An increasing demand for additively manufactured polymer composites with optimized mechanical properties is manifesting in different industries such as aerospace, biomedical, and automotive. Laser sintering (LS) is an additive manufacturing method that has the potential to produce reinforced polymers, which can meet the stringent requirements of these industries. For the development of a commercially viable LS nylon-based composite material, previous research studies worldwide have focused on adding glass beads to the powder material with the goal to produce fully dense parts with properties more representative of injection molded (IM) thermoplastic composites. This led to the development of a commercially available glass bead-filled polyamide 12 (PA12) powder. Although this powder has been on the market for quite a while, an in-depth comparison of the mechanical behavior of laser sintered versus IM glass bead-filled PA12 is lacking. In this study, laser-sintered glass bead-filled PA12 samples were built in different orientations and compared to IM counterparts. After sample production, the mechanical performance of the produced LS and IM parts was tested and compared to evaluate the quasistatic and dynamic mechanical performance and failure mechanisms at different load levels. In addition, the glass bead-filled PA12 properties were also compared to those of standard (unfilled) LS PA12 to assess whether glass beads actually improve the mechanical performance and fatigue lifetime of the final LS samples, as suggested in literature. Results in this work present and explain the increased stiffness but decreased fatigue life of glass bead-filled polyamide parts made by LS and IM. This research can be regarded as a \"benchmark\" study, in which samples produced from commercially available, filled and unfilled, PA12 powder grades are compared for both LS and conventional production techniques.

Laser sintering, known as powder bed fusion-laser beam (PBF-LB), offers promising potential for the fabrication of patient-specific drugs. The aim of this study was to provide an insight into the PBF-LB process with regard to the process parameters, in particular the laser hatching distance, and its influence on the properties of zolpidem tartrate (ZT) tablets. PHARMACOAT® 603 was used as the polymer, while Candurin® Gold Sheen and AEROSIL® 200 were added to facilitate 3D printing. The particle size distribution of the powder blend showed that the layer height should be set to 100 µm, while the laser hatching distance was varied in five different steps (50, 100, 150, 200 and 250 µm), keeping the temperature and laser scanning speed constant. Increasing the laser hatching distance and decreasing the laser energy input led to a decrease in the colour intensity, mass, density and hardness of the ZT tablets, while the disintegration and dissolution rate were faster due to the more fragile bonds between the particles. The laser hatching distance also influenced the ZT dosage, indicating the importance of this process parameter in the production of presonalized drugs. The absence of drug-polymer interactions and the amorphization of the ZT were confirmed.

Laser sintering (LS) of polyamide 12 (PA12) is increasingly being adopted for industrial production of end-use parts, yet the complexity of this process coupled with the lack of organized, rigorous, publicly available process-structure-physical property datasets exposes manufacturers and customers to risks of unacceptably poor part quality and high costs. Although an extensive scientific literature has been developed to address some of these concerns, results are distributed among numerous reports based on different machines, materials, process parameters, and users. In this study, a single commercially important LS PA12 feedstock has been processed along four build dimensions of a modern production LS machine, characterized by a wide range of physical techniques, and compared to the same material formed by conventional melt processing. Results are discussed in the context of the literature, offering novel insights including distributions of particle size and shape, localization of semicrystalline phase changes due to LS processing, effect of chemical aging on melt viscosity, porosity orientation relative to LS build axes, and microstructural effects on tensile properties and failure mechanisms. The resulting datasets will be made publicly available to modelers and practitioners for the purpose of improving certifiability and repeatability of end-use parts manufactured by LS.

The digital transformation has revolutionized various sectors, including dentistry. Dentistry has emerged as a pioneer in embracing digital technologies, leading to advancements in surgical and prosthetic oral healthcare. Immediate loading for full-arch edentulous dental implants, once debated, is now widely accepted. This case report describes a 74-year-old patient with dental mobility and significant bone loss who was rehabilitated using a Toronto Bridge protocol on four dental implants with immediate loading. Digital planning, surgical guides, 3D printing, and precision techniques were employed. The surgery involved implant placement and prosthetic procedures. The patient reported minimal post-operative discomfort, and after four months, the definitive prosthesis was successfully placed. This case demonstrates the efficacy of immediate loading in complex dental scenarios with digital innovation, resulting in improved patient outcomes. The full digital workflow, including 3D printing and the use of modern materials, enhances the efficiency and predictability of oral rehabilitation, marking a transformative era in dental care. The integration of digital technology in all phases of treatment, from diagnosis to finalization, makes this approach safer, reliable, and efficient, thereby benefiting both patients and clinicians.

BACKGROUND: Exploring the integration of 3D-printing technology in space maintainer (SM) manufacturing could offer innovative solutions and insights for enhancing SMs.
OBJECTIVE: To compare the clinical success, retention, and periodontal effect of traditional band-loop (TBL) SMs with 3D-printed SMs.
METHODS: Seventy children (mean age: 6.99 ± 1.18) were divided into two groups. Laser sintering (LS) group (n = 34): Patients were scanned with an intraoral scanner. SMs were produced with LS 3D-printing method from a titanium-based metal powder. T group (n = 36): Impressions were taken with alginate. SMs were produced by adjusting the bands and soldering the wires on the model. The retention and effects on oral hygiene of the SMs were evaluated at the sixth month. Preference for impression technique was assessed by a five-question survey.
RESULTS: Thirty-eight percent of T SMs and 66% of LS SMs failed (p = .007). The mean survival time was significantly higher in the T group (p = .035). No difference was found between the initial and control full-mouth Gingival Index (GI) and Plaque Index (PI) values of the two groups. Both groups had increased GI/PI values in abutment teeth. Patients in the LS group interpreted their impression experience more positively.
CONCLUSIONS: It is important to provide oral hygiene education before applying fixed SMs and utilize more digital workflow in paediatric dentistry.

