Green synthesis of nanomaterials is advancing due to their ease of synthesis, cheapness, nontoxicity, and renewability. An environmentally friendly biogenic method has been developed for the green synthesis of nickel oxide nanoparticles (NiO NPs) using phytochemical-rich bioextract. They are rich in bioextract phenolics, flavonoids, and berberine. These phytochemicals successfully reduce and stabilize NiNO3 into NiO NPs. In this study, NiO NPs were synthesized by the green synthesis method from Lupinus Albus. Characterization of NiO NPs was carried out by TEM, XRD, SEM, UV, XRF, BET, and EDX analyses. According to XRD analysis, TEM results also support this, where the NiO NPs particle size diameter is 5 nm. It was determined by the Tauc equation that the band energy gap of NiO NPs is 1.69 eV. It was determined that the BET surface area of NiO NPs was 49.6 m2/g. NiO nanoparticles synthesized from Lupinus Albus extract by the green synthesis method were used as catalysts in the photocatalytic reduction of methylene blue with NaBH4. In the photocatalytic reduction of methylene blue with NaBH4, it was determined that there was no color change in 48 h without a catalyst, and in the presence of NiO nanoparticle catalyst, methylene blue was reduced by 97% in 8 min. The kinetics of the photocatalytic reduction of methylene blue with NaBH4 is a pseudo-first-order kinetic model and the kinetic rate constant is determined as 0.66 min-1, indicating that the catalytic effect of NiO NPs is very high at this value. NiO NPs were used five times in the photocatalytic reduction of methylene blue with NaBH4 and it was determined that the reduction of methylene blue was over 90% in each use.
NiO nanoparticles were synthesized from Lupinus Albus extract by green synthesis, which is an easily applied, cost-effective, and environmentally friendly method. The synthesized NiO nanoparticles were characterized using various characterization techniques. NiO nanoparticles have a high catalytic effect in the photocatalytic reduction of methylene blue with NaBH4. Photocatalytic reduction of methylene blue with uncatalyzed NaBH4 could not be achieved, and 97% reduction of methylene blue was completed in 8 min in the presence of NiO nanoparticle catalyst.

The growing demand for wearable and attachable displays has sparked significant interest in flexible quantum-dot light-emitting diodes (QLEDs). However, the challenges of fabricating and operating QLEDs on flexible substrates persist due to the lack of stable and low-temperature processable charge-injection/-transporting layers with aligned energy levels. In this study, we utilized NiOx nanoparticles that are compatible with flexible substrates as a hole-injection layer (HIL). To enhance the work function of the NiOx HIL, we introduced a self-assembled dipole modifier called 4-(trifluoromethyl)benzoic acid (4-CF3-BA) onto the surface of the NiOx nanoparticles. The incorporation of the dipole molecules through adsorption treatment has significantly changed the wettability and electronic characteristics of NiOx nanoparticles, resulting in the formation of NiO(OH) at the interface and a shift in vacuum level. The alteration of surface electronic states of the NiOx nanoparticles not only improves the carrier balance by reducing the hole injection barrier but also prevents exciton quenching by passivating defects in the film. Consequently, the NiOx-based red QLEDs with interfacial modification demonstrate a maximum current efficiency of 16.1 cd/A and a peak external quantum efficiency of 10.3%. This represents a nearly twofold efficiency enhancement compared to control devices. The mild fabrication requirements and low annealing temperatures suggest potential applications of dipole molecule-modified NiOx nanoparticles in flexible optoelectronic devices.

The recombination of charge carriers at the interface between carrier transport layers such as nickel oxide (NiOx) and the perovskite absorber has long been a challenge in perovskite solar cells (PSCs). To address this issue, we introduced a polymer additive poly(vinyl butyral) into NiOx and subjected it to high-temperature annealing to form a void-containing structure. The formation of voids is confirmed to increase light transmittance and surface area of NiOx, which is beneficial for light absorption and carrier separation within PSCs. Experimental results demonstrate that the incorporation of the polymer additive helped to enhance the hole conductivity and carrier extraction of NiOx with a higher Ni3+/Ni2+ ratio. This also optimized the energy levels of NiOx to match with the perovskite to raise the open-circuit voltage to 1.01 V. By incorporating an additional NiOx layer beneath the polymer-modified NiOx, the device efficiency was further increased as verified from the dark current measurement of devices.

Crystal facet and defect engineering are crucial for designing heterogeneous catalysts. In this study, different solvents were utilized to generate NiO with distinct shapes (hexagonal layers, rods, and spheres) using nickel-based metal-organic frameworks (MOFs) as precursors. It was shown that the exposed crystal facets of NiO with different morphologies differed from each other. Various characterization techniques and density functional theory (DFT) calculations revealed that hexagonal-layered NiO (NiO-L) possessed excellent low-temperature reducibility and oxygen migration ability. The (111) crystal plane of NiO-L contained more lattice defects and oxygen vacancies, resulting in enhanced propane oxidation due to its highest O2 adsorption energy. Furthermore, the higher the surface active oxygen species and surface oxygen vacancy concentrations, the lower the C-H activation energy of the NiO catalyst and hence the better the catalytic activity for the oxidation of propane. Consequently, NiO-L exhibited remarkable catalytic activity and good stability for propane oxidation. This study provided a simple strategy for controlling NiO crystal facets, and demonstrated that the oxygen defects could be more easily formed on NiO(111) facets, thus would be beneficial for the activation of C-H bonds in propane. In addition, the results of this work can be extended to the other fields, such as propane oxidation to propene, fuel cells, and photocatalysis.

