BACKGROUND: This study aimed to evaluate the effectiveness and safety of 2D laparoscopy vs 3D laparoscopy for the treatment of colorectal cancer.
METHODS: A literature search was conducted through PubMed, Web of Science, and Embase from their inception to January 2024. Studies investigating different outcomes of colorectal surgery were included. Results are presented as odds ratios (ORs) or mean differences (MDs) with 95% confidence intervals (CIs). The protocol for this review has been registered on PROSPERO (CRD42024504902).
RESULTS: A total of 10 publications were retrieved in this article. The 3D group is associated with a significant improvement in intraoperative blood loss (MD = -8.04, 95% CI = -14.18 to -1.89, P = 0.01, I2 = 55%), operative time (MD = -17.33, 95% CI = -29.15 to -5.51, P = 0.004, I2 = 90%), and postoperative hospital stay (MD = -0.23, 95% CI = -0.43 to -0.04, P = 0.02, I2 = 48%) compared to that of patients treated in the 2D group, particularly for rectal cancer patients above three results (MD = -10.36, 95% CI = -15.00 to -5.73, P < 0.001, I2 = 0%), (MD = -18.85, 95% CI = -34.88 to -2.82, P = 0.02, I2 = 57%), and (MD = -0.93, 95% CI = -1.53 to -0.34, P = 0.002, I2 = 0%), respectively. There was no significant statistical difference in the time of pass flatus (MD = -0.14, 95% CI = -0.49 to  0.21, P = 0.44, I2 = 79%) and the number of dissected lymph nodes (MD = 0.36, 95% CI = -0.49 to 1.21, P = 0.41, I2 = 45%), but the 3D group had an earlier postoperative pass flatus for rectal cancer patients (MD = -0.46, 95% CI = -0.66 to -0.27, P<0.001, I2 = 0%) and the more number of dissected lymph nodes for colon cancer patients (MD = 1.54, 95% CI = 0.05 to 3.03, P = 0.04, I2 = 69%) than the 2D group. There was no significant difference in postoperative overall complication (OR = 0.94, 95% CI = 0.67 to 1.31, P = 0.71, I2 = 0%) and anastomotic leakage (OR = 0.93, 95% CI = 0.48 to 1.80, P = 0.83, I2 = 0%) in the two groups, regardless of rectal cancer and colon surgery patients.
CONCLUSIONS: This meta-analysis demonstrates that 3D laparoscopy could reduce the amount of blood loss, accelerate postoperative pass flatus, and shorten the operation time and postoperative hospital stay over 2D for radical rectal cancer surgery, without obvious advantage for radical colon cancer surgery. Moreover, 3D laparoscopy increases the number of dissected lymph nodes for radical colon cancer surgery but may not be observed in rectal cancer surgery.

BACKGROUND: Advancements in technology have enhanced education, training, and application in health care. However, limitations are present surrounding the accessibility and use of simulation technology (eg, simulators) for health profession education. Improving the accessibility of technology developed in university-based research centers by nonprofit organizations (NPOs; eg, hospitals) has the potential to benefit the health of populations worldwide. One example of such technology is 3D-printed simulators.
OBJECTIVE: This scoping review aims to identify how the use of open-source databases for the distribution of simulator designs used for 3D printing can promote credible solutions for health care training while minimizing the risks of commercialization of designs for profit.
METHODS: This scoping review will follow the Arksey and O\'Malley methodological framework and the Joanna Briggs Institute guidance for scoping reviews. Ovid MEDLINE, CINAHL, Web of Science, and PsycINFO will be searched with an applied time frame of 2012 to 2022. Additionally, gray literature will be searched along with reference list searching. Papers that explore the use of open-source databases in academic settings and the health care sector for the distribution of simulator designs will be included. A 2-step screening process will be administered to titles and abstracts, then full texts, to establish paper eligibility. Screening and data extraction of the papers will be completed by 2 reviewers (MS and SS) for quality assurance. The scoping review will report information on the facilitation of distributing 3D-printed simulator designs through open-source databases.
RESULTS: The results of this review will identify gaps in forming partnerships with NPOs and university-based research centers to share simulator designs. The scoping review will be initiated in December 2024.
CONCLUSIONS: The information collected will be relevant and useful for stakeholders such as health care providers, researchers, and NPOs for the purpose of overcoming the gaps in research regarding the use and distribution of simulation technology. The scoping review has not been conducted yet. Therefore, there are currently no findings to report on.
UNASSIGNED: PRR1-10.2196/53167.

