OBJECTIVE: To investigate the prevalence and severity of erosive tooth wear (ETW) and evaluate the determinants of ETW among adolescents and adults in Poland.
METHODS: The study covered three age groups of patients: 15 years old, 18 years old, and adults aged 35-44 years. Calibrated examiners measured ETW according to the Basic Erosive Wear Examination (BEWE) scoring system in 6091 patients. The clinical examination of patients was preceded by a socio-medical study based on a questionnaire consisting of items identifying potential risk factors for ETW.
RESULTS: In all age groups, erosive lesions were most common in the form of initial enamel damage; more advanced lesions (BEWE 2 and 3) were rarely observed among 15-year-olds, while in the group of older adolescents and adults, the percentages were 13% and 20%, respectively. Acidic diet, gender, level of education, and medical conditions were statistically significantly associated with ETW in the examined population. The analysis showed that, depending on age, multiple and statistically significant risk factors for ETW become most apparent in the 35-44 age group, especially with regard to general health. This suggests that the long-term impact of factors and their cumulative effects are critical to the development of ETW.
CONCLUSIONS: This is the first large, representative study of ETW in Central and Eastern Europe among adolescents and adults, which indicates the relatively rare occurrence and severity of erosive lesions. The present findings support other longitudinal studies supporting the use of the BEWE system as a valuable standard for assessing erosive lesions and related risk factors among different populations at different ages.

OBJECTIVE: To compare the prevention of enamel erosion and discolouring effect with a single and two weekly topical applications of silver diamine fluoride (SDF) solution.
METHODS: Human enamel blocks were divided into four groups. Group 1 (SDF2) received two weekly applications of SDF solution (Advantage Arrest: 260,000 ppm Ag, 44,300 ppm F, pH 9.1). Group 2 (SDF1) received a single application of SDF solution. Group 3 (SNF, Positive Control) received daily application of stannous-chloride/amine-fluoride/sodium-fluoride solution (Elmex® Enamel professional: 800 ppm Sn(II), 500 ppm F, pH 4.5). Group 4 (DW, Negative Control) received daily application of deionised water. The treated blocks were subjected to a 14-day erosive challenge. Crystal characteristics, elemental composition, surface morphology, percentage of surface microhardness loss (%SMHL), surface loss, and total colour change (ΔE) of the blocks were investigated using X-ray diffraction (XRD), energy-dispersive spectrometry (EDS) and scanning electron microscopy (SEM), Vickers\' hardness testing, non-contact profilometry, and digital spectrophotometry, respectively.
RESULTS: XRD and EDS revealed precipitates of silver for SDF2 and SDF1 and tin for SNF. SEM showed prominent etched enamel pattern on DW than the other three groups. The%SMHL (%) of SDF2, SDF1, SNF, and DW were 26.6 ± 2.9, 33.6 ± 2.8, 38.9 ± 2.9, and 50.5 ± 2.8 (SDF2SDF1=SNF>DW, p < 0.05).
CONCLUSIONS: Two weekly applications was more effective than a single application of SDF in preventing enamel erosion, though it caused more discolouration.
CONCLUSIONS: Topical application of 38 % SDF with two weekly applications protocol is effective in preventing enamel erosion.

UNASSIGNED: The escalating prevalence of noncarious tooth wear stands as a critical concern in the backdrop of evolving lifestyles and dietary patterns. Dental erosion, a progressive condition induced by both endogenous and exogenous acidic influences, directly impacts enamel integrity, resulting in surface loss. The contemporary surge in carbonated beverage consumption further exacerbates this erosive milieu, underscoring the urgency for dental practitioners to adopt meticulous treatment strategies. Existing literature underscores a noteworthy 94% reduction in tooth erosion risk for individuals abstaining from sweetened soft beverages, emphasizing the imperative for a well-devised remineralization protocol to counter demineralized surfaces.
UNASSIGNED: Seventy-three enamel specimens were taken. Forty samples were subjected to pre-operative hardness testing, and five samples were subjected to baseline EDX evaluation followed by grouping of samples (Group 1 = control Group; Group 2 = casein phosphopeptide-amorphous calcium phosphate fluoride [CPP-ACPF] Group; Group 3 = Biomin F Group; and Group 4 = self-assembling peptide [SAP] P-114 Group). A demineralization-remineralization cycle was carried out for 5 days followed by testing through Vickers Microhardness Tester, EDX Evaluation, and Scanning Electron Microscopy (SEM) Imaging. Statistical analysis was performed using one-way analysis of variance followed by intergroup analysis using Tukey\'s post hoc test with SPSS software 25.0 version.
UNASSIGNED: The mean percentage change in microhardness values was 30.05% in Group 1, 24.21% in Group 2, 18.85% in Group 3, and 12.08% in Group 4. The mean Ca/P ratio of samples tested through EDAX was 2.20 at baseline, 1.40 in Group 1 (Control Group), 1.62 in Group 2 (CPP-ACPF), 1.82 in Group 3 (Biomin F), and 2.01 in Group 4 (SAP-P114). Postintervention values were statistically significant from baseline values in both parameters.
UNASSIGNED: Curodont Protect exhibits superior efficacy, offering valuable insights for future in vivo studies and clinical applications. The multifaceted evaluation, encompassing microhardness testing, SEM analysis, and EDXS assessment, contributes to a nuanced interpretation of the agents\' impact, paving the way for informed decisions in clinical practice and future research endeavors.

