Increasing consumption of pharmaceuticals and the respective consequences for the aquatic environment have been the focus of many studies over the last thirty years. Various aspects in this field were investigated, considering diverse pharmaceutical groups and employing a wide range of research methodologies. Various questions from the perspectives of different research areas were devised and answered, resulting in a large mix of individual findings and conclusions. Collectively, the results of the studies offer a comprehensive overview. The large variety of methods and strategies, however, demands close attention when comparing and combining information from heterogeneous projects. This review critically examines the application of diverse sampling techniques as well as analytical methods in investigations concerning the behavior of pharmaceutically active compounds (PhACs) and contrast agents (CAs) in wastewater treatment plants (WWTPs). The combination of sampling and analysis is discussed with regard to its suitability for specific scientific problems. Different research focuses need different methods and answer different questions. An overview of studies dealing with the fate and degradation of PhACs and CAs in WWTPs is presented, discussing their strategic approaches and findings. This review includes surveys of anticancer drugs, antibiotics, analgesics and anti-inflammatory drugs, antidiabetics, beta blockers, hormonal contraceptives, lipid lowering agents, antidepressants as well as contrast agents for X-ray and magnetic resonance imaging.

The effluent of WWTPs is an important source of microplastics (MP) for the aquatic environment. In this review study, MPs in wastewater treatment plants (WWTP) in Türkiye and their removal from WWTPs are reviewed for the first time. First, MP characteristics in the influent and effluent of WWTPs in Türkiye are discussed. In the next section, the abundance of MPs in the influent and effluent of WWTPs in Türkiye and the MP removal efficiency of WWTPs in Türkiye are evaluated. Then, the results of studies on MP abundance and characteristics in Türkiye\'s aquatic environments are presented and suggestions are made to reduce MPs released from WWTPs into the receiving environments. Strategies for reducing MPs released to the receiving environment from WWTPs of Türkiye are summarized. In the last section, research gaps regarding MPs in WWTPs in Türkiye are identified and suggestions are made for future studies. This review paper provides a comprehensive assessment of the abundance, dominant characteristics, and removal of MPs in WWTPs in Türkiye, as well as the current status and deficiencies in Türkiye. Therefore, this review can serve as a scientific guide to improve the MP removal efficiency of WWTPs in Türkiye.

Global water demand and environmental concerns related to climate change require industries to develop high-efficiency wastewater treatment methods to remove pollutants. Likewise, toxic pollutants present in wastewater negatively affect the environment and human health, requiring effective treatment. Although conventional treatment processes remove carbon and nutrients, they are insufficient to remove pharmaceuticals, pesticides, and plasticizers. Electrochemical processes effectively remove pollutants from wastewater through the mineralization of non-biodegradable pollutants with consequent conversion into biodegradable compounds. Its advantages include easy operation, versatility, and short reaction time. In this way, this review initially provides a global water scenario with a view to the future. It comprises global demand, treatment methods, and pollution of water resources, addressing various contaminants such as heavy metals, nutrients, organic compounds, and emerging contaminants. Subsequently, the fundamentals of electrochemical treatments are presented as well as electrochemical treatments, highlighting the latest studies involving electrocoagulation, electroflocculation, electroflotation, capacitive deionization and its derivatives, eletrodeionization, and electrochemical advanced oxidation process. Finally, the challenges and perspectives were discussed. In this context, electrochemical processes have proven promising and effective for the treatment of water and wastewater, allowing safe reuse practices and purification with high contaminant removal.

AbstractPharmaceutical compounds are a significant source of environmental pollution, particularly in hospital wastewater, which contains high concentrations of such compounds. Constructed wetlands have emerged as a promising approach to removing pharmaceutical compounds from wastewater. This paper aims to review the current state of knowledge on the removal of pharmaceutical compounds from hospital wastewater using constructed wetlands, including the mechanism of removal, removal efficiency, and future prospects. Pharmaceutical contaminants have been considered to be one of the most emerging pollutants in recent years. In this review article, various studies on constructed wetlands are incorporated in order to remove the pharmaceutical contaminants. The nature of constructed wetland can be explained by understanding the types of constructed wetland, characteristics of hospital wastewater, removal mechanism, and removal efficiency. The results of the review indicate that constructed wetlands are effective in removing pharmaceutical compounds from hospital wastewater. The removal mechanism of these compounds involves a combination of physical, chemical, and biological processes, including adsorption, degradation, and uptake by wetland plants. The removal efficiency of constructed wetlands varies depending on several factors, including the type and concentration of pharmaceutical compounds, the design of the wetland system, and the environmental conditions. Further research is necessary to optimize the performance of these systems, particularly in the removal of emerging contaminants, to ensure their effectiveness and long-term sustainability.

