Creating high-performance gas sensors for heptanal detection at room temperature demands the development of sensing materials that incorporate distinct spatial configurations, functional components, and active surfaces. In this study, we employed a straightforward method combining hydrothermal strategy with ultrasonic processing to produce mesoporous graphene quantum dots/bismuth antimonate (GQDs/BiSbO4) with nanorod cluster forms. The BiSbO4 was incorporated with appropriate contents of GQDs resulting in significantly improved attributes such as heightened sensitivity (59.6@30 ppm), a lower threshold for detection (356 ppb), and quicker period for response (40 s). A synergistic mechanism that leverages the inherent advantages of BiSbO4 was proposed, while its distinctive mesoporous hollow cubic structure, the presence of oxygen vacancies, and the catalytic enhancement provided by GQDs lead to a marked improvement in heptanal detection. This work introduces a straightforward and effective method for crafting sophisticated micro-nanostructures that optimize spatial design, functionality, and active mesoporous surfaces, showing great promise for heptanal sensing applications.

The high-rate nitrogen removal in a continuous biofilter anammox reactor (CBAR) was investigated to treat low-concentration nitrogen wastewater. Shortening hydraulic retention time (HRT) gradually could restart CBAR and accumulate anammox bacteria effectively in the reactor, where the carmine anammox granular sludge and biofilm were coexisted well. It spent 21 days to restart CBAR completely after it had been idle for 116 days. Meanwhile, the total nitrogen removal rate remained stable at 86.42% accompanied with a total biomass concentration of 26.02 g-SS/L in 0 ~ 20 cm zone under nitrogen loading rate of 4.25 ± 0.10 kg-N/(m3·day), HRT of 20 min and 25 ℃. In addition, the specific anammox activity of biomass exceeded 0.28 g-N/(g-VSS·day) in 0 ~ 20 cm zone, which was related with a high relative abundance of Candidatus Brocadia (>30%) in the same zone. Thus, it is a feasible approach to adopt CBAR to treat low-concentration nitrogen wastewater efficiently.

In order to achieve continuous industrial production of astaxanthin in Xanthophyllomyces dendrorhous, a moderate temperature (25-37°C) fermentation process was needed. In this study, a two-step process with a 20°C pre-culture for 18 h and a 30°C culture for 30 h was performed to achieve the astaxanthin yields of 116.42 μg g-1 dry cell weight, which was lower than that in the normal process (20°C, 96 h). However, cell yield (YX/S) and product yield (YP/S) showed no significant differences between the two processes, suggesting that moderate temperature did not affect the productivity of astaxanthin. The transcriptional levels of genes involved in astaxanthin synthesis were compared in different culture times and a negative correlation between temperature and expression of carotenogenic genes was found. This work provided a potential method for continuous production of astaxanthin using X. dendrorhous at moderate temperature throughout the year.

The study explored the potential of an up-flow sulfate reducing fluidized-bed membrane bioreactor (SR-FMBR) for biogenic sulfide generation at room temperature together with evaluation of filtration and fouling characteristics developed under various operational conditions. The SR-FMBR was tested at different COD/sulfate (mg/mg) ratios for a total of 127 days, initially at 35 °C and then at 23 °C. SR-FMBR was able to achieve COD oxidation and sulfate reduction efficiencies up to 98%, and allowed for biogenic sulfide generation up to 600 mg/L (97% of theoretical value) at room temperature. Alkalinity was generated as a result of sulfate reduction and averaged around 1900 mgCaCO3/L in the permeate. Hence, starting the bioreactor operation at 35 °C and then decreasing it to 23 °C did not adversely affect the process performance. High filtration fluxes up to 9.3 L/m2/h (LMH) could be maintained at employed hydraulic retention times between 24 h and 6 h. Observing relatively high filtration performance was due to keeping a high fraction of biomass attached to the carrier material, which decreased the cake formation potential on the membrane surface compared to conventional MBR operation. The SR-FMBR performance may further be tested for heavy metal removal under sulfidogenic conditions for acid mine drainage treatment.

A lab-scale anaerobic baffled biofilm reactor (ABBR) was used as a novel reactor to start up Anammox process at a moderate temperature around 20 °C and an innovative filling module was adopted as support material. Quick start-up of Anammox process from the aerobic activated sludge was achieved after 47 days operation. The max nitrogen loading rate and nitrogen removing rate attained 1.00 kg N m-3 d-1 and 0.90 kg N m-3 d-1 after 161 days operation. Scanning electron microscope photographs showed that the structure as well as the states of the micro-aggregates (micro-aggregates sticking on a non-woven fiber, entangling non-woven fibers and enwrapped by non-woven fibers) enhanced biomass retention for Anammox bacteria. Microbial community analysis showed that Anammox bacteria were effectively enriched with Candidatus Brocadia, Candidatus Jettenia and Candidatus Kuenenia being the main Anammox species in the mature biofilms. This contributed to the excellent Anammox operation performance at the moderate temperature.

To develop proton-conducting materials under low-humidity conditions and at moderate working temperature still remains challenging for fuel-cell technology. Here, a new type of proton-conducting material, EIMS-HTFSA@MIL, which was prepared by impregnating the binary ionic liquid, EIMS-HTFSA (EIMS=1-(1-ethyl-3-imidazolium)propane-3-sulfonate; HTFSA=N,N-bis(trifluoromethanesulfonyl)amide), into a mesoporous metal-organic framework, MIL-101 ([Cr3 F(H2 O)2 O(BDC)3 ⋅n H2 O] (n≈0.25, BDC=1,4-benzenedicarboxylate)) is reported. By taking advantage of the ionic-liquid properties, such as high thermal stability, non-volatility, non-flammability, and low corrosivity, EIMS-HTFSA@MIL shows potential application as a safe electrolyte in proton conduction above 100 °C.