Air-processed perovskite solar cells (PSCs) with high photoelectric conversion efficiency (PCE) can not only further reduce the production cost but also promote its industrialization. During the preparation of the PSCs in ambient air, the contact of the buried interface not only affects the crystallization of the perovskite film but also affects the interface carrier transport, which is directly related to the performance of the device. Here, we optimize the buried interface by introducing 3-mercaptopropyltrimethoxysilane (MPTMS, (CH3O)3Si(CH2)3SH) on the nickel oxide (NiOx) surface. The crystallization of the perovskite film is improved by enhancing surface hydrophobicity; besides, the SH-based functional group of MPTMS passivates the uncoordinated lead at the interface, which effectively reduces the defects at the bottom interface of perovskite and inhibits the nonradiative recombination at the interface. Moreover, the energy level between the NiOx layer and the perovskite layer is better matched. Based on multiple functions of MPTMS modification, the open circuit voltage of the device is obviously improved, and efficient air-processed methylamine-free (MA-free) PSCs are realized with PCE reaching 21.0%. The device still maintains the initial PCE of 85% after 1000 h aging in the glovebox. This work highlights interface modification in air-processed MA-free PSCs to promote the industrialization of PSCs.

Bacterial infections pose a global concern due to high fatality rates, particularly with the rise of drug-resistant bacteria and biofilm formation. There is an urgent need for innovative strategies to combat this issue. A study on chemodynamic therapy (CDT) using nanozymes in conjunction with photothermal therapy (PTT) has displayed potential in addressing drug-resistant bacterial infections. However, the effectiveness of this combined approach is limited by inadequate light absorption. This work suggests the NiOx nanoparticles enriched with oxygen vacancies enhance CDT and PTT to overcome this challenge. The presence of oxygen vacancies in NiOx can reduce the energy gap between its valence band and conduction band, facilitating oxygen adsorption. NiOx has exhibited notable antibacterial properties and complete eradication of biofilms in both laboratory and animal trials. In animal abscess models, NiOx demonstrated antibacterial and anti-inflammatory effects in the initial stages, while also promoting wound healing and tissue regeneration by influencing immune factors and encouraging collagen deposition and neovascularization. With positive biosafety and biocompatibility profiles, the oxygen vacancy-enhanced CDT and PTT therapy proposed in this article hold promise for effective sterilization, deep biofilm removal, and treatment of infections caused by drug-resistant bacteria. STATEMENT OF SIGNIFICANCE: This study constructs oxygen vacancies NiOx nanoparticles (NiOx NPs) to improve the efficacy of photothermal therapy and chemodynamic therapy. The presence of oxygen vacancies in NiOx NPs helps bridge the energy gap between its valence band and conduction band, facilitating oxygen adsorption and improving catalytic efficiency. In both in vivo and in vitro antibacterial experiments, NiOx NPs demonstrate effective antibacterial and anti-inflammatory properties. Furthermore, it aids in wound healing and tissue regeneration by modulating immune factors, collagen deposition, and angiogenesis. This approach presents a promising collaborative strategy for utilizing nickel-based defective nanomaterials in combating deep drug-resistant bacterial infections.

BACKGROUND:  Multidrug-resistant (MDR) bacteria are widely acknowledged as a significant and pressing public health concern. Tribulus terrestris has been used as a health tonic in traditional medicine since ancient Vedic times. It was also utilized to synthesize small, well-dispersed metal nanoparticles (NPs). The biosynthesized nickel oxide nanoparticles (NiO-NPs) have a broad spectrum of biomedical uses.
OBJECTIVE:  The objective of the research was to utilize a green synthesis method to synthesize NiO-NPs using Tribulus terrestris, subsequently characterize, and this study aimed to assess the antioxidant and antibacterial effectiveness of these NPs against wound isolates that are resistant to multiple drugs.
METHODS:  The synthesis of NiO-NPs was achieved through the titration method, which is a green synthesis approach, and it was characterized by using techniques such as ultraviolet-visible spectroscopy (UV), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, and energy dispersive X-ray (EDX). The antioxidant activity of the NPs was evaluated using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, and antibacterial activity was done using the agar well diffusion method. IBM SPSS Statistics for Windows, Version 21 (Released 2012; IBM Corp., Armonk, New York, United States) is used for statistical analysis.
RESULTS:  The biosynthesized NiO-NPs exhibited a color change from dark brown to dark green, indicating the successful reduction of the NPs. UV analysis peaks were observed at 310-350 nm, while FT-IR analysis showed the peaks at various wavelengths such as 629.31cm-1 (halo compound; C-Br stretching), 957.80cm-1(aromatic phosphates; P-O-C stretch), 1004.65cm-1 (aliphatic phosphates; P-O-C stretch), 1094.93cm-1 (organic siloxane or silicone; Si-O-Si), 1328.38cm-1 (dialkyl/aryl sulfones), 1604.88cm-1 (open-chain azo-N=N-), 2928.68cm-1 (methylene C-H asym/sym stretch), 3268.65cm-1 (normal polymeric \"OH\" stretch). The crystallinity of the NPs was determined to be 24.7%, while the remaining 75.6% exhibited an amorphous structure. The SEM image revealed a spherically agglomerated structure of the nano-ranged size NiO-NPs. The EDX analysis indicated the presence of elemental compositions Ni (7.4%), O (39.4%), and C (53.3%) in the biosynthesized NiO-NPs. These NPs demonstrated significant antibacterial activity against Pseudomonas aeruginosa and Klebsiella pneumoniae, moderate antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA), and the lowest antibacterial activity against Enterococcus faecalis.
CONCLUSIONS:  Our in vitro results demonstrate that the biosynthesized NiO-NPs exhibit significant antioxidant and antibacterial activity. These NPs can be used as a future antimicrobial medication, particularly against MDR clinical wound isolates of K. pneumoniae, P. aeruginosa, and MRSA.

