In this study, we developed a new fluorescence \"on-off-on\" sensor utilizing water-soluble cobalt/zinc-nitrogen co-doped graphene quantum dots (Co/Zn-N-GQDs) to recognize quinalphos pesticide in vegetable and fruit samples. Primarily, the synthesis method employed a one-pot hydrothermal approach, using betel leaves as a natural precursor and cobalt (\"Co\"), zinc (\"Zn\"), and urea (\"N\") as dopant sources. The Co/Zn-N-GQDs probes underwent comprehensive analytical characterization. The Co/Zn-N-GQDs were synthesized with a remarkable luminescence yield of 31.49%, exhibiting excitation at 320 nm and emission peak at 393 nm. Interestingly, the luminescence of Co/Zn-N-GQDs was selectively \"Turned Off\" by Cu2+ via a static quenching setup. Remarkably, quenched fluorescence was surprisingly reactivated upon adding quinalphos to the quench setup, indicating a direct correlation between luminescence reactivation and quinalphos concentration. Briefly, this phenomenon is ascribed to the functional groups in quinalphos, such as quinoxalinyl and phosphorothioate, which chelate with Cu2+ ions, disrupting the nonfluorescent Cu2+-Co/Zn-N-GQDs complex. The design sensor demonstrated a limit of detection (LOD) of 0.11 μM and a broad linear span of 0.5 to 200 μM. In conclusion, Cu2+-Co/Zn-N-GQDs sensor showed immediate applicability, stability, and reproducibility, making it highly effective for quinalphos sensing in various samples.

As anthropogenic disturbance on deep-sea seamount ecosystems grows, there is an urgent need for a better understanding of the biodiversity and community structure in benthic ecosystems, which can vary at local and regional scales. A survey of the benthic megafauna on two adjacent deep-water seamounts in the northwestern Pacific Ocean was conducted, which are covered by cobalt-rich crusts, to assess the biodiversity patterns and dissimilarity of assemblage composition. Based on a multidisciplinary dataset generated from video recordings, multibeam bathymetry data, and near-bottom currents, environmental and spatial factors impacting the megabenthic communities were explored. Results showed that these two deep-water seamounts were dominated by hexactinellids, crinoids, and octocorals. The seamounts were able to support diverse and moderately abundant megafauna, with a total of 6436 individuals classified into 94 morphospecies. The survey covered a distance of 52.2 km across a depth range of 1421-3335 m, revealing multiple distinct megabenthic assemblages. The megabenthic communities of the two deep-water seamounts, with comparable environmental conditions, exhibited similarities in overall density, richness, and faunal lists, while dissimilarities in the relative abundance of taxa and assemblage composition. No gradual depth-related change in terms of abundance, richness, or species turnover was observed across the two seamounts, despite the statistical significance of depth in structuring the overall communities. The spatial distribution of megabenthic communities displayed a discontinuous and patchy pattern throughout the two deep-water seamounts. This patchiness was driven by the interactive effects of multiple environmental factors. Near-bottom currents and microhabitat features were the primary drivers influencing their dissimilarities in megabenthic community structure. This case study on the megabenthic community structure of two adjacent seamounts with cobalt-rich crusts can serve as an environmental baseline, providing a reference status for the conservation and management of seamount ecosystems, particularly valuable for areas being considered for deep-sea mining.

Nickel and cobalt are frequently found in metallic alloys used in the manufacture of aneurysm clips and endovascular prostheses, such as the pipeline embolization device (PED). Nickel hypersensitivity can affect up to 15% of the population, however, it is very rarely overt in patients who undergo endovascular stent placement. Here, we present the case of a 35-year-old woman who developed allergic symptoms after PED placement and was later confirmed to be allergic to both nickel and cobalt by patch testing. Fortunately, she responded well to pharmacologic treatment, rendering surgical intervention unnecessary. To the best of our knowledge, this is the first report of symptomatic nickel hypersensitivity, and the second report of symptomatic cobalt allergy caused by the PED. Despite its low prevalence, we believe that surgeons should actively inquire patients in the postoperative period about allergic symptoms, to facilitate early diagnosis and treatment.

