This work presents the novel application of green oils to extract arsenic ions from petroleum produced water via liquid-liquid extraction (LLE). In the experiment, the removal of arsenic ions from synthetic petroleum produced water is investigated, using five green oils: canola oil, corn oil, linseed oil, rice bran oil, and sunflower oil, in place of petroleum-based solvents: toluene and kerosene. Both extraction and stripping optimizations are examined. For extractants, Aliquat 336 and Cyanex 921 are implemented. The initial arsenic concentration (3.984 mg L-1) of petroleum produced water is examined. Results demonstrate that Aliquat 336 in corn oil proved to be most effective for arsenic removal. At optimal conditions via response surface methodology (RSM), the highest extraction and stripping percentages reached 99.95 % and 100.00 %, respectively. In accordance with the World Health Organization (WHO) levels of ≤0.01 mg L-1, arsenic concentration remaining in the extracted water (0.002 mg L-1), is seen to fulfill the requirement needed. The extraction and stripping kinetics are of first and second-order. Mechanisms of arsenic removal are evaluated via density functional theory (DFT). Further, selectivity, recycling of the organic phase, and the number of stages via McCabe-Thiele theory are determined under optimal conditions.

Comprehensive data on the occurrence of sterols in plant oils is currently hardly available since only a few sterols are obtainable as standard compounds. Accordingly, many peaks are rarely labeled in gas chromatograms due to missing or outdated information. This lack of information hampers the progress in sterol research. For this reason, gas chromatography with mass spectrometry in selected ion monitoring mode (GC/MS-SIM) was used to create a database that summarizes the occurrence and semi-quantitative levels of 150 sterols with 27-32 carbon atoms and 0-4 double bonds in 66 different vegetable oils and eight other matrices. The highest number of sterols was detected in rice bran and tamanu oil (40 sterols), eggplant (39 sterols), moringa, chili seed, and amaranth oil (37 sterols). Several sterols were detected in >60 of the 74 matrices. This detailed information in the database will serve users working in food authentication and the biosynthesis of sterols.

Omega-3 long-chain polyunsaturated fatty acids (n-3 LC-PUFAs) such as eicosapentaenoic acid (20:5n-3, EPA) and docosahexaenoic acid (22:6n-3, DHA) offer protective benefits against various pathological conditions, including atherosclerosis, obesity, inflammation, and autoimmune diseases. Marine fish and seafood are the primary sources of n-3 LC-PUFAs in the human diet. However, the inclusion of fish oil in aquafeeds is declining due to limited availability, fluctuating prices, sustainability concerns, and replacement with vegetable oils. While comprehensive narrative reviews on the impact of substituting fish oil with vegetable oil in aquafeeds exist, quantitative studies are relatively scarce and mainly focused on comparing the source of vegetable oils. Herein, we employed, for the first time, a Bayesian meta-analysis approach, collecting research data from 81 articles to quantitatively analyze the effects of dietary n-3 LC-PUFA levels on the n-3 LC-PUFA composition and growth performance in cultured fish. Our findings indicate that with the exception of herbivorous fish, dietary n-3 LC-PUFA levels significantly affect the EPA and DHA levels in the livers and muscles of carnivorous, omnivorous, freshwater, and marine fish. Additionally, the growths of freshwater and herbivorous fish were less affected by changes in dietary n-3 LC-PUFA levels compared to that of carnivorous and marine fish.

The effect of diets with various dietary MUFA content and n-6/n-3 ratios, diets 1 (55.33, 1.00), 2 (25.30, 1.00), 3 (55.13, 2.05), 4 (24.92, 2.03), 5 (54.94, 8.06) and 6 (24.91, 8.06) and a control diet with fish oil (FO), diet 7 (33.60, 5.97), was studied on growth and digestive physiology of rainbow trout, Oncorhynchus mykiss. Juveniles, 14.65 g ± 0.17, were fed the experimental diets for eight weeks. Those fish fed diet 1 (55.33, 1.00) had the lowest growth and nutritional indices, while fish fed diet 6 (24.91, 8.06) possessed the highest indices. However, fish fed D7 (33.60, 5.97) was intermediate in this regard. Proximate body composition results revealed no significant differences among various experimental groups (P > 0.05). Fish fed on diet 1 possessed the highest alkaline protease activity, while fish raised on diet 2 showed the lowest enzyme activity (P < 0.05). Fish fed on diets 1, 3 and 4 had the highest lipase activity (P > 0.05). Amylase activity and intestinal parameters did not differ among groups (P > 0.05). MUFA contents of liver and muscle reflected the MUFA contents of the diets; however, liver PUFA contents was not affected by dietary PUFA contents (P < 0.05). However, 18:3n-3 contents of liver decreased as dietary n-6/n-3 ratio increased (P < 0.05). Furthermore, the liver 20:4n-6 contents considerably increased as dietary n-6/n-3 increased to 8.06 (P < 0.05). Muscle 22:6n-3 content of groups 1 to 6 was lower than group 7 (P < 0.05). In conclusion, rainbow trout was considerably capable of de novo synthesis of 22:6n-3. Meanwhile, increasing dietary n-6/n-3 ratio to 8.06 decreased the muscle 22:6n-3 content which requires further considerations regarding fish immune competence and nutritional quality for human consumption.

