BACKGROUND: Posttreatment changes after orthodontic treatment are challenging. One of the main reasons for such a phenomenon is the lack of patient compliance with removable retainers especially in the maxillary arch, due to palatal coverage, deterioration of speech, decreased masticatory efficiency, and loss of retainers. Fixed retainers have been introduced to overcome patient compliance and provide longer stable results. However, teeth still show movements when a six-unit fixed retainer is in place. Thus, in this study, an eight-unit fixed retainer was evaluated in an attempt to eliminate unwanted movements. THE AIM OF THIS RESEARCH: was to assess short-term positional changes associated with an eight-unit extended maxillary fixed retainer.
METHODS: A single-arm clinical trial was conducted to address the aim of the study. This research was approved by the institutional review board of the Faculty of Dentistry, Alexandria University (IORG:0008839, No-0479-8/2022). The registration date of this study was 5/06/2023. Twenty-eight patients (19.8 ± 4.5 years) who had finished the active orthodontic phase and started retention had an eight-unit extended maxillary fixed retainer that was bonded to the palatal surface of the maxillary incisors, canines, and the first premolars or the second premolars. Pre-retention and one-year post-retention intra-oral scans were made to produce STL files that were superimposed to determine the amount of tooth change. Additionally, analysis of digital casts and lateral cephalometric radiographs was performed.
RESULTS: Statistically significant changes in all planes and the rotation of teeth after one year of retention were found. The upper right lateral incisor exhibited the most evident change in the vertical plane, while the upper right central incisor exhibited the greatest change overall. Minimal changes in the cast measurements were observed. Lateral cephalometric measurements showed minimal changes after one year of retention, and these changes were not statistically significant except in the interincisal angle and the angle between the upper incisor and the line connecting the A-point to the pogonion.
CONCLUSIONS: Increasing the extension of maxillary fixed retainers did not eliminate unwanted tooth movement in the first year of retention.

BACKGROUND: Temporal bone dissection is overwide recognized as an ideal training method for otologic surgeons. The knowledge of temporal bone anatomy and especially of the course of infratemporal facial nerve is pivotal in practice. The 3D exoscope is an innovative and promising tool, that was recently introduced in ear surgery.
METHODS: A high-definition 3D exoscope (3D VITOM®) mounted on the VERSACRANETM holding system (Karl Storz) was used to perform two temporal bone dissection, with the aim to study the anatomy of infratemporal facial nerve. The 3D endoscope (TIPCAM®1 S 3D ORL, Karl Storz) was used in combination to provide a close-up high-quality view and to provide a different angle of view on fine anatomical relationships.
RESULTS: The high-definition 3D exoscope allowed to conduct the dissection with high quality visualization and to share the same surgical field with trainees. Moreover, it showed a high interchangeability with the 3D endoscope.
CONCLUSIONS: 3D 4 K Exo-endoscopic temporal bone dissection seems to have benefits in terms of educational purpose, especially concerning anatomy understanding. The superiority in teaching value of this tool should be further investigated in cohort studies.

UNASSIGNED: Right ventricle-pulmonary arterial (RV-PA) coupling is considered the gold standard for assessing right ventricular (RV) function and can be evaluated noninvasively by echocardiography. The ratios of tricuspid annular plane systolic excursion/pulmonary artery systolic pressure (TAPSE/PASP), RV global longitudinal strain (G-RVLS)/PASP, and stroke volume/end-systolic volume (SV/ESV) have been proposed as surrogates of RV-PA coupling. The relationship of these parameters remains incompletely understood in patients with volume and pressure loading conditions. We aimed to compare these parameters and evaluate their relationship with 3D RV data in patients with RV pressure and volume overload.
UNASSIGNED: This study was performed on 110 individuals who underwent 2D and 3D echocardiography. Fifty-four patients had RV volume overload (atrial septal defect (ASD) group), 34 patients had RV pressure overload (pulmonary hypertension (PH) group), and 22 were controls. TAPSE/PASP, G-RVLS/PASP and SV/ESV ratios were calculated. Correlations between parameters of RV-PA coupling and 3D data were assessed using general linear mixed models.
UNASSIGNED: Compared with the ASD group, the PH group had lower TAPSE/PASP and G-RVLS/PASP ratios. The SV/ESV ratio had a strong correlation with right ventricle ejection fraction (RVEF) in both ASD and PH patients (r = 0.8703, p < 0.001 and r = 0.9388, p < 0.001, respectively). The G-RVLS/PASP ratio showed a strong or moderately negative relationship with end-diastolic volume (EDV), ESV and SV (r = -0.7768, p = 0.001; r = -0.7327, p = 0.0005 and r = -0.6816, p = 0.0018, respectively) in PH patients. The TAPSE/PASP ratio showed moderately negative correlations with EDV and ESV (r = -0.5712, p = 0.0012 and r = -0.5594, p = 0.0016, respectively) in PH patients.
UNASSIGNED: Non-invasive RV-PA coupling parameters derived from echocardiography appear similar, but not identical to profiles in pressure-overloaded and volume-overloaded patients. The correlations between non-invasive RV-PA coupling parameters and 3D data displayed various degrees of correlation.

