Although advancements in CAD/CAM technology allow for more personalized treatments, it is not clear how modifications in the CAD/CAM milling process could affect the restoration surface conditions and their mechanical behavior. The objective of this study was to evaluate the effect of different CAD/CAM milling protocols on the topography and fracture behavior of zirconia monolithic crowns (3Y-PSZ) subjected to a chewing simulation. Monolithic 3Y-PSZ premolar crowns were milled using three protocols (n = 13) (slow (S), normal (N), and fast (F)). Crowns were cemented on a dentin analog abutment and subjected to mechanical aging (200 N, 2 Hz, 1,500,000 cycles, 37 °C water). Surviving crowns were subjected to compressive load test and analyzed using fractography. Fracture load data were analyzed with two-parameter Weibull analysis. The surface topography of the crowns was examined with a stereomicroscope and a 3D non-contact profiler. All crowns survived the chewing simulation. Crowns milled using the F protocol had the greatest characteristic fracture load, while crowns produced with the S protocol showed high Weibull modulus. Groups N and S had a more uniform surface and detailed occlusal anatomy than group F. The CAD/CAM milling protocol affected the topography and mechanical behavior of 3Y-PSZ monolithic crowns.

OBJECTIVE: Familial isolated hypoparathyroidism is a rare genetic disorder due to no or low production of the parathyroid hormone, disturbing calcium and phosphate regulation. The resulting hypocalcemia may lead to dental abnormalities, such as enamel hypoplasia. The aim of this paper was to describe the full-mouth rehabilitation of a 15-year-old girl with chronic hypocalcemia due to a rare congenital hypoparathyroidism.
METHODS: In this patient, in the young adult dentition, conservative care was preferred. Onlays or stainless-steel crowns were performed on the posterior teeth, and direct or indirect (overlays and veneerlays) were performed on the maxillary premolars, canines, and incisors, using a digital wax-up. The mandibular incisors were bleached. The treatment clearly improved the patient\'s oral quality of life, with fewer sensitivities, better chewing, and aesthetic satisfaction. The difficulties were the regular monitoring and the limited compliance of the patient.
CONCLUSIONS: Despite no clinical feedback in the literature, generalized hypomineralized/hypoplastic teeth due to hypoparathyroidism in a young patient can be treated as amelogenesis imperfecta (generalized enamel defects) with a conservative approach for medium-term satisfactory results.
CONCLUSIONS: This study provides new insights into the management of enamel hypoplasia caused by familial isolated hypoparathyroidism, helping to improve patient outcomes in similar cases.

The concept of bilateral cantilevers on a single central implant (T-design) for three-unit implant-supported fixed dental prostheses (ISFDPs) has not been explored nor tested. This technical hypothesis aimed to explore the feasibility of such an approach as a cost-effective alternative to conventional treatments. Careful considerations regarding implant diameter, length, ideal position, occlusal scheme, and bone remodeling are essential to ensure adequate support, stability, and prevention of complications. In this proof of concept, we present a preliminary case with this novel design to replace missing posterior teeth in a patient with narrow bone conditions. In addition, a series of planned investigations and preliminary results, including preclinical studies, are presented to illustrate our concept and its potential clinical implications. Clinically, after two-year follow-up, healthy and stable peri-implant tissues around the ISFDP exemplarily demonstrated excellent stability, functionality, and comfort, which is supported by acceptable fracture resistance data in vitro, suggesting indeed the practical potential and suitability. Thus, we claim that such a treatment modality has the at least theoretical potential to revolutionize implant dentistry by providing innovative and cost-effective treatment options for patients with partial ISFDPs in very specific cases. Of course, further research and evaluations are necessary to validate the clinical implications of this innovative hypothesis. Implementing the 3-on-1 T-bridge approach in partial ISFDPs could offer a promising alternative to traditional methods. If proven successful, this technique may lead to significant advancements in clinical practice, providing a less invasive cost-effective treatment option.

