BACKGROUND: To assess changes in ocular biometry of the phakic eye after pars-plana-vitrectomy (PPV) and silicone oil (SO) endotamponade in eyes with a retinal detachment.
METHODS: This retrospective, consecutive case series included 72 eyes of 72 patients who underwent PPV with 5000-centistokes SO endotamponade between July 2018 and June 2023. Pseudophakic eyes and eyes with a combined phacovitrectomy were excluded. Primary endpoints were keratometry values, anterior chamber depth (ACD), lens thickness (LT), horizontal corneal diameter (HCD), and axial length (AL) measured by swept-source optical coherence tomography-based biometry (IOLMaster 700) preoperatively and six weeks postoperatively. A recently described formula was used to adjust the AL (aAL) in eyes with SO endotamponade and a theoretical intraocular lens (IOL) calculation was performed.
RESULTS: The mean age was 62.1 ± 8.3 years (range: 37-85). After PPV with SO fill, there was an increase in Kmean (0.19 ± 0.51D), while ACD (0.05 ± 0.13 mm), LT (0.03 ± 0.14 mm), and HCD (0.02 ± 0.24 mm) decreased. Preoperatively, the mean AL was 25.22 ± 1.78 mm, while postoperatively the AL was overestimated by 0.12 ± 0.42 mm on average (p = 0.04). By adjusting the AL, the mean difference could be reduced to -0.002 ± 0.41 mm. The aAL resulted in a difference in the refractive outcome in eyes with an AL > 25 mm of 0.34 ± 0.10D in the IOL calculation.
CONCLUSIONS: While changes in biometry after PPV with SO endotamponade in the anterior segment are clinically less relevant, a considerable overestimation of AL with IOLMaster 700 was found. We recommend the use of a recently introduced formula for adjusting AL in eyes with SO, allowing overestimation to be minimised considerably.

OBJECTIVE: The purpose of the study was to audit the primary and final success rate for primary rhegmatogenous retinal detachment (RRD) surgery performed between 2017 and 2022 at the Department of Ophthalmology in Salmanyia Medical Complex, the Kingdom of Bahrain. In addition, secondary outcomes for our study include assessments of risk factors for recurrence, final visual outcomes and complication rates.
METHODS: Prospective observational study showed data analysis of case series for 75 RRD patients operated during the study period. All patients who met the inclusion criteria were included in the study and evaluated by a specialized vitreoretinal surgeon before and after their operation. All patients were operated by the same surgeon (M.A) in the study period. Data collected from the hospital\'s electronic medical recording system (I-Seha) include macular state, pre- and postoperative best-corrected visual acuity, duration of symptoms, the presence of proliferative vitreoretinopathy (PVR), retinal breaks and their locations, any ocular comorbidities associated in the perioperative period such as increase in intraocular pressure or development of cataract, and operative notes related to the type of primary, secondary, and tertiary surgery if needed.
RESULTS: A total number of 70 eyes from 70 patients with the majority of male patients (74.28%, n = 52) were included in the study. The mean age of the participants was 54.75 years (range: 11-91 years). Most of the patients 48.57% presented within 6 days of symptoms. Nearly 77.1% of the operated cases were macula off, whereas 22.85% were macula on. Thirty-six of the eyes (51.4%) had complex RRD with a combination of PVR (34.2%). Sixty-three of the eyes (51.4%) underwent standard 23G pars plana vitrectomy, while the combined surgery with a scleral buckle was performed on 9 eyes (12.8%). Five patients underwent pneumatic retinopexy and two patients had primary scleral buckles. Combined phacoemulsification with vitrectomy in selected cases was performed on 13 eyes (18.5%). Different tamponading agents were used 35 eyes (50%) silicon oil, 17 eyes (24%) C3F8, and 18 eyes (25%) SF6. The primary reattachment rate after one operation was 77.1% (54 eyes). The final reattachment rate following a second or third procedure was 95.7%. The mean postoperative visual acuity was 6/18 (range: 6/6 to hand motions). Thirty percent of the cohort of patients had a visual acuity of 6/12 or better. Sixteen out of the 70 eyes redetached (22.8%) and 10 of those eyes (62.5%) were classified as \"complex\" preoperatively which is thought to be a significant risk factor for failure.
CONCLUSIONS: Our audit overall met international success rates despite the presence of some complex scenarios which required multiple surgical interventions. The primary use of gas or silicon oil did not influence reattachment rates but had a statistical significance when it came to final visual outcomes.

