Electric vehicles (EVs) differ significantly from their internal combustion engine (ICE) counterparts, with reduced mechanical parts, Lithium-ion batteries and differences in pedal and transmission control. These differences in vehicle operation, coupled with the proliferation of EVs on our roads, warrant an in-depth investigation into the divergent risk profiles and driving behaviour of EVs, Hybrids (HYB) and ICEs. In this unique study, we analyze a novel telematics dataset of 14,642 vehicles in the Netherlands accompanied by accident claims data. We train a Logistic Regression model to predict the occurrence of driver at-fault claims, where an at-fault claim refers to First and Third Party damages where the driver was at fault. Our results reveal that EV drivers are more exposed to incurring at-fault claims than ICE drivers despite their lower average mileage. Additionally, we investigate the financial implications of these increased at-fault claims likelihoods and have found that EVs experience a 6.7% increase in significant first-party damage costs compared to ICE. When analyzing driver behaviour, we found that EVs and HYBs record fewer harsh acceleration, braking, cornering and speeding events than ICE. However, these reduced harsh events do not translate to reducing claims frequency for EVs. This research finds evidence of a higher frequency of accidents caused by Electric Vehicles. This burden should be considered explicitly by regulators, manufacturers, businesses and the general public when evaluating the cost of transitioning to alternative fuel vehicles.

The global transportation electrification commerce sector is now booming. Stakeholders are paying an increased attention to the integration of electric vehicles and electric buses into  the transportation networks. As a result, there is an urgent need to invest in public charging infrastructure, particularly for fast charging facilities. Consequently, and to complete the portfolio of the green environment, these fast-charging stations (FCSs) are designed using 100% of renewable energy sources (RESs). Thus, this paper proposes an optimization model for the techno-economic assessment of FCSs comprising photovoltaic and wind turbines with various energy storage devices (ESDs). In this regard, the FCS performance is evaluated using flywheels and super capacitors due to their high-power density and charging/discharging cycles and rates. Then, optimal sizing of these distributed generators is attained considering diverse technical and economical key performance indicators. Afterwards, the problem gets more sophisticated by investigating the effect of RES\'s uncertainties on the selection criterion of the FCS\'s components, design and capacity. Eventually, as an effort dedicated to an online energy management approach, a deep learning methodology based on radial basis network (RBN) is implemented, validated, and carried out. In stark contrast to conventional optimization approaches, RBN demonstrates its superiority by obtaining the optimum solutions in a relatively short amount of time.

The rise of electric vehicles (EVs) necessitates an efficient charging infrastructure capable of delivering a refueling experience akin to conventional vehicles. Innovations in Extreme Fast Charging (EFC) offer promising solutions in this regard. By harnessing renewable energy sources and employing sophisticated multiport converters, EFC systems can meet the evolving demands of EV refueling. A single-stage topology simplifies the converter design, focusing on efficient DC-AC conversion, vital for feeding solar power into the grid or charging stations. It provides power factor correction, harmonics filtering, and mitigates power quality issues, ensuring stable and efficient operations. Converters with Maximum Power Point Tracking (MPPT) capability facilitate the efficient integration of solar PV systems in charging stations, ensuring maximum solar energy utilization for EV charging. The ability to operate in different modes allows seamless integration with energy storage systems, storing excess solar energy for use during night-time or peak demand periods, enhancing overall efficiency and reliability. Advanced converters support bidirectional energy flow, enabling EV batteries to discharge back to the grid, aiding grid stability and energy management. However, robust control algorithms are needed to handle dynamic conditions like partial shading more effectively. Our review focuses on integrating renewable energy sources with multiport converters, providing insights into a novel EV charging station framework optimized for EFC topology. We highlight the advantages of multiport non-isolated converters over traditional line frequency transformers, particularly in medium voltage scenarios, offering enhanced efficiency and versatility for EFC applications.

