Organic optoelectronic devices have received appreciable attention due to their low cost, mechanical flexibility, band-gap engineering, lightness, and solution processability over a broad area. Specifically, realizing sustainability in organic optoelectronics, especially in solar cells and light-emitting devices, is a crucial milestone in the evolution of green electronics. Recently, the utilization of biological materials has appeared as an efficient means to alter the interfacial properties, and hence improve the performance, lifetime and stability of organic light-emitting diodes (OLEDs). Biological materials can be known as essential renewable bio-resources obtained from plants, animals and microorganisms. The application of biological interfacial materials (BIMs) in OLEDs is still in its early phase compared to the conventional synthetic interfacial materials; however, their fascinating features (such as their eco-friendly nature, biodegradability, easy modification, sustainability, biocompatibility, versatile structures, proton conductivity and rich functional groups) are compelling researchers around the world to construct innovative devices with enhanced efficiency. In this regard, we provide an extensive review of BIMs and their significance in the evolution of next-generation OLED devices. We highlight the electrical and physical properties of different BIMs, and address how such characteristics have been recently exploited to make efficient OLED devices. Biological materials such as ampicillin, deoxyribonucleic acid (DNA), nucleobases (NBs) and lignin derivatives have demonstrated significant potential as hole/electron transport layers as well as hole/electron blocking layers for OLED devices. Biological materials capable of generating a strong interfacial dipole can be considered as a promising prospect for alternative interlayer materials for OLED applications.

Short-wavelength infrared (SWIR) organic light-emitting diodes (OLEDs) have attracted great interest due to their potential applications in biological imaging, infrared lighting, optical communication, environmental monitoring, and surveillance. Due to an intrinsic limitation posed by the energy-gap law, achieving high-brightness in SWIR OLEDs remains a challenge. Herein, the study reports the use of novel A-D-A\'-D-A type small molecules NTQ and BTQ for high-performance SWIR OLEDs. Benefiting from multiple D-A effect in conjugated skeleton, the small molecules NTQ and BTQ exhibit narrow optical gaps of 1.23 and 1.13 eV, respectively. SWIR electroluminescence (EL) emission from OLEDs based on NTQ and BTQ is achieved, with emission peaks at 1140 and 1175 nm, respectively. Not only owing to a negligible efficiency roll-off across the full range of applied current density but also the ability to afford a high operation current density of 5200 mA cm-2 , the resultant SWIR OLEDs based on NTQ exhibit a maximal radiant exitance of =1.12 mW cm-2 . Furthermore, the NTQ-based OLEDs also possess sub-gap turn-on voltage of 0.85 V, which is close to the physical limits derived from the generalized Kirchhoff and Planck equation. This work demonstrates that A-D-A\'-D-A type small molecules offer significant promise for NIR/SWIR emitting material innovations.

Developing highly efficient blue thermally activated delayed fluorescence (TADF) emitters with a narrowband emission is still a challenge. Here, novel ultrapure blue TADF emitters of TSBA-Cz and TSBA-PhCz were designed and synthesized for organic light-emitting diodes (OLEDs). Photophysical and time-dependent density functional theory calculation results simultaneously show the similar intramolecular charge-transfer character of MR-type TADF emitters. Benefiting from the symmetrical and rigid molecular configuration, compounds TSBA-Cz and TSBA-PhCz emit a pure blue emission peak at 463 and 470 nm, a narrow full width at half-maximum (FWHM) of 30 and 36 nm, and a small singlet-triplet energy gap (ΔEST) of 0.21 and 0.18 eV, respectively, facilitating their excellent TADF behavior in doped films. Furthermore, highly efficient TADF-OLED devices using the TSBA-Cz and TSBA-PhCz with external quantum efficiencies of 23.4 and 21.3% emit ultrapure blue electroluminescence (EL) at 464 and 472 nm with a narrow FWHM of about 35 nm and CIE color coordinates of (0.14, 0.11) and (0.12, 0.18). This work provides novel TADF emitters for blue OLEDs with narrowband EL.

Purely organic emitters have shown great potential but still suffer from low efficiency in near-infrared organic light-emitting diodes (NIR-OLEDs) due to the intensive non-radiative recombination. In this contribution, two pairs of thermally activated delayed fluorescence (TADF) enantiomers (R/S-DOBP and R/S-HDOBP) with tetracoordinate boron geometries were designed and synthesized. The TADF emitters simultaneously showed aggregation-induced emission, circularly polarized luminescence, high-contrast mechanochromism, and piezochromism behaviors. More importantly, R/S-DOBP and R/S-HDOBP revealed high photoluminescence quantum yields and efficient reverse intersystem crossing in neat films. The nondoped solution-processed OLEDs based on these unique emitters revealed the NIR emission (peaking at 716 nm) with a maximum external quantum efficiency of 1.9 % and high exciton utilization efficiency of 86 %, which represent one of the best solution-processed nondoped NIR-OLEDs.

Ensuring the long-term stability of high-performance organic light-emitting diodes (OLEDs) has remained a great challenge due to their limited lifetime and durability. Herein, a novel functional interlayer consisting of a poly(amic acid)-polyimide copolymer is introduced for use in OLEDs. It is shown that an OLED sample with a polyimide-copolymer interlayer exhibits high peak brightness of nearly 96 000 cd m-2 and efficiency of ≈92 cd A-1 , much higher than those (≈73 000 cd m-2 and ≈83 cd A-1 ) of a well-organized reference OLED. Moreover, the growth of dark spots is strongly suppressed in the sample OLED and the device lifetime is extended considerably. Further, highly stable and uniform large-area OLEDs are successfully produced when using the interlayer. These improvements are ascribed not only to the excellent film-forming and hole-transferring properties but also to the inner passivating capability of the polyimide-copolymer interlayer. The results here suggest that the introduction of an inner passivating/encapsulating hole-transferable polyimide-copolymer interlayer together with conventional external encapsulation technology represents a promising breakthrough that enhances the longevity of high-performance next-generation OLEDs.