OBJECTIVE: To validate the reproducibility and inter/intra-observer variability of the Pink Esthetic Score/White Esthetic Score (PES/WES) of single tooth-supported prostheses in the maxillary esthetic zone (13-23).
METHODS: Forty-five patients were randomly assigned to one of the three treatment options (15 patients per group) receiving each one a different crown type: Porcelain fused to metal (PFM), monolithic zirconia, and lithium disilicate. Eight observers from each of four different specialties (Prosthodontists, Orthodontists, Periodontists, and Oral Surgeons) were recruited and assessed twice and four weeks apart (i.e., T1 and T2) 45 photographs of the single tooth-supported prosthesis using PES/WES and compared them with contralateral teeth.
RESULTS: According to the ANOVA and post hoc tests, the zirconia crown type obtained the highest mean score by all observers, with a mean value of 16.70 ± 2.94. The prosthodontists and oral surgeons assigned the lowest mean score to PFM crowns, 13.03 ± 3.47 and 13.80 ± 3.17, respectively. Notably, the prosthodontists awarded the highest scores, specifically 17.50 ± 2.81 for the zirconia crowns. Intraobserver agreement was calculated utilizing the paired t-test. Pairwise comparisons between observers of different specialties revealed significant intraobserver agreement. Interclass correlation coefficient (ICC) scores were statistically significant among four specialties. No difference was detected concerning the interobserver agreement.
CONCLUSIONS: The PES/WES index remains consistent across various observers from different specializations, yielding uniform results in the overall esthetic evaluation. Consequently, in light of the presented preliminary positive results, its use might also be considered for the esthetic assessment of single-tooth-supported prostheses.
CONCLUSIONS: The PES/WES index may be employed clinically to evaluate single tooth-supported prostheses as it emerged as a reproducible esthetic scoring system.

BACKGROUND: Over the years, implant therapy has been a commonly used treatment option for individuals who are partially or totally edentulous, with a long-term success rate of over 90%. With significant advancements in biomaterials and technology, implant dentistry can now conduct prosthetic rehabilitations in the majority of patients catering to all types of needs. However, in order to meet the demands of a patient base that is always growing, new trends in implantology are emerging in recent years that are focused on minimally invasive surgery and financial sustainability. In certain clinical scenarios, connecting teeth and implants to support fixed partial prosthesis (FPPs) may be a predictable and workable course of treatment.
METHODS: 22 patients were selected for this study who had tooth and implant supported prosthesis placed as a final restoration. Out of these 22 patients; 12 were male and 10 were female patients. Implants were placed following proper protocol and if grafting procedures were required they were carried out. A second stage surgical procedure was carried out and delayed loading protocols were followed. The statistical analysis was done using the IBM SPSS 24.0, Chicago, USA. The survival of the implants and teeth were measured by the Kaplan Meier survival scale. Bone loss was assessed at baseline(upon loading), 12 months and 24 months.
RESULTS: The implant survival rate was measured at 6 months, 12 months, 18 months and 24 months. At 24 months, one implant showed failure, so the survival rate of the implants were 95.4%. Bone loss of 1 mm was seen around one implant at 12 months. Bone loss of 1 and 2 mm was present around two implants and one implant respectively at 24 months.
CONCLUSIONS: From the results of this study, we can conclude that tooth implant supported prosthesis show very good survival when used in rehabilitation cases.

An abutment having edentulous space on both sides is referred to as a pier abutment. The rehabilitation of a patient whose primary concern when they first came to the hospital was missing teeth is discussed in this case report. When using a pier abutment for a fixed dental prosthesis, there is a problem with fulcrum and torqueing pressures at the intermediate abutment. Forces on the pier abutment may become localized as a result of using a rigid connector. It has been suggested that non-rigid connectors be used to overcome this. Here, using a non-rigid connector as a stress breaker resulted in less stress being placed on the prosthetic assembly and abutment. This article offers a clinical case report that details the use of a non-rigid connector in a pier abutment scenario for rehabilitation.

BACKGROUND: The objective of the study was to retrospectively assess the clinical performance of dental prostheses, single crowns, and three-unit bridges to identify clinical biological and mechanical complications in the Ha\'il province of Saudi Arabia.
METHODS: The study was conducted between March 2021 to October 2021 and included 421 patients who underwent crown and tooth-supported fixed partial denture (FPD) procedures at the Dental Polyclinics Center in the Ha\'il region of Saudi Arabia from 2010-2020. The planned sampling approach was applied. Patients who underwent crown and FPD placements at the dental center within the scheduled period were identified through clinical assessments. The inclusion criteria were met by patients with three-unit FPDs and a single crown containing a natural contralateral tooth or teeth. A total of six general dentists conducted clinical exams. Patient satisfaction and technical and biological issues were the evaluation criteria for crowns and FPDs. The frequency and percentage of the various characteristics employed in the current investigation were ascertained using cross-tabulation. The Chi-square test was employed to assess the associations between categorical variables, with p-values ≤ 0.05 considered significant.  Results: Marginal integrity was recorded in 332 participants (78.9%), which was satisfactory for the majority of the restoration. The acceptance morphology was present in 252 (59.9%) restorations. The highest rate of the restorations 274 (66.2%) had satisfactory color. In 86 cases (20.4%), there was visible periodontal depth of at least 5 mm. Three hundred and six (72.7%) of the fixed restorations had gingival bleeding connected to them, and 96 (22.8%) teeth had periapical lesions. A total of 311 patients (73.9%) reported they were satisfied with their fixed restorations.
CONCLUSIONS: The technical and biological complications noted in the current study were not higher compared with other studies of crowns and fixed dental prostheses. The majority of patients were satisfied with the restoration.