This paper presents a mathematical optimization framework for the strategic placement of quasi-dynamic wireless charging (QWC) stations within road networks to address the charging needs of battery electric buses (BEBs). This study evaluates two scenarios for powering the buses. In the first scenario, a grid-connected system is considered. The optimization aims to minimize annual costs related to capital, operation, and energy losses of the electric bus fleet. This involves determining the optimal locations for QWC stations, the length of power transmitters, and the corresponding battery capacities for the BEBs. Using MATLAB-based optimization tools Casadi and Yalmip, with solvers Bonmin and Fmincon, the optimal configuration includes a 13 kWh battery capacity and a 300 m power transmitter distributed across five bus stop areas. The second scenario employs a chance-constrained optimization approach for an isolated solar photovoltaic (PV) and battery energy storage system (BESS). This system is designed to reliably meet the BEBs\' energy requirements throughout the day, considering different seasonal data (winter, summer, all seasons/year-round). The optimization results for the PV and BESS capacities vary with the seasons: 394.247 kW and 2012.6 kWh using summer data, 1762.1 kW and 2738.2 kWh using winter data, and 1610.8 kW and 2741.9 kWh using year-round data. Additionally, the paper examines the impact of varying bus fleet sizes on the optimal battery size and power transmitter combination using a real-world example of the bus route between Khalifa City and Abu Dhabi Downtown in the UAE. The findings suggest that larger batteries with fewer or no charging stations are more economical for smaller fleets. Conversely, as the fleet size increases, a combination of smaller battery sizes and a greater number (and length) of QWC (power transmitters) becomes more cost-effective. This research offers significant insights into the efficient deployment of QWC stations and the integration of renewable energy and energy storage for sustainable urban electric bus networks. The proposed optimization models provide a systematic approach to designing and operating charging infrastructure, contributing to sustainable urban transportation systems. Moreover, the study highlights the influence of seasonal data on PV system sizing and costs.

High-power converters with significant gains represent established configurations that hold appeal for applications in the industrial and commercial sectors, such as fuel cell electric vehicles (FCEV), energy backup systems, and automotive headlamps. Existing literature predominantly features topologies employing a single-duty ratio. However, this singular approach may not be dependable for operations with high-duty cycles, necessitating the incorporation of additional components to enhance voltage gain. To address this, the current study introduces the concept of time-sharing within the context of a high-gain non-isolated DC-DC converter. This innovative approach achieves substantially higher output voltage gains, approximately 13.33 times that of the input voltage. The analysis of the proposed converter is approached from various perspectives. Finally, it is examined within the MATLAB/Simulink environment, where the theoretical analysis is validated, and an efficiency of 97.4% is achieved.

This research paper introduces the Double Stator (DS) Hybrid Excitation (HE) Halbach Permanent Magnet (HPM) Flux Switching (FS) machine. The machine construction and its optimization specifically designed for electric vehicle (EV)/hybrid electric vehicle (HEV) traction applications are investigated. The optimization using a multi-objective Genetic Algorithm is conducted following a sensitivity analysis-based identification of key optimization parameters and constraints. The finite element results are compared with the performance of a state-of-the-art benchmark FSPM machine having identical PM volume and winding current densities. The proposed design is shown to outperform the benchmark with 16.2% increase in back-electromotive force and 14.7% reduction in cogging torque. Furthermore, the average torque is improved at flux-enhancing operation by 20.8%, and the torque ripple is reduced by 9.9%. Notably, the proposed machine also is capable of flux regulation thereby having the ability to operate in a wide speed range. A detailed explanation of the reasons for the significant improvements in the proposed machine structure is provided to offer a comprehensive understanding of its rationale. These research findings indicate that this innovative DS-HE-HPM-FS machine can enhance the performance of EVs and HEVs.

Transforming an up-to-date vehicle into a measurement system is a rewarding task due to the large number of different sensors in the onboard control and diagnostic systems. These procedures are not performed by a single control unit; it is necessary to share the signal values over a communication network, to which an external device can be connected to record the real traffic. The paper aims to use these recorded data for 1 DOF longitudinal vehicle and powertrain model validation. For repeatability, three city routes are selected: plain road, smaller road grade, and higher road grade in both directions. Therefore, the drivetrain system is tested in a high load range, even with long-term recuperation. The altitude changes are recorded with a DGPS system. By the recorded measurements, the vehicle and the drivetrain model can be calibrated, such as the air drag parameters, the rolling resistances, and the efficiencies of the drivetrain. The validation criteria are defined for speed tracking, and the relative tolerance of the cumulated energy should be below 10%. At the end of the day, a developed model is ready for energetic analysis or control strategy design. The energy balance of the applied cycles is also presented to prove that.

