity injuries in the elite athlete that can be detrimental to playing time and future participation. Treatment should therefore endure the demand of accelerated rehabilitation and return-to-activity without compromising long-term outcomes. Fortunately, the literature has supported emerging management options that support goals specific to the athlete. This review examined the advances in surgical and perioperative treatment of metacarpal fractures, thumb ulnar collateral ligament injuries, and scaphoid fractures in the elite athlete.

OBJECTIVE: To review the existing literature to (1) determine the diagnostic efficacy of artificial intelligence (AI) models for detecting scaphoid and distal radius fractures and (2) compare the efficacy to human clinical experts.
METHODS: PubMed, OVID/Medline, and Cochrane libraries were queried for studies investigating the development, validation, and analysis of AI for the detection of scaphoid or distal radius fractures. Data regarding study design, AI model development and architecture, prediction accuracy/area under the receiver operator characteristic curve (AUROC), and imaging modalities were recorded.
RESULTS: A total of 21 studies were identified, of which 12 (57.1%) used AI to detect fractures of the distal radius, and nine (42.9%) used AI to detect fractures of the scaphoid. AI models demonstrated good diagnostic performance on average, with AUROC values ranging from 0.77 to 0.96 for scaphoid fractures and from 0.90 to 0.99 for distal radius fractures. Accuracy of AI models ranged between 72.0% to 90.3% and 89.0% to 98.0% for scaphoid and distal radius fractures, respectively. When compared to clinical experts, 13 of 14 (92.9%) studies reported that AI models demonstrated comparable or better performance. The type of fracture influenced model performance, with worse overall performance on occult scaphoid fractures; however, models trained specifically on occult fractures demonstrated substantially improved performance when compared to humans.
CONCLUSIONS: AI models demonstrated excellent performance for detecting scaphoid and distal radius fractures, with the majority demonstrating comparable or better performance compared with human experts. Worse performance was demonstrated on occult fractures. However, when trained specifically on difficult fracture patterns, AI models demonstrated improved performance.
CONCLUSIONS: AI models can help detect commonly missed occult fractures while enhancing workflow efficiency for distal radius and scaphoid fracture diagnoses. As performance varies based on fracture type, future studies focused on wrist fracture detection should clearly define whether the goal is to (1) identify difficult-to-detect fractures or (2) improve workflow efficiency by assisting in routine tasks.

OBJECTIVE: Scaphoid fractures in patients and assessment of healing using PCD-CT have, as far as we know, not yet been studied. Therefore, the aim was to compare photon counting detector CT (PCD-CT) with energy integrating detector CT (EID-CT) in terms of fracture visibility and evaluation of fracture healing.
METHODS: Eight patients with scaphoid fracture were examined with EID-CT and PCD-CT within the first week post-trauma, and with additional scans at 4, 6 and 8 weeks. Our clinical protocol for wrist examination with EID-CT was used (CTDIvol 3.1 ± 0.1 mGy, UHR kernel Ur77). For PCD-CT matched radiation dose, reconstruction kernel Br89. Quantitative analyses of noise, CNR, trabecular and cortical sharpness, and bone volume fraction were conducted. Five radiologists evaluated the images for fracture visibility, fracture gap consolidation and image quality, and rated their confidence in the diagnosis.
RESULTS: The trabecular and cortical sharpness were superior in images obtained with PCD-CT compared with EID-CT. A successive reduction in trabecular bone volume fraction during the immobilized periods was found with both systems. Despite higher noise and lower CNR with PCD-CT, radiologists rated the image quality of PCD-CT as superior. The visibility of the fracture line within 1-week post-trauma was rated higher with PCD-CT as was diagnostic confidence, but the subsequent assessments of fracture gap consolidation during healing process and the confidence in diagnosis were found equivalent between both systems.
CONCLUSIONS: PCD-CT offers superior visibility of bone microstructure compared with EID-CT. The evaluation of fracture healing and confidence in diagnosis were rated equally with both systems, but the radiologists found primary fracture visibility and overall image quality superior with PCD-CT.

OBJECTIVE: To Investigate the value of 3D printed guide-assisted percutaneous management of minimally displaced scaphoid waist fractures(Herbert\'s B2) with delayed diagnosis or presentation.
METHODS: From October 2018 to February 2022, 10 patients with established delayed diagnoses and presentation of minimally displaced scaphoid waist fractures were treated with 3D printed guides assisted with percutaneous internal fixation without bone grafting. This technique was based on the patient\'s preoperative CT and imported into the software. Based on Boolean subtraction, the most centralized screw placement position was identified and a customized guide was produced. Intraoperative percutaneous insertion of the guide wire was assisted by the custom guide.
RESULTS: All 10 patients were successful in one attempt. The fractures healed at a mean of 7.7 weeks postoperatively (range 6-10 weeks). At a mean follow-up of 7.7 months (6-13 months), patients had excellent recovery of wrist function with minimal pain reduction. There were no major postoperative complications and the patients all returned to their previous activities before the injury.
CONCLUSIONS: Percutaneous internal fixation based on 3D printed guides is a safe and effective technique for delayed diagnosis or presentation of patients with minimally displaced fractures of the scaphoid waist. This method allows for easy insertion of screws and avoids multiple attempts.

OBJECTIVE: To demonstrate the potential of low-dose ultra-high-resolution CT (UHRCT) images to generate high-quality radiographic images on extremity phantoms and to estimate the radiation dose required for this.
METHODS: A hand and knee phantom containing real human bones was imaged on an UHRCT scanner at full-dose, half-dose, and quarter-dose levels using a high-resolution extremity protocol. The raw data was reconstructed using both filtered back projection (FBP) and an iterative reconstruction algorithm (AIDR3D). Using custom designed software, each CT volume data set was converted to attenuation coefficients, and then a synthesized radiograph (synDX) was generated by forward projecting the volume data sets from a point source onto a 2D synthetic detector. The signal-to-noise ratio (SNR) was measured in the synDXs across all dose levels and the root-mean-squared error (RMSE) was computed with the FD synDXs as the reference.
RESULTS: The proposed workflow generates high-quality synDXs at any arbitrary angle. For FBP, the SNR largely tracked with the radiation dose levels for both the knee and hand phantoms. For the knee phantom, iterative reconstruction provided a 6.1% higher SNR when compared to FBP. The RMSE was overall higher for the lowest dose levels and monotonically decreased with increasing dose. No substantial differences were observed qualitatively in the visualization of skeletal detail of the phantoms.
CONCLUSIONS: The fine detail provided by UHRCT acquisitions of extremities facilitates the ability to generate quality radiographs, potentially eliminating the need for additional scanning on a conventional digital radiography system.