Ibuprofen and acetaminophen as two anti-fever agents have been widely used in human. Due to lack of full understanding, this work firstly summarized their occurrence and fate in municipal wastewater treatment plants (WWTPs) across 30 countries. The respective influent concentrations of ibuprofen and acetaminophen were not detected (ND)-39,830,000 and ND-66440000 ng/L, while their corresponding respective effluent concentrations were ND-58710 and ND-90500 ng/L. The removal efficiencies of ibuprofen and acetaminophen in municipal WWTPs were 6.5-100 % and 14.3-100 % with respective average removal efficiencies of 87.6 % and 94.7 %. There have been many batch studies on ibuprofen biodegradation with kbio values available, while such investigation for acetaminophen was very limited. The theoretically calculated removal efficiency of ibuprofen with kbio agreed well with that of the observed average removal efficiency of on-site investigations on full-scale WWTP, which was quite different from natural estrogens and some other emerging contaminants. One possible reason is that conjugated ibuprofen could be easily cleaved and the cleavage step gives little effect on the biodegradation of ibuprofen. Due to extremely high concentrations of ibuprofen and acetaminophen in influent of municipal WWTP, their concentration levels in effluent likely high enough to pose adverse effects on some aquatic organisms. To protect water environment, advanced treatment is necessary to further remove residue ibuprofen and acetaminophen in the effluent. To the best of our knowledge, this is the systematical summarization on the occurrence and fate of ibuprofen and acetaminophen in municipal WWTP as well as their potential effect on aquatic organisms, which addressed known knowledge and unknowns to be further investigated.

Microplastics (MPs) (plastic particles <5 mm) are globally acknowledged as a serious emerging micropollutant, which passes through various pathways in natural habitats and eventually ends up in our food chain. In this context, the present study critically reviews recent advances in MPs sampling and detection, occurrence, fate, and removal in wastewater treatment plants (WWTPs) by delineating their characteristics that manifest toxicity in the environment via effluent discharge. While there is currently no standard protocol in place, this work examined and compared the latest approaches adopted for improved sampling, sample processing, and characterization of MPs via fluorescence imaging and certified reference materials for method validation. MPs concentration from different sources in the WWTPs varies considerably ranging between 0.28 and 18285 MPs/L (raw wastewater), 0.004-750 MPs/L (effluent), and 0.00023-10380 MPs/kg (sludge). Assessment of MPs removal efficiency across different treatment stages in various in WWTPs has been performed and elucidated their removal mechanisms. The overall MPs removal efficiency in primary, secondary, and tertiary treatment stages in WWTPs reported to be around 57-99%, 78.1-99.4%, and 90-99.2%, respectively. Moreover, the review covers advanced treatment methods for removing MPs, including membrane bioreactors, coagulation/flocculation, ultrafiltration, rapid sand filtration, ozonation, disc filtration, and reverse osmosis, which have been found to be highly effective (>99%). Membrane bioreactors have been proclaimed to be the most reliable secondary treatment technique for MPs removal. Coagulation (92.2-95.7%) followed by ozonation (99.2%) as a tertiary treatment chain has been demonstrated to be the most efficient in removing MPs from secondary-treated wastewater effluent. Further, the review delineates the effect of different treatment stages on the physical and chemical characteristics of MPs, associated toxicity, and potential impact factors that can influence the MPs removal efficiency in WWTPs. Conclusively, the merits and demerits of advanced treatment techniques to mitigate MPs pollution from the wastewater system, research gaps, and future perspectives have been highlighted.