Ethyl acetate, acetone, 2-propanol, 1-propanol, and ethanol were screened among the class 3 category solvents as an alternative to hexane based on operational and occupational safety and bio-renewability potential. All five solvents exhibited higher extractability (22.3 to 23.2%) than hexane (21.5%) with soybean flour. Additionally, there was no significant difference in the fatty acid and triacylglycerol (TAG) composition of the oils extracted using alternate solvents and hexane, indicating the oil quality was not affected. More importantly, ethyl acetate (2.1%) resulted in a marginally higher yield of TAG, while 2-propanol showed a nearly equal yield to hexane. Further, membrane desolventizing was attempted to mitigate the limitations of higher thermal energy requirements. One of the polydimethylsiloxane membranes exhibited good selectivity (TAG rejection 85.8%) and acceptable flux (59.3 L·m-2·h-1) with an ethyl acetate miscella system. Under plant-simulated recirculation conditions, a two-stage membrane process reduced the oil content in permeate to 2.5%. The study revealed that ethyl acetate could potentially replace hexane, considering its higher TAG extractability and suitability for the membrane-augmented solvent recycling process in the extraction plants.

This comprehensive review offers a chemical analysis of cutting fluids, delving into both their formulation and deformulation processes. The study covers a wide spectrum of cutting fluid formulations, ranging from simple compositions predominantly comprising oils, whether mineral or vegetable, to emulsions. The latter involves the integration of surfactants, encompassing both nonionic and anionic types, along with a diverse array of additives. Concerning oils, the current trend leans towards the use of vegetable oils instead of mineral oils for environmental reasons. As vegetable oils are more prone to oxidation, chemical alterations, the addition of antioxidant may be necessary. The chemical aspects of the different compounds are scrutinized, in order to understand the role of each component and its impact on the fluid\'s lubricating, cooling, anti-wear, and anti-corrosion properties. Furthermore, the review explores the deformulation methodologies employed to dissect cutting fluids. This process involves a two-step approach: separating the aqueous and organic phases of the emulsions by physical or chemical treatments, and subsequently conducting a detailed analysis of each to identify the compounds. Several analytical techniques, including spectrometric or chromatographic, can be employed simultaneously to reveal the chemical structures of samples. This review aims to contribute to the improvement of waste treatment stemming from cutting fluids. By gathering extensive information about the formulation, deformulation, and chemistry of the ingredients, there is a potential to enhance the waste management and disposal effectively.

Vegetable fats and oils are prone to contamination by mineral oil hydrocarbons due to the lipophilic and ubiquitous character of the latter. As the aromatic fraction of these hydrocarbons, MOAH, is associated with carcinogenicity, mutagenicity, and detrimental effects on foetal development, finding strategies to limit or reduce their contamination is highly relevant. Deodorisation (i.e. a refining step) has shown the ability to remove MOAH < C25 in vegetable fats and oils, but there is little information about the structures removed. Therefore, the present study investigated the impact of deodorisation conditions on the removal of different structures of MOAH in spiked coconut oil. An inscribed central composite design was built with time and temperature as variables (0.5-4h, 150-240 °C), while pressure (3 mbar) and steam flow (1 g water/g oil per hour) were kept constant. The analysis of MOAH in the oil was performed using a fully automated liquid chromatography coupled with two parallel comprehensive two-dimensional gas chromatography systems with flame ionisation and time-of-flight mass spectrometric detection. Response surfaces plotting the MOAH loss according to time and temperature were built for different MOAH fractions. The latter were defined based on the number of aromatic rings (>3 or ≤3) and the number of carbon atoms present (C16-C20, C20-C24, C24-C35, C35-C40). It was found that at 200 °C, compounds < C24, including weakly alkylated triaromatics, could be reduced to below the limit of quantification, while at 230 °C, it was possible to remove >60% of the C24-C35 fraction, including pentaromatics of low alkylation.