I study battery electric vehicle (BEV) usage and ownership characteristics with fundamental implications for the electrification of passenger transportation. Using data covering the entire BEV population in New York, I quantify BEV mileage and electricity consumption and highlight the important role of vehicle utilization in contributing to real-world pollution damages and their spatial variation. I then study the factors influencing how much BEVs are driven with a focus on estimating the electricity price elasticity of BEV mileage. Understanding how drivers respond to these changes in operating costs may help align the social and private costs of BEV driving and illustrates how electric utilities may affect transportation outcomes in the future. I find a 10% increase in residential electricity prices reduces mileage by 1%, but responsiveness falls as public charging stations-where prices are often decoupled from electricity costs-become available.

The number of individuals wearing cardiac pacemakers is gradually increasing as the population ages and cardiovascular disease becomes highly prevalent. The safety of pacemaker wearers is of significant concern because they must ensure that the device properly functions in various life scenarios. Electric vehicles have become one of the most frequently used travel tools due to the gradual promotion of low-carbon travel policies in various countries. The electromagnetic environment inside the vehicle is highly complex during driving due to the integration of numerous high-power electrical devices inside the vehicle. In order to ensure the safety of this group, the paper takes passengers wearing cardiac pacemakers as the object and the electric vehicle drive motors as the exposure source. Calculation models, with the vehicle body, human body, heart, and cardiac pacemaker, are built. The induced electric field, specific absorption rate, and temperature changes in the passenger\'s body and heart are calculated by using the finite element method. Results show that the maximum value of the induced electric field of the passenger occurs at the ankle of the body, which is 60.3 mV/m. The value of the induced electric field of the heart is greater than that of the human trunk, and the maximum value (283 mV/m) is around the pacemaker electrode. The maximum specific absorption rate of the human body is 1.08 × 10-6 W/kg, and that of heart positioned near the electrode is 2.76 × 10-5 W/kg. In addition, the maximum temperature increases of the human torso, heart, and pacemaker are 0.16 × 10-5 °C, 0.4 × 10-6 °C, and 0.44 × 10-6 °C within 30 min, respectively. Accordingly, the induced electric field, specific absorption rate, and temperature rise in the human body and heart are less than the safety limits specified in the ICNIRP. The electric field intensity at the pacemaker electrode and the temperature rise of the pacemaker meet the requirements of the medical device standards of ICNIRP and ISO 14708-2. Consequently, the electromagnetic radiation from the motor operation in the electric vehicle does not pose a safety risk to the health of passengers wearing cardiac pacemakers in this paper. This study also contributes to advancing research on the electromagnetic environment of electric vehicles and provides guidance for ensuring the safe travel of individuals wearing cardiac pacemakers.

Taiwan has pledged to achieve net-zero carbon emissions by 2050, but the current extent of carbon sinks in Taiwan remains unclear. Therefore, this study aims to first review the existing nature-based carbon sinks on land and in the oceans around Taiwan. Subsequently, we suggest potential strategies to reduce CO2 emissions and propose carbon dioxide removal methods (CDRs). The natural carbon sinks by forests, sediments, and oceans in and around Taiwan are approximately 21.5, 42.1, and 96.8 Mt-CO2 y-1, respectively, which is significantly less than Taiwan\'s CO2 emissions (280 Mt-CO2 y-1). Taiwan must consider decarbonization strategies like using electric vehicles, renewable energy, and hydrogen energy by formulating enabling policies. Besides more precisely assessing both terrestrial and marine carbon sinks, Taiwan should develop novel CDRs such as bioenergy with carbon capture and storage, afforestation, reforestation, biochar, seaweed cultivation, and ocean alkalinity enhancement, to reach carbon neutrality by 2050.