OBJECTIVE: The aim of this study was to investigate the influence of different convergence angles of abutment teeth and different cement spaces on internal adaptation of anterior fixed dental prostheses (FDPs) fabricated with a computer-aided design-computer-aided manufacturing (CAD-CAM) system.
METHODS: Composite resin FDPs for 99 standardized maxillary central incisors were fabricated according to nine parameters: three total convergence angles (4 [DG4], 12 [DG12], and 20 degrees [DG20]) and three cement space settings (10 [CS10], 50 [CS50], and 90 µm [CS90]). Internal space values were measured with a cement space replica technique. The Kruskal-Wallis and Steel-Dwass tests were used to evaluate differences in the total convergence angles and luting agent spaces, respectively (α = 0.05).
RESULTS: For all three cement spaces tested, the median marginal gap values between abutment teeth and FDPs decreased significantly as the total convergence angle increased (P < 0.05). For the CS10 and CS50 groups, the internal space values at the axial area increased significantly as the total convergence angles increased (P < 0.05).
CONCLUSIONS: Total convergence angles of the abutment teeth and cement spaces affected the marginal and internal adaptation of anterior FDPs fabricated with a CAD-CAM system.

UNASSIGNED: Impression making is one such important clinical step, which is critical in the accurate fitting of resulting prostheses. Impression making itself depends on the type of material and the impression technique used to record the details. Various combinations of material and the technique have been described in the literature.
UNASSIGNED: To evaluate the effect of three different impression techniques on the marginal fit of computer-aided designed/computer-aided manufactured (CAD/CAM) single unit composite fixed dental prostheses (FDP), different consistencies of addition silicone impression material and different tray design were utilized.
UNASSIGNED: Impression of prepared tooth on typodont was made using Matrix impression system, two-step putty wash technique, and individual tooth tray technique. Prosthesis was fabricated using CAD/CAM technology and marginal accuracy was evaluated using scanning electron microscopy (SEM).
UNASSIGNED: In the present study, the matrix impression system resulted in less microgap in both mid-buccal and mid-mesial region, whereas putty wash technique showed very high standard deviation in the interproximal region.
UNASSIGNED: Matrix impression system had the best results at both mid-buccal and mid-mesial position with least marginal discrepancy.
UNASSIGNED: The findings of this study could be used by clinicians to help them choose the viscosity of polyvinylsiloxane material and impression techniques for FDP that will result in high-accuracy impressions and well-fitting prostheses.

OBJECTIVE: Ridge deformities are present in most patients after tooth extraction; these defects make the management of future implant and pontic sites challenging to deal with. The restorative team should be able to diagnose and treat these deformities to allow for successful outcomes. Many approaches have been described to reconstruct pontic sites, each with specific indications. This article describes the different approaches to reconstructing pontic sites and their indications to allow for a proper esthetic and biological environment for future restorations.
METHODS: Depending on the severity of the defect, location, and the esthetic necessity, pontic site enhancement can be done through different approaches, some requiring soft tissue grafting, hard tissue grafting, or both. Understanding the indications of the treatment options is essential to allow the clinician to make the right therapeutic decision and achieve the best possible perio-prosthodontic outcomes.
CONCLUSIONS: An adequate balance between the soft tissue and prosthetics is essential to achieve successful results on implant-supported or tooth-supported fixed dental prostheses (FDPs). Selecting the right approach to treat ridge deformities is necessary to increase treatment success, reduce over-treatment, and create a biologically sound environment for restorations.
CONCLUSIONS: Pontic site enhancement through reconstructive surgery will allow for esthetically pleasing and biologically stable results, allowing restorations to emulate natural structures lost after tooth extraction.