Metal pollution can cause a decline in female fertility, however, previous studies have focused more on the effect of a single metal on fertility. In this study, we evaluated the effect of metal mixtures on female fertility based on nested case-control samples. The plasma levels of 22 metal elements from 180 women were determined by an inductively coupled plasma mass spectrometer (ICP-MS). Minimum absolute contraction and selection operator (LASSO) penalty regression selected metals with the greatest influence on clinical outcome. Logistic regression was used to analyze the correlation between single metals and fertility while a Bayesian kernel function regression (BKMR) model was used to analyze the effect of mixed metals. Eight metals (Calcium (Ca), Chromium (Cr), Cobalt (Co), Copper (Cu), Zinc (Zn), Rubidium (Rb), Strontium (Sr) and Zirconium (Zr)) were selected by LASSO regression for subsequent analysis. After adjusting for covariates, the logistic model showed that Cu (Odds Ratio(OR):0.33, 95% CI: 0.13 - 0.84) and Co (OR:0.38, 95% CI: 0.15 -0.94) caused a significant reduction in fertility, and identified the protective effect of Zn (OR: 2.96, 95% CI:1.21 -7.50) on fertility. Trend tests showed that increased Cr, Cu, and Rb levels were associated with reduced fertility. The BKMR model showed that Cr, Co, Cu, and Rb had a nonlinear relationship with fertility decline when controlling for the concentrations of other metals and suggested that Cu and Cr might exert an influence on fertility. Analysis showed a negative correlation between Cu, Cr, Co, Rb, and fertility, and a positive correlation between Zn and fertility. Furthermore, we found evidence for the interaction between Cu and Cr. Our findings require further validation and may identify new mechanisms in the future.

OBJECTIVE: Cobalt metallosis is a rare but dangerous complication of total joint arthroplasty resulting from deterioration of the joint leading to metal-on-metal friction and breakdown. Potential manifestations vary in severity and include dilated cardiomyopathy, thyroid dysfunction, cognitive disturbances, neuropathy, fatigue, and weakness. The therapeutic role of N-acetylcysteine in metallosis has been investigated due to its ability to chelate with heavy metal ions, such as cobalt and chromium.
CONCLUSIONS: Here we report the case of a 71-year-old female who presented with suspected metallosis diagnosed in the outpatient setting due to symptoms of significant weight loss and failure to thrive. This metallosis was secondary to the hardware breakdown of a left knee revision roughly 6 years previously. The patient was not a surgical candidate due to her poor nutrition status and was started on nasojejunal tube feeds along with N-acetylcysteine 600 mg by mouth twice daily for 45 days. The patient\'s serum cobalt levels decreased from 61.7 µg/L on admission to 16.2 µg/L prior to her undergoing proper revision of the left knee roughly 2 months after admission to the hospital. The patient tolerated treatment well and was able to be discharged the day after surgery, with no further complaints or complications.
CONCLUSIONS: This case report contributes to the body of literature suggesting that administration of N-acetylcysteine can reduce serum cobalt concentrations, without notable adverse effects, in the context of prosthetic knee-associated metallosis.

METHODS: There is an increasing emphasis on adverse reactions to metal debris around prosthetic hip implants. We present a case report of a patient with increasing pain around a previous total hip arthroplasty and magnetic resonance imaging findings consistent with a pseudotumor. Serum metal ion levels were not elevated and initial biopsy findings inconclusive. The patient was diagnosed with an extraskeletal chondrosarcoma after revision total hip arthroplasty and subsequently underwent external hemipelvectomy with negative margins.
CONCLUSIONS: This report highlights the importance of remaining vigilant for malignant sarcomas presenting as pseudotumors around hip replacements, particularly in the absence of abnormal metal ion levels or definitive biopsy results.