Purpose: To evaluate, in vitro, the efficiency of a novel apparatus to test the adherence and penetration of bacteria on different membranes for guided regeneration. Methodology: To create the 3D device, Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) systems were used. Three types of biomaterials were tested (n = 6): (DT) a collagen membrane; (DS) a polymer membrane; and (LP) a dense polytetrafluoroethylene barrier. The biomaterials were adapted to the apparatuses and challenged with two different monospecies bacterial culture of A. actinomycetemcomitans b and S. mutans. After 2 h, bacterial adherence and penetration were quantified by counting the number of colony-forming units (CFUs). Two specimens from each group were used for image analysis using Confocal Laser Scanning Microscopy. Statistical analysis was performed. Findings: The DS group had a higher adherence of S. mutans compared to A. actinomycetemcomitans b (p = 0.05). There was less adherence of A. actinomycetemcomitans b in the DS group, compared to the LP (p = 0.011) and DT (p < 0.001) groups. Only the membranes allowed penetration, which was blocked by barriers. The DT group allowed a greater penetration of S. mutans to occur compared to A. actinomycetemcomitans b (p = 0.009), which showed a higher penetration into the DS membranes compared to S. mutans (p = 0.016). The penetration of A. actinomycetemcomitans b through DS was higher compared to its penetration through DT and LP (p < 0.01 for both). DT and DS allowed a greater penetration of S. mutans to occur compared to LP, which prevented both bacterial species from penetrating. Conclusion: The apparatus allowed for the settlement and complete sealing of the biomaterials, enabling standardization.

Electrical stimulation (ES) of cellular systems can be utilized for biotechnological applications and electroceuticals (bioelectric medicine). Neural cell stimulation especially has a long history in neuroscience research and is increasingly applied for clinical therapies. Application of ES via conventional electrodes requires external connectors and power sources, hindering scientific and therapeutic applications. Here engineering novel 3D scaffold-free human neural stem cell constructs with integrated piezoelectric nanoparticles for enhanced neural tissue induction and function is described. Tetragonal barium titanate (BaTi03) nanoparticles are employed as piezoelectric stimulators prepared as cytocompatible dispersions, incorporated into 3D self-organizing neural spheroids, and activated wirelessly by ultrasound. Ultrasound delivery (low frequency; 40 kHz) is optimized for cell survival, and nanoparticle activation enabled ES throughout the spheroids during differentiation, tissue formation, and maturation. The resultant human neural tissues represent the first example of direct tissue loading with piezoelectric particles for ensuing 3D ultrasound-mediated piezoelectric enhancement of human neuronal induction from stem cells, including augmented neuritogenesis and synaptogenesis. It is anticipated that the platform described will facilitate advanced tissue engineering and in vitro modeling of human neural (and potentially non-neural) tissues, with modeling including tissue development and pathology, and applicable to preclinical testing and prototyping of both electroceuticals and pharmaceuticals.

Hypoxia in the tumor core negatively affects the outcome of patients with head and neck squamous cell carcinoma (HNSCC). Nevertheless, its role in predicting treatment response requires further exploration. Typically, reduced oxygen levels in the tumor core correlate with diminished efficacy of radiotherapy, chemotherapy, and immunotherapy, which are commonly used for HNSCC patients\' treatment. Understanding the mechanistic underpinnings of these varied treatment responses in HNSCC is crucial for enhancing therapeutic outcomes and extending patients\' overall survival (OS) rates. Standard monolayer cell culture conditions have major limitations in mimicking tumor physiological features and the complexity of the tumor microenvironment. Three-dimensional (3D) cell cultures enable the recreation of the in vivo tumor attributes, encompassing oxygen and nutrient gradients, cellular morphology, and intracellular connections. It is vital to use the 3D model in treatment response studies to mimic the tumor microenvironment, as evidenced by the decreased sensitivity of 3D structures to anticancer therapy. Accordingly, the aim of the study was to delineate the utility of the 3D models of hypoxic head and neck tumors in drug screening and treatment response studies.

UNASSIGNED: The study aims to identify differences in tibiofemoral joint morphology between responders (R group, no pain) to arthroscopic partial medial meniscectomy (APMM) versus medial postmeniscectomy syndrome patients (MPMS group, recurrent pain at 2 years postmeniscectomy) in a clinically neutrally aligned patient population. The second aim was to build a morphology-based predictive algorithm for response to treatment (RTT) in APMM.
UNASSIGNED: Two patient groups were identified from a large multicentre database of meniscectomy patients at 2 years of follow-up: the R group included 120 patients with a KOOS pain score > 75, and the MPMS group included 120 patients with a KOOS pain score ≤ 75. Statistical shape models (SSMs) of distal femur, proximal tibia and tibiofemoral joint were used to compare knee morphology. Finally, a predictive model was developed to predict RTT, with the SSM-derived morphologic variables as predictors.
UNASSIGNED: No differences were found between the R and MPMS groups for patient age, sex, height, weight or cartilage status. Knees in the MPMS group were significantly smaller, had a wider femoral notch and a smaller medial femoral condyle. A morphology-based predictive model was able to predict MPMS at 2 years follow-up with a sensitivity of 74.9% (95% confidence interval [CI]: 74.4%-75.4%) and a specificity of 81.0% (95% CI: 80.6%-81.5%).
UNASSIGNED: A smaller tibiofemoral joint, a wider intercondylar notch and smaller medial femoral condyle were observed shape variations related to medial postmeniscectomy syndrome. These promising results are a first step towards a knee morphology-based clinical decision support tool for meniscus treatment.
UNASSIGNED: Case-control study.
UNASSIGNED: Level IIIb.

