Increasing frequency and intensity of cyanobacterial blooms in water sources is a growing global issue. Algicides are usually implemented in summer or autumn when blooms break out, however, the blooms will form again when algicide\'s concentration declines to a certain extent. Preventing the recovery and growth of cyanobacteria in early spring may be conducive to abatement of the blooms in summer or autumn. In this study solid sodium percarbonate (SPC) was used as an algicide to suppress recovery and growth of Pseudanabaena sp., a common odour-producing cyanobacterium, in early spring (12 °C). Results showed that 3.0 and 6.0 mg/L SPC were able to kill most of the algal cells after 12 h treatment at 12 °C, and the residual cells gradually died during the re-cultivation period at 25 °C. As a control, although SPC also caused most of algal cells to lyse at 25 °C, regrowth of cells was found during the period of re-cultivation at 25 °C. Transcriptomic analysis revealed that the dysregulated genes were strongly associated with translation and photosynthesis after SPC treatment. All differentially expressed unigenes related to translation and photosynthesis were down-regulated after SPC oxidation at 12 °C, whereas key genes associated with translation and photosynthesis were upregulated after SPC treatment at 25 °C.

Percarbonate encompasses sodium percarbonate (SPC) and composite in-situ generated peroxymonocarbonate (PMC). SPC emerges as a promising alternative to hydrogen peroxide (H2O2), hailed for its superior transportation safety, stability, cost-effectiveness, and eco-friendliness, thereby becoming a staple in advanced oxidation processes for mitigating water pollution. Yet, scholarly literature scarcely explores the deployment of percarbonate-AOPs in eradicating organic contaminants from aquatic systems. Consequently, this review endeavors to demystify the formation mechanisms and challenges associated with reactive oxygen species (ROS) in percarbonate-AOPs, alongside highlighting directions for future inquiry and development. The genesis of ROS encompasses the in situ chemical oxidation of activated SPC (including iron-based activation, discharge plasma, ozone activation, photon activation, and metal-free materials activation) and composite in situ chemical oxidation via PMC (namely, H2O2/NaHCO3/Na2CO3, peroxymonosulfate/NaHCO3/Na2CO3 systems). Moreover, the ROS generated by percarbonate-AOPs, such as •OH, O2•-, CO3•-, HO2•-, 1O2, and HCO4-, can work individually or synergistically to disintegrate target pollutants. Concurrently, this review systematically addresses conceivable obstacles posing percarbonate-AOPs in real-world application from the angle of environmental conditions (pH, temperature, coexisting substances), and potential ecological toxicity. Considering the outlined challenges and advantages, we posit future research directions to amplify the applicability and efficacy of percarbonate-AOPs in tangible settings. It is anticipated that the insights provided in this review will catalyze the progression of percarbonate-AOPs in water purification endeavors and bridge the existing knowledge void.

Dyes pose great threats to the aquatic environment and human health. Fe0-based Fenton-like systems have been widely employed for the degradation of organic dyes. However, the regulation of degradability and recyclability was still unclear. In this study, Rhodamine B (RhB) was served as the model pollutant, hydroxylamine hydrochloride was selected as the RA, the natural photocatalysis system demonstrated stable operation. RA, as performance enhancement agent, was firstly reported in micro/nano-Zero-Valent Iron@Biochar (m/nZVI@BC) based SPC-RA system. Carrier size-fractionated m/nZVI@BC was fabricated by one-step carbothermal method. As a result, RA synergistically interacted with SPC, and the reaction time reduced from 15 min to 4 min. In the 0.010 g m/nZVI@BC-mediated SPC-RA system, over 95% of RhB (100 mg·L-1, 1041.667 mg·g-1) was successfully degraded. The maximum degradation ability could still exceed 1g·g-1 via 5 times repeated applications. Meanwhile, the loss of degradability, caused by halving SPC concentration could be compensated by RA dosage measurement. The entire degradation process was predominantly dominated by free radicals (•OH> 1O2> •O2-> •CO3-). Reactive oxidizing species (ROSs) were primarily excited by α-Fe0, Fe3C and N sites of biochar (BC). Light and BC carrier dedicated slight influence. These discoveries shed a light on the activity and recyclability regulation of catalytic material, aligning with the principles of green chemistry and cleaner production. This study demonstrates a novel approach to efficient management of solid waste disposal, reuse of waste biomass, advanced treatment of dye-containing wastewater, pollution control in aquatic environments.