In this article, the recently published SPOTTER approach, which allows for identifying potential supply disruption impacts along the entire supply chain within life cycle sustainability assessment in the short term (i.e., < 5 years), is applied to a case study addressing the cobalt and aluminum supply chains of electric vehicles (EVs) used in Switzerland. Existing studies within the field assessing supply disruption impacts for EVs and other technologies focus on impacts related to raw material supply and thus neglect impacts along full supply chains. The present study identifies hotspots and overall impacts along the full supply chains by analyzing six supply disruption events (i.e., geopolitical instability, child labor restrictions, trade barriers, price volatility, limited recyclability, and economic resource depletion) for two impact categories (i.e., cost variability and limited availability). Identified hotspots suggest that supply chains are potentially disrupted mainly through events occurring in Asian, African, or other developing countries and affecting the Western economies. The highest risks are indicated in relation to the supply of EVs, EV wiring, traction batteries, cobalt powder, and cobalt ore. Suitable measures to mitigate these supply risks are suggested showing that some of the suggestions could not have been made based on the results of existing studies.

暂无摘要。

UNASSIGNED: Little is known about the relationship between implant material and periprosthetic bone mineral density (pBMD) in total knee arthroplasty (TKA). The purpose of this study was to investigate the change in pBMD after TKA and to compare pBMD changes between two different implant materials.
UNASSIGNED: A prospective matched-pair case-control study was conducted on 29 patients who underwent bilateral TKAs. The participants were randomly allocated to undergo cemented TKAs with a titanium nitride (TiN)-coated implant on one knee (TiN group) and a cobalt-chromium (CoCr) implant on the other knee (CoCr group). The pBMD was measured using dual-energy X-ray absorptiometry scans before surgery and at 1 and 2 years after surgery. The results were then compared between the two groups. The pBMDs at longer follow-ups (> 2 years) were estimated using simple radiographs (pBMDe).
UNASSIGNED: At 2 years after surgery, the pBMD significantly decreased in both groups at medial metaphysis of the tibia and anterior portion of the distal femur (all p < 0.001). The CoCr group showed a larger decrease in pBMD than did the TiN group in the medial and anterior metaphysis of the proximal tibia (p = 0.003 and p = 0.046, respectively). The pBMDe was significantly higher in the TiN group at the anterior portion of the distal femur 7 years after surgery (p = 0.019).
UNASSIGNED: The pBMD significantly decreased 2 years after TKA in certain regions regardless of the implant material used. However, the decrease was significantly less in the TiN group in specific regions of the tibia and femur. The TiN implant was beneficial in preserving the periprosthetic bone stock after TKA.

BACKGROUND: Hard metal lung disease (HMLD) is a relatively less known occupational interstitial lung disease, and instances of HMLD resulting from para-occupational exposure are rarely reported.
METHODS: This paper presents two cases of interstitial lung disease caused by exposure to hard metal. The first case involves a 37-year-old Taiwanese man who had worked at a grinder station for hard metal materials for 12 years without respiratory protective equipment. He experienced a dry cough and exertional dyspnea, and his chest imaging and pathology findings were consistent with the features of usual interstitial pneumonia. Analysis of his lung tissue revealed the presence of tungsten and cobalt. The second case involves a 68-year-old Taiwanese woman, the mother of the first patient, who had hand-washed her son\'s workwear. She experienced a dry cough and had similar imaging findings to her son. After her son left his job, they both exhibited improved symptoms and lung functions with nintedanib treatment. These findings suggest a diagnosis of HMLD and interstitial lung disease resulting from para-occupational exposure to hard metal dust.
CONCLUSIONS: The diagnosis of HMLD relies on obtaining a detailed occupational exposure history. If HMLD is diagnosed, discontinuing exposing to hard metal dusts can lead to improved lung function.