This study was based on QuEChERS cleanup coupled with UHPLC-MS/MS for the determination of γ-oryzanol compounds in vegetable oils. Several parameters of QuEChERS and UHPLC-MS/MS were studied for purification and detection of γ-oryzanol compounds in oil samples. Under the optimized conditions, the whole pretreatment procedure could be accomplished within 10 min without tedious procedure, larger volume of organic solvent and complicated apparatus. The limit of detections and the limit of quantifications for γ-oryzanol compounds were ranging from 0.1-0.3 µg kg-1 and 0.4-1.0 µg kg-1, respectively. Satisfactory recoveries of all analyts were ranging from 72.2 % to 101.3 %, and the intra-day and inter-day precision were less than 10.6 %. The validation indicated that rice band oil and corn oil were rich in 24-mCAF, CAF, β-SIF, CMF and STF. The QuEChERS-UHPLC-MS/MS simultaneously quantified five γ-oryzanol compounds in lipid matrices and assessed the nutritional and functional substances of vegetable oils.

On-line coupled high performance liquid chromatography-gas chromatography-flame ionisation detection (HPLC-GC-FID) was used to compare the effect of hydrogen, helium and nitrogen as carrier gases on the chromatographic characteristics for the quantification of mineral oil hydrocarbon (MOH) traces in food related matrices. After optimisation of chromatographic parameters nitrogen carrier gas exhibited characteristics equivalent to hydrogen and helium regarding requirements set by current guidelines and standardisation such as linear range, quantification limit and carry over. Though nitrogen expectedly led to greater peak widths, all required separations of standard compounds were sufficient and humps of saturated mineral oil hydrocarbons (MOSH) and aromatic mineral oil hydrocarbons (MOAH) were appropriate to enable quantitation similar to situations where hydrogen or helium had been used. Slightly increased peak widths of individual hump components did not affect shapes and widths of the MOSH and MOAH humps were not significantly affected by the use of nitrogen as carrier gas. Notably, nitrogen carrier gas led to less solvent peak tailing and smaller baseline offset. Overall, nitrogen may be regarded as viable alternative to hydrogen or helium and may even extend the range of quantifiable compounds to highly volatile hydrocarbon eluting directly after the solvent peak.

BACKGROUND: Studies examining the potential association between cooking oil and frailty risk in older adults have produced conflicting outcomes. Therefore, our objective was to explore the relationship between cooking oil (vegetable and animal fat oils), changes in oil usage, and the risk of frailty in older adults.
METHODS: We included 4,838 participants aged ≥ 65 years without frailty (frailty index < 0.25) from the 2011 wave of the Chinese Longitudinal Healthy Longevity Survey. Follow-up occurred in the 2014 and 2018 waves. Cox proportional hazard models were utilized to estimate hazard ratios (HRs) and 95% confidence intervals (CIs) to examine the association between cooking oil and frailty. Additionally, we evaluated the effect of switching cooking oil on frailty during the follow-up period.
RESULTS: During a median follow-up of 3.0 (2.8-6.9) years, 1,348 individuals (27.9%) developed frailty. Compared to those using vegetable oil, users of animal fat oil had a lower risk of frailty (HR = 0.72, 95% CI: 0.61-0.85). Participants who switched from vegetable oil to animal fat oil, as well as those consistently using animal fat oil, had lower risks of frailty with HRs of 0.70 (0.52-0.95) and 0.63 (0.51-0.77) respectively, compared to those who consistently used vegetable oil. Conversely, individuals who switched from animal fat oil to vegetable oil experienced an increased risk of frailty (HR: 1.41, 95% CI: 1.01-1.97).
CONCLUSIONS: The utilization of animal fat oil in cooking exhibited a reduced frailty risk among older adults. Conversely, transitioning from animal fat oil to vegetable oil may elevate the risk. These findings propose that substituting vegetable oil with animal fat oil in the diet may safeguard against frailty.