3D printing has revolutionized bone tissue engineering (BTE) by enabling the fabrication of patient- or defect-specific scaffolds to enhance bone regeneration. The superior biocompatibility, customizable bioactivity, and biodegradability have enabled calcium phosphate (CaP) to gain significance as a bone graft material. 3D-printed (3DP) CaP scaffolds allow precise drug delivery due to their porous structure, adaptable structure-property relationship, dynamic chemistry, and controlled dissolution. The effectiveness of conventional scaffold-based drug delivery is hampered by initial burst release and drug loss. This review summarizes different multifunctional drug delivery approaches explored in controlling drug release, including polymer coatings, formulation integration, microporous scaffold design, chemical crosslinking, and direct extrusion printing for BTE applications. The review also outlines perspectives and future challenges in drug delivery research, paving the way for next-generation bone repair methodologies.

Vascularization plays an important role in dental and craniofacial regenerations. Human periodontal ligament stem cells (hPDLSCs) are a promising cell source and, when co-cultured with human umbilical vein endothelial cells (hUVECs), could promote vascularization. The objectives of this study were to develop a novel prevascularized hPDLSC-hUVEC-calcium phosphate construct, and investigate the osteogenic and angiogenic efficacy of this construct with human platelet lysate (hPL) in cranial defects in rats for the first time.
hPDLSCs and hUVECs were co-cultured on calcium phosphate cement (CPC) scaffolds with hPL. Cell proliferation, angiogenic gene expression, angiogenesis, alkaline phosphatase activity, and cell-synthesized minerals were determined. Bone and vascular regenerations were investigated in rat critical-sized cranial defects in vivo.
hPDLSC-hUVEC-CPC-hPL group had 2-fold greater angiogenic expressions and cell-synthesized mineral synthesis than hPDLSC-hUVEC-CPC group (p < 0.05). Microcapillary-like structures were formed on scaffolds in vitro. hPDLSC-hUVEC-CPC-hPL group had more vessels than hPDLSC-hUVEC-CPC group (p < 0.05). In cranial defects in rats, hPDLSC-hUVEC-CPC-hPL group regenerated new bone amount that was 2.1 folds and 4.0 folds, respectively, that of hPDLSC-hUVEC-CPC group and CPC control (p < 0.05). New blood vessel density of hPDLSC-hUVEC-CPC-hPL group was 2 folds and 7.9 folds, respectively, that of hPDLSC-hUVEC-CPC group and CPC control (p < 0.05).
The hPL pre-culture method is promising to enhance bone regeneration via prevascularized CPC. Novel hPDLSC-hUVEC-CPC-hPL prevascularized construct increased new bone formation and blood vessel density by 4-8 folds over CPC control.
Novel hPDLSC-hUVEC-hPL-CPC prevascularized construct greatly increased bone and vascular regeneration in vivo and hence is promising for a wide range of craniofacial applications.

(1) Background: Vascularization remains a critical challenge in bone tissue engineering. The objective of this study was to prevascularize calcium phosphate cement (CPC) scaffold by co-culturing human periodontal ligament stem cells (hPDLSCs) and human umbilical vein endothelial cells (hUVECs) for the first time; (2) Methods: hPDLSCs and/or hUVECs were seeded on CPC scaffolds. Three groups were tested: (i) hUVEC group (hUVECs on CPC); (ii) hPDLSC group (hPDLSCs on CPC); (iii) co-culture group (hPDLSCs + hUVECs on CPC). Osteogenic differentiation, bone mineral synthesis, and microcapillary-like structures were evaluated; (3) Results: Angiogenic gene expressions of co-culture group were 6-9 fold those of monoculture. vWF expression of co-culture group was 3 times lower than hUVEC-monoculture group. Osteogenic expressions of co-culture group were 2-3 folds those of the hPDLSC-monoculture group. ALP activity and bone mineral synthesis of co-culture were much higher than hPDLSC-monoculture group. Co-culture group formed capillary-like structures at 14-21 days. Vessel length and junction numbers increased with time; (4) Conclusions: The hUVECs + hPDLSCs co-culture on CPC scaffold achieved excellent osteogenic and angiogenic capability in vitro for the first time, generating prevascularized networks. The hPDLSCs + hUVECs co-culture had much better osteogenesis and angiogenesis than monoculture. CPC scaffolds prevacularized via hPDLSCs + hUVECs are promising for dental, craniofacial, and orthopedic applications.