Massive prevalence of microplastics (MPs) in the environment has become one of the world\'s most serious environmental concerns. Human dependence on plastics has created a constant flow of MPs from different sources into natural environment, which has raised public concern regarding consequences of MPs coming into contact with the natural environment. Deploying constructed wetlands (CWs) to reduce MPs pollution is considered a promising method, however there are still barriers for breakthroughs in this technology, particularly knowledge gaps in the mechanisms affect removal process. Recognising this, we provide a comprehensive summary of current advances and theories regarding the mechanisms of occurrence in this research area. In this work, the bibliometric methods were first used to identify annual publication trends and topical topics of research interest. The selected documents were then statistically analyzed using VOSviewer and the \'bibliometrix\' package in R to derive the annual productivity of countries or organizations, the most relevant affiliations, the most relevant authors, the most relevant sources, textual analysis, co-occurrence analysis, and cluster analysis of keywords. Finally, detailed information concerning the removal of MPs by CWs was summarised, covering the most common operational and design parameters (i.e., structure types, wetland plants, substrate materials, and microbial communities), to reveal how these parameters can be adjusted for more efficient MPs removal rate. Challenges and future directions were additionally proposed. It is hoped that the review will help identify current research trends, provide insight into the mechanisms of the removal process, and contribute further to the development of this important area.

This study consists of a review on the removal efficiencies of a wide spectrum of micropollutants (MPs) in biological treatment (mainly membrane bioreactor) coupled with activated carbon (AC) (AC added in the bioreactor or followed by an AC unit, acting as a post treatment). It focuses on how the presence of AC may promote the removal of MPs and the effects of dissolved organic matter (DOM) in wastewater. Removal data collected of MPs are analysed versus AC dose if powdered AC is added in the bioreactor, and as a function of the empty bed contact time in the case of a granular activated carbon (GAC) column acting as a post treatment. Moreover, the enhancement in macropollutant (organic matter, nitrogen and phosphorus compounds) removal is analysed as well as the AC mitigation effect towards membrane fouling and, finally, how sludge properties may change in the presence of AC. To sum up, it was found that AC improves the removal of most MPs, favouring their sorption on the AC surface, promoted by the presence of different functional groups and then enhancing their degradation processes. DOM is a strong competitor in sorption on the AC surface, but it may promote the transformation of GAC in a biologically activated carbon thus enhancing all the degradation processes. Finally, AC in the bioreactor increases sludge floc strength and improves its settling characteristics and sorption potential.

The co-existence of heavy metals in industrial effluents is a prevalent problem. Heavy metals are not biodegradable and can remain in the environment when left untreated. Therefore, metals must be removed from wastewater to protect people\'s health and the environment. Also, these pollutants usually have dissimilar compositions and properties. Generally, metal treatment is performed using traditional methods, but new processes have been developed due to the disadvantages of traditional methods. Especially in the last 20 years, studies on polymer inclusion membranes have been carried out and the transport performance of metal ions has been investigated. It is a more convenient process than both ion exchange and liquid-liquid extraction methods due to the potential and performance of polymer inclusion membranes. When the studies in the literature are examined, it is seen that the performance of polymer inclusion membranes is higher than expected and also when the production conditions are examined, polymer inclusion membrane is more advantageous than other processes. This review is a summary of the studies on the removal and transport of metal by using polymer inclusion membranes in the literature over the last 20 years.

To comprehensively investigate the application of membrane separation technology in the treatment of landfill leachate in China, the performance of nearly 200 waste management enterprises of different sizes in China were analyzed, with an emphasis on their scale, regional features, processes, and economic characteristics. It was found that membrane separation technologies, mainly nanofiltration (NF), reverse osmosis (RO), and NF + RO, have been used in China since 2004. The treatment capacity of the two most dominant membrane separation technologies, i.e., NF and RO, were both almost 60,000 m3/d in 2018, and both technologies are widely used in landfills and incineration plants. Their distribution is mainly concentrated in eastern and southwestern China, where the amount of municipal solid waste (MSW) is relatively high and the economy is developing rapidly. Membrane separation technology is the preferred technique for the advanced treatment of leachate because more contaminants can be effectively removed by the technology than by other advanced processes. However, the membrane retentate that is produced using this technology-commonly known as leachate concentrate-is heavily contaminated due to the enrichment of almost all the inorganic anions, heavy metals, and organic matter that remain after bioprocessing. An economic cost analysis revealed that the operating cost of membrane separation technology has stabilized and is between 1.77 USD/m3 and 4.90 USD/m3; electricity consumption is the most expensive cost component. This review describes the current problems with the use of membrane separation technology and recommends strategies and solutions for its future use.