For many industrial applications, the simultaneous presence in a material of different functional properties is necessary. The main interest lies in making a single material more versatile and durable, less fragile and more efficient. In this study, two concomitant properties in the same material were mainly studied: resistance to cracking and the increase in its hydrophobic properties. The chosen process was the sol-gel route due to its versatility and the ease of formulating materials from various precursors in order to obtain (multi)functional materials. In this paper, sol-gel coatings were prepared with tetraethoxysilane, methyltrimethoxysilane and diethoxydimethylsilane as precursors. Tetraethoxysilane was mainly used to improve the material\'s mechanical properties, especially hardness, and silicon oil was added to improve its hydrophobic behavior. The integration of silicon oil was monitored via 29Si NMR. Microstructural characterizations were carried out to correlate the multi-scale properties with the microstructure of the derived films. Young\'s modulus and hardness were measured to highlight the effect of key formulation parameters on the mechanical strength of the coatings. The synergistic effect of these precursors is underlined as well as the beneficial effect of silicon oil (generated in situ or precondensed).

The aim of this study was to analyze the long-term outcome of first session of micropulse transscleral cyclophotocoagulation (MP-CPC) for refractory glaucoma developed after vitreoretinal surgery combined with silicone oil implantation. The inclusion criteria of this consecutive case series were: patients with secondary glaucoma in the refractory stage who underwent MP-CPC between 2018 and 2021, vitreoretinal surgery combined with silicon oil implantation, and at least a 24-month follow-up period after MP-CPC. Success was defined as the baseline eye pressure reduced at least 20%, and it should be ranged between 10 to 20 mmHg without further MP-CPC at the end of the follow-up. For this retrospective study, 11 eyes of 11 patients were selected. The reduction in IOP was found to be significant (p = 0.004) at the end of the follow-up time, and the success rate was 72% according to our results. The change in the number of antiglaucoma agents in the administered eyedrops was not significant compared to the baseline values. At the end of the follow-up period the change in BCVA values was not significant (p = 0.655). Our results confirm significant IOP lowering effect of this subthreshold method preserving visual performance safely even in eyes with previous vitrectomy surgery with a silicone oil implantation.

This report describes a case of acute pupillary block glaucoma related to migration of nonemulsified silicone oil into the anterior chamber (AC) in a young phakic patient. A 24-year-old male diabetic patient underwent uneventful left eye pars plana vitrectomy (PPV) with silicon oil endotamponade for diabetic macula-off tractional retinal detachment. Two weeks after discharge, he presented with severe left eye pain. Examination revealed hand motion vision, high intraocular pressure (IOP) of 67 mmHg with ciliary injection, corneal edema, and two large nonemulsified silicone oil bubbles in the AC at the pupillary margin. Medical management with topical antiglaucoma medications (AGMs) and intravenous acetazolamide and mannitol failed to reduce the IOP. The patient underwent left eye PPV, silicone oil removal, and AC wash. IOP was eventually controlled after the operation without AGM. Pupillary block glaucoma after silicone oil injection is well recognized in aphakic patients, but ophthalmologists should be aware that it can occur in phakic and pseudophakic patients, particularly in complicated cases and patients with a weakness of the iris-lens diaphragm.

Background: The aim of this study was to assess long-term macular vascular changes and their correlation with functional recovery in patients successfully treated for Macula-ON and Macula-OFF rhegmatogenous retinal detachment (RRD). Methods: This retrospective observational study included 82 eyes of 82 patients who received primary successful retinal detachment surgery, 33 Macula-ON and 49 Macula-OFF. Superficial and deep capillary plexuses (SCP and DCP) were evaluated by optical coherence tomography angiography (OCTA), and were correlated with visual acuity (VA), surgical technique and tamponade at 12 months after surgery. The fellow eyes were used as controls. Results: At 12-month follow-up, there was a significant decrease in the vessel density (VD) in the SCP in the operated eyes compared to control eyes (p < 0.05) in both the Macula-ON and Macula-OFF groups. Vessel length density (VLD) decrease in SCP was more extended in the Macula-OFF group. No difference in the DCP perfusion parameters was found, compared to controls. Subgroup analysis dependent on the type of surgery or tamponade showed no significant differences of VD and VLD. An inverse correlation was found between the SCP VD and the duration of silicone oil (SO) tamponade (p = 0.039). A significant correlation was observed between parafoveal SCP VD and final best corrected visual acuity (BCVA) (p = 0.028). The multivariate linear regression analysis showed that only the type of tamponade was significantly correlated with the final BCVA in the Macula-ON group (p = 0.004). Conclusions: Our study described long-term perfusion changes in RRD after surgery, with lower SCP VD and VLD in the operated eyes compared to the fellow ones, not influenced by type of surgery or tamponade. The choice of tamponade and SO removal timing may affect functional outcomes, especially in Macula-ON RRD. In conclusion, such functional and perfusion changes can be considered biomarkers that highlight the relevance of careful management of this sight-threatening disease.