Staphylococcus aureus (S. aureus) is the major pathogen for osteomyelitis, which can lead to bone necrosis and destruction. There has been no report on antibacterial calcium phosphate cement (CPC) against S. aureus. The aims of this study were to: (1) develop novel antibacterial CPC-chitosan-alginate microbead scaffold; (2) investigate mechanical and antibacterial properties of CPC-chitosan-penicillin-alginate scaffold; (3) evaluate the encapsulation and delivery of human umbilical cord mesenchymal stem cells (hUCMSCs). Flexural strength, elastic modulus and work-of-fracture of the CPC-chitosan-penicillin-alginate microbeads scaffold and CPC-chitosan scaffold were evaluated. Penicillin release profile and antibacterial effects on S. aureus were determined. The hUCMSC delivery and release from penicillin-alginate microbeads were investigated. Injectable CPC-chitosan-penicillin-alginate microbeads scaffold was developed for the first time. CPC-chitosan-penicillin-alginate microbeads scaffold had a flexural strength of 3.16 ± 0.55 MPa, matching that of cancellous bone. With sustained penicillin release, the new scaffold had strong antibacterial effects on S. aureus, with an inhibition zone diameter of 32.2 ± 2.5 mm, greater than that of penicillin disk control (15.1 ± 2.0 mm) (p < 0.05). Furthermore, this injectable and antibacterial scaffold had no toxic effects, yielding excellent hUCMSC viability, which was similar to that of CPC control without antibacterial activity (p > 0.05). CPC-chitosan-penicillin-microbeads scaffold had injectability, good strength, strong antibacterial effects, and good biocompatibility to support stem cell viability for osteogenesis. CPC-chitosan-penicillin-microbeads scaffold is promising for dental, craniofacial and orthopedic applications to combat infections and promote bone regeneration.

Calcium phosphate cement (CPC), functionalized with iron oxide nanoparticles (IONP), is of great promise to promote osteoinduction and new bone formation. In this work, the IONP powder was added into the CPC powder to fabricate CPC + IONP scaffolds and the effects of the novel composite on bone matrix formation and osteogenesis of human dental pulp stem cells (hDPSCs) were explored. A series of CPC + IONP magnetic scaffolds with different IONP contents (1%, 3% and 6%) were fabricated using 5% chitosan solution as the cement liquid. Western blotting and RT-PCR were used to analyze the signaling pathway. The IONP incorporation substantially enhanced the performance of CPC + IONP, with increases in both mechanical strength and cellular activities. The IONP addition greatly promoted the osteogenesis of hDPSCs, elevating the ALP activity, the expression of osteogenic marker genes and bone matrix formation with 1.5-2-fold increases. The 3% IONP incorporation showed the most enhancement among all groups. Activation of the extracellular signal-related kinases WNT/β-catenin in DPSCs was observed, and this activation was attenuated by the WNT inhibitor DKK1. The results indicated that the osteogenic behavior of hDPSCs was likely driven by CPC + IONP via the WNT signaling pathway. In conclusion, incorporate IONP into CPC scaffold remarkably enhanced the spreading, osteogenic differentiation and bone mineral synthesis of stem cell. Therefore, this method had great potential for bone tissue engineering. The novel CPC + IONP composite scaffolds with stem cells are promising to provide an innovative strategy to enhance bone regenerative therapies.

Calcium phosphate cements (CPCs) mimic nanostructured bone minerals and are promising for dental, craniofacial and orthopedic applications. Vascularization plays a critical role in bone regeneration. This article represents the first review on cutting-edge research on prevascularization of CPC scaffolds to enhance bone regeneration.
This article first presented the prevascularization of CPC scaffolds. Then the co-culture of two cell types in CPC scaffolds was discussed. Subsequently, to further enhance the prevascularization efficacy, tri-culture of three different cell types in CPC scaffolds was presented.
(1) Arg-Gly-Asp (RGD) incorporation in CPC bone cement scaffold greatly enhanced cell affinity and bone prevascularization; (2) By introducing endothelial cells into the culture of osteogenic cells (co-culture of two different cell types, or bi-culture) in CPC scaffold, the bone defect area underwent much better angiogenic and osteogenic processes when compared to mono-culture; (3) Tri-culture with an additional cell type of perivascular cells (such as pericytes) resulted in a substantially enhanced prevascularization of CPC scaffolds in vitro and more new bone and blood vessels in vivo, compared to bi-culture. Furthermore, biological cell crosstalk and capillary-like structure formation made critical contributions to the bi-culture system. In addition, the pericytes in the tri-culture system substantially promoted stability and maturation of the primary vascular network.
The novel approach of CPC scaffolds with stem cell bi-culture and tri-culture is of great significance in the regeneration of dental, craniofacial and orthopedic defects in clinical practice.

Ectopic bone formation in mice is the gold standard for evaluation of osteogenic constructs. By regular procedures, usually only 4 constructs can be accommodated per mouse, limiting screening power. Combinatorial cassettes (combi-cassettes) hold up to 19 small, uniform constructs from the time of surgery, through time in vivo, and subsequent evaluation. Two types of bone tissue engineering constructs were tested in the combi-cassettes: i) a cell-scaffold construct containing primary human bone marrow stromal cells with hydroxyapatite/tricalcium phosphate particles (hBMSCs + HA/TCP) and ii) a growth factor-scaffold construct containing bone morphogenetic protein 2 in a gelatin sponge (BMP2+GS). Measurements of bone formation by histology, bone formation by X-ray microcomputed tomography (μCT) and gene expression by quantitative polymerase chain reaction (qPCR) showed that constructs in combi-cassettes were similar to those created by regular procedures. Combi-cassettes afford placement of multiple replicates of multiple formulations into the same animal, which enables, for the first time, rigorous statistical assessment of: 1) the variability for a given formulation within an animal (intra-animal variability), 2) differences between different tissue-engineered formulations within the same animal and 3) the variability for a given formulation in different animals (inter-animal variability). Combi-cassettes enable a more high-throughput, systematic approach to in vivo studies of tissue engineering constructs.