OBJECTIVE: The objective of this in vitro study was to assess the efficiency of incorporating Biosilicate particles (30 and 50 mg) into an experimental orodispersible film and its efficacy in the remineralization process of bovine dental enamel under cariogenic and erosive challenges.
METHODS: Ninety-nine intact incisors, devoid of cracks or fractures, yielding 198 samples (6 × 6 × 2 mm) via vestibular sectioning using a low-speed diamond disc under water cooling. After flattening the enamel surface with 600, 1200, and 2000 grit sandpaper, the samples were divided into two groups based on the challenges they underwent: cariogenic (0.1 M lactic acid at pH 5.0) or erosive (0.05 M citric acid solution at pH 2.3). Samples from each challenge were further categorized into 11 groups (n = 9) according to the duration of cariogenic (3, 7, and 14 days) or erosive (3, 7, and 10 days) challenge, along with positive control groups (fragments untreated with challenges and treated with different Biosilicate concentrations) and negative controls (fragments treated with artificial saliva for the same periods established for cariogenic and erosive challenges). Treatments with orodispersible films containing Biosilicate (30 and 50 mg) were administered for 2 min per day for 15 days.
RESULTS: The highest remineralizing potential was observed in samples treated with Biosilicate after 14 days of cariogenic challenge, irrespective of the concentration tested. For samples subjected to erosive challenge, erosion time did not affect Biosilicate\'s remineralizing potential.
CONCLUSIONS: Biosilicate shows promise in terms of remineralizing potential in enamel subjected to cariogenic challenge due to its ability to form hydroxycarbonapatite in mineralized tissues.

The enamel surface may undergo demineralization due to exposure to acidic substances and the remineralization of the etched enamel is crucial to regain or maintain integrity. This study aimed to investigate the erosive effect of 10 acidic solutions on tooth enamel and the remineralization capacity of milk and artificial saliva by measuring surface roughness (Ra), enamel depth, and microhardness. A total of 80 bovine incisor enamel specimens were immersed in 10 different acidic solutions, including four different acidic drinks, three different citric acid solutions, and three different citric acid buffer solutions, for 1 h. After demineralization, the specimens were immersed in milk and artificial saliva for 3 h. Surface roughness, enamel abraded depth, and microhardness were measured before demineralization, in-between time intervals and after remineralization. Data were analyzed using Friedman and Kruskal-Wallis tests (p < 0.05). The results indicate a significant difference in surface roughness between the measurements taken at different time intervals, particularly between the baseline and after 1 h demineralization. Also, the specimens immersed in CAB1 exhibited greatest increase in Ra among other acidic solutions (Δ: 0.18 ± 0.07). Moreover, only the microhardness increased after remineralization (p < 0.05). Enamel demineralization using various acidic solutions revealed increased Ra and enamel abraded depth, and decreased microhardness. The use of remineralization agents, milk and artificial saliva, demonstrated an increase in microhardness. This study provides insights into the effects of different acidic solutions and potential remineralization agents on tooth enamel.

OBJECTIVE: The present study aimed to evaluate the effectiveness of bioactive glass (BAG) in preventing dental erosion in primary teeth.
METHODS: Enamel and dentin specimens (2 × 2 × 2 mm) were obtained from extracted primary teeth, which were randomly divided into the following groups based on the pretreatments (n = 12): DW (deionized water), NaF (2 % sodium fluoride), 2BAG (2 % BAG), 4BAG (4 % BAG), 6BAG (6 % BAG), and 8BAG (8 % BAG). The specimens were immersed in the respective solutions for 2 min and subjected to in vitro erosive challenges (4 × 5 min/d) for 5 d. The erosive enamel loss (EEL), erosive dentin loss (EDL), and the thickness of the demineralized organic matrix (DOM) were measured using a contact profilometer. The surface microhardness (SMH) was measured, and the percentage of SMH loss (%SMHL) was calculated. The surface morphology and mineral composition were evaluated by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively.
RESULTS: After the erosive challenges, the EEL, EDL, and%SMHL of the 2BAG, 4BAG, 6BAG, and 8BAG groups significantly reduced, with the greatest reduction was observed in the 6BAG (EEL: 6.5 ± 0.2 μm;%SMHL in enamel: 12.8 ± 2.6; EDL: 7.9 ± 0.3 μm; %SMHL in dentin: 22.1 ± 2.7) and 8BAG groups (EEL: 6.4 ± 0.4 μm;%SMHL in enamel: 11.0 ± 1.9; EDL: 7.8 ± 0.5 μm; %SMHL in dentin: 22.0 ± 2.5) (P < 0.05). With increasing BAG concentrations, the number of surface deposits containing Ca, P, and Si increased.
CONCLUSIONS: 6BAG was the most effective for preventing dental erosion in primary teeth and showed a particularly strong potential for dentin erosion prevention.
CONCLUSIONS: Bioactive glass, especially at a 6 % concentration, has proven effective in reducing erosive tooth wear and surface microhardness loss while also protecting demineralized organic matrix in primary dentin.