The connection between laser-based material processing and additive manufacturing is quite deeply rooted. In fact, the spark that started the field of additive manufacturing is the idea that two intersecting laser beams can selectively solidify a vat of resin. Ever since, laser has been accompanying the field of additive manufacturing, with its repertoire expanded from processing only photopolymer resin to virtually any material, allowing liberating customizability. As a result, additive manufacturing is expected to take an even more prominent role in the global supply chain in years to come. Herein, an overview of laser-based selective material processing is presented from various aspects: the physics of laser-material interactions, the materials currently used in additive manufacturing processes, the system configurations that enable laser-based additive manufacturing, and various functional applications of next-generation additive manufacturing. Additionally, current challenges and prospects of laser-based additive manufacturing are discussed.

OBJECTIVE: The aim of this study was to evaluate the impact of the print orientation of direct metal laser sintering (DMLS) posts and cores on the fracture resistance and failure patterns of endodontically treated mandibular premolar teeth.
METHODS: Sixty intact human mandibular premolars were endodontically treated. The teeth were then randomly divided into four groups (n = 15). Cobalt-chromium (Co-Cr) metal posts were fabricated by traditional casting (Group C), and DMLS method in 0-, 45-, and 90-degree print orientations (Group DMLS 0, Group DMLS 45, and Group DMLS 90). The posts and cores were cemented with composite resin cement and subjected to compression test at a crosshead speed of 1 mm/min. Data was analyzed by using one-way analysis of variance ANOVA and multiple comparison post hoc Tukey tests (α = 0.05). Specimens were viewed under a stereo microscope with x20 magnification to evaluate the fracture types.
RESULTS: No significant differences were found among the groups tested in terms of fracture resistance (p > 0.05). Group C and Group DMLS 0 group exhibited similar fracture patterns.
CONCLUSIONS: It is possible to produce post and core restorations with the DMLS technique and use them clinically.  Print orientation did not influence the fracture resistance. However, fracture patterns were different. Group C outperformed all DMLS groups in terms of fracture patterns.

In the laser sintering (LS) printing process, a printed part is formed by sintering layer-by-layer on the powder bed. Thus, it is necessary to consider the dimensional accuracy of the laser-sintered powder bed as an important evaluation index. In this paper, a generalized powder bed-size accuracy compensation model is proposed for non-crystalline thermoplastic polymer materials. Taking polyethersulfone (PES) material as an example, the main factors influencing powder bed dimensional accuracy during LS printing are modeled and analyzed experimentally in this study, including four important factors: laser reference deviation, temperature deviation, density deviation, and secondary sintering deviation. In this study, CX_A200 LS equipment is used for prototyping and verification, a 3D scanning method is used to measure the printed parts, and the measurement results are digitally compared and analyzed. On this basis, the relationship of each influencing factor in the proposed compensation model is determined experimentally, and the experimental results demonstrate that the proposed compensation model is approximately 95% effective in terms of correcting the deviation of powder bed dimensional accuracy.

Conductive silicone elastomer carbon nanotubes (CNTs) composites possess potential applications in a variety of fields, including electronic skin, wearable electronics, and human motion detection. Based on a novel self-made covalent adaptable network (CANs) of polydimethylsiloxane (PDMS) containg dynamic steric-hindrance pyrazole urea bond (PDMS-CANs), CNTs wrapped PDMS-CANs (CNTs@PDMS-CANs) powders were prepared by a liquid phase adsorption and deposition, and were successfully used for selective laser sintering (SLS) three-dimensional printing. SLS-printed PDMS-CANs/CNTs nanocomposites possess high electrical conductivity and low percolation threshold as SLS is one kind of quasi-static processing, which leads to the formation of conductive segregated CNTs network by using the PDMS powders with special CNTs wrapped structure. The introduction of dynamic pyrazole urea bond endows the materials self-healing capability under electrothermal and photothermal stimulus. In addition, due to the resistance difference of the damaged and intact areas, crack diagnosing can be realized by infrared thermograph under electricity. In an application demonstration in strain sensor, the composite exhibits a regular cyclic electrical resistance change at cyclic compression and bending, indicating a relative high reliability.

Refractory metals offer exceptional benefits for high temperature electronics including high-temperature resistance, corrosion resistance and excellent mechanical strength, while their high melting temperature and poor processibility poses challenges to manufacturing. Here this work reports a direct ink writing and tar-mediated laser sintering (DIW-TMLS) technique to fabricate three-dimensional (3D) refractory metal devices for high temperature applications. Metallic inks with high viscosity and enhanced light absorbance are designed by utilizing coal tar as binder. The printed patterns are sintered into oxidation-free porous metallic structures using a low-power (<10 W) laser in ambient environment, and 3D freestanding architectures can be rapidly fabricated by one step. Several applications are presented, including a fractal pattern-based strain gauge, an electrically small antenna (ESA) patterned on a hemisphere, and a wireless temperature sensor that can work up to 350 °C and withstand burning flames. The DIW-TMLS technique paves a viable route for rapid patterning of various metal materials with wide applicability, high flexibility, and 3D conformability, expanding the possibilities of harsh environment sensors.