Photoresponsive functionalized nanofilms were prepared via radical polymerization of carbazole units on a nanofibrillated cellulose (NFC) backbone via one-pot procedure. Herein, NFC was functionalized with active carbazole units as pendant organic moieties. The nanofilms were characterized by UV-vis and fluorescence spectroscopy, Fourier transformed infrared (FTIR) and Raman spectroscopy, 13C NMR and proton NMR spectra, contact angle analysis, mechanical testing, and scanning electron microscopy (SEM). The fabricated nanofilms exhibited large tensile strength (∼110 MPa), higher hydrophobicity and luminescence activity. The results indicated that the prepared optically active nanofilms present potential applications in the fields of flexible organic light emitting devices.

The operational lifetime of organic light-emitting devices (OLEDs) is governed primarily by the intrinsic degradation of the materials. Therefore, a chemical model capable of predicting the operational stability is highly important. Here, a degradation model for OLEDs that exhibit thermally activated delayed fluorescence (TADF) is constructed and validated. The degradation model involves Langevin recombination of charge carriers on hosts, followed by the generation of a polaron pair through reductive electron transfer from a dopant to a host exciton as the initiation steps. The polarons undergo spontaneous decomposition, which competes with ultrafast recovery of the intact materials through charge recombination. Electrical and spectroscopic investigations provide information about the kinetics of each step in the operation and degradation of the devices, thereby enabling the building of mass balances for the key species in the emitting layers. Numerical solutions enable predictions of temporal decreases of the dopant concentration in various TADF emitting layers. The simulation results are in good agreement with experimental operational stabilities. This research disentangles the chemical processes in intrinsic electron-transfer degradation, and provides a useful foundation for improving the longevity of OLEDs.

N-Heterocyclic carbene (NHC) cyclometalated gold(III) complexes remain very scarce and therefore their photophysical properties remain currently underexplored. Moreover, gold(III) complexes emitting in the blue region of the electromagnetic spectrum are rare. In this work, a series of four phosphorescent gold(III) complexes was investigated bearing four different NHC monocyclometalated (C^C*)-type ligands and a dianionic (N^N)-type ancillary ligand ((N^N)=5,5\'-(propane-2,2-diyl)bis(3-(trifluoromethyl)-1 H-pyrazole) (mepzH2 )). The complexes exhibit strong phosphorescence when doped in poly(methyl methacrylate) (PMMA) at room temperature, which were systematically tuned from sky-blue [λPL =456 nm, CIE coordinates: (0.20, 034)] to green [λPL =516 nm, CIE coordinates: (0.31, 0.54)] by varying the monocyclometalated (C^C*) ligand framework. The complexes revealed high quantum efficiencies (ϕPL ) of up to 43 % and excited-state lifetimes (τ0 ) between 15-266 μs. The radiative rate constant values found for these complexes (kr =103 -104  s-1 ) are the highest found in comparison to previously known best-performing monocyclometalated gold(III) complexes. Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations of these complexes further lend support to the excited-state nature of these complexes. The calculations showed a significant contribution of the gold(III) metal center in the lowest unoccupied molecular orbitals (LUMOs) of up to 18 %, which was found to be unique for this class of cyclometalated gold(III) complexes. Additionally, organic light-emitting diodes (OLEDs) were fabricated by using a solution process to provide the first insight into the electroluminescent (EL) properties of this new class of gold(III) complexes.

Phosphorescent dopants are promising candidates for organic light-emitting diodes (OLEDs). Although it has been established that the out-coupling efficiency and overall performances of vacuum-deposited OLEDs can be significantly improved by a horizontal orientation of the dopants, no horizontally oriented gold(III) complexes have been reported to date. Herein, a novel class of tetradentate C^C^N^N ligand-containing gold(III) complexes with a preferential horizontal orientation successfully generated through a one-pot reaction is reported. These complexes demonstrate high photoluminescence quantum yields of 70 % and a high horizontal dipole ratio of 0.87 in solid-state thin films. Green-emitting OLEDs based on these complexes operate with a maximum external quantum efficiency of 20.6 % with an estimated out-coupling efficiency of around 30 %. A promising device stability has been achieved in the vacuum-deposited OLEDs, with operational half-lifetimes of around 37 500 h at 100 cd m-2 .

A new class of sky-blue- to green-emitting carbazolylgold(III) C^C^N complexes containing pyrazole or benzimidazole moieties has been successfully designed and synthesized. Through the judicious choice of the N-heterocycles in the cyclometalating ligand and the tailor-made carbazole moieties, maximum photoluminescence quantum yields of 0.52 and 0.39 have been realized in the green- and sky-blue-emitting complexes, respectively. Solution-processed and vacuum-deposited organic light-emitting devices (OLEDs) based on the benzimidazole-containing complexes have been prepared. The sky-blue-emitting device shows an emission peaking at 484 nm with a narrow full-width at half-maximum of 57 nm (2244 cm-1 ), demonstrating the potential of this class of complexes in the application of OLEDs with high color purity. In addition, high maximum external quantum efficiencies of 12.3 % and a long operational half-lifetime of over 5300 h at 100 cd m-2 have been achieved in the vacuum-deposited green-emitting devices.