OBJECTIVE: To evaluate the outcomes and complications of simultaneous silicon oil removal (SOR) and phacoemulsification and intra ocular lens implantation.
METHODS: In this retrospective non-comparative case series, the visual, refractive and anatomical outcomes of patients who underwent combined phacoemulsification/silicone oil removal (5700 centistokes) surgery between 2017 and 2019 in a single center were evaluated.
RESULTS: Forty-four eyes of 44 patients (eighteen males) were included. The mean age of the patients was 51.45 ± 11.59 years. The primary pathology was tractional retinal detachment (TRD) secondary to diabetic retinopathy in 36 eyes and rhegmatogenous retinal detachment (RRD) in 8 eyes. The median time period between silicone oil tamponade and removal was 9 months. There was no statistically significant difference between best corrected visual acuity (-0.14 ± 0.69 LogMAR, p= 0.19) and intraocular pressure (p= 0.26) before and after the surgery. Mean post-operative spherical equivalent (SE) at last visit was 0.36 ± 1.64 which was different from the target refraction (- 0.5D). After cataract/SOR surgery, one eye (2.3%) developed retinal re-detachment in RRD patient. Vitreous hemorrhage occurred in nine eyes (20.5%) which all had TRD as the primary pathology.
CONCLUSIONS: Combined phacoemulsification, silicone oil and IOL implantation removal surgery seems to be a safe and useful procedure with high success rate and acceptable visual, refractive and anatomical outcomes.

BACKGROUND: Coats\' disease was originally defined as a unilateral idiopathic exudative retinopathy in young males, characterized by abnormal retinal vascular telangiectasia with intraretinal and subretinal lipid exudation. The retinal detachment is usually exudative. Herein, we describe a case of rhegmatogenous retinal detachment with detectable retinal break in a patient with Coats\' disease.
METHODS: A 15-year-old Indo-Aryan male patient presented with sudden painless diminution of vision in his right eye of 4 days duration. Upon examination, the anterior segment in both eyes and left fundus was within normal limits. Dilated fundus evaluation of the right eye revealed telangiectasia of the retinal vessels, with subretinal exudation in superotemporal and superonasal quadrants and presence of subretinal fluid in the superotemporal area extending into fovea. There was also presence of single flap horseshoe tear in the superotemporal quadrant at around the 10 o\'clock position in the equatorial region, with no secondary changes. The retina was reattached with encircling band buckle combined with vitrectomy and silicon oil tamponade. Seven months post vitrectomy, lenticular opacification developed, for which he underwent silicon oil removal, along with lens aspiration and implantation of foldable intraocular lens. Over the period of 1 year, his best corrected visual acuity improved from 6/60 to 6/18 in the affected eye at the last follow-up visit. The recovery was uneventful following the subsequent surgery.
CONCLUSIONS: Coats\' disease has a remarkable diversity in clinical presentation and morphology. The disease can also present with an underlying break, which may not be attributed to any iatrogenic modality. The treatment modalities in coats\' disease should be tailored individually due to the low incidence of the disease and the great variation in severity upon presentation. Prompt management restores the best possible anatomical outcome and maintains good vision.

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF) is a powerful technique for analysis of various polymers, but it is still very difficult to characterize silicone oil due to its poor ionization efficiency. In this work, oligomeric hydroxyl silicone oils were successfully characterized by MALDI-TOF, by using pyridine-modified 2,5-dihydroxylbenzoic acid (DHB) as the matrix. Furthermore, the mixed crystal of DHB and hydroxyl silicone oil was analyzed by scanning electron microscopy (SEM) and energy disperse spectroscopy (EDS), and the analytical results verified that modification with pyridine could remarkably improve the solubility of hydroxyl silicone oil in DHB, leading to the enhancement of its ionization efficiency in MALDI. The analysis of the MS spectra of a series of hydroxyl silicone oils indicated that they tended to be ionized by the attachment with Na+, and the average molecular weight and the degree of polymerization were measured for several oligomeric hydroxyl silicon oils.

Polycarbonate sheets are optically transparent and have the potential to be used as one of the cover materials for PV applications. Solution treatment of polycarbonate surfaces enables to create surface texture topology giving rise to a hydrophobic state, which is favorable for self-cleaning applications. In the present study, hydrophobization of polycarbonate surface is investigated via crystallization of surface by a one-step process. The influence of texture topology, which is created via crystallization, on water droplet mobility and optical transmittance is examined. Findings revealed that solution treatment, using acetone, results in crystallized polycarbonate surfaces with a hydrophobic state. Depending on the treatment duration, the texture characteristics of crystallized surface change while influencing the water contact angle hysteresis. This in turn affects the droplet mobility over the inclined crystallized surface and alters the UV visible transmittance. Moreover, the droplet mobility improves and dust mitigation rates from the treated surface increase as the solution treatment duration are reduced to 2 min. Oil impregnated samples result in improved UV visible transmittance; however, droplet motion changes from rolling to sliding over the surface. A sliding water droplet enables the removal of the dust particles from the oil-impregnated sample surface.