Tetracycline (TC) was widely used and frequently detected in various water bodies, where the presence of TC posed a significant threat to the health of aquatic organisms. Furthermore, antibiotics were hardly degraded by biological treatment. Thus, in order to enhance the removal of TC, we proposed the use of a novel ultraviolet/sodium percarbonate (UV/SPC) advanced oxidation process and initiated an in-depth study. The study investigated the influence of oxidant dosage, initial pH, UV intensity, and TC concentration on the removal of TC. The results demonstrated that the UV/SPC system efficiently removed TC, with removal efficiency increasing as the SPC concentration increased. Within the pH range of 3-11, TC degradation exhibited minimal variation, indicating the UV/SPC system\'s strong adaptability to pH variations. The research on the impact of the water matrix on TC removal revealed that HCO3- had an inhibitory effect on TC degradation, while NO3- promoted TC degradation. Additionally, the presence of free radical species (·OH, ·CO3-, ·O2-) were detected and rate constants for the secondary reactions (k·OH,TC = 6.3 × 109 L mol-1·s-1, k·CO3-,TC = 3.4 × 108 L mol-1·s-1) were calculated, indicating that ·OH exhibited a stronger oxidative performance compared to ·CO3-. This study did not only present a novel strategy via UV/SPC to remove TC but also uncovered the unique role of ·CO3- for contaminant removal.

The production of short-chain fatty acids (SCFAs) from waste activated sludge (WAS) via anaerobic fermentation is typically restricted by poor sludge decomposition capacity and low substrate-availability. Therefore, the free ammonia (FA)‑sodium percarbonate (SPC) technology was presented to successfully overcome the limitation while addressing unsatisfactory acidogenic fermentation pretreated with sole FA or SPC. It revealed that FA + SPC co-pretreatment could boost the SCFA concentration to 347.1 mg COD/g VSS at 180 mg/L FA and 0.15 g/g TSS SPC. In-depth studies demonstrated that FA + SPC pretreatment greatly improved sludge disintegration, biodegradability of substrates and acidification of hydrolysis products. Furthermore, FA + SPC co-pretreatment stimulated the activity of hydrolytic and acidogenic enzymes but inhibited methanogenic enzymes while changing the microbial structure and promoting the enrichment of fermentation microorganisms. The synergistic effect of FA and SPC in this work improves the yield of SCFAs from WAS and facilitates the study of WAS carbon resource recovery.

The homogeneous sodium percarbonate (SPC) systems are limited by narrow pH range, ineffective consumption of oxidant, and weak reusability of catalyst. Herein, molybdenum (Mo) powder and sodium tripolyphosphate (STPP) were selected to overcome these challenges. Sulfamethoxazole (SMX), as a model contaminant, was almost completely degraded in 60 min with higher removal rate (0.1367 min-1) than the Mo or STPP-absent system. In addition, Mo/STPP-Fe(Ⅲ)/SPC system was cost-effective in terms of oxidant consumption, requiring only 0.2 mM SPC. About activation mechanism, the main active species for SMX degradation was pH-dependent, with hydroxyl radical (·OH) as the dominant active species at pHi = 7 and ·OH, carbonate radical (CO3·-), and superoxide radical (O2·-) derived from a series of chain reaction at pHi = 10, respectively. Due to the generation of various electrophilic free radical, the system exhibited excellent performance towards electron-rich pollutants under a wide pH range. Furthermore, Mo exhibited excellent stability and reusability. SMX was degraded through hydroxylation, N-S cleavage, amino and sulfanilamide oxidation into intermediates whose toxicities were evaluated by Toxicity Estimation Software Tool (T.E.S.T.) software. This work provided new insights to Fe/SPC system towards high-efficiency and low consumption treatment of practical application.

H2O2 is widely used in the treatment of refractory organic pollutants.However, due to its explosive and corrosive chemical characteristics, H2O2 will bring great safety risks and troubles in transportation.So we chose sodium percarbonate(SPC) to be used in catalytic wet peroxide oxidation enhanced by swirl flow(SF-CWPO) and we designed carbon nanotubes with Ni single atom sites(Ni-NCNTs/AC) to activate SPC to treat an m-cresol wastewater containing Si.Meanwhile, artificial intelligence which used Artificial neural network (ANN) was used to optimize the conditions.Under the conditions of pH = 9.27, reaction time of 8.91 min, m-cresol concentration is 59.09 mg L-1, SPC dosage is 2.80 g L-1 and Na2SiO3·9H2O dosage is 77.27 mg L-1, the degradation rate of total organic carbon(TOC) and m-cresol reaches 94.37% and 100%, respectively.Finally, the applicability of Ni-NCNTs/AC-SPC-SF-CWPO technology was evaluated in a wastewater system of a sewage treatment enterprise and Fourier transform ion cyclotron resonance mass spectrum(FT-ICR MS) analysis and chemical oxygen demand(COD) analysis showed the great ability of Ni-NCNTs/AC-SPC-SF-CWPO technology to treat wastewater.It is believed that this paper is of great significance to the design and construction of the in-depth research and industrial application of SF-CWPO.