The increasing demand for bone repair solutions calls for the development of efficacious bone scaffolds. Biphasic calcium phosphate (BCP) scaffolds with both macropores and micropores (MP) have improved healing compared to those with macropores and no micropores (NMP), but the role of micropores is unclear. Here, we evaluate capillarity induced by micropores as a mechanism that can affect bone growth in vivo. Three groups of cylindrical scaffolds were implanted in pig mandibles for three weeks: MP were implanted either dry (MP-Dry), or after submersion in phosphate buffered saline, which fills pores with fluid and therefore suppresses micropore-induced capillarity (MP-Wet); NMP were implanted dry. The amount and distribution of bone in the scaffolds were quantified using micro-computed tomography. MP-Dry had a more homogeneous bone distribution than MP-Wet, although the average bone volume fraction, BVF‾, was not significantly different for these two groups (0.45±0.03 and 0.37±0.03, respectively). There was no significant difference in the radial bone distribution of NMP and MP-Wet, but the BVF‾, of NMP was significantly lower among the three groups (0.25±0.02). These results suggest that micropore-induced capillarity enhances bone regeneration by improving the homogeneity of bone distribution in BCP scaffolds. The explicit design and use of capillarity in bone scaffolds may lead to more effective treatments of large and complex bone defects.
The increasing demand for bone repair calls for more efficacious bone scaffolds and calcium phosphate-based materials are considered suitable for this application. Macropores (>100μm) are necessary for bone ingrowth and vascularization. However, studies have shown that microporosity (<20μm) also enhances growth, but there is no consensus on the controlling mechanisms. In previous in vitro work, we suggested that micropore-induced capillarity had the potential to enhance bone growth in vivo. This work illustrates the positive effects of capillarity on bone regeneration in vivo; it demonstrates that micropore-induced capillarity significantly enhances the bone distribution in the scaffold. The results will impact the design of scaffolds to better exploit capillarity and improve treatments for large and load-bearing bone defects.

BACKGROUND: Osteoradionecrosis of the jaw is a major side-effect of radiotherapy used in the treatment of squamous cell carcinomas of the upper aerodigestive tract. The standard reconstruction procedure is a free flap transfer of autogenous bone. A new approach using a tissue engineering strategy has shown that total bone marrow (TBM) associated with biphasic calcium phosphate (BCP) is the best combination for bone regeneration in an irradiated area. Recently, the stromal vascular fraction from adipose tissue (SVF) was described as an alternative to TBM for promoting new bone formation. The aim of this study was to identify the capacity of a freshly isolated SVF to induce new bone formation in an irradiated area.
METHODS: Four weeks after irradiation of the hind limbs of 15 rats, bone defects were created and filled with either SVF or TBM with and without BCP.
RESULTS: Three weeks after the implantations, analysis showed that the BCP-TBM mixture improved new bone formation after radiation (p < 0.05). The BCP-SVF association induced significant neoangiogenesis but failed to enhance new bone formation.
CONCLUSIONS: The BCP-SVF mixture was insufficient to enhance new bone formation in the irradiated area, suggesting that the role of the environment might be crucial for ossification.

Human induced pluripotent stem cells (hiPSCs) are an exciting cell source with great potential for tissue engineering. Human bone marrow mesenchymal stem cells (hBMSCs) have been used in clinics but are limited by several disadvantages, hence alternative sources of MSCs such as umbilical cord MSCs (hUCMSCs) are being investigated. However, there has been no report comparing hiPSCs, hUCMSCs and hBMSCs for bone regeneration. The objectives of this pilot study were to investigate hiPSCs, hUCMSCs and hBMSCs for bone tissue engineering, and compare their bone regeneration via seeding on biofunctionalized macroporous calcium phosphate cement (CPC) in rat cranial defects. For all three types of cells, approximately 90% of the cells remained alive on CPC scaffolds. Osteogenic genes were up-regulated, and mineral synthesis by cells increased with time in vitro for all three types of cells. The new bone area fractions at 12weeks (mean±sd; n=6) were (30.4±5.8)%, (27.4±9.7)% and (22.6±4.7)% in hiPSC-MSC-CPC, hUCMSC-CPC and hBMSC-CPC respectively, compared to (11.0±6.3)% for control (p<0.05). No significant differences were detected among the three types of stem cells (p>0.1). New blood vessel density was higher in cell-seeded groups than control (p<0.05). De novo bone formation and participation by implanted cells was confirmed via immunohistochemical staining. In conclusion, (1) hiPSCs, hUCMSCs and hBMSCs greatly enhanced bone regeneration, more than doubling the new bone amount of cell-free CPC control; (2) hiPSC-MSCs and hUCMSCs represented viable alternatives to hBMSCs; (3) biofunctionalized macroporous CPC-stem cell constructs had a robust capacity for bone regeneration.