In this study, we synthesize nanostructured nickel oxide (NiO) and doped cobalt (Co) by combining nickel(II) chloride hexahydrate (NiCl2.6H2O) and sodium hydroxide (NaOH) as initial substances. We analyzed the characteristics of the product nanostructures, including their structure, optical properties, and magnetic properties, using various techniques such as x-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet absorption spectroscopy (UV-Vis), Fourier transform infrared (FTIR) spectroscopy, and vibrating sample magnetometers (VSM). The NiO nanoparticles doped with Co showed photocatalytic activity in degrading methylene blue (MB) dye in aqueous solutions. We calculated the degradation efficiencies by analyzing the UV-Vis absorption spectra at the dye\'s absorption wavelength of 664 nm. It was observed that the NiO-doped Co nanoparticles facilitated enhanced recombination and migration of active elements, which led to more effective degradation of organic dyes during photocatalysis. We also assessed the electrochemical properties of the materials using cyclic voltammetry (CV) and impedance spectroscopy in a 1 mol% NaOH solution. The NiO-modified electrode exhibited poor voltammogram performance due to insufficient contact between nanoparticles and the electrolyte solution. In contrast, the uncapped NiO\'s oxidation and reduction cyclic voltammograms displayed redox peaks at 0.36 and 0.30 V, respectively.

The number of pollutants released into freshwater and marine environments has increased due to the widespread use of nanoparticles. Nickel oxide nanoparticles (NiO-NPs) were tested for genotoxicity in fish fingerlings of the species Ctenopharyngodon idella. For 7, 14, and 21 days, fingerlings were exposed to NiO-NPs with each increasing concentrations of 2.25 mg/L, 4.50 mg/L, and 6.75 mg/L, respectively. The micronuclei assay and comet assay were used to evaluate the DNA damage. The experiment revealed that with the increase in nanoparticle concentration and exposure duration, the level of DNA damage also increased. The experiment resulted to be time and dose dependent, and the damage was found as follows: 6.75 mg/L > 4.50 mg/L > 2.25 mg/L against each exposure period. In terms of comet assay, the results showed that after 7 days, the level of DNA damage in all the concentrations was highly significant (P < 0.001). Increased DNA damage was calculated at the higher administered dose of 6.75 mg/L for 21 days of exposition, followed by 14 and 7 days, respectively. The second high toxic effect was observed in the fish blood at the exposure concentration of 4.50 mg/L for 21 days, followed by 14 and 7 days, respectively. The micronuclei induction in the nanoparticle\'s administered blood could be detected only for a 7-day exposition period. Whereas for the exposed duration of 14 and 21 days, the entire red blood cells of the grass carp were completely destroyed demonstrating the ability of the nanoparticles to cause anomalies in aquatic life.

Tailoring the omnidirectional conductivity networks in nickel oxide-based electrodes is important for ensuring their long lifespan, stability, high capacity, and high-rate capability. In this study, nickel metal nanoparticles and a three-dimensional nitrogen-doped carbon matrix were used to embellish the nickel oxide composite NiO-Ni/N-C via simplified hard templating. When a porous nitrogen-doped carbon matrix is present, a rapid pathway would be established for charging and discharging the electrons and lithium ions in a lithium-ion battery, thereby alleviating the volumetric expansion of the NiO nanoparticles during the operation of the battery. Moreover, the Ni0 ions added to serve as active sites to improve the capacity of the NiO-based electrodes and strengthen their conductivities. The multielement-effects of the optimal NiO-Ni/N-C electrode leads it to exhibit a capacity of 1310.8 mAh g-1 at 0.1 A g-1 for 120 loops and a rate capability of 441.5 mAh g-1 at 20.0 A g-1. Kinetic analysis of the prepared electrodes proved their ultrafast ionic and electronic conductivities. This strategy of hard templating reduces the number of routes required for preparing different types of electrodes, including NiO-based electrodes, and improves their electrochemical performance to enable their use in energy storage applications.