Heartburn is a common symptom shared by both gastroesophageal reflux disease (GERD) and functional heartburn (FHB), which can make it challenging to differentiate between the two conditions. However, examining oral manifestations of GERD can be a cost-effective and readily available method to aid in this differentiation process. It may serve as a valuable tool in distinguishing GERD from FHB.

OBJECTIVE: Previous studies on short- and long-term pellicles showed that the enamel pellicle provides partial protection against erosion. The aim of the present study was to investigate the protective properties of clinically relevant pellicles formed within 2 to 24 h. The hypothesis was that factors such as pellicle formation time, intraoral location, and acidic challenge severity would not influence the erosion-protective properties of the pellicle.
METHODS: Six subjects participated in the study. Bovine enamel specimens were prepared and intraorally exposed at buccal or palatal sites for 2, 6, 12, and 24 h to allow pellicle formation, followed by erosion using 0.1 % or 1 % citric acid. Calcium release and surface microhardness were measured, and specimens were analysed using scanning and transmission electron microscopy. Quantitative data were statistically analysed with three-way ANOVA and Tuckey\'s multiple comparison test (p = 0.05).
RESULTS: Pellicle formation time and intraoral location did not significantly influence the erosion-protective properties of the pellicle, while citric acid concentration significantly affected enamel erosion. The pellicle thickness increased with longer formation times and on buccal sites, but decreased or was entirely removed following treatment with 0.1 % or 1 % citric acid, respectively. The enamel surface exhibited a characteristic erosion pattern.
CONCLUSIONS: This study underscores the importance of investigating pellicle properties within the critical 2- to 24-h timeframe and highlights the significance of pellicle thickness in acid resistance.
CONCLUSIONS: These findings provide valuable insights into the factors influencing the protective properties of enamel pellicles and could guide preventive measures in dental practice.

BACKGROUND: This study aimed to evaluate dentin wear and biological performance of desensitizing materials.
METHODS: Seventy bovine root dentin blocks were sectioned. Half of the surface of each specimen was untreated (control) and the other half was immersed in EDTA and treated with the following desensitizing materials: placebo varnish (PLA), fluoride varnish (FLU), sodium fluoride (NaF) varnish + sodium trimetaphosphate (TMP), universal adhesive (SBU), S-PRG varnish (SPRG), biosilicate (BIOS), and amelotin solution (AMTN). After application, the specimens were submitted to an erosive-abrasive challenge and the wear analyzed by optical profilometer. Serial dilutions of extracts obtained from the culture medium containing discs impregnated with those desensitizers were applied on fibroblasts and odontoblasts-like cells cultures. Cytotoxicity and production of total protein (TP) by colorimetric assays were determined after 24 h. Data were statistically analyzed using Kruskal-Wallis, Dunn\'s, One-way ANOVA and Tukey tests (p ≤ 0.05).
RESULTS: No dentin wear was observed only for SBU. The lowest dentin wear was observed for AMTN and TMP. Cell viability was significantly reduced after treatment with undiluted extracts of PLA, FLU, TMP and SBU in fibroblasts and TMP and SBU in odontoblast-like cells. SPRG, BIOS and AMTN were cytocompatible at all dilutions tested. Considering TP results, no statistical difference was observed among the groups and high levels for TP were observed after TMP and FLU treatments.
CONCLUSIONS: Universal adhesive system may protect dentin with opened tubules from wear after challenge. Extracts of adhesive and fluoride varnishes presented cytotoxic mainly on fibroblasts. The enamel protein may be a future alternative to treat dentin with opened tubules because it may cause low wear under erosive-abrasive challenge with low cytotoxic effects.

UNASSIGNED: Dental erosion is a condition that results from exposure of the enamel and dentin to non-bacterial acids of extrinsic and intrinsic origin, causing mineral loss on the surface of the tooth. Occupational exposure to sulfuric acid fumes has been described in association with dental erosion in battery manufacturing industry workers. Hence, this study aimed to assess the dental erosion among battery factory workers in HBL Power Systems Ltd, Hyderabad.
UNASSIGNED: The sample consisted of 90 battery factory workers (62 males and 28 females). Demographic data with regard to age, gender, and length of exposure were recorded. Clinical examination was done to assess dental erosion using the tooth wear index given by Smith and Knight. Data were statistically analyzed by using Fisher exact test. P <0.05 was considered statistically significant.
UNASSIGNED: Among 90 workers examined, 43.3% showed prevalence of erosion with higher occurrence rate in females (54%) than males (38.7%). 66.6% of affected workers had erosion score of 1, and 33.4% showed erosion score of 2 and 3. We also observed statistically significant highest prevalence and increased severity of dental erosion in workers with prolonged duration of employment (>11 years).
UNASSIGNED: The present study revealed increased prevalence of dental erosion among battery factory workers. Hence, it highlights the importance of protective measures with efficient surveillance and monitoring in the workplace environment.