OBJECTIVE: To systematically review the literature for mid-sagittal plane establishment approaches to identify the most effective method for constructing the mid-sagittal plane for the evaluation of facial asymmetry.
METHODS: Six electronic databases (PubMed, Medline (via Ovid), EMBASE (via Ovid), Cochrane Library, Web of Science, and Scopus) and grey literature were searched for the studies that computed the mid-sagittal reference plane three-dimensionally, using a combination of MeSH terms and keywords. The methodological quality and the level of evidence for the included studies were analyzed using QUADAS-2 and GRADE, respectively.
RESULTS: The preliminary search yielded 6746 records, of which 42 articles that met the predefined inclusion criteria were included in the final analysis. All the included articles reported the construction of the mid-sagittal reference plane (MSP) using varied methods. The risk of bias and concerns regarding the applicability of the included studies were judged to be \'low\'. The level of evidence was determined to be \'low\' for the effectiveness of the technique and \'moderate\' for the ease of clinical applicability.
CONCLUSIONS: Despite methodological heterogeneity, this review substantiates the comparable efficacy of cephalometric and morphometric MSP construction methods. A fully automated morphometric MSP holds promise as a viable option for routine clinical use. Nevertheless, future prospective studies with an emphasis on the impact, accuracy, and clinical applicability of MSP construction techniques in cases of facial asymmetry are required.
CONCLUSIONS: The present review will assist clinicians in selecting the most suitable method for MSP construction, leading to improved treatment planning and ultimately more favorable treatment outcomes.

Computer-assisted orthopedic surgery requires precise representations of bone surfaces. To date, computed tomography constitutes the gold standard, but comes with a number of limitations, including costs, radiation and availability. Ultrasound has potential to become an alternative to computed tomography, yet suffers from low image quality and limited field-of-view. These shortcomings may be addressed by a fully automatic segmentation and model-based completion of 3D bone surfaces from ultrasound images. This survey summarizes the state-of-the-art in this field by introducing employed algorithms, and determining challenges and trends. For segmentation, a clear trend toward machine learning-based algorithms can be observed. For 3D bone model completion however, none of the published methods involve machine learning. Furthermore, data sets and metrics are identified as weak spots in current research, preventing development and evaluation of models that generalize well.

OBJECTIVE: This study was aimed at comparing the mechanical parameters of ceramics made using the addition and subtraction technique.
METHODS: A search was performed on four search engines on 5th April 2023. Quality assessment was performed using study type-specific scales. Where possible, a meta-analysis was performed.
METHODS: Data were extracted from four search engines: PubMed, PubMed Central, Embase, Web of Science, Scopus.
METHODS: The search strategy identified 686 potential articles. 19 papers were subject to qualitative analysis, and data from 11 papers were meta-analysed. The included studies were of high or medium quality. All included papers were in-vitro studies. No clinical trials were found in the literature.
CONCLUSIONS: Ceramics made in the additive technology in terms of mechanical parameters can compete with ceramics made in the milling technology. There are no clinical studies yet that would indicate the use of this type of material for permanent restorations in patients. Studies presented in the literature vary greatly in terms of study design and reporting of results. The research did not receive external funding.

There is an unmet biomedical need for ex vivo tumour models that would predict drug responses and in turn help determine treatment regimens and potentially predict resistance before clinical studies. Research has shown that three dimensional models of ovarian cancer (OvCa) are more realistic than two dimensional in vitro systems as they are able to capture patient in vivo conditions in more accurate manner. The vast majority of studies aiming to recapitulate the ovarian tumour morphology, behaviors, and study chemotherapy responses have been using ovarian cancer cell lines. However, despite the advantages of utilising cancer cell lines to set up a platform, they are not as informative as systems applying patient derived cells, as cell lines are not able to recapitulate differences between each individual patient characteristics. In this review we discussed the most recent advances in the creation of 3D ovarian cancer models that have used patient derived material, the challenges to overcome and future applications.