The black rat (Rattus rattus) is a unique model for studying exploratory tactics due to its enormous colonizing potential. Considerable behavioral variability and consistent interindividual differences might help populations inhabit new environments and persist there even under intense pressure. Additionally, the affinity of the black rat for climbing might be another advantage, widening their potential niche. In this study, we describe the exploratory tactics of the black rats when introduced to a novel environment. In the first experiment, we tested 12 rats and calculated repeatability of their behaviors across 12 sessions of an enriched open-field test. We concluded that climbing is a highly repeatable behavior that serves as an important source of interindividual variability. In the second experiment, we tested 24 black rats in a unique L-shaped arena. Each rat was tested twice. We found that the majority of rats distributed their activity evenly, exploring each part of the apparatus for a similar amount of time, thus maximizing their chances of finding resources. Nevertheless, these \"even\" explorers still greatly differed in their level of activity, orderliness and affinity for climbing, generating large variability. In contrast, the minority of rats concentrated their activity only on a section of the new environment and were therefore characterized as selective explorers. Overall, we concluded that a combination of such exploratory tactics as well as a bias for even explorers enables black rats to quickly colonize new environments and persist there even under unfavorable conditions.

OBJECTIVE: The first randomized placebo-controlled therapeutic trial in radiologically isolated syndrome (RIS), ARISE, demonstrated that treatment with dimethyl fumarate (DMF) delayed the onset of a first clinical event related to CNS demyelination and was associated with a significant reduction in new and/or newly enlarging T2-weighted hyperintense lesions. The purpose of this study was to explore the effect of DMF on volumetric measures, including whole brain, thalamic, and subcortical gray matter volumes, brainstem and upper cervical spine three-dimensional (3D) volumes, and brainstem and upper cervical spine surface characteristics.
METHODS: Standardized 3T MRIs including 3D isotropic T1-weighted gradient echo images were acquired at baseline and end-of-study according to the ARISE study protocol. The acquired data were analyzed using Structural Image Evaluation Using Normalization of Atrophy (SIENA), FreeSurfer v7.3, and an in-house pipeline for 3D conformational metrics. Multivariate mixed models for repeated measures were used to analyze rates of change in whole brain, thalamic, subcortical gray matter, as well as change in the 3D surface curvature of the dorsal pons and dorsal medulla and 3D volume change at the medulla-upper cervical spinal cord.
RESULTS: The study population consisted of 64 RIS subjects (DMF:30, placebo:34). No significant difference was seen in whole brain, thalamic, or subcortical gray matter volumes in treated vs. untreated RIS patients. A significant difference was observed in dorsal pons curvature with the DMF group having a lower least squares mean change of - 4.46 (standard estimate (SE): 3.77) when compared to placebo [6.94 (3.71)] (p = 0.036). In individuals that experienced a first clinical event, a greater reduction in medulla-upper cervical spinal cord volume (p = 0.044) and a decrease in surface curvature was observed at the dorsal medulla (p = 0.009) but not at the dorsal pons (p = 0.443).
CONCLUSIONS: The benefit of disease-modifying therapy in RIS may extend to CNS structures impacted by neurodegeneration that is below the resolution of conventional volumetric measures.

OBJECTIVE: In oral rehabilitation, a full mouth minimal invasive treatment can represent a major challenge for the patient and the dentist. The purpose of this article is to present a new technique to restore eroded teeth and recover the vertical dimension with a simple and predictable technique.
METHODS: Occlusal tabletop restorations are a suitable conservative option to restore anatomy and vertical dimension augmentation but highly sensitive. The cementation of those restorations without stable landmarks, the cement excess removal, the insertion path, or the time needed are some of the difficulties can be faced. Now a days with the new CAD-CAM techniques is possible to develop a new occlusal tabletop manufacturing alternative utilizing 3D-printed technology by unifying the restorations with a customized connector that allows us to print several onlays at same time, as a single object, also being cemented at once.
CONCLUSIONS: This protocol reduces the technique sensitivity of a vertical dimension oral rehabilitation process, reduce the chair time, enhancing the patient-comfort and delivers a unique way to restore dental lost anatomy as a definitive or temporary way with printing materials.
CONCLUSIONS: With the advent of new CAD-CAM 3D printing materials, which are increasingly versatile and gaining favor among clinicians, it is now possible to address complex clinical situations with greater predictability. This technology enables the development of treatment solutions that are both effective and efficient, consequently reducing clinical time for the patient.