In-situ chemical oxidation based on sodium percarbonate (SPC) has received much attention for remediation of groundwater contaminated with organic pollutants due to the high efficiency, stable reaction, and sustainability of SPC. Currently, metal ions and their composite materials, are mainly employed for the activation of SPC. However, due to its narrow pH range, slow Fe3+/Fe2+ circulation, and generation of refractory sludge, its application in groundwater is limited. In this study, SPC was activated with natural pyrite (FeS2) to remove tetracycline, which was selected as the target pollutant. FeS2 exhibited excellent catalytic activity and stability towards the degradation of tetracycline. The tetracycline degradation efficiency of SPC/FeS2 system reached 70 % within 10 min, and nearly half of the tetracycline was degraded in the first 5 min of the reaction. The optimum SPC dosage for the tetracycline removal was 8 mM, with FeS2 dosage of 0.5 g/L. The tetracycline removal efficiency remained above 60 % after 4 cycles, indicating its good recycling efficiency of the system. SPC/FeS2 system was not significantly affected by the initial pH or the presence of Cl-, SO42-, NO3- while, HCO3-, Ca2+, Mg2+, and humid acid suppressed the reaction. The electron paramagnetic resonance spectroscopy and quenching experiments demonstrated that OH and O2- played a dominant role in tetracycline removal by the system. S22-, as an electron donor, was able to participate in the Fe3+/Fe2+ cycle. In addition, the 13 transformation products were determined by liquid chromatography-mass spectrometry predicted that the degradation pathway of tetracycline consisted of hydroxylation, demethylation, and decarbonylation reactions. Finally, the dynamic simulation experiments of SPC/FeS2 sand column showed that FeS2 effectively activated SPC and significantly reduced the toxicity in groundwater after the packed column treatment. This study reveals that FeS2 can efficiently activate SPC and has good prospects for tetracycline-contaminated groundwater remediation applications.

Tetracycline (TC) and Oxytetracycline (OTC) are common antibiotics increasingly detected in the environment, posing a potential risk to human and aquatic lives. Although conventional methods such as adsorption and photocatalysis are used for the degradation of TC and OTC, they are inefficient in removal efficiency, energy yield, and toxic byproduct generation. Herein, a falling-film dielectric barrier discharge (DBD) reactor coupled with environmentally friendly oxidants (hydrogen peroxide (HPO), sodium percarbonate (SPC), and HPO + SPC) was applied, and the treatment efficiency of TC and OTC was investigated. Experimental results showed that moderate addition of the HPO and SPC exhibited a synergistic effect (SF > 2), significantly improving the antibiotic removal ratio, total organic removal ratio (TOC), and energy yield by more than 50%, 52%, and 180%, respectively. After 10 min of DBD treatment, the introduction of 0.2 mM SPC led to a 100% antibiotic removal ratio and a TOC removal of 53.4% and 61.2% for 200 mg/L TC and 200 mg/L OTC, respectively. Also, 1 mM HPO dosage led to 100% antibiotic removal ratios after 10 min of DBD treatment and a TOC removal of 62.4% and 71.9% for 200 mg/L TC and 200 mg/L OTC, respectively. However, the DBD + HPO + SPC treatment method had a detrimental effect on the performance of the DBD reactor. After 10 min of DBD plasma discharge, the removal ratios for TC and OTC were 80.8% and 84.1%, respectively, when 0.5 mM HPO + 0.5 mM SPC was added. Moreover, principal component and hierarchical cluster analysis confirmed the differences between the treatment methods. Furthermore, the concentration of oxidant-induced in-situ generated ozone and hydrogen peroxide were quantitatively determined, and their indispensable roles during the degradation process were established via radical scavenger tests. Finally, the synergetic antibiotic degradation mechanisms and pathways were proposed, and the toxicities of the intermediate byproducts were evaluated.

Despite significant advancements in tissue engineering and regenerative medicine during the last two decades, the fabrication of proper scaffolds with appropriate cells can still be considered a critical achievement in this field. Hypoxia is a major stumbling block to chronic wound healing, which restrains tissue engineering plans because a lack of oxygen may cause cell death. This study evaluated the cocultured human keratinocytes and human adipose-derived mesenchymal stem cells (AMSCs) on a multilayer oxygen-releasing electrospun scaffold based on PU/PCL.Sodium percarbonate (SPC)-gelatin/PU. The scaffold was characterized using Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) methods. Flow cytometry confirmed mesenchymal stem cells, and then the 3-(4,5-dimethylthiazol-2-yl)-2,5 diphenyltetrazolium bromide (MTT) assay and DAPI staining were used to assess the in vitro biocompatibility of the scaffold. The experimental results showed that the multilayer electrospun scaffold containing 2.5% SPC could efficiently produce oxygen. Furthermore, according to cell viability results, this structure makes a suitable substrate for the coculture of keratinocytes and AMSCs. Gene expression analysis of various markers such as Involucrin, Cytokeratin 10, and Cytokeratin 14 after 14 days confirmed that keratinocytes and AMSCs coculture on PU/PCL.SPC-gelatin/PU electrospun scaffold promotes dermal differentiation and epithelial proliferation compared to keratinocytes single-cell culture. Therefore, our study supports using oxygen-releasing scaffolds as a potential strategy to hasten skin tissue regeneration. Based on the results, this structure is suggested as a promising candidate for cell-based skin tissue engineering. Given that the developed oxygen-generating polymeric electrospun scaffolds could be used as part of a future strategy for skin tissue engineering, the PU/PCL.SPC-gelatin/PU hybrid electrospun multilayer scaffold in combination with keratinocyte/AMSC coculture is proposed as an effective substrate for skin tissue engineering and regenerative medicine platforms.