UNASSIGNED: The crux in high-grade glioma surgery remains maximizing resection without affecting eloquent brain areas. Toward this, a myriad of adjunct tools and techniques has been employed to enhance surgical safety and efficacy. Despite intraoperative MRI and advanced neuronavigational techniques, as well as augmented reality, to date, the only true real-time visualization tool remains the ultrasound (US). Neuroultrasonography is a cost-efficient imaging modality that offers instant, real-time information about the changing anatomical landscape intraoperatively. Recent advances in technology now allow for the integration of intraoperative US with neuronavigation.
UNASSIGNED: In this report, we present the resection technique for three cases of high-grade gliomas (two glioblastomas and one anaplastic astrocytoma). The patient presented with a variable clinical spectrum. All three cases have been performed using the Brainlab® neuronavigation system (BrainLAB, Munich, Germany) and the bk5000 US Machine® (BK Medical, Analogic Corporation, Peabody, Massachusetts, USA).
UNASSIGNED: Gross total resection was achieved in all three cases. The use of 3D navigated US was a reliable adjunct surgical tool in achieving favorable resection outcomes in these patients.

Over the last decade, technological growth has developed new devices for more precise surgery based on improved maneuverability, minimally invasive approaches, and magnification of the operating field. In this context, the exoscope has opened a new phase for more accurate and safer microsurgery, improving the perception of the volume of objects and the depth of structures for planning, targeting, and controlling fine movements. The exoscope could be used for middle ear, transcanal, transmastoid, and craniotomy procedures that require two-handed dissection, both to perform both totally VITOM-based techniques and coupled to traditional procedures with an operating microscope or endoscope. In addition, the VITOM 3D system allows the surgeon to work with high-definition images, which is essential in facial nerve surgery or submandibular salivary stone or tear surgery approaches, where magnification plays a fundamental role in surgical success and in reducing operating times. The 3D exoscope approach could also be included in traditional transoral procedures for oropharyngeal carcinoma. The exoscope may provide a relevant approach in teaching surgeons and nurses, allowing adequate training in non-oncological surgical procedures such as a tonsillectomy or lateral pharyngoplasty.

Supercapacitors have the characteristics of high power density and long cycle life, but the low energy density limits their further development. The 2D transitional metal carbides/nitrides (MXenes) show great application prospects in the field of supercapacitors due to their superior volumetric capacitance, metallic-like conductivity, tunable surface terminations, and structural advantages. However, like other 2D materials, MXenes suffer from the inevitable problem of nanosheet restacking and aggregation, which reduces the overall active surface sites and blocks the accessibility of the electrolyte ions. The transformation of 2D MXene nanosheets into 3D architectures is proven effective to overcome the restacking problem. The review briefly summarizes the preparation strategies of 3D MXene materials, including template-assisted method, framework-assisted method, chemical assembly method, foaming method, and other methods with the discussion centered on the performances of 3D MXenes in supercapacitors. Finally, an outlook on the current progress and opportunities is given to highlight the increasing popularity of 3D MXenes in supercapacitors.

Edge-to-edge transcatheter mitral valve repair (TMVr) using MitraClip has been evolving rapidly in patients with severe mitral regurgitation (MR) at high surgical risk or having contraindications for surgery. Three-dimensional (3D) echocardiography plays an important role in the management of severe MR. In particular, 3D transesophageal echocardiography (TEE) imaging allows the evaluation of MV geometry and quantification of MR severity with dedicated software. Real-time 3D TEE is also commonly used to guide TMVr and facilitate the procedure. Further development of 3D echocardiography may help achieve safer and more beneficial results. The following article summarizes the current knowledge and the future perspectives of 3D TEE in TMVr.